From: Fabio Baltieri Date: Wed, 3 Apr 2013 14:02:26 +0000 (+0200) Subject: usb: phy: twl4030-usb: check regulator_enable return value X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=9ec602ecb199653a16e1eb909551b7ba77d79922;p=~shefty%2Frdma-dev.git usb: phy: twl4030-usb: check regulator_enable return value Since regulator_enable() is going to be marked as __must_check in the next merge window, always check regulator_enable() return value and print a warning if it fails. Reviewed-by: Kalle Jokiniemi Signed-off-by: Fabio Baltieri Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/phy/phy-twl4030-usb.c b/drivers/usb/phy/phy-twl4030-usb.c index 3f9858fbebc..13e17ae5ecd 100644 --- a/drivers/usb/phy/phy-twl4030-usb.c +++ b/drivers/usb/phy/phy-twl4030-usb.c @@ -384,9 +384,17 @@ static void __twl4030_phy_power(struct twl4030_usb *twl, int on) static void twl4030_phy_power(struct twl4030_usb *twl, int on) { + int ret; + if (on) { - regulator_enable(twl->usb3v1); - regulator_enable(twl->usb1v8); + ret = regulator_enable(twl->usb3v1); + if (ret) + dev_err(twl->dev, "Failed to enable usb3v1\n"); + + ret = regulator_enable(twl->usb1v8); + if (ret) + dev_err(twl->dev, "Failed to enable usb1v8\n"); + /* * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP * in twl4030) resets the VUSB_DEDICATED2 register. This reset @@ -395,7 +403,11 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) * is re-activated. This ensures that VUSB3V1 is really active. */ twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); - regulator_enable(twl->usb1v5); + + ret = regulator_enable(twl->usb1v5); + if (ret) + dev_err(twl->dev, "Failed to enable usb1v5\n"); + __twl4030_phy_power(twl, 1); twl4030_usb_write(twl, PHY_CLK_CTRL, twl4030_usb_read(twl, PHY_CLK_CTRL) |