From: Naveen Singh <navesing@qca.qualcomm.com>
Date: Thu, 7 Jun 2012 07:44:02 +0000 (-0700)
Subject: ath6kl: use firmware version from FW IE
X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=b5b6f6a9a07ac230d54a85a9fb9e691c85f2eb0a;p=~shefty%2Frdma-dev.git

ath6kl: use firmware version from FW IE

Need to have different FW versioning for different FW binaries.
This is handled by appending different meta data in firmware
binaries.

kvalo: add an empty line before a debug message, use '0' instead of '0x00',
fix indentation

Signed-off-by: Naveen Singh <navesing@qca.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
---

diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c
index daf24ee9d28..62e25ccd101 100644
--- a/drivers/net/wireless/ath/ath6kl/init.c
+++ b/drivers/net/wireless/ath/ath6kl/init.c
@@ -943,6 +943,14 @@ static int ath6kl_fetch_fw_apin(struct ath6kl *ar, const char *name)
 		}
 
 		switch (ie_id) {
+		case ATH6KL_FW_IE_FW_VERSION:
+			strlcpy(ar->wiphy->fw_version, data,
+				sizeof(ar->wiphy->fw_version));
+
+			ath6kl_dbg(ATH6KL_DBG_BOOT,
+				   "found fw version %s\n",
+				    ar->wiphy->fw_version);
+			break;
 		case ATH6KL_FW_IE_OTP_IMAGE:
 			ath6kl_dbg(ATH6KL_DBG_BOOT, "found otp image ie (%zd B)\n",
 				   ie_len);
diff --git a/drivers/net/wireless/ath/ath6kl/main.c b/drivers/net/wireless/ath/ath6kl/main.c
index 3e6768ae80a..45621baca24 100644
--- a/drivers/net/wireless/ath/ath6kl/main.c
+++ b/drivers/net/wireless/ath/ath6kl/main.c
@@ -554,20 +554,24 @@ void ath6kl_ready_event(void *devt, u8 *datap, u32 sw_ver, u32 abi_ver,
 	struct ath6kl *ar = devt;
 
 	memcpy(ar->mac_addr, datap, ETH_ALEN);
-	ath6kl_dbg(ATH6KL_DBG_TRC, "%s: mac addr = %pM\n",
-		   __func__, ar->mac_addr);
+
+	ath6kl_dbg(ATH6KL_DBG_BOOT,
+		   "ready event mac addr %pM sw_ver 0x%x abi_ver 0x%x cap 0x%x\n",
+		   ar->mac_addr, sw_ver, abi_ver, cap);
 
 	ar->version.wlan_ver = sw_ver;
 	ar->version.abi_ver = abi_ver;
 	ar->hw.cap = cap;
 
-	snprintf(ar->wiphy->fw_version,
-		 sizeof(ar->wiphy->fw_version),
-		 "%u.%u.%u.%u",
-		 (ar->version.wlan_ver & 0xf0000000) >> 28,
-		 (ar->version.wlan_ver & 0x0f000000) >> 24,
-		 (ar->version.wlan_ver & 0x00ff0000) >> 16,
-		 (ar->version.wlan_ver & 0x0000ffff));
+	if (strlen(ar->wiphy->fw_version) == 0) {
+		snprintf(ar->wiphy->fw_version,
+			 sizeof(ar->wiphy->fw_version),
+			 "%u.%u.%u.%u",
+			 (ar->version.wlan_ver & 0xf0000000) >> 28,
+			 (ar->version.wlan_ver & 0x0f000000) >> 24,
+			 (ar->version.wlan_ver & 0x00ff0000) >> 16,
+			 (ar->version.wlan_ver & 0x0000ffff));
+	}
 
 	/* indicate to the waiting thread that the ready event was received */
 	set_bit(WMI_READY, &ar->flag);