From: Marko Kohtala Date: Fri, 6 Jan 2006 08:19:44 +0000 (-0800) Subject: [PATCH] parport: phase fixes X-Git-Tag: v2.6.16-rc1~936^2~81 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=742ec650e9b63ea61891455bb6f76bac37025c78;p=~emulex%2Finfiniband.git [PATCH] parport: phase fixes Did not move the parport interface properly into IEEE1284_PH_REV_IDLE phase at end of data due to comparing bytes with nibbles. Internal phase IEEE1284_PH_HBUSY_DNA became unused, so remove it. Signed-off-by: Marko Kohtala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/drivers/media/video/cpia_pp.c b/drivers/media/video/cpia_pp.c index ddf184f95d8..6861d408f1b 100644 --- a/drivers/media/video/cpia_pp.c +++ b/drivers/media/video/cpia_pp.c @@ -170,16 +170,9 @@ static size_t cpia_read_nibble (struct parport *port, /* Does the error line indicate end of data? */ if (((i /*& 1*/) == 0) && (parport_read_status(port) & PARPORT_STATUS_ERROR)) { - port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA; - DBG("%s: No more nibble data (%d bytes)\n", - port->name, i/2); - - /* Go to reverse idle phase. */ - parport_frob_control (port, - PARPORT_CONTROL_AUTOFD, - PARPORT_CONTROL_AUTOFD); - port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE; - break; + DBG("%s: No more nibble data (%d bytes)\n", + port->name, i/2); + goto end_of_data; } /* Event 7: Set nAutoFd low. */ @@ -227,18 +220,21 @@ static size_t cpia_read_nibble (struct parport *port, byte = nibble; } - i /= 2; /* i is now in bytes */ - if (i == len) { /* Read the last nibble without checking data avail. */ - port = port->physport; - if (parport_read_status (port) & PARPORT_STATUS_ERROR) - port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA; + if (parport_read_status (port) & PARPORT_STATUS_ERROR) { + end_of_data: + /* Go to reverse idle phase. */ + parport_frob_control (port, + PARPORT_CONTROL_AUTOFD, + PARPORT_CONTROL_AUTOFD); + port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE; + } else - port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL; + port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL; } - return i; + return i/2; } /* CPiA nonstandard "Nibble Stream" mode (2 nibbles per cycle, instead of 1) diff --git a/drivers/parport/ieee1284_ops.c b/drivers/parport/ieee1284_ops.c index ce1e2aad8b1..d6c77658231 100644 --- a/drivers/parport/ieee1284_ops.c +++ b/drivers/parport/ieee1284_ops.c @@ -165,17 +165,7 @@ size_t parport_ieee1284_read_nibble (struct parport *port, /* Does the error line indicate end of data? */ if (((i & 1) == 0) && (parport_read_status(port) & PARPORT_STATUS_ERROR)) { - port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA; - DPRINTK (KERN_DEBUG - "%s: No more nibble data (%d bytes)\n", - port->name, i/2); - - /* Go to reverse idle phase. */ - parport_frob_control (port, - PARPORT_CONTROL_AUTOFD, - PARPORT_CONTROL_AUTOFD); - port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE; - break; + goto end_of_data; } /* Event 7: Set nAutoFd low. */ @@ -225,18 +215,25 @@ size_t parport_ieee1284_read_nibble (struct parport *port, byte = nibble; } - i /= 2; /* i is now in bytes */ - if (i == len) { /* Read the last nibble without checking data avail. */ - port = port->physport; - if (parport_read_status (port) & PARPORT_STATUS_ERROR) - port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA; + if (parport_read_status (port) & PARPORT_STATUS_ERROR) { + end_of_data: + DPRINTK (KERN_DEBUG + "%s: No more nibble data (%d bytes)\n", + port->name, i/2); + + /* Go to reverse idle phase. */ + parport_frob_control (port, + PARPORT_CONTROL_AUTOFD, + PARPORT_CONTROL_AUTOFD); + port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE; + } else - port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL; + port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL; } - return i; + return i/2; #endif /* IEEE1284 support */ } @@ -256,17 +253,7 @@ size_t parport_ieee1284_read_byte (struct parport *port, /* Data available? */ if (parport_read_status (port) & PARPORT_STATUS_ERROR) { - port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DNA; - DPRINTK (KERN_DEBUG - "%s: No more byte data (%Zd bytes)\n", - port->name, count); - - /* Go to reverse idle phase. */ - parport_frob_control (port, - PARPORT_CONTROL_AUTOFD, - PARPORT_CONTROL_AUTOFD); - port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE; - break; + goto end_of_data; } /* Event 14: Place data bus in high impedance state. */ @@ -318,11 +305,20 @@ size_t parport_ieee1284_read_byte (struct parport *port, if (count == len) { /* Read the last byte without checking data avail. */ - port = port->physport; - if (parport_read_status (port) & PARPORT_STATUS_ERROR) - port->ieee1284.phase = IEEE1284_PH_HBUSY_DNA; + if (parport_read_status (port) & PARPORT_STATUS_ERROR) { + end_of_data: + DPRINTK (KERN_DEBUG + "%s: No more byte data (%Zd bytes)\n", + port->name, count); + + /* Go to reverse idle phase. */ + parport_frob_control (port, + PARPORT_CONTROL_AUTOFD, + PARPORT_CONTROL_AUTOFD); + port->physport->ieee1284.phase = IEEE1284_PH_REV_IDLE; + } else - port->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL; + port->physport->ieee1284.phase = IEEE1284_PH_HBUSY_DAVAIL; } return count; diff --git a/include/linux/parport.h b/include/linux/parport.h index d2a4d9e1e6d..f7ff0b0c403 100644 --- a/include/linux/parport.h +++ b/include/linux/parport.h @@ -242,7 +242,6 @@ enum ieee1284_phase { IEEE1284_PH_FWD_IDLE, IEEE1284_PH_TERMINATE, IEEE1284_PH_NEGOTIATION, - IEEE1284_PH_HBUSY_DNA, IEEE1284_PH_REV_IDLE, IEEE1284_PH_HBUSY_DAVAIL, IEEE1284_PH_REV_DATA,