From: Keith Packard Date: Sat, 6 Aug 2011 17:35:34 +0000 (-0700) Subject: drm/i915: Fix PCH port pipe select in CPT disable paths X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=1519b9956eb4b4180fa3f47c73341463cdcfaa37;p=~shefty%2Frdma-dev.git drm/i915: Fix PCH port pipe select in CPT disable paths CPT pipe select is different from previous generations (using two bits instead of one). All of the paths from intel_disable_pch_ports were not making this distinction. Mode setting with pipe A turned off would then also force all outputs on pipe B to get turned off as the disable code would mistakenly decide that all of these outputs were on pipe A and turn them off. This is an extension of the CPT DP disable fix (why didn't I fix this then?) Signed-off-by: Keith Packard Reviewed-by: Jesse Barnes --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index d1331f771e2..5baaef4a0c5 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1318,6 +1318,7 @@ #define ADPA_PIPE_SELECT_MASK (1<<30) #define ADPA_PIPE_A_SELECT 0 #define ADPA_PIPE_B_SELECT (1<<30) +#define ADPA_PIPE_SELECT(pipe) ((pipe) << 30) #define ADPA_USE_VGA_HVPOLARITY (1<<15) #define ADPA_SETS_HVPOLARITY 0 #define ADPA_VSYNC_CNTL_DISABLE (1<<11) @@ -1460,6 +1461,7 @@ /* Selects pipe B for LVDS data. Must be set on pre-965. */ #define LVDS_PIPEB_SELECT (1 << 30) #define LVDS_PIPE_MASK (1 << 30) +#define LVDS_PIPE(pipe) ((pipe) << 30) /* LVDS dithering flag on 965/g4x platform */ #define LVDS_ENABLE_DITHER (1 << 25) /* LVDS sync polarity flags. Set to invert (i.e. negative) */ @@ -1499,9 +1501,6 @@ #define LVDS_B0B3_POWER_DOWN (0 << 2) #define LVDS_B0B3_POWER_UP (3 << 2) -#define LVDS_PIPE_ENABLED(V, P) \ - (((V) & (LVDS_PIPE_MASK | LVDS_PORT_EN)) == ((P) << 30 | LVDS_PORT_EN)) - /* Video Data Island Packet control */ #define VIDEO_DIP_DATA 0x61178 #define VIDEO_DIP_CTL 0x61170 @@ -3256,14 +3255,12 @@ #define ADPA_CRT_HOTPLUG_VOLREF_475MV (1<<17) #define ADPA_CRT_HOTPLUG_FORCE_TRIGGER (1<<16) -#define ADPA_PIPE_ENABLED(V, P) \ - (((V) & (ADPA_TRANS_SELECT_MASK | ADPA_DAC_ENABLE)) == ((P) << 30 | ADPA_DAC_ENABLE)) - /* or SDVOB */ #define HDMIB 0xe1140 #define PORT_ENABLE (1 << 31) #define TRANSCODER_A (0) #define TRANSCODER_B (1 << 30) +#define TRANSCODER(pipe) ((pipe) << 30) #define TRANSCODER_MASK (1 << 30) #define COLOR_FORMAT_8bpc (0) #define COLOR_FORMAT_12bpc (3 << 26) @@ -3280,9 +3277,6 @@ #define HSYNC_ACTIVE_HIGH (1 << 3) #define PORT_DETECTED (1 << 2) -#define HDMI_PIPE_ENABLED(V, P) \ - (((V) & (TRANSCODER_MASK | PORT_ENABLE)) == ((P) << 30 | PORT_ENABLE)) - /* PCH SDVOB multiplex with HDMIB */ #define PCH_SDVOB HDMIB @@ -3349,6 +3343,7 @@ #define PORT_TRANS_B_SEL_CPT (1<<29) #define PORT_TRANS_C_SEL_CPT (2<<29) #define PORT_TRANS_SEL_MASK (3<<29) +#define PORT_TRANS_SEL_CPT(pipe) ((pipe) << 29) #define TRANS_DP_CTL_A 0xe0300 #define TRANS_DP_CTL_B 0xe1300 diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 35364e68a09..4c4c903e95a 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -998,6 +998,53 @@ static bool dp_pipe_enabled(struct drm_i915_private *dev_priv, enum pipe pipe, return true; } +static bool hdmi_pipe_enabled(struct drm_i915_private *dev_priv, + enum pipe pipe, u32 val) +{ + if ((val & PORT_ENABLE) == 0) + return false; + + if (HAS_PCH_CPT(dev_priv->dev)) { + if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe)) + return false; + } else { + if ((val & TRANSCODER_MASK) != TRANSCODER(pipe)) + return false; + } + return true; +} + +static bool lvds_pipe_enabled(struct drm_i915_private *dev_priv, + enum pipe pipe, u32 val) +{ + if ((val & LVDS_PORT_EN) == 0) + return false; + + if (HAS_PCH_CPT(dev_priv->dev)) { + if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe)) + return false; + } else { + if ((val & LVDS_PIPE_MASK) != LVDS_PIPE(pipe)) + return false; + } + return true; +} + +static bool adpa_pipe_enabled(struct drm_i915_private *dev_priv, + enum pipe pipe, u32 val) +{ + if ((val & ADPA_DAC_ENABLE) == 0) + return false; + if (HAS_PCH_CPT(dev_priv->dev)) { + if ((val & PORT_TRANS_SEL_MASK) != PORT_TRANS_SEL_CPT(pipe)) + return false; + } else { + if ((val & ADPA_PIPE_SELECT_MASK) != ADPA_PIPE_SELECT(pipe)) + return false; + } + return true; +} + static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv, enum pipe pipe, int reg, u32 port_sel) { @@ -1011,7 +1058,7 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); - WARN(HDMI_PIPE_ENABLED(val, pipe), + WARN(hdmi_pipe_enabled(dev_priv, val, pipe), "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); } @@ -1028,13 +1075,13 @@ static void assert_pch_ports_disabled(struct drm_i915_private *dev_priv, reg = PCH_ADPA; val = I915_READ(reg); - WARN(ADPA_PIPE_ENABLED(val, pipe), + WARN(adpa_pipe_enabled(dev_priv, val, pipe), "PCH VGA enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); reg = PCH_LVDS; val = I915_READ(reg); - WARN(LVDS_PIPE_ENABLED(val, pipe), + WARN(lvds_pipe_enabled(dev_priv, val, pipe), "PCH LVDS enabled on transcoder %c, should be disabled\n", pipe_name(pipe)); @@ -1370,7 +1417,7 @@ static void disable_pch_hdmi(struct drm_i915_private *dev_priv, enum pipe pipe, int reg) { u32 val = I915_READ(reg); - if (HDMI_PIPE_ENABLED(val, pipe)) { + if (hdmi_pipe_enabled(dev_priv, val, pipe)) { DRM_DEBUG_KMS("Disabling pch HDMI %x on pipe %d\n", reg, pipe); I915_WRITE(reg, val & ~PORT_ENABLE); @@ -1392,12 +1439,13 @@ static void intel_disable_pch_ports(struct drm_i915_private *dev_priv, reg = PCH_ADPA; val = I915_READ(reg); - if (ADPA_PIPE_ENABLED(val, pipe)) + if (adpa_pipe_enabled(dev_priv, val, pipe)) I915_WRITE(reg, val & ~ADPA_DAC_ENABLE); reg = PCH_LVDS; val = I915_READ(reg); - if (LVDS_PIPE_ENABLED(val, pipe)) { + if (lvds_pipe_enabled(dev_priv, val, pipe)) { + DRM_DEBUG_KMS("disable lvds on pipe %d val 0x%08x\n", pipe, val); I915_WRITE(reg, val & ~LVDS_PORT_EN); POSTING_READ(reg); udelay(100);