From: Bill Pemberton Date: Fri, 27 Mar 2009 15:30:18 +0000 (-0400) Subject: Staging: comedi: remove C99 comments in adl_pci6208.c X-Git-Tag: v2.6.31-rc1~105^2~299 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=14458b19e51d434990d9a8c110ddeefd09678e64;p=~emulex%2Finfiniband.git Staging: comedi: remove C99 comments in adl_pci6208.c Signed-off-by: Bill Pemberton Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/adl_pci6208.c b/drivers/staging/comedi/drivers/adl_pci6208.c index f710f551820..7e27f92a9e6 100644 --- a/drivers/staging/comedi/drivers/adl_pci6208.c +++ b/drivers/staging/comedi/drivers/adl_pci6208.c @@ -61,35 +61,35 @@ struct pci6208_board { const char *name; unsigned short dev_id; /* `lspci` will show you this */ int ao_chans; - //int ao_bits; + /* int ao_bits; */ }; static const struct pci6208_board pci6208_boards[] = { /*{ name : "pci6208v", - dev_id : 0x6208, //not sure + dev_id : 0x6208, // not sure ao_chans: 8 - //, ao_bits : 16 + // , ao_bits : 16 }, { name : "pci6216v", - dev_id : 0x6208, //not sure + dev_id : 0x6208, // not sure ao_chans: 16 - //, ao_bits : 16 + // , ao_bits : 16 }, */ { name: "pci6208a", dev_id: 0x6208, ao_chans:8 - //, ao_bits : 16 + /* , ao_bits : 16 */ } }; /* This is used by modprobe to translate PCI IDs to drivers. Should * only be used for PCI and ISA-PnP devices */ static DEFINE_PCI_DEVICE_TABLE(pci6208_pci_table) = { - //{ PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - //{ PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, + /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */ + /* { PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, */ {PCI_VENDOR_ID_ADLINK, 0x6208, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, {0} }; @@ -132,10 +132,10 @@ static int pci6208_ao_winsn(struct comedi_device * dev, struct comedi_subdevice struct comedi_insn * insn, unsigned int * data); static int pci6208_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * s, struct comedi_insn * insn, unsigned int * data); -//static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, -// struct comedi_insn *insn,unsigned int *data); -//static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, -// struct comedi_insn *insn,unsigned int *data); +/* static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, */ +/* struct comedi_insn *insn,unsigned int *data); */ +/* static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, */ +/* struct comedi_insn *insn,unsigned int *data); */ /* * Attach is called by the Comedi core to configure the driver @@ -176,22 +176,22 @@ static int pci6208_attach(struct comedi_device * dev, struct comedi_devconfig * s = dev->subdevices + 0; /* analog output subdevice */ s->type = COMEDI_SUBD_AO; - s->subdev_flags = SDF_WRITABLE; //anything else to add here?? + s->subdev_flags = SDF_WRITABLE; /* anything else to add here?? */ s->n_chan = thisboard->ao_chans; - s->maxdata = 0xffff; //16-bit DAC - s->range_table = &range_bipolar10; //this needs to be checked. + s->maxdata = 0xffff; /* 16-bit DAC */ + s->range_table = &range_bipolar10; /* this needs to be checked. */ s->insn_write = pci6208_ao_winsn; s->insn_read = pci6208_ao_rinsn; - //s=dev->subdevices+1; + /* s=dev->subdevices+1; */ /* digital i/o subdevice */ - //s->type=COMEDI_SUBD_DIO; - //s->subdev_flags=SDF_READABLE|SDF_WRITABLE; - //s->n_chan=16; - //s->maxdata=1; - //s->range_table=&range_digital; - //s->insn_bits = pci6208_dio_insn_bits; - //s->insn_config = pci6208_dio_insn_config; + /* s->type=COMEDI_SUBD_DIO; */ + /* s->subdev_flags=SDF_READABLE|SDF_WRITABLE; */ + /* s->n_chan=16; */ + /* s->maxdata=1; */ + /* s->range_table=&range_digital; */ + /* s->insn_bits = pci6208_dio_insn_bits; */ + /* s->insn_config = pci6208_dio_insn_config; */ printk("attached\n"); @@ -262,49 +262,49 @@ static int pci6208_ao_rinsn(struct comedi_device * dev, struct comedi_subdevice * useful to applications if you implement the insn_bits interface. * This allows packed reading/writing of the DIO channels. The * comedi core can convert between insn_bits and insn_read/write */ -//static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, -// struct comedi_insn *insn,unsigned int *data) -//{ -// if(insn->n!=2)return -EINVAL; +/* static int pci6208_dio_insn_bits(struct comedi_device *dev,struct comedi_subdevice *s, */ +/* struct comedi_insn *insn,unsigned int *data) */ +/* { */ +/* if(insn->n!=2)return -EINVAL; */ /* The insn data is a mask in data[0] and the new data * in data[1], each channel cooresponding to a bit. */ -// if(data[0]){ -// s->state &= ~data[0]; -// s->state |= data[0]&data[1]; +/* if(data[0]){ */ +/* s->state &= ~data[0]; */ +/* s->state |= data[0]&data[1]; */ /* Write out the new digital output lines */ - //outw(s->state,dev->iobase + SKEL_DIO); -// } + /* outw(s->state,dev->iobase + SKEL_DIO); */ +/* } */ /* on return, data[1] contains the value of the digital * input and output lines. */ - //data[1]=inw(dev->iobase + SKEL_DIO); + /* data[1]=inw(dev->iobase + SKEL_DIO); */ /* or we could just return the software copy of the output values if * it was a purely digital output subdevice */ - //data[1]=s->state; + /* data[1]=s->state; */ -// return 2; -//} +/* return 2; */ +/* } */ -//static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, -// struct comedi_insn *insn,unsigned int *data) -//{ -// int chan=CR_CHAN(insn->chanspec); +/* static int pci6208_dio_insn_config(struct comedi_device *dev,struct comedi_subdevice *s, */ +/* struct comedi_insn *insn,unsigned int *data) */ +/* { */ +/* int chan=CR_CHAN(insn->chanspec); */ /* The input or output configuration of each digital line is * configured by a special insn_config instruction. chanspec * contains the channel to be changed, and data[0] contains the * value COMEDI_INPUT or COMEDI_OUTPUT. */ -// if(data[0]==COMEDI_OUTPUT){ -// s->io_bits |= 1<io_bits &= ~(1<io_bits,dev->iobase + SKEL_DIO_CONFIG); +/* if(data[0]==COMEDI_OUTPUT){ */ +/* s->io_bits |= 1<io_bits &= ~(1<io_bits,dev->iobase + SKEL_DIO_CONFIG); */ -// return 1; -//} +/* return 1; */ +/* } */ static int pci6208_find_device(struct comedi_device * dev, int bus, int slot) { @@ -317,9 +317,9 @@ static int pci6208_find_device(struct comedi_device * dev, int bus, int slot) if (pci_dev->vendor == PCI_VENDOR_ID_ADLINK) { for (i = 0; i < pci6208_board_nbr; i++) { if (pci6208_boards[i].dev_id == pci_dev->device) { - // was a particular bus/slot requested? + /* was a particular bus/slot requested? */ if ((bus != 0) || (slot != 0)) { - // are we on the wrong bus/slot? + /* are we on the wrong bus/slot? */ if (pci_dev->bus->number != bus || PCI_SLOT(pci_dev->devfn) @@ -346,10 +346,10 @@ static int pci6208_find_device(struct comedi_device * dev, int bus, int slot) PCI_SLOT(pci_dev->devfn), PCI_FUNC(pci_dev->devfn), pci_dev->irq); - // TODO: Warn about non-tested boards. - //switch(board->device_id) - //{ - //}; + /* TODO: Warn about non-tested boards. */ + /* switch(board->device_id) */ + /* { */ + /* }; */ devpriv->pci_dev = pci_dev; @@ -362,19 +362,19 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr, { unsigned long io_base, io_range, lcr_io_base, lcr_io_range; - // Enable PCI device and request regions + /* Enable PCI device and request regions */ if (comedi_pci_enable(pci_dev, PCI6208_DRIVER_NAME) < 0) { printk("comedi%d: Failed to enable PCI device and request regions\n", dev_minor); return -EIO; } - // Read local configuration register base address [PCI_BASE_ADDRESS #1]. + /* Read local configuration register base address [PCI_BASE_ADDRESS #1]. */ lcr_io_base = pci_resource_start(pci_dev, 1); lcr_io_range = pci_resource_len(pci_dev, 1); printk("comedi%d: local config registers at address 0x%4lx [0x%4lx]\n", dev_minor, lcr_io_base, lcr_io_range); - // Read PCI6208 register base address [PCI_BASE_ADDRESS #2]. + /* Read PCI6208 register base address [PCI_BASE_ADDRESS #2]. */ io_base = pci_resource_start(pci_dev, 2); io_range = pci_resource_end(pci_dev, 2) - io_base + 1; @@ -382,10 +382,10 @@ pci6208_pci_setup(struct pci_dev *pci_dev, unsigned long *io_base_ptr, dev_minor, io_base, io_range); *io_base_ptr = io_base; - //devpriv->io_range = io_range; - //devpriv->is_valid=0; - //devpriv->lcr_io_base=lcr_io_base; - //devpriv->lcr_io_range=lcr_io_range; + /* devpriv->io_range = io_range; */ + /* devpriv->is_valid=0; */ + /* devpriv->lcr_io_base=lcr_io_base; */ + /* devpriv->lcr_io_range=lcr_io_range; */ return 0; }