From: Chris Bagwell Date: Tue, 12 Jun 2012 07:25:48 +0000 (-0700) Subject: Input: wacom - Bamboo One 1024 pressure fix X-Git-Tag: v3.6-rc1~95^2^2~28 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=6dc463511d4a690f01a9248df3b384db717e0b1c;p=~emulex%2Finfiniband.git Input: wacom - Bamboo One 1024 pressure fix Bamboo One's with ID of 0x6a and 0x6b were added with correct indication of 1024 pressure levels but the Graphire packet routine was only looking at 9 bits. Increased to 10 bits. This bug caused these devices to roll over to zero pressure at half way mark. The other devices using this routine only support 256 or 512 range and look to fix unused bits at zero. Signed-off-by: Chris Bagwell Reported-by: Tushant Mirchandani Reviewed-by: Ping Cheng Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index fd0cf4d328a..4453864956b 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -248,7 +248,7 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); if (wacom->tool[0] != BTN_TOOL_MOUSE) { - input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x01) << 8)); + input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8)); input_report_key(input, BTN_TOUCH, data[1] & 0x01); input_report_key(input, BTN_STYLUS, data[1] & 0x02); input_report_key(input, BTN_STYLUS2, data[1] & 0x04);