From: Matthew Wilcox Date: Wed, 30 Nov 2005 04:08:31 +0000 (-0500) Subject: [SCSI] sym2: Manage sym_lcb properly X-Git-Tag: v2.6.16-rc1~474^2~22^2~8^2~58 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=84e203a279d3de1c8a41a73ab45e55a89bc19345;p=~emulex%2Finfiniband.git [SCSI] sym2: Manage sym_lcb properly Allocate the lcb in slave_alloc and free it in slave_destroy. This allows us to remove all the code that checks to see if it's already been allocated. From: Christoph Hellwig Signed-off-by: Matthew Wilcox Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c index 7fc0b97173e..a2bfdf8417a 100644 --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -563,10 +563,7 @@ int sym_setup_data_and_start(struct sym_hcb *np, struct scsi_cmnd *cmd, struct s /* * activate this job. */ - if (lp) - sym_start_next_ccbs(np, lp, 2); - else - sym_put_start_queue(np, cp); + sym_start_next_ccbs(np, lp, 2); return 0; out_abort: @@ -981,15 +978,13 @@ static int device_queue_depth(struct sym_hcb *np, int target, int lun) static int sym53c8xx_slave_alloc(struct scsi_device *sdev) { - struct sym_hcb *np; - struct sym_tcb *tp; + struct sym_hcb *np = sym_get_hcb(sdev->host); + struct sym_tcb *tp = &np->target[sdev->id]; + struct sym_lcb *lp; if (sdev->id >= SYM_CONF_MAX_TARGET || sdev->lun >= SYM_CONF_MAX_LUN) return -ENXIO; - np = sym_get_hcb(sdev->host); - tp = &np->target[sdev->id]; - /* * Fail the device init if the device is flagged NOSCAN at BOOT in * the NVRAM. This may speed up boot and maintain coherency with @@ -1005,6 +1000,10 @@ static int sym53c8xx_slave_alloc(struct scsi_device *sdev) return -ENXIO; } + lp = sym_alloc_lcb(np, sdev->id, sdev->lun); + if (!lp) + return -ENOMEM; + tp->starget = sdev->sdev_target; return 0; } @@ -1012,21 +1011,13 @@ static int sym53c8xx_slave_alloc(struct scsi_device *sdev) /* * Linux entry point for device queue sizing. */ -static int sym53c8xx_slave_configure(struct scsi_device *device) +static int sym53c8xx_slave_configure(struct scsi_device *sdev) { - struct sym_hcb *np = sym_get_hcb(device->host); - struct sym_tcb *tp = &np->target[device->id]; - struct sym_lcb *lp; + struct sym_hcb *np = sym_get_hcb(sdev->host); + struct sym_tcb *tp = &np->target[sdev->id]; + struct sym_lcb *lp = sym_lp(tp, sdev->lun); int reqtags, depth_to_use; - /* - * Allocate the LCB if not yet. - * If it fail, we may well be in the sh*t. :) - */ - lp = sym_alloc_lcb(np, device->id, device->lun); - if (!lp) - return -ENOMEM; - /* * Get user flags. */ @@ -1038,10 +1029,10 @@ static int sym53c8xx_slave_configure(struct scsi_device *device) * Use at least 2. * Donnot use more than our maximum. */ - reqtags = device_queue_depth(np, device->id, device->lun); + reqtags = device_queue_depth(np, sdev->id, sdev->lun); if (reqtags > tp->usrtags) reqtags = tp->usrtags; - if (!device->tagged_supported) + if (!sdev->tagged_supported) reqtags = 0; #if 1 /* Avoid to locally queue commands for no good reasons */ if (reqtags > SYM_CONF_MAX_TAG) @@ -1050,19 +1041,30 @@ static int sym53c8xx_slave_configure(struct scsi_device *device) #else depth_to_use = (reqtags ? SYM_CONF_MAX_TAG : 2); #endif - scsi_adjust_queue_depth(device, - (device->tagged_supported ? + scsi_adjust_queue_depth(sdev, + (sdev->tagged_supported ? MSG_SIMPLE_TAG : 0), depth_to_use); lp->s.scdev_depth = depth_to_use; - sym_tune_dev_queuing(tp, device->lun, reqtags); + sym_tune_dev_queuing(tp, sdev->lun, reqtags); - if (!spi_initial_dv(device->sdev_target)) - spi_dv_device(device); + if (!spi_initial_dv(sdev->sdev_target)) + spi_dv_device(sdev); return 0; } +static void sym53c8xx_slave_destroy(struct scsi_device *sdev) +{ + struct sym_hcb *np = sym_get_hcb(sdev->host); + struct sym_lcb *lp = sym_lp(&np->target[sdev->id], sdev->lun); + + if (lp->itlq_tbl) + sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK * 4, "ITLQ_TBL"); + kfree(lp->cb_tags); + sym_mfree_dma(lp, sizeof(*lp), "LCB"); +} + /* * Linux entry point for info() function */ @@ -1926,6 +1928,7 @@ static struct scsi_host_template sym2_template = { .queuecommand = sym53c8xx_queue_command, .slave_alloc = sym53c8xx_slave_alloc, .slave_configure = sym53c8xx_slave_configure, + .slave_destroy = sym53c8xx_slave_destroy, .eh_abort_handler = sym53c8xx_eh_abort_handler, .eh_device_reset_handler = sym53c8xx_eh_device_reset_handler, .eh_bus_reset_handler = sym53c8xx_eh_bus_reset_handler, diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.c b/drivers/scsi/sym53c8xx_2/sym_hipd.c index 113e3b35716..bec644850d3 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.c +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.c @@ -1523,7 +1523,7 @@ static int sym_prepare_nego(struct sym_hcb *np, struct sym_ccb *cp, u_char *msgp /* * Insert a job into the start queue. */ -void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp) +static void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp) { u_short qidx; @@ -4664,30 +4664,7 @@ struct sym_ccb *sym_get_ccb (struct sym_hcb *np, struct scsi_cmnd *cmd, u_char t goto out; cp = sym_que_entry(qp, struct sym_ccb, link_ccbq); -#ifndef SYM_OPT_HANDLE_DEVICE_QUEUEING - /* - * If the LCB is not yet available and the LUN - * has been probed ok, try to allocate the LCB. - */ - if (!lp && sym_is_bit(tp->lun_map, ln)) { - lp = sym_alloc_lcb(np, tn, ln); - if (!lp) - goto out_free; - } -#endif - - /* - * If the LCB is not available here, then the - * logical unit is not yet discovered. For those - * ones only accept 1 SCSI IO per logical unit, - * since we cannot allow disconnections. - */ - if (!lp) { - if (!sym_is_bit(tp->busy0_map, ln)) - sym_set_bit(tp->busy0_map, ln); - else - goto out_free; - } else { + { /* * If we have been asked for a tagged command. */ @@ -4840,12 +4817,6 @@ void sym_free_ccb (struct sym_hcb *np, struct sym_ccb *cp) lp->head.resel_sa = cpu_to_scr(SCRIPTB_BA(np, resel_bad_lun)); } - /* - * Otherwise, we only accept 1 IO per LUN. - * Clear the bit that keeps track of this IO. - */ - else - sym_clr_bit(tp->busy0_map, cp->lun); /* * We donnot queue more than 1 ccb per target @@ -4997,20 +4968,7 @@ static void sym_init_tcb (struct sym_hcb *np, u_char tn) struct sym_lcb *sym_alloc_lcb (struct sym_hcb *np, u_char tn, u_char ln) { struct sym_tcb *tp = &np->target[tn]; - struct sym_lcb *lp = sym_lp(tp, ln); - - /* - * Already done, just return. - */ - if (lp) - return lp; - - /* - * Donnot allow LUN control block - * allocation for not probed LUNs. - */ - if (!sym_is_bit(tp->lun_map, ln)) - return NULL; + struct sym_lcb *lp = NULL; /* * Initialize the target control block if not yet. @@ -5082,13 +5040,7 @@ struct sym_lcb *sym_alloc_lcb (struct sym_hcb *np, u_char tn, u_char ln) lp->started_max = SYM_CONF_MAX_TASK; lp->started_limit = SYM_CONF_MAX_TASK; #endif - /* - * If we are busy, count the IO. - */ - if (sym_is_bit(tp->busy0_map, ln)) { - lp->busy_itl = 1; - sym_clr_bit(tp->busy0_map, ln); - } + fail: return lp; } @@ -5102,12 +5054,6 @@ static void sym_alloc_lcb_tags (struct sym_hcb *np, u_char tn, u_char ln) struct sym_lcb *lp = sym_lp(tp, ln); int i; - /* - * If LCB not available, try to allocate it. - */ - if (!lp && !(lp = sym_alloc_lcb(np, tn, ln))) - goto fail; - /* * Allocate the task table and and the tag allocation * circular buffer. We want both or none. @@ -5481,8 +5427,7 @@ finish: /* * Donnot start more than 1 command after an error. */ - if (lp) - sym_start_next_ccbs(np, lp, 1); + sym_start_next_ccbs(np, lp, 1); #endif } @@ -5520,12 +5465,6 @@ void sym_complete_ok (struct sym_hcb *np, struct sym_ccb *cp) tp = &np->target[cp->target]; lp = sym_lp(tp, cp->lun); - /* - * Assume device discovered on first success. - */ - if (!lp) - sym_set_bit(tp->lun_map, cp->lun); - /* * If all data have been transferred, given than no * extended error did occur, there is no residual. @@ -5578,7 +5517,7 @@ if (resid) /* * Requeue a couple of awaiting scsi commands. */ - if (lp && !sym_que_empty(&lp->waiting_ccbq)) + if (!sym_que_empty(&lp->waiting_ccbq)) sym_start_next_ccbs(np, lp, 2); #endif /* @@ -5821,8 +5760,7 @@ void sym_hcb_free(struct sym_hcb *np) SYM_QUEHEAD *qp; struct sym_ccb *cp; struct sym_tcb *tp; - struct sym_lcb *lp; - int target, lun; + int target; if (np->scriptz0) sym_mfree_dma(np->scriptz0, np->scriptz_sz, "SCRIPTZ0"); @@ -5848,16 +5786,6 @@ void sym_hcb_free(struct sym_hcb *np) for (target = 0; target < SYM_CONF_MAX_TARGET ; target++) { tp = &np->target[target]; - for (lun = 0 ; lun < SYM_CONF_MAX_LUN ; lun++) { - lp = sym_lp(tp, lun); - if (!lp) - continue; - if (lp->itlq_tbl) - sym_mfree_dma(lp->itlq_tbl, SYM_CONF_MAX_TASK*4, - "ITLQ_TBL"); - kfree(lp->cb_tags); - sym_mfree_dma(lp, sizeof(*lp), "LCB"); - } #if SYM_CONF_MAX_LUN > 1 kfree(tp->lunmp); #endif diff --git a/drivers/scsi/sym53c8xx_2/sym_hipd.h b/drivers/scsi/sym53c8xx_2/sym_hipd.h index 3a264a40821..756008812aa 100644 --- a/drivers/scsi/sym53c8xx_2/sym_hipd.h +++ b/drivers/scsi/sym53c8xx_2/sym_hipd.h @@ -416,19 +416,6 @@ struct sym_tcb { struct sym_lcb **lunmp; /* Other LCBs [1..MAX_LUN] */ #endif - /* - * Bitmap that tells about LUNs that succeeded at least - * 1 IO and therefore assumed to be a real device. - * Avoid useless allocation of the LCB structure. - */ - u32 lun_map[(SYM_CONF_MAX_LUN+31)/32]; - - /* - * Bitmap that tells about LUNs that haven't yet an LCB - * allocated (not discovered or LCB allocation failed). - */ - u32 busy0_map[(SYM_CONF_MAX_LUN+31)/32]; - #ifdef SYM_HAVE_STCB /* * O/S specific data structure. @@ -1077,7 +1064,6 @@ char *sym_driver_name(void); void sym_print_xerr(struct scsi_cmnd *cmd, int x_status); int sym_reset_scsi_bus(struct sym_hcb *np, int enab_int); struct sym_chip *sym_lookup_chip_table(u_short device_id, u_char revision); -void sym_put_start_queue(struct sym_hcb *np, struct sym_ccb *cp); #ifdef SYM_OPT_HANDLE_DEVICE_QUEUEING void sym_start_next_ccbs(struct sym_hcb *np, struct sym_lcb *lp, int maxn); #endif