From: Xenia Ragiadakou Date: Sat, 15 Jun 2013 04:29:08 +0000 (+0300) Subject: staging: rtl8192u: fix function arguments position in r819xU_phy.c X-Git-Tag: v3.11-rc1~158^2~88 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=442543d78c1059f3db655e1161611a50f189b06a;p=~emulex%2Finfiniband.git staging: rtl8192u: fix function arguments position in r819xU_phy.c This patch fixes the alignment of function arguments to make it uniform across the driver trying to keep the line size below 80 characters. Signed-off-by: Xenia Ragiadakou Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c index d91d1dee24f..66ab3d591f2 100644 --- a/drivers/staging/rtl8192u/r819xU_phy.c +++ b/drivers/staging/rtl8192u/r819xU_phy.c @@ -80,7 +80,8 @@ u8 rtl8192_phy_CheckIsLegalRFPath(struct net_device *dev, u32 eRFPath) * return: none * notice: * ****************************************************************************/ -void rtl8192_setBBreg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask, u32 dwData) +void rtl8192_setBBreg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask, + u32 dwData) { u32 OriginalValue, BitShift, NewValue; @@ -114,9 +115,12 @@ u32 rtl8192_QueryBBReg(struct net_device *dev, u32 dwRegAddr, u32 dwBitMask) return Ret; } -static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 Offset); +static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, + u32 Offset); -static void phy_FwRFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data); +static void phy_FwRFSerialWrite(struct net_device *dev, + RF90_RADIO_PATH_E eRFPath, u32 Offset, + u32 Data); /****************************************************************************** *function: This function read register from RF chip @@ -127,7 +131,8 @@ static void phy_FwRFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E * return: u32 readback value * notice: There are three types of serial operations:(1) Software serial write.(2)Hardware LSSI-Low Speed Serial Interface.(3)Hardware HSSI-High speed serial write. Driver here need to implement (1) and (2)---need more spec for this information. * ****************************************************************************/ -u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 Offset) +u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, + u32 Offset) { struct r8192_priv *priv = ieee80211_priv(dev); u32 ret = 0; @@ -208,7 +213,8 @@ u32 rtl8192_phy_RFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, * Reg_Mode2 1 1 Reg 31 ~ 45(0x1 ~ 0xf) *------------------------------------------------------------------ * ****************************************************************************/ -void rtl8192_phy_RFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data) +void rtl8192_phy_RFSerialWrite(struct net_device *dev, + RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data) { struct r8192_priv *priv = ieee80211_priv(dev); u32 DataAndAddr = 0, NewOffset = 0; @@ -269,7 +275,8 @@ void rtl8192_phy_RFSerialWrite(struct net_device *dev, RF90_RADIO_PATH_E eRFPath * return: none * notice: * ****************************************************************************/ -void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask, u32 Data) +void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, + u32 RegAddr, u32 BitMask, u32 Data) { struct r8192_priv *priv = ieee80211_priv(dev); u32 Original_Value, BitShift, New_Value; @@ -313,7 +320,8 @@ void rtl8192_phy_SetRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 * return: u32 Data //the readback register value * notice: * ****************************************************************************/ -u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u32 RegAddr, u32 BitMask) +u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, + u32 RegAddr, u32 BitMask) { u32 Original_Value, Readback_Value, BitShift; struct r8192_priv *priv = ieee80211_priv(dev); @@ -341,11 +349,8 @@ u32 rtl8192_phy_QueryRFReg(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, u3 * return: none * notice: * ***************************************************************************/ -static u32 -phy_FwRFSerialRead( - struct net_device *dev, - RF90_RADIO_PATH_E eRFPath, - u32 Offset ) +static u32 phy_FwRFSerialRead(struct net_device *dev, RF90_RADIO_PATH_E eRFPath, + u32 Offset) { u32 retValue = 0; u32 Data = 0; @@ -399,12 +404,8 @@ phy_FwRFSerialRead( * return: none * notice: * ***************************************************************************/ -static void -phy_FwRFSerialWrite( - struct net_device *dev, - RF90_RADIO_PATH_E eRFPath, - u32 Offset, - u32 Data ) +static void phy_FwRFSerialWrite(struct net_device *dev, + RF90_RADIO_PATH_E eRFPath, u32 Offset, u32 Data) { u8 time = 0; u32 tmp; @@ -642,7 +643,8 @@ void rtl8192_InitBBRFRegDef(struct net_device *dev) * return: return whether BB and RF is ok(0:OK; 1:Fail) * notice: This function may be removed in the ASIC * ***************************************************************************/ -u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, RF90_RADIO_PATH_E eRFPath) +u8 rtl8192_phy_checkBBAndRF(struct net_device *dev, HW90_BLOCK_E CheckBlock, + RF90_RADIO_PATH_E eRFPath) { u8 ret = 0; u32 i, CheckTimes = 4, dwRegRead = 0; @@ -883,7 +885,8 @@ void rtl8192_phy_updateInitGain(struct net_device *dev) * return: return code show if RF configuration is successful(0:pass, 1:fail) * Note: Delay may be required for RF configuration * ***************************************************************************/ -u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, RF90_RADIO_PATH_E eRFPath) +u8 rtl8192_phy_ConfigRFWithHeaderFile(struct net_device *dev, + RF90_RADIO_PATH_E eRFPath) { int i; @@ -989,7 +992,8 @@ void rtl8192_SetTxPowerLevel(struct net_device *dev, u8 channel) * return: none * Note: * ***************************************************************************/ -bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerState) +bool rtl8192_SetRFPowerState(struct net_device *dev, + RT_RF_POWER_STATE eRFPowerState) { bool bResult = true; struct r8192_priv *priv = ieee80211_priv(dev); @@ -1112,15 +1116,9 @@ bool rtl8192_SetRFPowerState(struct net_device *dev, RT_RF_POWER_STATE eRFPowerS * return: true if finished, false otherwise * Note: * ************************************************************************************/ -u8 rtl8192_phy_SetSwChnlCmdArray( - SwChnlCmd *CmdTable, - u32 CmdTableIdx, - u32 CmdTableSz, - SwChnlCmdID CmdID, - u32 Para1, - u32 Para2, - u32 msDelay - ) +u8 rtl8192_phy_SetSwChnlCmdArray(SwChnlCmd *CmdTable, u32 CmdTableIdx, + u32 CmdTableSz, SwChnlCmdID CmdID, u32 Para1, + u32 Para2, u32 msDelay) { SwChnlCmd *pCmd; @@ -1153,7 +1151,8 @@ u8 rtl8192_phy_SetSwChnlCmdArray( * return: true if finished, false otherwise * Note: Wait for simpler function to replace it //wb * ***************************************************************************/ -u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, u8 *step, u32 *delay) +u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8 *stage, + u8 *step, u32 *delay) { struct r8192_priv *priv = ieee80211_priv(dev); SwChnlCmd PreCommonCmd[MAX_PRECMD_CNT]; @@ -1522,7 +1521,8 @@ void rtl8192_SetBWModeWorkItem(struct net_device *dev) * Note: I doubt whether SetBWModeInProgress flag is necessary as we can * test whether current work in the queue or not.//do I? * ***************************************************************************/ -void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, HT_EXTCHNL_OFFSET Offset) +void rtl8192_SetBWMode(struct net_device *dev, HT_CHANNEL_WIDTH Bandwidth, + HT_EXTCHNL_OFFSET Offset) { struct r8192_priv *priv = ieee80211_priv(dev);