From: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Date: Mon, 7 Oct 2013 15:12:23 +0000 (+0200)
Subject: ARM: dts: omap3-igep: Add USB OTG support
X-Git-Tag: v3.13-rc1~156^2~19^2^2~5
X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=aa496bde78b9e6d1124b69b9f49acf4ee7d6b282;p=~emulex%2Finfiniband.git

ARM: dts: omap3-igep: Add USB OTG support

Commit ad871c10b ("ARM: dts: OMAP: Add usb_otg and glue data to O
added USB OTG support for most OMAP boards but some OMAP3 boards
such as IGEP boards were not updated. This patch adds an USB OTG
device node to these board.

Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk>
Tested-by: Enric Balletbo i Serra <eballetbo@gmail.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
---

diff --git a/arch/arm/boot/dts/omap3-igep.dtsi b/arch/arm/boot/dts/omap3-igep.dtsi
index 0f92224dc4f..ba1e58b7b7e 100644
--- a/arch/arm/boot/dts/omap3-igep.dtsi
+++ b/arch/arm/boot/dts/omap3-igep.dtsi
@@ -143,3 +143,12 @@
 &twl_gpio {
 	ti,use-leds;
 };
+
+&usb_otg_hs {
+	interface-type = <0>;
+	usb-phy = <&usb2_phy>;
+	phys = <&usb2_phy>;
+	phy-names = "usb2-phy";
+	mode = <3>;
+	power = <50>;
+};