From: JJ Ding Date: Fri, 9 Sep 2011 17:27:42 +0000 (-0700) Subject: Input: elantech - remove ETP_EDGE_FUZZ_V2 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=8a360d09b14514139b883d970cd3a1b0b63e6717;p=~shefty%2Frdma-dev.git Input: elantech - remove ETP_EDGE_FUZZ_V2 Don't try to be too clever and remove ETP_EDGE_FUZZ_V2. X, Y ranges should be just the raw resolution of the device. Otherwise, they can cause underflow on the Y axis. Suggested-by: Éric Piel Signed-off-by: JJ Ding Acked-by: Daniel Kurtz Acked-by: Éric Piel Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h index b54ea27d10a..d9e614409f9 100644 --- a/drivers/input/mouse/elantech.h +++ b/drivers/input/mouse/elantech.h @@ -66,16 +66,13 @@ #define ETP_YMAX_V1 (384 - ETP_EDGE_FUZZ_V1) /* - * It seems the resolution for hardware version 2 doubled. - * Hence the X and Y ranges are doubled too. - * The bezel around the pad also appears to be smaller + * The resolution for older v2 hardware doubled. + * (newer v2's firmware provides command so we can query) */ -#define ETP_EDGE_FUZZ_V2 8 - -#define ETP_XMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) -#define ETP_XMAX_V2 (1152 - ETP_EDGE_FUZZ_V2) -#define ETP_YMIN_V2 ( 0 + ETP_EDGE_FUZZ_V2) -#define ETP_YMAX_V2 ( 768 - ETP_EDGE_FUZZ_V2) +#define ETP_XMIN_V2 0 +#define ETP_XMAX_V2 1152 +#define ETP_YMIN_V2 0 +#define ETP_YMAX_V2 768 #define ETP_PMIN_V2 0 #define ETP_PMAX_V2 255