From: Andrew Victor Date: Wed, 9 Feb 2005 09:09:05 +0000 (+0000) Subject: [JFFS2] Core changes required to support JFFS2-on-Dataflash devices. X-Git-Tag: v2.6.13-rc3~93^2~109 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=3be36675d41a30ed3b192f92684f1417aa0f8bfe;p=~emulex%2Finfiniband.git [JFFS2] Core changes required to support JFFS2-on-Dataflash devices. DataFlash page-sizes are not a power of two (they're multiples of 528 bytes). There are a few places in JFFS2 code where sector_size is used as a bitmask. A new macro (SECTOR_ADDR) was defined to calculate these sector addresses. For non-DataFlash devices, the original (faster) bitmask operation is still used. In scan.c, the EMPTY_SCAN_SIZE was a constant of 1024. Since this could be larger than the sector size of the DataFlash, this is now basically set to MIN(sector_size, 1024). Addition of a jffs2_is_writebuffered() macro. Signed-off-by: Andrew Victor Signed-off-by: Thomas Gleixner --- diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c index 41451e8bf36..ae858f87887 100644 --- a/fs/jffs2/erase.c +++ b/fs/jffs2/erase.c @@ -7,7 +7,7 @@ * * For licensing information, see the file 'LICENCE' in this directory. * - * $Id: erase.c,v 1.66 2004/11/16 20:36:11 dwmw2 Exp $ + * $Id: erase.c,v 1.70 2005/02/09 09:09:01 pavlov Exp $ * */ @@ -233,7 +233,7 @@ static inline void jffs2_remove_node_refs_from_ino_list(struct jffs2_sb_info *c, continue; } - if (((*prev)->flash_offset & ~(c->sector_size -1)) == jeb->offset) { + if (SECTOR_ADDR((*prev)->flash_offset) == jeb->offset) { /* It's in the block we're erasing */ struct jffs2_raw_node_ref *this; diff --git a/fs/jffs2/gc.c b/fs/jffs2/gc.c index 87ec74ff593..61ae001eced 100644 --- a/fs/jffs2/gc.c +++ b/fs/jffs2/gc.c @@ -7,7 +7,7 @@ * * For licensing information, see the file 'LICENCE' in this directory. * - * $Id: gc.c,v 1.144 2004/12/21 11:18:50 dwmw2 Exp $ + * $Id: gc.c,v 1.145 2005/02/09 09:09:01 pavlov Exp $ * */ @@ -816,8 +816,7 @@ static int jffs2_garbage_collect_deletion_dirent(struct jffs2_sb_info *c, struct /* Doesn't matter if there's one in the same erase block. We're going to delete it too at the same time. */ - if ((raw->flash_offset & ~(c->sector_size-1)) == - (fd->raw->flash_offset & ~(c->sector_size-1))) + if (SECTOR_ADDR(raw->flash_offset) == SECTOR_ADDR(fd->raw->flash_offset)) continue; D1(printk(KERN_DEBUG "Check potential deletion dirent at %08x\n", ref_offset(raw))); diff --git a/fs/jffs2/os-linux.h b/fs/jffs2/os-linux.h index 03b0acc37b7..0412416d1f2 100644 --- a/fs/jffs2/os-linux.h +++ b/fs/jffs2/os-linux.h @@ -7,7 +7,7 @@ * * For licensing information, see the file 'LICENCE' in this directory. * - * $Id: os-linux.h,v 1.51 2004/11/16 20:36:11 dwmw2 Exp $ + * $Id: os-linux.h,v 1.52 2005/02/09 09:09:01 pavlov Exp $ * */ @@ -97,7 +97,10 @@ static inline void jffs2_init_inode_info(struct jffs2_inode_info *f) #endif } +#define SECTOR_ADDR(x) ( ((unsigned long)(x) & ~(c->sector_size-1)) ) + #define jffs2_is_readonly(c) (OFNI_BS_2SFFJ(c)->s_flags & MS_RDONLY) +#define jffs2_is_writebuffered(c) (c->wbuf != NULL) #if (!defined CONFIG_JFFS2_FS_NAND && !defined CONFIG_JFFS2_FS_NOR_ECC) #define jffs2_can_mark_obsolete(c) (1) diff --git a/fs/jffs2/scan.c b/fs/jffs2/scan.c index ded53584a89..76859ff5343 100644 --- a/fs/jffs2/scan.c +++ b/fs/jffs2/scan.c @@ -7,7 +7,7 @@ * * For licensing information, see the file 'LICENCE' in this directory. * - * $Id: scan.c,v 1.115 2004/11/17 12:59:08 dedekind Exp $ + * $Id: scan.c,v 1.116 2005/02/09 09:09:02 pavlov Exp $ * */ #include @@ -19,7 +19,7 @@ #include #include "nodelist.h" -#define EMPTY_SCAN_SIZE 1024 +#define DEFAULT_EMPTY_SCAN_SIZE 1024 #define DIRTY_SPACE(x) do { typeof(x) _x = (x); \ c->free_size -= _x; c->dirty_size += _x; \ @@ -75,6 +75,14 @@ static inline int min_free(struct jffs2_sb_info *c) return min; } + +static inline uint32_t EMPTY_SCAN_SIZE(uint32_t sector_size) { + if (sector_size < DEFAULT_EMPTY_SCAN_SIZE) + return sector_size; + else + return DEFAULT_EMPTY_SCAN_SIZE; +} + int jffs2_scan_medium(struct jffs2_sb_info *c) { int i, ret; @@ -316,7 +324,7 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo if (!buf_size) { buf_len = c->sector_size; } else { - buf_len = EMPTY_SCAN_SIZE; + buf_len = EMPTY_SCAN_SIZE(c->sector_size); err = jffs2_fill_scan_buf(c, buf, buf_ofs, buf_len); if (err) return err; @@ -326,10 +334,10 @@ static int jffs2_scan_eraseblock (struct jffs2_sb_info *c, struct jffs2_eraseblo ofs = 0; /* Scan only 4KiB of 0xFF before declaring it's empty */ - while(ofs < EMPTY_SCAN_SIZE && *(uint32_t *)(&buf[ofs]) == 0xFFFFFFFF) + while(ofs < EMPTY_SCAN_SIZE(c->sector_size) && *(uint32_t *)(&buf[ofs]) == 0xFFFFFFFF) ofs += 4; - if (ofs == EMPTY_SCAN_SIZE) { + if (ofs == EMPTY_SCAN_SIZE(c->sector_size)) { #ifdef CONFIG_JFFS2_FS_NAND if (jffs2_cleanmarker_oob(c)) { /* scan oob, take care of cleanmarker */ @@ -423,7 +431,7 @@ scan_more: bail now */ if (buf_ofs == jeb->offset && jeb->used_size == PAD(c->cleanmarker_size) && c->cleanmarker_size && !jeb->dirty_size && !jeb->first_node->next_in_ino) { - D1(printk(KERN_DEBUG "%d bytes at start of block seems clean... assuming all clean\n", EMPTY_SCAN_SIZE)); + D1(printk(KERN_DEBUG "%d bytes at start of block seems clean... assuming all clean\n", EMPTY_SCAN_SIZE(c->sector_size))); return BLK_STATE_CLEANMARKER; } diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c index 79414abadd5..894dea88678 100644 --- a/fs/jffs2/wbuf.c +++ b/fs/jffs2/wbuf.c @@ -9,7 +9,7 @@ * * For licensing information, see the file 'LICENCE' in this directory. * - * $Id: wbuf.c,v 1.86 2005/02/05 18:23:37 hammache Exp $ + * $Id: wbuf.c,v 1.87 2005/02/09 09:09:02 pavlov Exp $ * */ @@ -415,9 +415,9 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad) int ret; size_t retlen; - /* Nothing to do if not NAND flash. In particular, we shouldn't + /* Nothing to do if not write-buffering the flash. In particular, we shouldn't del_timer() the timer we never initialised. */ - if (jffs2_can_mark_obsolete(c)) + if (!jffs2_is_writebuffered(c)) return 0; if (!down_trylock(&c->alloc_sem)) { @@ -426,7 +426,7 @@ static int __jffs2_flush_wbuf(struct jffs2_sb_info *c, int pad) BUG(); } - if(!c->wbuf || !c->wbuf_len) + if (!c->wbuf_len) /* already checked c->wbuf above */ return 0; /* claim remaining space on the page @@ -620,7 +620,7 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig uint32_t outvec_to = to; /* If not NAND flash, don't bother */ - if (!c->wbuf) + if (!jffs2_is_writebuffered(c)) return jffs2_flash_direct_writev(c, invecs, count, to, retlen); down_write(&c->wbuf_sem); @@ -649,7 +649,7 @@ int jffs2_flash_writev(struct jffs2_sb_info *c, const struct kvec *invecs, unsig erase block. Anything else, and you die. New block starts at xxx000c (0-b = block header) */ - if ( (to & ~(c->sector_size-1)) != (c->wbuf_ofs & ~(c->sector_size-1)) ) { + if (SECTOR_ADDR(to) != SECTOR_ADDR(c->wbuf_ofs)) { /* It's a write to a new block */ if (c->wbuf_len) { D1(printk(KERN_DEBUG "jffs2_flash_writev() to 0x%lx causes flush of wbuf at 0x%08x\n", (unsigned long)to, c->wbuf_ofs)); @@ -847,7 +847,7 @@ int jffs2_flash_write(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *r { struct kvec vecs[1]; - if (jffs2_can_mark_obsolete(c)) + if (!jffs2_is_writebuffered(c)) return c->mtd->write(c->mtd, ofs, len, retlen, buf); vecs[0].iov_base = (unsigned char *) buf; @@ -863,38 +863,37 @@ int jffs2_flash_read(struct jffs2_sb_info *c, loff_t ofs, size_t len, size_t *re loff_t orbf = 0, owbf = 0, lwbf = 0; int ret; - /* Read flash */ - if (!jffs2_can_mark_obsolete(c)) { - - if (jffs2_cleanmarker_oob(c)) - ret = c->mtd->read_ecc(c->mtd, ofs, len, retlen, buf, NULL, c->oobinfo); - else - ret = c->mtd->read(c->mtd, ofs, len, retlen, buf); - - if ( (ret == -EBADMSG) && (*retlen == len) ) { - printk(KERN_WARNING "mtd->read(0x%zx bytes from 0x%llx) returned ECC error\n", - len, ofs); - /* - * We have the raw data without ECC correction in the buffer, maybe - * we are lucky and all data or parts are correct. We check the node. - * If data are corrupted node check will sort it out. - * We keep this block, it will fail on write or erase and the we - * mark it bad. Or should we do that now? But we should give him a chance. - * Maybe we had a system crash or power loss before the ecc write or - * a erase was completed. - * So we return success. :) - */ - ret = 0; - } - } else + if (!jffs2_is_writebuffered(c)) return c->mtd->read(c->mtd, ofs, len, retlen, buf); + /* Read flash */ + if (jffs2_cleanmarker_oob(c)) + ret = c->mtd->read_ecc(c->mtd, ofs, len, retlen, buf, NULL, c->oobinfo); + else + ret = c->mtd->read(c->mtd, ofs, len, retlen, buf); + + if ( (ret == -EBADMSG) && (*retlen == len) ) { + printk(KERN_WARNING "mtd->read(0x%zx bytes from 0x%llx) returned ECC error\n", + len, ofs); + /* + * We have the raw data without ECC correction in the buffer, maybe + * we are lucky and all data or parts are correct. We check the node. + * If data are corrupted node check will sort it out. + * We keep this block, it will fail on write or erase and the we + * mark it bad. Or should we do that now? But we should give him a chance. + * Maybe we had a system crash or power loss before the ecc write or + * a erase was completed. + * So we return success. :) + */ + ret = 0; + } + /* if no writebuffer available or write buffer empty, return */ if (!c->wbuf_pagesize || !c->wbuf_len) return ret;; /* if we read in a different block, return */ - if ( (ofs & ~(c->sector_size-1)) != (c->wbuf_ofs & ~(c->sector_size-1)) ) + if (SECTOR_ADDR(ofs) != SECTOR_ADDR(c->wbuf_ofs)) return ret; /* Lock only if we have reason to believe wbuf contains relevant data,