From: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Date: Mon, 25 Mar 2013 13:51:15 +0000 (+0200)
Subject: serial: of_serial: Handle auto-flow-control property
X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=b0b8c84cf58d2486d48f486b5c47af7a7a33a497;p=~shefty%2Frdma-dev.git

serial: of_serial: Handle auto-flow-control property

Automatic Flow Control capability is not tied to this
property. This is only one way of detecting it. The property
is limited to be used only with 8250 driver.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/Documentation/devicetree/bindings/tty/serial/of-serial.txt b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
index c13f0ce74da..1928a3e83cd 100644
--- a/Documentation/devicetree/bindings/tty/serial/of-serial.txt
+++ b/Documentation/devicetree/bindings/tty/serial/of-serial.txt
@@ -34,6 +34,9 @@ Optional properties:
 - no-loopback-test: set to indicate that the port does not implements loopback
   test mode
 - fifo-size: the fifo size of the UART.
+- auto-flow-control: one way to enable automatic flow control support. The
+  driver is allowed to detect support for the capability even without this
+  property.
 
 Example:
 
diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c
index 267711b5cb4..39c7ea4cb14 100644
--- a/drivers/tty/serial/of_serial.c
+++ b/drivers/tty/serial/of_serial.c
@@ -14,7 +14,6 @@
 #include <linux/slab.h>
 #include <linux/delay.h>
 #include <linux/serial_core.h>
-#include <linux/serial_8250.h>
 #include <linux/serial_reg.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -22,6 +21,8 @@
 #include <linux/nwpserial.h>
 #include <linux/clk.h>
 
+#include "8250/8250.h"
+
 struct of_serial_info {
 	struct clk *clk;
 	int type;
@@ -171,11 +172,17 @@ static int of_platform_serial_probe(struct platform_device *ofdev)
 #ifdef CONFIG_SERIAL_8250
 	case PORT_8250 ... PORT_MAX_8250:
 	{
-		/* For now the of bindings don't support the extra
-		   8250 specific bits */
 		struct uart_8250_port port8250;
 		memset(&port8250, 0, sizeof(port8250));
 		port8250.port = port;
+
+		if (port.fifosize)
+			port8250.capabilities = UART_CAP_FIFO;
+
+		if (of_property_read_bool(ofdev->dev.of_node,
+					  "auto-flow-control"))
+			port8250.capabilities |= UART_CAP_AFE;
+
 		ret = serial8250_register_8250_port(&port8250);
 		break;
 	}