From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 3 Feb 2014 12:51:50 +0000 (+0200)
Subject: ASoC: davinci-mcasp: Code cleanup in davinci_mcasp_hw_params()
X-Git-Tag: v3.15-rc1~36^2~1^2~5^2~6^5~3
X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=a7e46bd9a19c1e0058c7c8c0b4cc3e6cf101e12a;p=~emulex%2Finfiniband.git

ASoC: davinci-mcasp: Code cleanup in davinci_mcasp_hw_params()

Rearrange the code in the function for readability.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@linaro.org>
---

diff --git a/sound/soc/davinci/davinci-mcasp.c b/sound/soc/davinci/davinci-mcasp.c
index 0518ff2d960..63b1ecc97cb 100644
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -611,10 +611,8 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
 	u8 fifo_level;
 	u8 slots = mcasp->tdm_slots;
 	u8 active_serializers;
-	int channels;
+	int channels = params_channels(params);
 	int ret;
-	struct snd_interval *pcm_channels = hw_param_interval(params,
-					SNDRV_PCM_HW_PARAM_CHANNELS);
 
 	/* If mcasp is BCLK master we need to set BCLK divider */
 	if (mcasp->bclk_master) {
@@ -627,19 +625,10 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
 			cpu_dai, 1, mcasp->sysclk_freq / bclk_freq);
 	}
 
-	channels = pcm_channels->min;
-
-	active_serializers = (channels + slots - 1) / slots;
-
 	ret = mcasp_common_hw_param(mcasp, substream->stream, channels);
 	if (ret)
 		return ret;
 
-	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-		fifo_level = mcasp->txnumevt * active_serializers;
-	else
-		fifo_level = mcasp->rxnumevt * active_serializers;
-
 	if (mcasp->op_mode == DAVINCI_MCASP_DIT_MODE)
 		ret = mcasp_dit_hw_param(mcasp);
 	else
@@ -680,6 +669,13 @@ static int davinci_mcasp_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
+	/* Calculate FIFO level */
+	active_serializers = (channels + slots - 1) / slots;
+	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+		fifo_level = mcasp->txnumevt * active_serializers;
+	else
+		fifo_level = mcasp->rxnumevt * active_serializers;
+
 	if (mcasp->version == MCASP_VERSION_2 && !fifo_level)
 		dma_params->acnt = 4;
 	else