From: Johannes Berg Date: Mon, 23 Aug 2010 14:56:55 +0000 (-0700) Subject: iwlagn: implement advance BT config command X-Git-Tag: v2.6.37-rc1~147^2~584^2^2~74 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=670245ed4515cbc5e39e39d44965cb7add2c8aa9;p=~shefty%2Frdma-dev.git iwlagn: implement advance BT config command 6000g2b hardware implements advance bluetooth coexist command, implement base on the new API command strucutre. Also increment the API 5 to support the advance BT/WIfi coex. Signed-off-by: Johannes Berg Signed-off-by: Wey-Yi Guy Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c index 9e390f69864..fc2eeb00c78 100644 --- a/drivers/net/wireless/iwlwifi/iwl-6000.c +++ b/drivers/net/wireless/iwlwifi/iwl-6000.c @@ -52,7 +52,7 @@ /* Highest firmware API version supported */ #define IWL6000_UCODE_API_MAX 4 #define IWL6050_UCODE_API_MAX 4 -#define IWL6000G2_UCODE_API_MAX 4 +#define IWL6000G2_UCODE_API_MAX 5 /* Lowest firmware API version supported */ #define IWL6000_UCODE_API_MIN 4 @@ -122,6 +122,120 @@ static void iwl6000_nic_config(struct iwl_priv *priv) priv->cfg->ops->lib->temp_ops.set_calib_version(priv); } +/* + * Macros to access the lookup table. + * + * The lookup table has 7 inputs: bt3_prio, bt3_txrx, bt_rf_act, wifi_req, + * wifi_prio, wifi_txrx and wifi_sh_ant_req. + * + * It has three outputs: WLAN_ACTIVE, WLAN_KILL and ANT_SWITCH + * + * The format is that "registers" 8 through 11 contain the WLAN_ACTIVE bits + * one after another in 32-bit registers, and "registers" 0 through 7 contain + * the WLAN_KILL and ANT_SWITCH bits interleaved (in that order). + * + * These macros encode that format. + */ +#define LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, wifi_req, wifi_prio, \ + wifi_txrx, wifi_sh_ant_req) \ + (bt3_prio | (bt3_txrx << 1) | (bt_rf_act << 2) | (wifi_req << 3) | \ + (wifi_prio << 4) | (wifi_txrx << 5) | (wifi_sh_ant_req << 6)) + +#define LUT_PTA_WLAN_ACTIVE_OP(lut, op, val) \ + lut[8 + ((val) >> 5)] op (cpu_to_le32(BIT((val) & 0x1f))) +#define LUT_TEST_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \ + wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req) \ + (!!(LUT_PTA_WLAN_ACTIVE_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx,\ + bt_rf_act, wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)))) +#define LUT_SET_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \ + wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req) \ + LUT_PTA_WLAN_ACTIVE_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, \ + bt_rf_act, wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) +#define LUT_CLEAR_PTA_WLAN_ACTIVE(lut, bt3_prio, bt3_txrx, bt_rf_act, \ + wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req) \ + LUT_PTA_WLAN_ACTIVE_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, \ + bt_rf_act, wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) + +#define LUT_WLAN_KILL_OP(lut, op, val) \ + lut[(val) >> 4] op (cpu_to_le32(BIT(((val) << 1) & 0x1e))) +#define LUT_TEST_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ + wifi_prio, wifi_txrx, wifi_sh_ant_req) \ + (!!(LUT_WLAN_KILL_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ + wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)))) +#define LUT_SET_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ + wifi_prio, wifi_txrx, wifi_sh_ant_req) \ + LUT_WLAN_KILL_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ + wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) +#define LUT_CLEAR_WLAN_KILL(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ + wifi_prio, wifi_txrx, wifi_sh_ant_req) \ + LUT_WLAN_KILL_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ + wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) + +#define LUT_ANT_SWITCH_OP(lut, op, val) \ + lut[(val) >> 4] op (cpu_to_le32(BIT((((val) << 1) & 0x1e) + 1))) +#define LUT_TEST_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ + wifi_prio, wifi_txrx, wifi_sh_ant_req) \ + (!!(LUT_ANT_SWITCH_OP(lut, &, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ + wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)))) +#define LUT_SET_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ + wifi_prio, wifi_txrx, wifi_sh_ant_req) \ + LUT_ANT_SWITCH_OP(lut, |=, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ + wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) +#define LUT_CLEAR_ANT_SWITCH(lut, bt3_prio, bt3_txrx, bt_rf_act, wifi_req, \ + wifi_prio, wifi_txrx, wifi_sh_ant_req) \ + LUT_ANT_SWITCH_OP(lut, &= ~, LUT_VALUE(bt3_prio, bt3_txrx, bt_rf_act, \ + wifi_req, wifi_prio, wifi_txrx, wifi_sh_ant_req)) + +static const __le32 iwl6000g2b_def_3w_lookup[12] = { + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xaeaaaaaa), + cpu_to_le32(0xaaaaaaaa), + cpu_to_le32(0xcc00ff28), + cpu_to_le32(0x0000aaaa), + cpu_to_le32(0xcc00aaaa), + cpu_to_le32(0x0000aaaa), + cpu_to_le32(0xc0004000), + cpu_to_le32(0x00004000), + cpu_to_le32(0xf0005000), + cpu_to_le32(0xf0004000), +}; + +static void iwl6000g2b_send_bt_config(struct iwl_priv *priv) +{ + struct iwl6000g2b_bt_cmd bt_cmd = { + .prio_boost = IWL6000G2B_BT_PRIO_BOOST_DEFAULT, + .max_kill = IWL6000G2B_BT_MAX_KILL_DEFAULT, + .bt3_timer_t7_value = IWL6000G2B_BT3_T7_DEFAULT, + .kill_ack_mask = IWL6000G2B_BT_KILL_ACK_MASK_DEFAULT, + .kill_cts_mask = IWL6000G2B_BT_KILL_CTS_MASK_DEFAULT, + .bt3_prio_sample_time = IWL6000G2B_BT3_PRIO_SAMPLE_DEFAULT, + .bt3_timer_t2_value = IWL6000G2B_BT3_T2_DEFAULT, + .valid = IWL6000G2B_BT_VALID_ENABLE_FLAGS, + }; + + BUILD_BUG_ON(sizeof(iwl6000g2b_def_3w_lookup) != + sizeof(bt_cmd.bt3_lookup_table)); + + if (!bt_coex_active) { + bt_cmd.flags = 0; + } else { + bt_cmd.flags = IWL6000G2B_BT_FLAG_CHANNEL_INHIBITION | + IWL6000G2B_BT_FLAG_COEX_MODE_3W << + IWL6000G2B_BT_FLAG_COEX_MODE_SHIFT; + bt_cmd.valid |= IWL6000G2B_BT_ALL_VALID_MSK; + } + + memcpy(bt_cmd.bt3_lookup_table, iwl6000g2b_def_3w_lookup, + sizeof(iwl6000g2b_def_3w_lookup)); + + IWL_DEBUG_INFO(priv, "BT coex %s\n", + bt_cmd.flags ? "active" : "disabled"); + + if (iwl_send_cmd_pdu(priv, REPLY_BT_CONFIG, sizeof(bt_cmd), &bt_cmd)) + IWL_ERR(priv, "failed to send BT Coex Config\n"); +} + static struct iwl_sensitivity_ranges iwl6000_sensitivity = { .min_nrg_cck = 97, .max_nrg_cck = 0, /* not used, set to 0 */ @@ -344,16 +458,12 @@ static const struct iwl_ops iwl6000_ops = { .led = &iwlagn_led_ops, }; -static void do_not_send_bt_config(struct iwl_priv *priv) -{ -} - static struct iwl_hcmd_ops iwl6000g2b_hcmd = { .rxon_assoc = iwlagn_send_rxon_assoc, .commit_rxon = iwl_commit_rxon, .set_rxon_chain = iwl_set_rxon_chain, .set_tx_ant = iwlagn_send_tx_ant_config, - .send_bt_config = do_not_send_bt_config, + .send_bt_config = iwl6000g2b_send_bt_config, }; static const struct iwl_ops iwl6000g2b_ops = { @@ -507,6 +617,9 @@ struct iwl_cfg iwl6000g2b_2agn_cfg = { .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, + /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ + .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .advanced_bt_coexist = true, }; struct iwl_cfg iwl6000g2b_2abg_cfg = { @@ -543,6 +656,9 @@ struct iwl_cfg iwl6000g2b_2abg_cfg = { .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, + /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ + .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .advanced_bt_coexist = true, }; struct iwl_cfg iwl6000g2b_2bgn_cfg = { @@ -581,6 +697,9 @@ struct iwl_cfg iwl6000g2b_2bgn_cfg = { .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, + /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ + .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .advanced_bt_coexist = true, }; struct iwl_cfg iwl6000g2b_2bg_cfg = { @@ -617,6 +736,9 @@ struct iwl_cfg iwl6000g2b_2bg_cfg = { .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, + /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ + .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .advanced_bt_coexist = true, }; struct iwl_cfg iwl6000g2b_bgn_cfg = { @@ -655,6 +777,9 @@ struct iwl_cfg iwl6000g2b_bgn_cfg = { .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, + /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ + .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .advanced_bt_coexist = true, }; struct iwl_cfg iwl6000g2b_bg_cfg = { @@ -691,6 +816,9 @@ struct iwl_cfg iwl6000g2b_bg_cfg = { .chain_noise_calib_by_driver = true, .need_dc_calib = true, .bt_statistics = true, + /* Due to bluetooth, we transmit 2.4 GHz probes only on antenna A */ + .scan_tx_antennas[IEEE80211_BAND_2GHZ] = ANT_A, + .advanced_bt_coexist = true, }; /* diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h index 78086ad6b72..69fc7745eda 100644 --- a/drivers/net/wireless/iwlwifi/iwl-commands.h +++ b/drivers/net/wireless/iwlwifi/iwl-commands.h @@ -2394,6 +2394,68 @@ struct iwl_bt_cmd { __le32 kill_cts_mask; } __packed; +#define IWL6000G2B_BT_FLAG_CHANNEL_INHIBITION BIT(0) + +#define IWL6000G2B_BT_FLAG_COEX_MODE_MASK (BIT(3)|BIT(4)|BIT(5)) +#define IWL6000G2B_BT_FLAG_COEX_MODE_SHIFT 3 +#define IWL6000G2B_BT_FLAG_COEX_MODE_DISABLED 0 +#define IWL6000G2B_BT_FLAG_COEX_MODE_LEGACY_2W 1 +#define IWL6000G2B_BT_FLAG_COEX_MODE_3W 2 +#define IWL6000G2B_BT_FLAG_COEX_MODE_4W 3 + +#define IWL6000G2B_BT_FLAG_UCODE_DEFAULT BIT(6) +#define IWL6000G2B_BT_FLAG_NOCOEX_NOTIF BIT(7) + +#define IWL6000G2B_BT_PRIO_BOOST_MAX 0xFF +#define IWL6000G2B_BT_PRIO_BOOST_MIN 0x00 +#define IWL6000G2B_BT_PRIO_BOOST_DEFAULT 0x00 + +#define IWL6000G2B_BT_MAX_KILL_DEFAULT 5 + +#define IWL6000G2B_BT3_T7_DEFAULT 1 + +#define IWL6000G2B_BT_KILL_ACK_MASK_DEFAULT cpu_to_le32(0xffffffff) +#define IWL6000G2B_BT_KILL_CTS_MASK_DEFAULT cpu_to_le32(0xffffffff) + +#define IWL6000G2B_BT3_PRIO_SAMPLE_DEFAULT 2 + +#define IWL6000G2B_BT3_T2_DEFAULT 0xc + +#define IWL6000G2B_BT_VALID_ENABLE_FLAGS cpu_to_le16(BIT(0)) +#define IWL6000G2B_BT_VALID_BOOST cpu_to_le16(BIT(1)) +#define IWL6000G2B_BT_VALID_MAX_KILL cpu_to_le16(BIT(2)) +#define IWL6000G2B_BT_VALID_3W_TIMERS cpu_to_le16(BIT(3)) +#define IWL6000G2B_BT_VALID_KILL_ACK_MASK cpu_to_le16(BIT(4)) +#define IWL6000G2B_BT_VALID_KILL_CTS_MASK cpu_to_le16(BIT(5)) +#define IWL6000G2B_BT_VALID_BT4_TIMES cpu_to_le16(BIT(6)) +#define IWL6000G2B_BT_VALID_3W_LUT cpu_to_le16(BIT(7)) + +#define IWL6000G2B_BT_ALL_VALID_MSK (IWL6000G2B_BT_VALID_ENABLE_FLAGS | \ + IWL6000G2B_BT_VALID_BOOST | \ + IWL6000G2B_BT_VALID_MAX_KILL | \ + IWL6000G2B_BT_VALID_3W_TIMERS | \ + IWL6000G2B_BT_VALID_KILL_ACK_MASK | \ + IWL6000G2B_BT_VALID_KILL_CTS_MASK | \ + IWL6000G2B_BT_VALID_BT4_TIMES | \ + IWL6000G2B_BT_VALID_3W_LUT) + +struct iwl6000g2b_bt_cmd { + u8 flags; + u8 ledtime; /* unused */ + u8 max_kill; + u8 bt3_timer_t7_value; + __le32 kill_ack_mask; + __le32 kill_cts_mask; + u8 bt3_prio_sample_time; + u8 bt3_timer_t2_value; + __le16 bt4_reaction_time; /* unused */ + __le32 bt3_lookup_table[12]; + __le16 bt4_decision_time; /* unused */ + __le16 valid; + u8 prio_boost; + u8 reserved[3]; +}; + /****************************************************************************** * (6) * Spectrum Management (802.11h) Commands, Responses, Notifications: diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 3d9443b9bec..4beddade742 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -64,7 +64,8 @@ MODULE_LICENSE("GPL"); * * default: bt_coex_active = true (BT_COEX_ENABLE) */ -static bool bt_coex_active = true; +bool bt_coex_active = true; +EXPORT_SYMBOL_GPL(bt_coex_active); module_param(bt_coex_active, bool, S_IRUGO); MODULE_PARM_DESC(bt_coex_active, "enable wifi/bluetooth co-exist"); diff --git a/drivers/net/wireless/iwlwifi/iwl-core.h b/drivers/net/wireless/iwlwifi/iwl-core.h index 7b1e832bae5..d7733798715 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.h +++ b/drivers/net/wireless/iwlwifi/iwl-core.h @@ -278,6 +278,7 @@ struct iwl_mod_params { * @chain_noise_calib_by_driver: driver has the capability to perform * chain noise calibration operation * @scan_antennas: available antenna for scan operation + * @advanced_bt_coexist: support advanced bt coexist * @need_dc_calib: need to perform init dc calibration * @bt_statistics: use BT version of statistics notification * @agg_time_limit: maximum number of uSec in aggregation @@ -351,6 +352,7 @@ struct iwl_cfg { const bool chain_noise_calib_by_driver; u8 scan_rx_antennas[IEEE80211_NUM_BANDS]; u8 scan_tx_antennas[IEEE80211_NUM_BANDS]; + bool advanced_bt_coexist; const bool need_dc_calib; const bool bt_statistics; u16 agg_time_limit; @@ -732,4 +734,7 @@ static inline const struct ieee80211_supported_band *iwl_get_hw_mode( { return priv->hw->wiphy->bands[band]; } + +extern bool bt_coex_active; + #endif /* __iwl_core_h__ */