From: Heikki Krogerus Date: Wed, 10 Apr 2013 13:58:31 +0000 (+0300) Subject: serial: 8250_dw: Set port capabilities based on CPR register X-Git-Tag: v3.10-rc1~191^2~17 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=2920adb6dfeded0b835a809a1a2c5772d97e5965;p=~emulex%2Finfiniband.git serial: 8250_dw: Set port capabilities based on CPR register The Designware UART has an optional support for 16750 compatible Auto Flow Control. This will enable it based on the AFCE bit in Component Parameter Register. Signed-off-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c index 09aaea2d3a6..b7c7d6a6cad 100644 --- a/drivers/tty/serial/8250/8250_dw.c +++ b/drivers/tty/serial/8250/8250_dw.c @@ -221,7 +221,11 @@ static void dw8250_setup_port(struct uart_8250_port *up) p->flags |= UPF_FIXED_TYPE; p->fifosize = DW_UART_CPR_FIFO_SIZE(reg); up->tx_loadsz = p->fifosize; + up->capabilities = UART_CAP_FIFO; } + + if (reg & DW_UART_CPR_AFCE_MODE) + up->capabilities |= UART_CAP_AFE; } static int dw8250_probe(struct platform_device *pdev)