From: Dimitris Lampridis Date: Thu, 13 Mar 2014 13:11:47 +0000 (+0200) Subject: tty/serial: omap: empty the RX FIFO at the end of half-duplex TX X-Git-Tag: v3.15-rc1~138^2 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=3a13884abea08a5043b98d9374486ec859d1e03a;p=~emulex%2Finfiniband.git tty/serial: omap: empty the RX FIFO at the end of half-duplex TX Provided that the SER_RS485_RX_DURING_TX flag is not set, empty the RX FIFO to prevent reading back the transmitted data. Signed-off-by: Dimitris Lampridis Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 65abea2c6e4..dd8b1a5458f 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -342,6 +342,12 @@ static void serial_omap_stop_tx(struct uart_port *port) if ((up->rs485.flags & SER_RS485_ENABLED) && !(up->rs485.flags & SER_RS485_RX_DURING_TX)) { + /* + * Empty the RX FIFO, we are not interested in anything + * received during the half-duplex transmission. + */ + serial_out(up, UART_FCR, up->fcr | UART_FCR_CLEAR_RCVR); + /* Re-enable RX interrupts */ up->ier |= UART_IER_RLSI | UART_IER_RDI; up->port.read_status_mask |= UART_LSR_DR; serial_out(up, UART_IER, up->ier);