From: Rajendra Nayak Date: Thu, 3 Feb 2011 12:45:21 +0000 (+0000) Subject: omap3sdp: Fix regulator mapping for ads7846 TS controller X-Git-Tag: v2.6.39-rc1~432^2~23^4~8 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=4b087ff8572c7e7095787ca14aa72e39c80859bd;p=~emulex%2Finfiniband.git omap3sdp: Fix regulator mapping for ads7846 TS controller On the OMAP3430SDP board, the ads7846 touchscreen controller is powered by VAUX3 regulator (supplying 2.8v). Fix this mapping in the board file, and hence prevent the ads7846 driver init to fail with the below error.. ads7846 spi1.0: unable to get regulator: -19 Signed-off-by: Rajendra Nayak Reviewed-by: Felipe Balbi Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 31085883199..7f8c7a73c53 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -426,6 +426,11 @@ static struct twl4030_madc_platform_data sdp3430_madc_data = { .irq_line = 1, }; +/* ads7846 on SPI */ +static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; + /* * Apply all the fixed voltages since most versions of U-Boot * don't bother with that initialization. @@ -468,6 +473,8 @@ static struct regulator_init_data sdp3430_vaux3 = { .valid_ops_mask = REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS, }, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies), + .consumer_supplies = sdp3430_vaux3_supplies, }; /* VAUX4 for OMAP VDD_CSI2 (camera) */