From: Huang Shijie Date: Fri, 17 May 2013 03:17:31 +0000 (+0800) Subject: mtd: add ECC info for nand_flash_dev{} X-Git-Tag: v3.12-rc1~82^2~53 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=2dc0bdd91bb63f7d5755137177315c49637f6a96;p=~emulex%2Finfiniband.git mtd: add ECC info for nand_flash_dev{} Add an instance of an anonymous struct to store the ECC info for full id nand chips. @ecc.strength_ds: ECC correctability from the datasheet. @ecc.step_ds: ECC size required by the @ecc.strength_ds, These two fields are all from the datasheet. Also add the necessary macros to make the code simple and clean. Signed-off-by: Huang Shijie Signed-off-by: Brian Norris Signed-off-by: David Woodhouse --- diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index bf4c566f064..ac8e89d5a79 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -628,6 +628,11 @@ struct nand_chip { { .name = (nm), {{ .dev_id = (devid) }}, .chipsize = (chipsz), \ .options = (opts) } +#define NAND_ECC_INFO(_strength, _step) \ + { .strength_ds = (_strength), .step_ds = (_step) } +#define NAND_ECC_STRENGTH(type) ((type)->ecc.strength_ds) +#define NAND_ECC_STEP(type) ((type)->ecc.step_ds) + /** * struct nand_flash_dev - NAND Flash Device ID Structure * @name: a human-readable name of the NAND chip @@ -645,6 +650,12 @@ struct nand_chip { * @options: stores various chip bit options * @id_len: The valid length of the @id. * @oobsize: OOB size + * @ecc.strength_ds: The ECC correctability from the datasheet, same as the + * @ecc_strength_ds in nand_chip{}. + * @ecc.step_ds: The ECC step required by the @ecc.strength_ds, same as the + * @ecc_step_ds in nand_chip{}, also from the datasheet. + * For example, the "4bit ECC for each 512Byte" can be set with + * NAND_ECC_INFO(4, 512). */ struct nand_flash_dev { char *name; @@ -661,6 +672,10 @@ struct nand_flash_dev { unsigned int options; uint16_t id_len; uint16_t oobsize; + struct { + uint16_t strength_ds; + uint16_t step_ds; + } ecc; }; /**