From: Patrice Chotard Date: Wed, 3 Apr 2013 08:45:11 +0000 (+0200) Subject: usb: phy: ab8500-usb: adopt pinctrl support X-Git-Tag: v3.10-rc1~190^2~63^2~19 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=899f0f561b51506f40eb78c9c4aaeeabf97cf35c;p=~emulex%2Finfiniband.git usb: phy: ab8500-usb: adopt pinctrl support Amend the ab8500-usb driver to optionally take a pin control handle and set the state of the pins to "default" on ab8500_usb_phy_enable and to "sleep" on ab8500_usb_phy_disable. The pinctrl handle is released on ab8500_usb_phy_disable because USB pins are shared with ab8505_micro_usb_iddet driver. Signed-off-by: Patrice Chotard Acked-by: Linus Walleij Signed-off-by: Fabio Baltieri Signed-off-by: Felipe Balbi --- diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c index 888dad65bf9..90a3278d282 100644 --- a/drivers/usb/phy/phy-ab8500-usb.c +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -33,6 +33,7 @@ #include #include #include +#include /* Bank AB8500_SYS_CTRL2_BLOCK */ #define AB8500_MAIN_WD_CTRL_REG 0x01 @@ -132,6 +133,8 @@ struct ab8500_usb { struct regulator *v_ulpi; int saved_v_ulpi; int previous_link_status_state; + struct pinctrl *pinctrl; + struct pinctrl_state *pins_sleep; }; static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x) @@ -240,6 +243,11 @@ static void ab8500_usb_phy_enable(struct ab8500_usb *ab, bool sel_host) bit = sel_host ? AB8500_BIT_PHY_CTRL_HOST_EN : AB8500_BIT_PHY_CTRL_DEVICE_EN; + /* mux and configure USB pins to DEFAULT state */ + ab->pinctrl = pinctrl_get_select(ab->dev, PINCTRL_STATE_DEFAULT); + if (IS_ERR(ab->pinctrl)) + dev_err(ab->dev, "could not get/set default pinstate\n"); + ab8500_usb_regulator_enable(ab); abx500_mask_and_set_register_interruptible(ab->dev, @@ -263,6 +271,22 @@ static void ab8500_usb_phy_disable(struct ab8500_usb *ab, bool sel_host) ab8500_usb_wd_workaround(ab); ab8500_usb_regulator_disable(ab); + + if (!IS_ERR(ab->pinctrl)) { + /* configure USB pins to SLEEP state */ + ab->pins_sleep = pinctrl_lookup_state(ab->pinctrl, + PINCTRL_STATE_SLEEP); + + if (IS_ERR(ab->pins_sleep)) + dev_dbg(ab->dev, "could not get sleep pinstate\n"); + else if (pinctrl_select_state(ab->pinctrl, ab->pins_sleep)) + dev_err(ab->dev, "could not set pins to sleep state\n"); + + /* as USB pins are shared with idddet, release them to allow + * iddet to request them + */ + pinctrl_put(ab->pinctrl); + } } #define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_enable(ab, true)