From: Peter Meerwald
Date: Mon, 24 Sep 2012 06:53:49 +0000 (+0800)
Subject: leds: add output driver configuration for pca9633 led driver
X-Git-Tag: v3.7-rc1~60^2
X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=2f73c3927318abe3d7fcaecadfbad89e2d12f881;p=~emulex%2Finfiniband.git
leds: add output driver configuration for pca9633 led driver
the pca9633 leds driver can be used in open-drain or totem pole (a.k.a.
push/pull) output driver mode; default is the later
the patch allows to set the output driver mode using platform data (similar to
configuration inferface provided by the tca6507 led driver)
v2: move leds-pca9633.h to include/linux/platform_data/ (Bryan Wu)
Signed-off-by: Peter Meerwald
Signed-off-by: Bryan Wu
---
diff --git a/drivers/leds/leds-pca9633.c b/drivers/leds/leds-pca9633.c
index edcd706c563..2f2f9c43535 100644
--- a/drivers/leds/leds-pca9633.c
+++ b/drivers/leds/leds-pca9633.c
@@ -22,6 +22,7 @@
#include
#include
#include
+#include
/* LED select registers determine the source that drives LED outputs */
#define PCA9633_LED_OFF 0x0 /* LED driver off */
@@ -96,13 +97,13 @@ static int __devinit pca9633_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct pca9633_led *pca9633;
- struct led_platform_data *pdata;
+ struct pca9633_platform_data *pdata;
int i, err;
pdata = client->dev.platform_data;
if (pdata) {
- if (pdata->num_leds <= 0 || pdata->num_leds > 4) {
+ if (pdata->leds.num_leds <= 0 || pdata->leds.num_leds > 4) {
dev_err(&client->dev, "board info must claim at most 4 LEDs");
return -EINVAL;
}
@@ -119,14 +120,14 @@ static int __devinit pca9633_probe(struct i2c_client *client,
pca9633[i].led_num = i;
/* Platform data can specify LED names and default triggers */
- if (pdata && i < pdata->num_leds) {
- if (pdata->leds[i].name)
+ if (pdata && i < pdata->leds.num_leds) {
+ if (pdata->leds.leds[i].name)
snprintf(pca9633[i].name,
sizeof(pca9633[i].name), "pca9633:%s",
- pdata->leds[i].name);
- if (pdata->leds[i].default_trigger)
+ pdata->leds.leds[i].name);
+ if (pdata->leds.leds[i].default_trigger)
pca9633[i].led_cdev.default_trigger =
- pdata->leds[i].default_trigger;
+ pdata->leds.leds[i].default_trigger;
} else {
snprintf(pca9633[i].name, sizeof(pca9633[i].name),
"pca9633:%d", i);
@@ -145,6 +146,10 @@ static int __devinit pca9633_probe(struct i2c_client *client,
/* Disable LED all-call address and set normal mode */
i2c_smbus_write_byte_data(client, PCA9633_MODE1, 0x00);
+ /* Configure output: open-drain or totem pole (push-pull) */
+ if (pdata && pdata->outdrv == PCA9633_OPEN_DRAIN)
+ i2c_smbus_write_byte_data(client, PCA9633_MODE2, 0x01);
+
/* Turn off LEDs */
i2c_smbus_write_byte_data(client, PCA9633_LEDOUT, 0x00);
diff --git a/include/linux/platform_data/leds-pca9633.h b/include/linux/platform_data/leds-pca9633.h
new file mode 100644
index 00000000000..c5bf29b6fa7
--- /dev/null
+++ b/include/linux/platform_data/leds-pca9633.h
@@ -0,0 +1,35 @@
+/*
+ * PCA9633 LED chip driver.
+ *
+ * Copyright 2012 bct electronic GmbH
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ */
+
+#ifndef __LINUX_PCA9633_H
+#define __LINUX_PCA9633_H
+#include
+
+enum pca9633_outdrv {
+ PCA9633_OPEN_DRAIN,
+ PCA9633_TOTEM_POLE, /* aka push-pull */
+};
+
+struct pca9633_platform_data {
+ struct led_platform_data leds;
+ enum pca9633_outdrv outdrv;
+};
+
+#endif /* __LINUX_PCA9633_H*/