From: Tony Lindgren <tony@atomide.com>
Date: Wed, 3 Oct 2012 22:31:58 +0000 (-0700)
Subject: tty/serial/8250: Make omap hardware workarounds local to 8250.h
X-Git-Tag: v3.8-rc1~145^2~9^2
X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=54ec52b6dd3b0ba4bc4eb97e7e1b2534705b326c;p=~emulex%2Finfiniband.git

tty/serial/8250: Make omap hardware workarounds local to 8250.h

This allows us to get rid of the ifdefs in 8250.c.

Cc: Alan Cox <alan@linux.intel.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/arch/arm/plat-omap/include/plat/serial.h b/arch/arm/plat-omap/include/plat/serial.h
index 65fce44dce3..b780470d03e 100644
--- a/arch/arm/plat-omap/include/plat/serial.h
+++ b/arch/arm/plat-omap/include/plat/serial.h
@@ -109,15 +109,6 @@
 #define OMAP5UART4		OMAP4UART4
 #define ZOOM_UART		95		/* Only on zoom2/3 */
 
-/* This is only used by 8250.c for omap1510 */
-#define is_omap_port(pt)	({int __ret = 0;			\
-			if ((pt)->port.mapbase == OMAP1_UART1_BASE ||	\
-			    (pt)->port.mapbase == OMAP1_UART2_BASE ||	\
-			    (pt)->port.mapbase == OMAP1_UART3_BASE)	\
-				__ret = 1;				\
-			__ret;						\
-			})
-
 #ifndef __ASSEMBLER__
 
 struct omap_board_data;
diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c
index 3ba4234592b..5ccbd90540c 100644
--- a/drivers/tty/serial/8250/8250.c
+++ b/drivers/tty/serial/8250/8250.c
@@ -2349,16 +2349,14 @@ serial8250_do_set_termios(struct uart_port *port, struct ktermios *termios,
 			serial_port_out(port, UART_EFR, efr);
 	}
 
-#ifdef CONFIG_ARCH_OMAP1
 	/* Workaround to enable 115200 baud on OMAP1510 internal ports */
-	if (cpu_is_omap1510() && is_omap_port(up)) {
+	if (is_omap1510_8250(up)) {
 		if (baud == 115200) {
 			quot = 1;
 			serial_port_out(port, UART_OMAP_OSC_12M_SEL, 1);
 		} else
 			serial_port_out(port, UART_OMAP_OSC_12M_SEL, 0);
 	}
-#endif
 
 	/*
 	 * For NatSemi, switch to bank 2 not bank 1, to avoid resetting EXCR2,
@@ -2439,10 +2437,9 @@ static unsigned int serial8250_port_size(struct uart_8250_port *pt)
 {
 	if (pt->port.iotype == UPIO_AU)
 		return 0x1000;
-#ifdef CONFIG_ARCH_OMAP1
-	if (is_omap_port(pt))
+	if (is_omap1_8250(pt))
 		return 0x16 << pt->port.regshift;
-#endif
+
 	return 8 << pt->port.regshift;
 }
 
diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
index 5a76f9c8d36..3b4ea84898c 100644
--- a/drivers/tty/serial/8250/8250.h
+++ b/drivers/tty/serial/8250/8250.h
@@ -106,3 +106,39 @@ static inline int serial8250_pnp_init(void) { return 0; }
 static inline void serial8250_pnp_exit(void) { }
 #endif
 
+#ifdef CONFIG_ARCH_OMAP1
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+	int res;
+
+	switch (pt->port.mapbase) {
+	case OMAP1_UART1_BASE:
+	case OMAP1_UART2_BASE:
+	case OMAP1_UART3_BASE:
+		res = 1;
+		break;
+	default:
+		res = 0;
+		break;
+	}
+
+	return res;
+}
+
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+	if (!cpu_is_omap1510())
+		return 0;
+
+	return is_omap1_8250(pt);
+}
+#else
+static inline int is_omap1_8250(struct uart_8250_port *pt)
+{
+	return 0;
+}
+static inline int is_omap1510_8250(struct uart_8250_port *pt)
+{
+	return 0;
+}
+#endif