From: George Date: Fri, 11 Feb 2011 20:27:49 +0000 (-0600) Subject: rtlwifi: Add usb driver X-Git-Tag: v2.6.39-rc1~468^2~238^2^2~61 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=2ca20f79e0d895489ae2f79fa321077e5ee2981d;p=~emulex%2Finfiniband.git rtlwifi: Add usb driver Signed-off-by: Larry Finger Signed-off-by: George Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/rtlwifi/Makefile b/drivers/net/wireless/rtlwifi/Makefile index 2a7a4384f8e..efbff2f478b 100644 --- a/drivers/net/wireless/rtlwifi/Makefile +++ b/drivers/net/wireless/rtlwifi/Makefile @@ -8,6 +8,7 @@ rtlwifi-objs := \ pci.o \ ps.o \ rc.o \ - regd.o + regd.o \ + usb.o obj-$(CONFIG_RTL8192CE) += rtl8192ce/ diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c new file mode 100644 index 00000000000..fbf24a0f905 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -0,0 +1,1035 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + *****************************************************************************/ +#include +#include "core.h" +#include "wifi.h" +#include "usb.h" +#include "base.h" +#include "ps.h" + +#define REALTEK_USB_VENQT_READ 0xC0 +#define REALTEK_USB_VENQT_WRITE 0x40 +#define REALTEK_USB_VENQT_CMD_REQ 0x05 +#define REALTEK_USB_VENQT_CMD_IDX 0x00 + +#define REALTEK_USB_VENQT_MAX_BUF_SIZE 254 + +static void usbctrl_async_callback(struct urb *urb) +{ + if (urb) + kfree(urb->context); +} + +static int _usbctrl_vendorreq_async_write(struct usb_device *udev, u8 request, + u16 value, u16 index, void *pdata, + u16 len) +{ + int rc; + unsigned int pipe; + u8 reqtype; + struct usb_ctrlrequest *dr; + struct urb *urb; + struct rtl819x_async_write_data { + u8 data[REALTEK_USB_VENQT_MAX_BUF_SIZE]; + struct usb_ctrlrequest dr; + } *buf; + + pipe = usb_sndctrlpipe(udev, 0); /* write_out */ + reqtype = REALTEK_USB_VENQT_WRITE; + + buf = kmalloc(sizeof(*buf), GFP_ATOMIC); + if (!buf) + return -ENOMEM; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + kfree(buf); + return -ENOMEM; + } + + dr = &buf->dr; + + dr->bRequestType = reqtype; + dr->bRequest = request; + dr->wValue = cpu_to_le16(value); + dr->wIndex = cpu_to_le16(index); + dr->wLength = cpu_to_le16(len); + memcpy(buf, pdata, len); + usb_fill_control_urb(urb, udev, pipe, + (unsigned char *)dr, buf, len, + usbctrl_async_callback, buf); + rc = usb_submit_urb(urb, GFP_ATOMIC); + if (rc < 0) + kfree(buf); + usb_free_urb(urb); + return rc; +} + +static int _usbctrl_vendorreq_sync_read(struct usb_device *udev, u8 request, + u16 value, u16 index, void *pdata, + u16 len) +{ + unsigned int pipe; + int status; + u8 reqtype; + + pipe = usb_rcvctrlpipe(udev, 0); /* read_in */ + reqtype = REALTEK_USB_VENQT_READ; + + status = usb_control_msg(udev, pipe, request, reqtype, value, index, + pdata, len, 0); /* max. timeout */ + + if (status < 0) + printk(KERN_ERR "reg 0x%x, usbctrl_vendorreq TimeOut! " + "status:0x%x value=0x%x\n", value, status, + *(u32 *)pdata); + return status; +} + +static u32 _usb_read_sync(struct usb_device *udev, u32 addr, u16 len) +{ + u8 request; + u16 wvalue; + u16 index; + u32 *data; + u32 ret; + + data = kmalloc(sizeof(u32), GFP_KERNEL); + if (!data) + return -ENOMEM; + request = REALTEK_USB_VENQT_CMD_REQ; + index = REALTEK_USB_VENQT_CMD_IDX; /* n/a */ + + wvalue = (u16)addr; + _usbctrl_vendorreq_sync_read(udev, request, wvalue, index, data, len); + ret = le32_to_cpu(*data); + kfree(data); + return ret; +} + +static u8 _usb_read8_sync(struct rtl_priv *rtlpriv, u32 addr) +{ + struct device *dev = rtlpriv->io.dev; + + return (u8)_usb_read_sync(to_usb_device(dev), addr, 1); +} + +static u16 _usb_read16_sync(struct rtl_priv *rtlpriv, u32 addr) +{ + struct device *dev = rtlpriv->io.dev; + + return (u16)_usb_read_sync(to_usb_device(dev), addr, 2); +} + +static u32 _usb_read32_sync(struct rtl_priv *rtlpriv, u32 addr) +{ + struct device *dev = rtlpriv->io.dev; + + return _usb_read_sync(to_usb_device(dev), addr, 4); +} + +static void _usb_write_async(struct usb_device *udev, u32 addr, u32 val, + u16 len) +{ + u8 request; + u16 wvalue; + u16 index; + u32 data; + + request = REALTEK_USB_VENQT_CMD_REQ; + index = REALTEK_USB_VENQT_CMD_IDX; /* n/a */ + wvalue = (u16)(addr&0x0000ffff); + data = cpu_to_le32(val); + _usbctrl_vendorreq_async_write(udev, request, wvalue, index, &data, + len); +} + +static void _usb_write8_async(struct rtl_priv *rtlpriv, u32 addr, u8 val) +{ + struct device *dev = rtlpriv->io.dev; + + _usb_write_async(to_usb_device(dev), addr, val, 1); +} + +static void _usb_write16_async(struct rtl_priv *rtlpriv, u32 addr, u16 val) +{ + struct device *dev = rtlpriv->io.dev; + + _usb_write_async(to_usb_device(dev), addr, val, 2); +} + +static void _usb_write32_async(struct rtl_priv *rtlpriv, u32 addr, u32 val) +{ + struct device *dev = rtlpriv->io.dev; + + _usb_write_async(to_usb_device(dev), addr, val, 4); +} + +static int _usb_nbytes_read_write(struct usb_device *udev, bool read, u32 addr, + u16 len, u8 *pdata) +{ + int status; + u8 request; + u16 wvalue; + u16 index; + + request = REALTEK_USB_VENQT_CMD_REQ; + index = REALTEK_USB_VENQT_CMD_IDX; /* n/a */ + wvalue = (u16)addr; + if (read) + status = _usbctrl_vendorreq_sync_read(udev, request, wvalue, + index, pdata, len); + else + status = _usbctrl_vendorreq_async_write(udev, request, wvalue, + index, pdata, len); + return status; +} + +static int _usb_readN_sync(struct rtl_priv *rtlpriv, u32 addr, u16 len, + u8 *pdata) +{ + struct device *dev = rtlpriv->io.dev; + + return _usb_nbytes_read_write(to_usb_device(dev), true, addr, len, + pdata); +} + +static int _usb_writeN_async(struct rtl_priv *rtlpriv, u32 addr, u16 len, + u8 *pdata) +{ + struct device *dev = rtlpriv->io.dev; + + return _usb_nbytes_read_write(to_usb_device(dev), false, addr, len, + pdata); +} + +static void _rtl_usb_io_handler_init(struct device *dev, + struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + rtlpriv->io.dev = dev; + mutex_init(&rtlpriv->io.bb_mutex); + rtlpriv->io.write8_async = _usb_write8_async; + rtlpriv->io.write16_async = _usb_write16_async; + rtlpriv->io.write32_async = _usb_write32_async; + rtlpriv->io.writeN_async = _usb_writeN_async; + rtlpriv->io.read8_sync = _usb_read8_sync; + rtlpriv->io.read16_sync = _usb_read16_sync; + rtlpriv->io.read32_sync = _usb_read32_sync; + rtlpriv->io.readN_sync = _usb_readN_sync; +} + +static void _rtl_usb_io_handler_release(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + + mutex_destroy(&rtlpriv->io.bb_mutex); +} + +/** + * + * Default aggregation handler. Do nothing and just return the oldest skb. + */ +static struct sk_buff *_none_usb_tx_aggregate_hdl(struct ieee80211_hw *hw, + struct sk_buff_head *list) +{ + return skb_dequeue(list); +} + +#define IS_HIGH_SPEED_USB(udev) \ + ((USB_SPEED_HIGH == (udev)->speed) ? true : false) + +static int _rtl_usb_init_tx(struct ieee80211_hw *hw) +{ + u32 i; + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + + rtlusb->max_bulk_out_size = IS_HIGH_SPEED_USB(rtlusb->udev) + ? USB_HIGH_SPEED_BULK_SIZE + : USB_FULL_SPEED_BULK_SIZE; + + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, ("USB Max Bulk-out Size=%d\n", + rtlusb->max_bulk_out_size)); + + for (i = 0; i < __RTL_TXQ_NUM; i++) { + u32 ep_num = rtlusb->ep_map.ep_mapping[i]; + if (!ep_num) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, + ("Invalid endpoint map setting!\n")); + return -EINVAL; + } + } + + rtlusb->usb_tx_post_hdl = + rtlpriv->cfg->usb_interface_cfg->usb_tx_post_hdl; + rtlusb->usb_tx_cleanup = + rtlpriv->cfg->usb_interface_cfg->usb_tx_cleanup; + rtlusb->usb_tx_aggregate_hdl = + (rtlpriv->cfg->usb_interface_cfg->usb_tx_aggregate_hdl) + ? rtlpriv->cfg->usb_interface_cfg->usb_tx_aggregate_hdl + : &_none_usb_tx_aggregate_hdl; + + init_usb_anchor(&rtlusb->tx_submitted); + for (i = 0; i < RTL_USB_MAX_EP_NUM; i++) { + skb_queue_head_init(&rtlusb->tx_skb_queue[i]); + init_usb_anchor(&rtlusb->tx_pending[i]); + } + return 0; +} + +static int _rtl_usb_init_rx(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw); + struct rtl_usb *rtlusb = rtl_usbdev(usb_priv); + + rtlusb->rx_max_size = rtlpriv->cfg->usb_interface_cfg->rx_max_size; + rtlusb->rx_urb_num = rtlpriv->cfg->usb_interface_cfg->rx_urb_num; + rtlusb->in_ep = rtlpriv->cfg->usb_interface_cfg->in_ep_num; + rtlusb->usb_rx_hdl = rtlpriv->cfg->usb_interface_cfg->usb_rx_hdl; + rtlusb->usb_rx_segregate_hdl = + rtlpriv->cfg->usb_interface_cfg->usb_rx_segregate_hdl; + + printk(KERN_INFO "rtl8192cu: rx_max_size %d, rx_urb_num %d, in_ep %d\n", + rtlusb->rx_max_size, rtlusb->rx_urb_num, rtlusb->in_ep); + init_usb_anchor(&rtlusb->rx_submitted); + return 0; +} + +static int _rtl_usb_init(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_usb_priv *usb_priv = rtl_usbpriv(hw); + struct rtl_usb *rtlusb = rtl_usbdev(usb_priv); + int err; + u8 epidx; + struct usb_interface *usb_intf = rtlusb->intf; + u8 epnums = usb_intf->cur_altsetting->desc.bNumEndpoints; + + rtlusb->out_ep_nums = rtlusb->in_ep_nums = 0; + for (epidx = 0; epidx < epnums; epidx++) { + struct usb_endpoint_descriptor *pep_desc; + pep_desc = &usb_intf->cur_altsetting->endpoint[epidx].desc; + + if (usb_endpoint_dir_in(pep_desc)) + rtlusb->in_ep_nums++; + else if (usb_endpoint_dir_out(pep_desc)) + rtlusb->out_ep_nums++; + + RT_TRACE(rtlpriv, COMP_INIT, DBG_DMESG, + ("USB EP(0x%02x), MaxPacketSize=%d ,Interval=%d.\n", + pep_desc->bEndpointAddress, pep_desc->wMaxPacketSize, + pep_desc->bInterval)); + } + if (rtlusb->in_ep_nums < rtlpriv->cfg->usb_interface_cfg->in_ep_num) + return -EINVAL ; + + /* usb endpoint mapping */ + err = rtlpriv->cfg->usb_interface_cfg->usb_endpoint_mapping(hw); + rtlusb->usb_mq_to_hwq = rtlpriv->cfg->usb_interface_cfg->usb_mq_to_hwq; + _rtl_usb_init_tx(hw); + _rtl_usb_init_rx(hw); + return err; +} + +static int _rtl_usb_init_sw(struct ieee80211_hw *hw) +{ + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + + rtlhal->hw = hw; + ppsc->b_inactiveps = false; + ppsc->b_leisure_ps = false; + ppsc->b_fwctrl_lps = false; + ppsc->b_reg_fwctrl_lps = 3; + ppsc->reg_max_lps_awakeintvl = 5; + ppsc->fwctrl_psmode = FW_PS_DTIM_MODE; + + /* IBSS */ + mac->beacon_interval = 100; + + /* AMPDU */ + mac->min_space_cfg = 0; + mac->max_mss_density = 0; + + /* set sane AMPDU defaults */ + mac->current_ampdu_density = 7; + mac->current_ampdu_factor = 3; + + /* QOS */ + rtlusb->acm_method = eAcmWay2_SW; + + /* IRQ */ + /* HIMR - turn all on */ + rtlusb->irq_mask[0] = 0xFFFFFFFF; + /* HIMR_EX - turn all on */ + rtlusb->irq_mask[1] = 0xFFFFFFFF; + rtlusb->disableHWSM = true; + return 0; +} + +#define __RADIO_TAP_SIZE_RSV 32 + +static void _rtl_rx_completed(struct urb *urb); + +static struct sk_buff *_rtl_prep_rx_urb(struct ieee80211_hw *hw, + struct rtl_usb *rtlusb, + struct urb *urb, + gfp_t gfp_mask) +{ + struct sk_buff *skb; + struct rtl_priv *rtlpriv = rtl_priv(hw); + + skb = __dev_alloc_skb((rtlusb->rx_max_size + __RADIO_TAP_SIZE_RSV), + gfp_mask); + if (!skb) { + RT_TRACE(rtlpriv, COMP_USB, DBG_EMERG, + ("Failed to __dev_alloc_skb!!\n")) + return ERR_PTR(-ENOMEM); + } + + /* reserve some space for mac80211's radiotap */ + skb_reserve(skb, __RADIO_TAP_SIZE_RSV); + usb_fill_bulk_urb(urb, rtlusb->udev, + usb_rcvbulkpipe(rtlusb->udev, rtlusb->in_ep), + skb->data, min(skb_tailroom(skb), + (int)rtlusb->rx_max_size), + _rtl_rx_completed, skb); + + _rtl_install_trx_info(rtlusb, skb, rtlusb->in_ep); + return skb; +} + +#undef __RADIO_TAP_SIZE_RSV + +static void _rtl_usb_rx_process_agg(struct ieee80211_hw *hw, + struct sk_buff *skb) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 *rxdesc = skb->data; + struct ieee80211_hdr *hdr; + bool unicast = false; + u16 fc; + struct ieee80211_rx_status rx_status = {0}; + struct rtl_stats stats = { + .signal = 0, + .noise = -98, + .rate = 0, + }; + + skb_pull(skb, RTL_RX_DESC_SIZE); + rtlpriv->cfg->ops->query_rx_desc(hw, &stats, &rx_status, rxdesc, skb); + skb_pull(skb, (stats.rx_drvinfo_size + stats.rx_bufshift)); + hdr = (struct ieee80211_hdr *)(skb->data); + fc = le16_to_cpu(hdr->frame_control); + if (!stats.b_crc) { + memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); + + if (is_broadcast_ether_addr(hdr->addr1)) { + /*TODO*/; + } else if (is_multicast_ether_addr(hdr->addr1)) { + /*TODO*/ + } else { + unicast = true; + rtlpriv->stats.rxbytesunicast += skb->len; + } + + rtl_is_special_data(hw, skb, false); + + if (ieee80211_is_data(fc)) { + rtlpriv->cfg->ops->led_control(hw, LED_CTL_RX); + + if (unicast) + rtlpriv->link_info.num_rx_inperiod++; + } + } +} + +static void _rtl_usb_rx_process_noagg(struct ieee80211_hw *hw, + struct sk_buff *skb) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + u8 *rxdesc = skb->data; + struct ieee80211_hdr *hdr; + bool unicast = false; + u16 fc; + struct ieee80211_rx_status rx_status = {0}; + struct rtl_stats stats = { + .signal = 0, + .noise = -98, + .rate = 0, + }; + + skb_pull(skb, RTL_RX_DESC_SIZE); + rtlpriv->cfg->ops->query_rx_desc(hw, &stats, &rx_status, rxdesc, skb); + skb_pull(skb, (stats.rx_drvinfo_size + stats.rx_bufshift)); + hdr = (struct ieee80211_hdr *)(skb->data); + fc = le16_to_cpu(hdr->frame_control); + if (!stats.b_crc) { + memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status)); + + if (is_broadcast_ether_addr(hdr->addr1)) { + /*TODO*/; + } else if (is_multicast_ether_addr(hdr->addr1)) { + /*TODO*/ + } else { + unicast = true; + rtlpriv->stats.rxbytesunicast += skb->len; + } + + rtl_is_special_data(hw, skb, false); + + if (ieee80211_is_data(fc)) { + rtlpriv->cfg->ops->led_control(hw, LED_CTL_RX); + + if (unicast) + rtlpriv->link_info.num_rx_inperiod++; + } + if (likely(rtl_action_proc(hw, skb, false))) { + struct sk_buff *uskb = NULL; + u8 *pdata; + + uskb = dev_alloc_skb(skb->len + 128); + memcpy(IEEE80211_SKB_RXCB(uskb), &rx_status, + sizeof(rx_status)); + pdata = (u8 *)skb_put(uskb, skb->len); + memcpy(pdata, skb->data, skb->len); + dev_kfree_skb_any(skb); + ieee80211_rx_irqsafe(hw, uskb); + } else { + dev_kfree_skb_any(skb); + } + } +} + +static void _rtl_rx_pre_process(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct sk_buff *_skb; + struct sk_buff_head rx_queue; + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + + skb_queue_head_init(&rx_queue); + if (rtlusb->usb_rx_segregate_hdl) + rtlusb->usb_rx_segregate_hdl(hw, skb, &rx_queue); + WARN_ON(skb_queue_empty(&rx_queue)); + while (!skb_queue_empty(&rx_queue)) { + _skb = skb_dequeue(&rx_queue); + _rtl_usb_rx_process_agg(hw, skb); + ieee80211_rx_irqsafe(hw, skb); + } +} + +static void _rtl_rx_completed(struct urb *_urb) +{ + struct sk_buff *skb = (struct sk_buff *)_urb->context; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct rtl_usb *rtlusb = (struct rtl_usb *)info->rate_driver_data[0]; + struct ieee80211_hw *hw = usb_get_intfdata(rtlusb->intf); + struct rtl_priv *rtlpriv = rtl_priv(hw); + int err = 0; + + if (unlikely(IS_USB_STOP(rtlusb))) + goto free; + + if (likely(0 == _urb->status)) { + /* If this code were moved to work queue, would CPU + * utilization be improved? NOTE: We shall allocate another skb + * and reuse the original one. + */ + skb_put(skb, _urb->actual_length); + + if (likely(!rtlusb->usb_rx_segregate_hdl)) { + struct sk_buff *_skb; + _rtl_usb_rx_process_noagg(hw, skb); + _skb = _rtl_prep_rx_urb(hw, rtlusb, _urb, GFP_ATOMIC); + if (IS_ERR(_skb)) { + err = PTR_ERR(_skb); + RT_TRACE(rtlpriv, COMP_USB, DBG_EMERG, + ("Can't allocate skb for bulk IN!\n")); + return; + } + skb = _skb; + } else{ + /* TO DO */ + _rtl_rx_pre_process(hw, skb); + printk(KERN_ERR "rtlwifi: rx agg not supported\n"); + } + goto resubmit; + } + + switch (_urb->status) { + /* disconnect */ + case -ENOENT: + case -ECONNRESET: + case -ENODEV: + case -ESHUTDOWN: + goto free; + default: + break; + } + +resubmit: + skb_reset_tail_pointer(skb); + skb_trim(skb, 0); + + usb_anchor_urb(_urb, &rtlusb->rx_submitted); + err = usb_submit_urb(_urb, GFP_ATOMIC); + if (unlikely(err)) { + usb_unanchor_urb(_urb); + goto free; + } + return; + +free: + dev_kfree_skb_irq(skb); +} + +static int _rtl_usb_receive(struct ieee80211_hw *hw) +{ + struct urb *urb; + struct sk_buff *skb; + int err; + int i; + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + + WARN_ON(0 == rtlusb->rx_urb_num); + /* 1600 == 1514 + max WLAN header + rtk info */ + WARN_ON(rtlusb->rx_max_size < 1600); + + for (i = 0; i < rtlusb->rx_urb_num; i++) { + err = -ENOMEM; + urb = usb_alloc_urb(0, GFP_KERNEL); + if (!urb) { + RT_TRACE(rtlpriv, COMP_USB, DBG_EMERG, + ("Failed to alloc URB!!\n")) + goto err_out; + } + + skb = _rtl_prep_rx_urb(hw, rtlusb, urb, GFP_KERNEL); + if (IS_ERR(skb)) { + RT_TRACE(rtlpriv, COMP_USB, DBG_EMERG, + ("Failed to prep_rx_urb!!\n")) + err = PTR_ERR(skb); + goto err_out; + } + + usb_anchor_urb(urb, &rtlusb->rx_submitted); + err = usb_submit_urb(urb, GFP_KERNEL); + if (err) + goto err_out; + usb_free_urb(urb); + } + return 0; + +err_out: + usb_kill_anchored_urbs(&rtlusb->rx_submitted); + return err; +} + +static int rtl_usb_start(struct ieee80211_hw *hw) +{ + int err; + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + + err = rtlpriv->cfg->ops->hw_init(hw); + rtl_init_rx_config(hw); + + /* Enable software */ + SET_USB_START(rtlusb); + /* should after adapter start and interrupt enable. */ + set_hal_start(rtlhal); + + /* Start bulk IN */ + _rtl_usb_receive(hw); + + return err; +} +/** + * + * + */ + +/*======================= tx =========================================*/ +static void rtl_usb_cleanup(struct ieee80211_hw *hw) +{ + u32 i; + struct sk_buff *_skb; + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + struct ieee80211_tx_info *txinfo; + + SET_USB_STOP(rtlusb); + + /* clean up rx stuff. */ + usb_kill_anchored_urbs(&rtlusb->rx_submitted); + + /* clean up tx stuff */ + for (i = 0; i < RTL_USB_MAX_EP_NUM; i++) { + while ((_skb = skb_dequeue(&rtlusb->tx_skb_queue[i]))) { + rtlusb->usb_tx_cleanup(hw, _skb); + txinfo = IEEE80211_SKB_CB(_skb); + ieee80211_tx_info_clear_status(txinfo); + txinfo->flags |= IEEE80211_TX_STAT_ACK; + ieee80211_tx_status_irqsafe(hw, _skb); + } + usb_kill_anchored_urbs(&rtlusb->tx_pending[i]); + } + usb_kill_anchored_urbs(&rtlusb->tx_submitted); +} + +/** + * + * We may add some struct into struct rtl_usb later. Do deinit here. + * + */ +static void rtl_usb_deinit(struct ieee80211_hw *hw) +{ + rtl_usb_cleanup(hw); +} + +static void rtl_usb_stop(struct ieee80211_hw *hw) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + + /* should after adapter start and interrupt enable. */ + set_hal_stop(rtlhal); + /* Enable software */ + SET_USB_STOP(rtlusb); + rtl_usb_deinit(hw); + rtlpriv->cfg->ops->hw_disable(hw); +} + +static void _rtl_submit_tx_urb(struct ieee80211_hw *hw, struct urb *_urb) +{ + int err; + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + + usb_anchor_urb(_urb, &rtlusb->tx_submitted); + err = usb_submit_urb(_urb, GFP_ATOMIC); + if (err < 0) { + struct sk_buff *skb; + + RT_TRACE(rtlpriv, COMP_USB, DBG_EMERG, + ("Failed to submit urb.\n")); + usb_unanchor_urb(_urb); + skb = (struct sk_buff *)_urb->context; + kfree_skb(skb); + } + usb_free_urb(_urb); +} + +static int _usb_tx_post(struct ieee80211_hw *hw, struct urb *urb, + struct sk_buff *skb) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + struct ieee80211_tx_info *txinfo; + + rtlusb->usb_tx_post_hdl(hw, urb, skb); + skb_pull(skb, RTL_TX_HEADER_SIZE); + txinfo = IEEE80211_SKB_CB(skb); + ieee80211_tx_info_clear_status(txinfo); + txinfo->flags |= IEEE80211_TX_STAT_ACK; + + if (urb->status) { + RT_TRACE(rtlpriv, COMP_USB, DBG_EMERG, + ("Urb has error status 0x%X\n", urb->status)); + goto out; + } + /* TODO: statistics */ +out: + ieee80211_tx_status_irqsafe(hw, skb); + return urb->status; +} + +static void _rtl_tx_complete(struct urb *urb) +{ + struct sk_buff *skb = (struct sk_buff *)urb->context; + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct rtl_usb *rtlusb = (struct rtl_usb *)info->rate_driver_data[0]; + struct ieee80211_hw *hw = usb_get_intfdata(rtlusb->intf); + int err; + + if (unlikely(IS_USB_STOP(rtlusb))) + return; + err = _usb_tx_post(hw, urb, skb); + if (err) { + /* Ignore error and keep issuiing other urbs */ + return; + } +} + +static struct urb *_rtl_usb_tx_urb_setup(struct ieee80211_hw *hw, + struct sk_buff *skb, u32 ep_num) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + struct urb *_urb; + + WARN_ON(NULL == skb); + _urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!_urb) { + RT_TRACE(rtlpriv, COMP_USB, DBG_EMERG, + ("Can't allocate URB for bulk out!\n")); + kfree_skb(skb); + return NULL; + } + _rtl_install_trx_info(rtlusb, skb, ep_num); + usb_fill_bulk_urb(_urb, rtlusb->udev, usb_sndbulkpipe(rtlusb->udev, + ep_num), skb->data, skb->len, _rtl_tx_complete, skb); + _urb->transfer_flags |= URB_ZERO_PACKET; + return _urb; +} + +static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb, + enum rtl_txq qnum) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + u32 ep_num; + struct urb *_urb = NULL; + struct sk_buff *_skb = NULL; + struct sk_buff_head *skb_list; + struct usb_anchor *urb_list; + + WARN_ON(NULL == rtlusb->usb_tx_aggregate_hdl); + if (unlikely(IS_USB_STOP(rtlusb))) { + RT_TRACE(rtlpriv, COMP_USB, DBG_EMERG, + ("USB device is stopping...\n")); + kfree_skb(skb); + return; + } + ep_num = rtlusb->ep_map.ep_mapping[qnum]; + skb_list = &rtlusb->tx_skb_queue[ep_num]; + _skb = skb; + _urb = _rtl_usb_tx_urb_setup(hw, _skb, ep_num); + if (unlikely(!_urb)) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Can't allocate urb. Drop skb!\n")); + return; + } + urb_list = &rtlusb->tx_pending[ep_num]; + _rtl_submit_tx_urb(hw, _urb); +} + +static void _rtl_usb_tx_preprocess(struct ieee80211_hw *hw, struct sk_buff *skb, + u16 hw_queue) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + struct rtl_tx_desc *pdesc = NULL; + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data); + u16 fc = le16_to_cpu(hdr->frame_control); + u8 *pda_addr = hdr->addr1; + /* ssn */ + u8 *qc = NULL; + u8 tid = 0; + u16 seq_number = 0; + + if (ieee80211_is_mgmt(fc)) + rtl_tx_mgmt_proc(hw, skb); + rtl_action_proc(hw, skb, true); + if (is_multicast_ether_addr(pda_addr)) + rtlpriv->stats.txbytesmulticast += skb->len; + else if (is_broadcast_ether_addr(pda_addr)) + rtlpriv->stats.txbytesbroadcast += skb->len; + else + rtlpriv->stats.txbytesunicast += skb->len; + if (ieee80211_is_data_qos(fc)) { + qc = ieee80211_get_qos_ctl(hdr); + tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; + seq_number = (le16_to_cpu(hdr->seq_ctrl) & + IEEE80211_SCTL_SEQ) >> 4; + seq_number += 1; + seq_number <<= 4; + } + rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *)pdesc, info, skb, + hw_queue); + if (!ieee80211_has_morefrags(hdr->frame_control)) { + if (qc) + mac->tids[tid].seq_number = seq_number; + } + if (ieee80211_is_data(fc)) + rtlpriv->cfg->ops->led_control(hw, LED_CTL_TX); +} + +static int rtl_usb_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +{ + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)(skb->data); + u16 fc = le16_to_cpu(hdr->frame_control); + u16 hw_queue; + + if (unlikely(is_hal_stop(rtlhal))) + goto err_free; + hw_queue = rtlusb->usb_mq_to_hwq(fc, skb_get_queue_mapping(skb)); + _rtl_usb_tx_preprocess(hw, skb, hw_queue); + _rtl_usb_transmit(hw, skb, hw_queue); + return NETDEV_TX_OK; + +err_free: + dev_kfree_skb_any(skb); + return NETDEV_TX_OK; +} + +static bool rtl_usb_tx_chk_waitq_insert(struct ieee80211_hw *hw, + struct sk_buff *skb) +{ + return false; +} + +static struct rtl_intf_ops rtl_usb_ops = { + .adapter_start = rtl_usb_start, + .adapter_stop = rtl_usb_stop, + .adapter_tx = rtl_usb_tx, + .waitq_insert = rtl_usb_tx_chk_waitq_insert, +}; + +int __devinit rtl_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + int err; + struct ieee80211_hw *hw = NULL; + struct rtl_priv *rtlpriv = NULL; + struct usb_device *udev; + struct rtl_usb_priv *usb_priv; + + hw = ieee80211_alloc_hw(sizeof(struct rtl_priv) + + sizeof(struct rtl_usb_priv), &rtl_ops); + if (!hw) { + RT_ASSERT(false, ("%s : ieee80211 alloc failed\n", __func__)); + return -ENOMEM; + } + rtlpriv = hw->priv; + SET_IEEE80211_DEV(hw, &intf->dev); + udev = interface_to_usbdev(intf); + usb_get_dev(udev); + usb_priv = rtl_usbpriv(hw); + memset(usb_priv, 0, sizeof(*usb_priv)); + usb_priv->dev.intf = intf; + usb_priv->dev.udev = udev; + usb_set_intfdata(intf, hw); + /* init cfg & intf_ops */ + rtlpriv->rtlhal.interface = INTF_USB; + rtlpriv->cfg = (struct rtl_hal_cfg *)(id->driver_info); + rtlpriv->intf_ops = &rtl_usb_ops; + rtl_dbgp_flag_init(hw); + /* Init IO handler */ + _rtl_usb_io_handler_init(&udev->dev, hw); + rtlpriv->cfg->ops->read_chip_version(hw); + /*like read eeprom and so on */ + rtlpriv->cfg->ops->read_eeprom_info(hw); + if (rtlpriv->cfg->ops->init_sw_vars(hw)) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Can't init_sw_vars.\n")); + goto error_out; + } + rtlpriv->cfg->ops->init_sw_leds(hw); + err = _rtl_usb_init(hw); + err = _rtl_usb_init_sw(hw); + /* Init mac80211 sw */ + err = rtl_init_core(hw); + if (err) { + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + ("Can't allocate sw for mac80211.\n")); + goto error_out; + } + + /*init rfkill */ + /* rtl_init_rfkill(hw); */ + + err = ieee80211_register_hw(hw); + if (err) { + RT_TRACE(rtlpriv, COMP_INIT, DBG_EMERG, + ("Can't register mac80211 hw.\n")); + goto error_out; + } else { + rtlpriv->mac80211.mac80211_registered = 1; + } + set_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status); + return 0; +error_out: + rtl_deinit_core(hw); + _rtl_usb_io_handler_release(hw); + ieee80211_free_hw(hw); + usb_put_dev(udev); + return -ENODEV; +} +EXPORT_SYMBOL(rtl_usb_probe); + +void rtl_usb_disconnect(struct usb_interface *intf) +{ + struct ieee80211_hw *hw = usb_get_intfdata(intf); + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_mac *rtlmac = rtl_mac(rtl_priv(hw)); + struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); + + if (unlikely(!rtlpriv)) + return; + /*ieee80211_unregister_hw will call ops_stop */ + if (rtlmac->mac80211_registered == 1) { + ieee80211_unregister_hw(hw); + rtlmac->mac80211_registered = 0; + } else { + rtl_deinit_deferred_work(hw); + rtlpriv->intf_ops->adapter_stop(hw); + } + /*deinit rfkill */ + /* rtl_deinit_rfkill(hw); */ + rtl_usb_deinit(hw); + rtl_deinit_core(hw); + rtlpriv->cfg->ops->deinit_sw_leds(hw); + rtlpriv->cfg->ops->deinit_sw_vars(hw); + _rtl_usb_io_handler_release(hw); + usb_put_dev(rtlusb->udev); + usb_set_intfdata(intf, NULL); + ieee80211_free_hw(hw); +} +EXPORT_SYMBOL(rtl_usb_disconnect); + +int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message) +{ + return 0; +} +EXPORT_SYMBOL(rtl_usb_suspend); + +int rtl_usb_resume(struct usb_interface *pusb_intf) +{ + return 0; +} +EXPORT_SYMBOL(rtl_usb_resume); diff --git a/drivers/net/wireless/rtlwifi/usb.h b/drivers/net/wireless/rtlwifi/usb.h new file mode 100644 index 00000000000..c8331165510 --- /dev/null +++ b/drivers/net/wireless/rtlwifi/usb.h @@ -0,0 +1,164 @@ +/****************************************************************************** + * + * Copyright(c) 2009-2011 Realtek Corporation. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of version 2 of the GNU General Public License as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA + * + * The full GNU General Public License is included in this distribution in the + * file called LICENSE. + * + * Contact Information: + * wlanfae + * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park, + * Hsinchu 300, Taiwan. + * + *****************************************************************************/ + +#ifndef __RTL_USB_H__ +#define __RTL_USB_H__ + +#include +#include + +#define RTL_USB_DEVICE(vend, prod, cfg) \ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE, \ + .idVendor = (vend), \ + .idProduct = (prod), \ + .driver_info = (kernel_ulong_t)&(cfg) + +#define USB_HIGH_SPEED_BULK_SIZE 512 +#define USB_FULL_SPEED_BULK_SIZE 64 + + +#define RTL_USB_MAX_TXQ_NUM 4 /* max tx queue */ +#define RTL_USB_MAX_EP_NUM 6 /* max ep number */ +#define RTL_USB_MAX_TX_URBS_NUM 8 + +enum rtl_txq { + /* These definitions shall be consistent with value + * returned by skb_get_queue_mapping + *------------------------------------*/ + RTL_TXQ_BK, + RTL_TXQ_BE, + RTL_TXQ_VI, + RTL_TXQ_VO, + /*------------------------------------*/ + RTL_TXQ_BCN, + RTL_TXQ_MGT, + RTL_TXQ_HI, + + /* Must be last */ + __RTL_TXQ_NUM, +}; + +struct rtl_ep_map { + u32 ep_mapping[__RTL_TXQ_NUM]; +}; + +struct _trx_info { + struct rtl_usb *rtlusb; + u32 ep_num; +}; + +static inline void _rtl_install_trx_info(struct rtl_usb *rtlusb, + struct sk_buff *skb, + u32 ep_num) +{ + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); + info->rate_driver_data[0] = rtlusb; + info->rate_driver_data[1] = (void *)(__kernel_size_t)ep_num; +} + + +/* Add suspend/resume later */ +enum rtl_usb_state { + USB_STATE_STOP = 0, + USB_STATE_START = 1, +}; + +#define IS_USB_STOP(rtlusb_ptr) (USB_STATE_STOP == (rtlusb_ptr)->state) +#define IS_USB_START(rtlusb_ptr) (USB_STATE_START == (rtlusb_ptr)->state) +#define SET_USB_STOP(rtlusb_ptr) \ + do { \ + (rtlusb_ptr)->state = USB_STATE_STOP; \ + } while (0) + +#define SET_USB_START(rtlusb_ptr) \ + do { \ + (rtlusb_ptr)->state = USB_STATE_START; \ + } while (0) + +struct rtl_usb { + struct usb_device *udev; + struct usb_interface *intf; + enum rtl_usb_state state; + + /* Bcn control register setting */ + u32 reg_bcn_ctrl_val; + /* for 88/92cu card disable */ + u8 disableHWSM; + /*QOS & EDCA */ + enum acm_method acm_method; + /* irq . HIMR,HIMR_EX */ + u32 irq_mask[2]; + bool irq_enabled; + + u16 (*usb_mq_to_hwq)(u16 fc, u16 mac80211_queue_index); + + /* Tx */ + u8 out_ep_nums ; + u8 out_queue_sel; + struct rtl_ep_map ep_map; + + u32 max_bulk_out_size; + u32 tx_submitted_urbs; + struct sk_buff_head tx_skb_queue[RTL_USB_MAX_EP_NUM]; + + struct usb_anchor tx_pending[RTL_USB_MAX_EP_NUM]; + struct usb_anchor tx_submitted; + + struct sk_buff *(*usb_tx_aggregate_hdl)(struct ieee80211_hw *, + struct sk_buff_head *); + int (*usb_tx_post_hdl)(struct ieee80211_hw *, + struct urb *, struct sk_buff *); + void (*usb_tx_cleanup)(struct ieee80211_hw *, struct sk_buff *); + + /* Rx */ + u8 in_ep_nums ; + u32 in_ep; /* Bulk IN endpoint number */ + u32 rx_max_size; /* Bulk IN max buffer size */ + u32 rx_urb_num; /* How many Bulk INs are submitted to host. */ + struct usb_anchor rx_submitted; + void (*usb_rx_segregate_hdl)(struct ieee80211_hw *, struct sk_buff *, + struct sk_buff_head *); + void (*usb_rx_hdl)(struct ieee80211_hw *, struct sk_buff *); +}; + +struct rtl_usb_priv { + struct rtl_usb dev; + struct rtl_led_ctl ledctl; +}; + +#define rtl_usbpriv(hw) (((struct rtl_usb_priv *)(rtl_priv(hw))->priv)) +#define rtl_usbdev(usbpriv) (&((usbpriv)->dev)) + + + +int __devinit rtl_usb_probe(struct usb_interface *intf, + const struct usb_device_id *id); +void rtl_usb_disconnect(struct usb_interface *intf); +int rtl_usb_suspend(struct usb_interface *pusb_intf, pm_message_t message); +int rtl_usb_resume(struct usb_interface *pusb_intf); + +#endif