From: Johan Hovold Date: Sat, 15 May 2010 15:53:45 +0000 (+0200) Subject: USB: empeg: reimplement using generic framework X-Git-Tag: v2.6.35-rc1~471^2~32 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=695aaae684e249f9f0e7f1ed4caafa0687dbfa5b;p=~emulex%2Finfiniband.git USB: empeg: reimplement using generic framework Kill custom read and write implementations (static 16*4k write-urb pool shared among all ports in system). Also remove old changelog entries in header (code is now gone, and these entries can still be retrieved through git). Compile-only tested. Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c index 5f740a1eaca..504b5585ea4 100644 --- a/drivers/usb/serial/empeg.c +++ b/drivers/usb/serial/empeg.c @@ -13,44 +13,6 @@ * * See Documentation/usb/usb-serial.txt for more information on using this * driver - * - * (07/16/2001) gb - * remove unused code in empeg_close() (thanks to Oliver Neukum for - * pointing this out) and rewrote empeg_set_termios(). - * - * (05/30/2001) gkh - * switched from using spinlock to a semaphore, which fixes lots of - * problems. - * - * (04/08/2001) gb - * Identify version on module load. - * - * (01/22/2001) gb - * Added write_room() and chars_in_buffer() support. - * - * (12/21/2000) gb - * Moved termio stuff inside the port->active check. - * Moved MOD_DEC_USE_COUNT to end of empeg_close(). - * - * (12/03/2000) gb - * Added tty->ldisc.set_termios(port, tty, NULL) to empeg_open(). - * This notifies the tty driver that the termios have changed. - * - * (11/13/2000) gb - * Moved tty->low_latency = 1 from empeg_read_bulk_callback() to - * empeg_open() (It only needs to be set once - Doh!) - * - * (11/11/2000) gb - * Updated to work with id_table structure. - * - * (11/04/2000) gb - * Forked this from visor.c, and hacked it up to work with an - * Empeg ltd. empeg-car player. Constructive criticism welcomed. - * I would like to say, 'Thank You' to Greg Kroah-Hartman for the - * use of his code, and for his guidance, advice and patience. :) - * A 'Thank You' is in order for John Ripley of Empeg ltd for his - * advice, and patience too. - * */ #include @@ -71,7 +33,7 @@ static int debug; /* * Version Information */ -#define DRIVER_VERSION "v1.2" +#define DRIVER_VERSION "v1.3" #define DRIVER_AUTHOR "Greg Kroah-Hartman , Gary Brubaker " #define DRIVER_DESC "USB Empeg Mark I/II Driver" @@ -79,19 +41,8 @@ static int debug; #define EMPEG_PRODUCT_ID 0x0001 /* function prototypes for an empeg-car player */ -static int empeg_open(struct tty_struct *tty, struct usb_serial_port *port); -static void empeg_close(struct usb_serial_port *port); -static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *buf, - int count); -static int empeg_write_room(struct tty_struct *tty); -static int empeg_chars_in_buffer(struct tty_struct *tty); -static void empeg_throttle(struct tty_struct *tty); -static void empeg_unthrottle(struct tty_struct *tty); static int empeg_startup(struct usb_serial *serial); static void empeg_init_termios(struct tty_struct *tty); -static void empeg_write_bulk_callback(struct urb *urb); -static void empeg_read_bulk_callback(struct urb *urb); static const struct usb_device_id id_table[] = { { USB_DEVICE(EMPEG_VENDOR_ID, EMPEG_PRODUCT_ID) }, @@ -105,7 +56,7 @@ static struct usb_driver empeg_driver = { .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, .id_table = id_table, - .no_dynamic_id = 1, + .no_dynamic_id = 1, }; static struct usb_serial_driver empeg_device = { @@ -114,291 +65,16 @@ static struct usb_serial_driver empeg_device = { .name = "empeg", }, .id_table = id_table, - .usb_driver = &empeg_driver, + .usb_driver = &empeg_driver, .num_ports = 1, - .open = empeg_open, - .close = empeg_close, - .throttle = empeg_throttle, - .unthrottle = empeg_unthrottle, + .bulk_out_size = 256, + .throttle = usb_serial_generic_throttle, + .unthrottle = usb_serial_generic_unthrottle, .attach = empeg_startup, .init_termios = empeg_init_termios, - .write = empeg_write, - .write_room = empeg_write_room, - .chars_in_buffer = empeg_chars_in_buffer, - .write_bulk_callback = empeg_write_bulk_callback, - .read_bulk_callback = empeg_read_bulk_callback, }; -#define NUM_URBS 16 -#define URB_TRANSFER_BUFFER_SIZE 4096 - -static struct urb *write_urb_pool[NUM_URBS]; -static spinlock_t write_urb_pool_lock; -static int bytes_in; -static int bytes_out; - -/****************************************************************************** - * Empeg specific driver functions - ******************************************************************************/ -static int empeg_open(struct tty_struct *tty,struct usb_serial_port *port) -{ - struct usb_serial *serial = port->serial; - int result = 0; - - dbg("%s - port %d", __func__, port->number); - - bytes_in = 0; - bytes_out = 0; - - /* Start reading from the device */ - usb_fill_bulk_urb( - port->read_urb, - serial->dev, - usb_rcvbulkpipe(serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - empeg_read_bulk_callback, - port); - - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __func__, result); - - return result; -} - - -static void empeg_close(struct usb_serial_port *port) -{ - dbg("%s - port %d", __func__, port->number); - - /* shutdown our bulk read */ - usb_kill_urb(port->read_urb); - /* Uncomment the following line if you want to see some statistics in your syslog */ - /* dev_info (&port->dev, "Bytes In = %d Bytes Out = %d\n", bytes_in, bytes_out); */ -} - - -static int empeg_write(struct tty_struct *tty, struct usb_serial_port *port, - const unsigned char *buf, int count) -{ - struct usb_serial *serial = port->serial; - struct urb *urb; - const unsigned char *current_position = buf; - unsigned long flags; - int status; - int i; - int bytes_sent = 0; - int transfer_size; - - dbg("%s - port %d", __func__, port->number); - - while (count > 0) { - /* try to find a free urb in our list of them */ - urb = NULL; - - spin_lock_irqsave(&write_urb_pool_lock, flags); - - for (i = 0; i < NUM_URBS; ++i) { - if (write_urb_pool[i]->status != -EINPROGRESS) { - urb = write_urb_pool[i]; - break; - } - } - - spin_unlock_irqrestore(&write_urb_pool_lock, flags); - - if (urb == NULL) { - dbg("%s - no more free urbs", __func__); - goto exit; - } - - if (urb->transfer_buffer == NULL) { - urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC); - if (urb->transfer_buffer == NULL) { - dev_err(&port->dev, - "%s no more kernel memory...\n", - __func__); - goto exit; - } - } - - transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE); - - memcpy(urb->transfer_buffer, current_position, transfer_size); - - usb_serial_debug_data(debug, &port->dev, __func__, transfer_size, urb->transfer_buffer); - - /* build up our urb */ - usb_fill_bulk_urb( - urb, - serial->dev, - usb_sndbulkpipe(serial->dev, - port->bulk_out_endpointAddress), - urb->transfer_buffer, - transfer_size, - empeg_write_bulk_callback, - port); - - /* send it down the pipe */ - status = usb_submit_urb(urb, GFP_ATOMIC); - if (status) { - dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed with status = %d\n", __func__, status); - bytes_sent = status; - break; - } - - current_position += transfer_size; - bytes_sent += transfer_size; - count -= transfer_size; - bytes_out += transfer_size; - - } -exit: - return bytes_sent; -} - - -static int empeg_write_room(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - unsigned long flags; - int i; - int room = 0; - - dbg("%s - port %d", __func__, port->number); - - spin_lock_irqsave(&write_urb_pool_lock, flags); - /* tally up the number of bytes available */ - for (i = 0; i < NUM_URBS; ++i) { - if (write_urb_pool[i]->status != -EINPROGRESS) - room += URB_TRANSFER_BUFFER_SIZE; - } - spin_unlock_irqrestore(&write_urb_pool_lock, flags); - dbg("%s - returns %d", __func__, room); - return room; - -} - - -static int empeg_chars_in_buffer(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - unsigned long flags; - int i; - int chars = 0; - - dbg("%s - port %d", __func__, port->number); - - spin_lock_irqsave(&write_urb_pool_lock, flags); - - /* tally up the number of bytes waiting */ - for (i = 0; i < NUM_URBS; ++i) { - if (write_urb_pool[i]->status == -EINPROGRESS) - chars += URB_TRANSFER_BUFFER_SIZE; - } - - spin_unlock_irqrestore(&write_urb_pool_lock, flags); - dbg("%s - returns %d", __func__, chars); - return chars; -} - - -static void empeg_write_bulk_callback(struct urb *urb) -{ - struct usb_serial_port *port = urb->context; - int status = urb->status; - - dbg("%s - port %d", __func__, port->number); - - if (status) { - dbg("%s - nonzero write bulk status received: %d", - __func__, status); - return; - } - - usb_serial_port_softint(port); -} - - -static void empeg_read_bulk_callback(struct urb *urb) -{ - struct usb_serial_port *port = urb->context; - struct tty_struct *tty; - unsigned char *data = urb->transfer_buffer; - int result; - int status = urb->status; - - dbg("%s - port %d", __func__, port->number); - - if (status) { - dbg("%s - nonzero read bulk status received: %d", - __func__, status); - return; - } - - usb_serial_debug_data(debug, &port->dev, __func__, - urb->actual_length, data); - tty = tty_port_tty_get(&port->port); - - if (urb->actual_length) { - tty_insert_flip_string(tty, data, urb->actual_length); - tty_flip_buffer_push(tty); - bytes_in += urb->actual_length; - } - tty_kref_put(tty); - - /* Continue trying to always read */ - usb_fill_bulk_urb( - port->read_urb, - port->serial->dev, - usb_rcvbulkpipe(port->serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - empeg_read_bulk_callback, - port); - - result = usb_submit_urb(port->read_urb, GFP_ATOMIC); - - if (result) - dev_err(&urb->dev->dev, - "%s - failed resubmitting read urb, error %d\n", - __func__, result); - - return; - -} - - -static void empeg_throttle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - dbg("%s - port %d", __func__, port->number); - usb_kill_urb(port->read_urb); -} - - -static void empeg_unthrottle(struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - int result; - dbg("%s - port %d", __func__, port->number); - - port->read_urb->dev = port->serial->dev; - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) - dev_err(&port->dev, - "%s - failed submitting read urb, error %d\n", - __func__, result); -} - - -static int empeg_startup(struct usb_serial *serial) +static int empeg_startup(struct usb_serial *serial) { int r; @@ -414,10 +90,8 @@ static int empeg_startup(struct usb_serial *serial) /* continue on with initialization */ return r; - } - static void empeg_init_termios(struct tty_struct *tty) { struct ktermios *termios = tty->termios; @@ -462,77 +136,28 @@ static void empeg_init_termios(struct tty_struct *tty) tty_encode_baud_rate(tty, 115200, 115200); } - static int __init empeg_init(void) { - struct urb *urb; - int i, retval; - - /* create our write urb pool and transfer buffers */ - spin_lock_init(&write_urb_pool_lock); - for (i = 0; i < NUM_URBS; ++i) { - urb = usb_alloc_urb(0, GFP_KERNEL); - write_urb_pool[i] = urb; - if (urb == NULL) { - printk(KERN_ERR "empeg: No more urbs???\n"); - continue; - } - - urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE, - GFP_KERNEL); - if (!urb->transfer_buffer) { - printk(KERN_ERR "empeg: %s - out of memory for urb " - "buffers.", __func__); - continue; - } - } + int retval; retval = usb_serial_register(&empeg_device); if (retval) - goto failed_usb_serial_register; + return retval; retval = usb_register(&empeg_driver); - if (retval) - goto failed_usb_register; - + if (retval) { + usb_serial_deregister(&empeg_device); + return retval; + } printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" DRIVER_DESC "\n"); return 0; -failed_usb_register: - usb_serial_deregister(&empeg_device); -failed_usb_serial_register: - for (i = 0; i < NUM_URBS; ++i) { - if (write_urb_pool[i]) { - kfree(write_urb_pool[i]->transfer_buffer); - usb_free_urb(write_urb_pool[i]); - } - } - return retval; } - static void __exit empeg_exit(void) { - int i; - unsigned long flags; - usb_deregister(&empeg_driver); usb_serial_deregister(&empeg_device); - - spin_lock_irqsave(&write_urb_pool_lock, flags); - - for (i = 0; i < NUM_URBS; ++i) { - if (write_urb_pool[i]) { - /* FIXME - uncomment the following usb_kill_urb call - * when the host controllers get fixed to set urb->dev - * = NULL after the urb is finished. Otherwise this - * call oopses. */ - /* usb_kill_urb(write_urb_pool[i]); */ - kfree(write_urb_pool[i]->transfer_buffer); - usb_free_urb(write_urb_pool[i]); - } - } - spin_unlock_irqrestore(&write_urb_pool_lock, flags); }