From: Arnd Bergmann <arnd@arndb.de>
Date: Mon, 27 Jun 2011 11:45:16 +0000 (+0000)
Subject: serial/8250: Move UPIO_TSI to powerpc
X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=7df5659eefad9b6d457ccdee016bd78bd064cfc0;p=~shefty%2Frdma-dev.git

serial/8250: Move UPIO_TSI to powerpc

This iotype is only used by the legacy_serial code in powerpc, so the
code should live there, rather than be compiled in for every 8250
driver.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev@lists.ozlabs.org
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: linux-serial@vger.kernel.org
Acked-by: David Daney <david.daney@cavium.com>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---

diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c
index 2b97b80d6d7..c7b5afeecaf 100644
--- a/arch/powerpc/kernel/legacy_serial.c
+++ b/arch/powerpc/kernel/legacy_serial.c
@@ -6,6 +6,7 @@
 #include <linux/pci.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
+#include <linux/serial_reg.h>
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <asm/prom.h>
@@ -47,6 +48,24 @@ static struct __initdata of_device_id legacy_serial_parents[] = {
 static unsigned int legacy_serial_count;
 static int legacy_serial_console = -1;
 
+static unsigned int tsi_serial_in(struct uart_port *p, int offset)
+{
+	unsigned int tmp;
+	offset = offset << p->regshift;
+	if (offset == UART_IIR) {
+		tmp = readl(p->membase + (UART_IIR & ~3));
+		return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
+	} else
+		return readb(p->membase + offset);
+}
+
+static void tsi_serial_out(struct uart_port *p, int offset, int value)
+{
+	offset = offset << p->regshift;
+	if (!((offset == UART_IER) && (value & UART_IER_UUE)))
+		writeb(value, p->membase + offset);
+}
+
 static int __init add_legacy_port(struct device_node *np, int want_index,
 				  int iotype, phys_addr_t base,
 				  phys_addr_t taddr, unsigned long irq,
@@ -102,6 +121,7 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 		legacy_serial_ports[index].iobase = base;
 	else
 		legacy_serial_ports[index].mapbase = base;
+
 	legacy_serial_ports[index].iotype = iotype;
 	legacy_serial_ports[index].uartclk = clock;
 	legacy_serial_ports[index].irq = irq;
@@ -112,6 +132,11 @@ static int __init add_legacy_port(struct device_node *np, int want_index,
 	legacy_serial_infos[index].speed = spd ? be32_to_cpup(spd) : 0;
 	legacy_serial_infos[index].irq_check_parent = irq_check_parent;
 
+	if (iotype == UPIO_TSI) {
+		legacy_serial_ports[index].serial_in = tsi_serial_in;
+		legacy_serial_ports[index].serial_out = tsi_serial_out;
+	}
+
 	printk(KERN_DEBUG "Found legacy serial port %d for %s\n",
 	       index, np->full_name);
 	printk(KERN_DEBUG "  %s=%llx, taddr=%llx, irq=%lx, clk=%d, speed=%d\n",
diff --git a/drivers/tty/serial/8250.c b/drivers/tty/serial/8250.c
index 7f50999eebc..610b8e63710 100644
--- a/drivers/tty/serial/8250.c
+++ b/drivers/tty/serial/8250.c
@@ -443,24 +443,6 @@ static void au_serial_out(struct uart_port *p, int offset, int value)
 	__raw_writel(value, p->membase + offset);
 }
 
-static unsigned int tsi_serial_in(struct uart_port *p, int offset)
-{
-	unsigned int tmp;
-	offset = map_8250_in_reg(p, offset) << p->regshift;
-	if (offset == UART_IIR) {
-		tmp = readl(p->membase + (UART_IIR & ~3));
-		return (tmp >> 16) & 0xff; /* UART_IIR % 4 == 2 */
-	} else
-		return readb(p->membase + offset);
-}
-
-static void tsi_serial_out(struct uart_port *p, int offset, int value)
-{
-	offset = map_8250_out_reg(p, offset) << p->regshift;
-	if (!((offset == UART_IER) && (value & UART_IER_UUE)))
-		writeb(value, p->membase + offset);
-}
-
 /* Save the LCR value so it can be re-written when a Busy Detect IRQ occurs. */
 static inline void dwapb_save_out_value(struct uart_port *p, int offset,
 					int value)
@@ -535,11 +517,6 @@ static void set_io_from_upio(struct uart_port *p)
 		p->serial_out = au_serial_out;
 		break;
 
-	case UPIO_TSI:
-		p->serial_in = tsi_serial_in;
-		p->serial_out = tsi_serial_out;
-		break;
-
 	case UPIO_DWAPB:
 		p->serial_in = mem_serial_in;
 		p->serial_out = dwapb_serial_out;