From: Juuso Oikarinen Date: Thu, 18 Mar 2010 10:26:30 +0000 (+0200) Subject: wl1271: Add proper WLAN-BT co-ex configuration, and enable co-ex. X-Git-Tag: v2.6.35-rc1~473^2~671^2~33 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=1b00f546fc4271d94c1bccb1955ce64d9ace1000;p=~shefty%2Frdma-dev.git wl1271: Add proper WLAN-BT co-ex configuration, and enable co-ex. Add configuration values for the varous WLAN-BT co-ex configuration parameters, and finally enable WLAN-BT co-ex. Based on preliminary measurements, it appears the co-ex feature is not increasing WLAN power consumption, if BT is not activated. Signed-off-by: Juuso Oikarinen Reviewed-by: Teemu Paasikivi Signed-off-by: Luciano Coelho Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.c b/drivers/net/wireless/wl12xx/wl1271_acx.c index 405ae1bf464..e7c22d3c75a 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.c +++ b/drivers/net/wireless/wl12xx/wl1271_acx.c @@ -547,7 +547,7 @@ int wl1271_acx_sg_enable(struct wl1271 *wl) goto out; } - pta->enable = ACX_SG_DISABLE; + pta->enable = wl->conf.sg.state; ret = wl1271_cmd_configure(wl, ACX_SG_ENABLE, pta, sizeof(*pta)); if (ret < 0) { @@ -564,7 +564,7 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl) { struct acx_bt_wlan_coex_param *param; struct conf_sg_settings *c = &wl->conf.sg; - int ret; + int i, ret; wl1271_debug(DEBUG_ACX, "acx sg cfg"); @@ -575,8 +575,9 @@ int wl1271_acx_sg_cfg(struct wl1271 *wl) } /* BT-WLAN coext parameters */ - param->params[ACX_SG_BT_PER_THRESHOLD] = c->per_threshold; - param->param_idx = ACX_SG_BT_PER_THRESHOLD; + for (i = 0; i < CONF_SG_PARAMS_MAX; i++) + param->params[i] = c->params[i]; + param->param_idx = CONF_SG_PARAMS_ALL; ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param)); if (ret < 0) { diff --git a/drivers/net/wireless/wl12xx/wl1271_acx.h b/drivers/net/wireless/wl12xx/wl1271_acx.h index 88a05cbd345..dee3c06a717 100644 --- a/drivers/net/wireless/wl12xx/wl1271_acx.h +++ b/drivers/net/wireless/wl12xx/wl1271_acx.h @@ -392,12 +392,6 @@ struct acx_conn_monit_params { __le32 bss_lose_timeout; /* number of TU's from synch fail */ } __attribute__ ((packed)); -enum { - ACX_SG_DISABLE = 0, - ACX_SG_PROTECTIVE, - ACX_SG_OPPORTUNISTIC -}; - struct acx_bt_wlan_coex { struct acx_header header; @@ -405,64 +399,10 @@ struct acx_bt_wlan_coex { u8 pad[3]; } __attribute__ ((packed)); -enum { - ACX_SG_BT_PER_THRESHOLD = 0, - ACX_SG_HV3_MAX_OVERRIDE, - ACX_SG_BT_NFS_SAMPLE_INTERVAL, - ACX_SG_BT_LOAD_RATIO, - ACX_SG_AUTO_PS_MODE, - ACX_SG_AUTO_SCAN_PROBE_REQ, - ACX_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, - ACX_SG_ANTENNA_CONFIGURATION, - ACX_SG_BEACON_MISS_PERCENT, - ACX_SG_RATE_ADAPT_THRESH, - ACX_SG_RATE_ADAPT_SNR, - ACX_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR, - ACX_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR, - ACX_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR, - ACX_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR, - ACX_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR, - ACX_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR, - ACX_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR, - ACX_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR, - ACX_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR, - ACX_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR, - ACX_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR, - ACX_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR, - ACX_SG_RXT, - ACX_SG_TXT, - ACX_SG_ADAPTIVE_RXT_TXT, - ACX_SG_PS_POLL_TIMEOUT, - ACX_SG_UPSD_TIMEOUT, - ACX_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR, - ACX_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR, - ACX_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR, - ACX_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR, - ACX_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR, - ACX_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR, - ACX_SG_WLAN_ACTIVE_BT_ACL_MIN_BR, - ACX_SG_WLAN_ACTIVE_BT_ACL_MAX_BR, - ACX_SG_WLAN_ACTIVE_MAX_BT_ACL_BR, - ACX_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, - ACX_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP, - ACX_SG_PASSIVE_SCAN_A2DP_BT_TIME, - ACX_SG_PASSIVE_SCAN_A2DP_WLAN_TIME, - ACX_SG_HV3_MAX_SERVED, - ACX_SG_DHCP_TIME, - ACX_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP, - ACX_SG_TEMP_PARAM_1, - ACX_SG_TEMP_PARAM_2, - ACX_SG_TEMP_PARAM_3, - ACX_SG_TEMP_PARAM_4, - ACX_SG_TEMP_PARAM_5, - ACX_SG_PARAMS_MAX, - ACX_SG_PARAMS_ALL = 0xff -}; - struct acx_bt_wlan_coex_param { struct acx_header header; - __le32 params[ACX_SG_PARAMS_MAX]; + __le32 params[CONF_SG_PARAMS_MAX]; u8 param_idx; u8 padding[3]; } __attribute__ ((packed)); diff --git a/drivers/net/wireless/wl12xx/wl1271_conf.h b/drivers/net/wireless/wl12xx/wl1271_conf.h index 6f9e75cc564..7fcfe06b141 100644 --- a/drivers/net/wireless/wl12xx/wl1271_conf.h +++ b/drivers/net/wireless/wl12xx/wl1271_conf.h @@ -65,110 +65,318 @@ enum { CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS, }; -struct conf_sg_settings { +enum { + CONF_SG_DISABLE = 0, + CONF_SG_PROTECTIVE, + CONF_SG_OPPORTUNISTIC +}; + +enum { /* - * Defines the PER threshold in PPM of the BT voice of which reaching - * this value will trigger raising the priority of the BT voice by - * the BT IP until next NFS sample interval time as defined in - * nfs_sample_interval. + * PER threshold in PPM of the BT voice * - * Unit: PER value in PPM (parts per million) - * #Error_packets / #Total_packets + * Range: 0 - 10000000 + */ + CONF_SG_BT_PER_THRESHOLD = 0, - * Range: u32 + /* + * Number of consequent RX_ACTIVE activities to override BT voice + * frames to ensure WLAN connection + * + * Range: 0 - 100 + */ + CONF_SG_HV3_MAX_OVERRIDE, + + /* + * Defines the PER threshold of the BT voice + * + * Range: 0 - 65000 + */ + CONF_SG_BT_NFS_SAMPLE_INTERVAL, + + /* + * Defines the load ratio of BT + * + * Range: 0 - 100 (%) + */ + CONF_SG_BT_LOAD_RATIO, + + /* + * Defines whether the SG will force WLAN host to enter/exit PSM + * + * Range: 1 - SG can force, 0 - host handles PSM + */ + CONF_SG_AUTO_PS_MODE, + + /* + * Compensation percentage of probe requests when scan initiated + * during BT voice/ACL link. + * + * Range: 0 - 255 (%) + */ + CONF_SG_AUTO_SCAN_PROBE_REQ, + + /* + * Compensation percentage of probe requests when active scan initiated + * during BT voice + * + * Range: 0 - 255 (%) + */ + CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3, + + /* + * Defines antenna configuration (single/dual antenna) + * + * Range: 0 - single antenna, 1 - dual antenna + */ + CONF_SG_ANTENNA_CONFIGURATION, + + /* + * The threshold (percent) of max consequtive beacon misses before + * increasing priority of beacon reception. + * + * Range: 0 - 100 (%) + */ + CONF_SG_BEACON_MISS_PERCENT, + + /* + * The rate threshold below which receiving a data frame from the AP + * will increase the priority of the data frame above BT traffic. + * + * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54 + */ + CONF_SG_RATE_ADAPT_THRESH, + + /* + * Not used currently. + * + * Range: 0 + */ + CONF_SG_RATE_ADAPT_SNR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT master basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR, + CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT master basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT slave basic rate + * + * Range: 0 - 255 (ms) */ - u32 per_threshold; + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR, + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR, /* - * This value is an absolute time in micro-seconds to limit the - * maximum scan duration compensation while in SG + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT slave basic rate + * + * Range: 0 - 255 (ms) */ - u32 max_scan_compensation_time; + CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR, - /* Defines the PER threshold of the BT voice of which reaching this - * value will trigger raising the priority of the BT voice until next - * NFS sample interval time as defined in sample_interval. + /* + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT master EDR * - * Unit: msec - * Range: 1-65000 + * Range: 0 - 255 (ms) */ - u16 nfs_sample_interval; + CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR, + CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR, /* - * Defines the load ratio for the BT. - * The WLAN ratio is: 100 - load_ratio + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT master EDR * - * Unit: Percent - * Range: 0-100 + * Range: 0 - 255 (ms) */ - u8 load_ratio; + CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR, /* - * true - Co-ex is allowed to enter/exit P.S automatically and - * transparently to the host + * Configure the min and max time BT gains the antenna + * in WLAN PSM / BT slave EDR * - * false - Co-ex is disallowed to enter/exit P.S and will trigger an - * event to the host to notify for the need to enter/exit P.S - * due to BT change state + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR, + CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR, + + /* + * The time after it expires no new WLAN trigger frame is trasmitted + * in WLAN PSM / BT slave EDR * + * Range: 0 - 255 (ms) */ - u8 auto_ps_mode; + CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR, /* - * This parameter defines the compensation percentage of num of probe - * requests in case scan is initiated during BT voice/BT ACL - * guaranteed link. + * RX guard time before the beginning of a new BT voice frame during + * which no new WLAN trigger frame is transmitted. * - * Unit: Percent - * Range: 0-255 (0 - No compensation) + * Range: 0 - 100000 (us) */ - u8 probe_req_compensation; + CONF_SG_RXT, /* - * This parameter defines the compensation percentage of scan window - * size in case scan is initiated during BT voice/BT ACL Guaranteed - * link. + * TX guard time before the beginning of a new BT voice frame during + * which no new WLAN frame is transmitted. * - * Unit: Percent - * Range: 0-255 (0 - No compensation) + * Range: 0 - 100000 (us) */ - u8 scan_window_compensation; + + CONF_SG_TXT, /* - * Defines the antenna configuration. + * Enable adaptive RXT/TXT algorithm. If disabled, the host values + * will be utilized. * - * Range: 0 - Single Antenna; 1 - Dual Antenna + * Range: 0 - disable, 1 - enable */ - u8 antenna_config; + CONF_SG_ADAPTIVE_RXT_TXT, /* - * The percent out of the Max consecutive beacon miss roaming trigger - * which is the threshold for raising the priority of beacon - * reception. + * The used WLAN legacy service period during active BT ACL link * - * Range: 1-100 - * N = MaxConsecutiveBeaconMiss - * P = coexMaxConsecutiveBeaconMissPrecent - * Threshold = MIN( N-1, round(N * P / 100)) + * Range: 0 - 255 (ms) */ - u8 beacon_miss_threshold; + CONF_SG_PS_POLL_TIMEOUT, /* - * The RX rate threshold below which rate adaptation is assumed to be - * occurring at the AP which will raise priority for ACTIVE_RX and RX - * SP. + * The used WLAN UPSD service period during active BT ACL link * - * Range: HW_BIT_RATE_* + * Range: 0 - 255 (ms) */ - u32 rate_adaptation_threshold; + CONF_SG_UPSD_TIMEOUT, /* - * The SNR above which the RX rate threshold indicating AP rate - * adaptation is valid + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT master EDR * - * Range: -128 - 127 + * Range: 0 - 255 (ms) */ - s8 rate_adaptation_snr; + CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR, + CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR, + + /* + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT master EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR, + CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR, + + /* + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT slave EDR + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR, + + /* + * Configure the min and max time BT gains the antenna + * in WLAN Active / BT basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR, + CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR, + + /* + * The maximum time WLAN can gain the antenna for + * in WLAN Active / BT basic rate + * + * Range: 0 - 255 (ms) + */ + CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR, + + /* + * Compensation percentage of WLAN passive scan window if initiated + * during BT voice + * + * Range: 0 - 1000 (%) + */ + CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3, + + /* + * Compensation percentage of WLAN passive scan window if initiated + * during BT A2DP + * + * Range: 0 - 1000 (%) + */ + CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP, + + /* + * Fixed time ensured for BT traffic to gain the antenna during WLAN + * passive scan. + * + * Range: 0 - 1000 ms + */ + CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME, + + /* + * Fixed time ensured for WLAN traffic to gain the antenna during WLAN + * passive scan. + * + * Range: 0 - 1000 ms + */ + CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME, + + /* + * Number of consequent BT voice frames not interrupted by WLAN + * + * Range: 0 - 100 + */ + CONF_SG_HV3_MAX_SERVED, + + /* + * Protection time of the DHCP procedure. + * + * Range: 0 - 100000 (ms) + */ + CONF_SG_DHCP_TIME, + + /* + * Compensation percentage of WLAN active scan window if initiated + * during BT A2DP + * + * Range: 0 - 1000 (%) + */ + CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP, + CONF_SG_TEMP_PARAM_1, + CONF_SG_TEMP_PARAM_2, + CONF_SG_TEMP_PARAM_3, + CONF_SG_TEMP_PARAM_4, + CONF_SG_TEMP_PARAM_5, + CONF_SG_PARAMS_MAX, + CONF_SG_PARAMS_ALL = 0xff +}; + +struct conf_sg_settings { + __le32 params[CONF_SG_PARAMS_MAX]; + u8 state; }; enum conf_rx_queue_type { diff --git a/drivers/net/wireless/wl12xx/wl1271_init.c b/drivers/net/wireless/wl12xx/wl1271_init.c index 86c30a86a45..d68445c9d33 100644 --- a/drivers/net/wireless/wl12xx/wl1271_init.c +++ b/drivers/net/wireless/wl12xx/wl1271_init.c @@ -160,11 +160,11 @@ int wl1271_init_pta(struct wl1271 *wl) { int ret; - ret = wl1271_acx_sg_enable(wl); + ret = wl1271_acx_sg_cfg(wl); if (ret < 0) return ret; - ret = wl1271_acx_sg_cfg(wl); + ret = wl1271_acx_sg_enable(wl); if (ret < 0) return ret; diff --git a/drivers/net/wireless/wl12xx/wl1271_main.c b/drivers/net/wireless/wl12xx/wl1271_main.c index b3abb455bd7..6501d6e2d3b 100644 --- a/drivers/net/wireless/wl12xx/wl1271_main.c +++ b/drivers/net/wireless/wl12xx/wl1271_main.c @@ -48,17 +48,57 @@ static struct conf_drv_settings default_conf = { .sg = { - .per_threshold = 7500, - .max_scan_compensation_time = 120000, - .nfs_sample_interval = 400, - .load_ratio = 50, - .auto_ps_mode = 0, - .probe_req_compensation = 170, - .scan_window_compensation = 50, - .antenna_config = 0, - .beacon_miss_threshold = 60, - .rate_adaptation_threshold = CONF_HW_BIT_RATE_12MBPS, - .rate_adaptation_snr = 0 + .params = { + [CONF_SG_BT_PER_THRESHOLD] = 7500, + [CONF_SG_HV3_MAX_OVERRIDE] = 0, + [CONF_SG_BT_NFS_SAMPLE_INTERVAL] = 400, + [CONF_SG_BT_LOAD_RATIO] = 50, + [CONF_SG_AUTO_PS_MODE] = 0, + [CONF_SG_AUTO_SCAN_PROBE_REQ] = 170, + [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50, + [CONF_SG_ANTENNA_CONFIGURATION] = 0, + [CONF_SG_BEACON_MISS_PERCENT] = 60, + [CONF_SG_RATE_ADAPT_THRESH] = 12, + [CONF_SG_RATE_ADAPT_SNR] = 0, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR] = 10, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR] = 30, + [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR] = 8, + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR] = 20, + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR] = 50, + /* Note: with UPSD, this should be 4 */ + [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR] = 8, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR] = 7, + [CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR] = 25, + [CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR] = 20, + /* Note: with UPDS, this should be 15 */ + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR] = 8, + /* Note: with UPDS, this should be 50 */ + [CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR] = 40, + /* Note: with UPDS, this should be 10 */ + [CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR] = 20, + [CONF_SG_RXT] = 1200, + [CONF_SG_TXT] = 1000, + [CONF_SG_ADAPTIVE_RXT_TXT] = 1, + [CONF_SG_PS_POLL_TIMEOUT] = 10, + [CONF_SG_UPSD_TIMEOUT] = 10, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15, + [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15, + [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR] = 8, + [CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR] = 20, + [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR] = 15, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR] = 20, + [CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR] = 50, + [CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR] = 10, + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200, + [CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800, + [CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME] = 75, + [CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME] = 15, + [CONF_SG_HV3_MAX_SERVED] = 6, + [CONF_SG_DHCP_TIME] = 5000, + [CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100, + }, + .state = CONF_SG_PROTECTIVE, }, .rx = { .rx_msdu_life_time = 512000,