From: Uwe Kleine-König Date: Thu, 7 Apr 2011 09:13:25 +0000 (+0200) Subject: ARM: remove support for mxc91231 X-Git-Tag: v3.0-rc1~328^2^2~2^2~8 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=13cf8df97d075cf61445c689a30c8b0ce70b415f;p=~emulex%2Finfiniband.git ARM: remove support for mxc91231 Since support for mxc91231 was introduced 2009 it only saw patches that were part of (mxc or arm) global cleanups. The only supported machine only had 4 devices (2x UART, sdhc, watchdog). Cc: Dmitriy Taychenachev LAKML-Reference: 1302211482-17926-1-git-send-email-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König Signed-off-by: Sascha Hauer --- diff --git a/arch/arm/Makefile b/arch/arm/Makefile index c7d321a3d95..80d178878f6 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -160,7 +160,6 @@ machine-$(CONFIG_ARCH_MX2) := imx machine-$(CONFIG_ARCH_MX25) := imx machine-$(CONFIG_ARCH_MX3) := mx3 machine-$(CONFIG_ARCH_MX5) := mx5 -machine-$(CONFIG_ARCH_MXC91231) := mxc91231 machine-$(CONFIG_ARCH_MXS) := mxs machine-$(CONFIG_ARCH_NETX) := netx machine-$(CONFIG_ARCH_NOMADIK) := nomadik diff --git a/arch/arm/mach-mxc91231/Kconfig b/arch/arm/mach-mxc91231/Kconfig deleted file mode 100644 index 8e5fa38ebb6..00000000000 --- a/arch/arm/mach-mxc91231/Kconfig +++ /dev/null @@ -1,11 +0,0 @@ -if ARCH_MXC91231 - -comment "MXC91231 platforms:" - -config MACH_MAGX_ZN5 - bool "Support Motorola Zn5 GSM phone" - default n - help - Include support for Motorola Zn5 GSM phone. - -endif diff --git a/arch/arm/mach-mxc91231/Makefile b/arch/arm/mach-mxc91231/Makefile deleted file mode 100644 index 011d5e19712..00000000000 --- a/arch/arm/mach-mxc91231/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -obj-y := mm.o clock.o devices.o system.o iomux.o -obj-$(CONFIG_MACH_MAGX_ZN5) += magx-zn5.o diff --git a/arch/arm/mach-mxc91231/Makefile.boot b/arch/arm/mach-mxc91231/Makefile.boot deleted file mode 100644 index 9939a19d99a..00000000000 --- a/arch/arm/mach-mxc91231/Makefile.boot +++ /dev/null @@ -1,3 +0,0 @@ - zreladdr-y := 0x90008000 -params_phys-y := 0x90000100 -initrd_phys-y := 0x90800000 diff --git a/arch/arm/mach-mxc91231/clock.c b/arch/arm/mach-mxc91231/clock.c deleted file mode 100644 index 9fab505f1eb..00000000000 --- a/arch/arm/mach-mxc91231/clock.c +++ /dev/null @@ -1,640 +0,0 @@ -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include "crm_regs.h" - -#define CRM_SMALL_DIVIDER(base, name) \ - crm_small_divider(base, \ - base ## _ ## name ## _OFFSET, \ - base ## _ ## name ## _MASK) -#define CRM_1DIVIDER(base, name) \ - crm_divider(base, \ - base ## _ ## name ## _OFFSET, \ - base ## _ ## name ## _MASK, 1) -#define CRM_16DIVIDER(base, name) \ - crm_divider(base, \ - base ## _ ## name ## _OFFSET, \ - base ## _ ## name ## _MASK, 16) - -static u32 crm_small_divider(void __iomem *reg, u8 offset, u32 mask) -{ - static const u32 crm_small_dividers[] = { - 2, 3, 4, 5, 6, 8, 10, 12 - }; - u8 idx; - - idx = (__raw_readl(reg) & mask) >> offset; - if (idx > 7) - return 1; - - return crm_small_dividers[idx]; -} - -static u32 crm_divider(void __iomem *reg, u8 offset, u32 mask, u32 z) -{ - u32 div; - div = (__raw_readl(reg) & mask) >> offset; - return div ? div : z; -} - -static int _clk_1bit_enable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg |= 1 << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - - return 0; -} - -static void _clk_1bit_disable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(1 << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); -} - -static int _clk_3bit_enable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg |= 0x7 << clk->enable_shift; - __raw_writel(reg, clk->enable_reg); - - return 0; -} - -static void _clk_3bit_disable(struct clk *clk) -{ - u32 reg; - - reg = __raw_readl(clk->enable_reg); - reg &= ~(0x7 << clk->enable_shift); - __raw_writel(reg, clk->enable_reg); -} - -static unsigned long ckih_rate; - -static unsigned long clk_ckih_get_rate(struct clk *clk) -{ - return ckih_rate; -} - -static struct clk ckih_clk = { - .get_rate = clk_ckih_get_rate, -}; - -static unsigned long clk_ckih_x2_get_rate(struct clk *clk) -{ - return 2 * clk_get_rate(clk->parent); -} - -static struct clk ckih_x2_clk = { - .parent = &ckih_clk, - .get_rate = clk_ckih_x2_get_rate, -}; - -static unsigned long clk_ckil_get_rate(struct clk *clk) -{ - return CKIL_CLK_FREQ; -} - -static struct clk ckil_clk = { - .get_rate = clk_ckil_get_rate, -}; - -/* plls stuff */ -static struct clk mcu_pll_clk; -static struct clk dsp_pll_clk; -static struct clk usb_pll_clk; - -static struct clk *pll_clk(u8 sel) -{ - switch (sel) { - case 0: - return &mcu_pll_clk; - case 1: - return &dsp_pll_clk; - case 2: - return &usb_pll_clk; - } - BUG(); -} - -static void __iomem *pll_base(struct clk *clk) -{ - if (clk == &mcu_pll_clk) - return MXC_PLL0_BASE; - else if (clk == &dsp_pll_clk) - return MXC_PLL1_BASE; - else if (clk == &usb_pll_clk) - return MXC_PLL2_BASE; - BUG(); -} - -static unsigned long clk_pll_get_rate(struct clk *clk) -{ - const void __iomem *pllbase; - unsigned long dp_op, dp_mfd, dp_mfn, pll_hfsm, ref_clk, mfi; - long mfn, mfn_abs, mfd, pdf; - s64 temp; - pllbase = pll_base(clk); - - pll_hfsm = __raw_readl(pllbase + MXC_PLL_DP_CTL) & MXC_PLL_DP_CTL_HFSM; - if (pll_hfsm == 0) { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN); - } else { - dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP); - dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD); - dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN); - } - - pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK; - mfi = (dp_op >> MXC_PLL_DP_OP_MFI_OFFSET) & MXC_PLL_DP_OP_PDF_MASK; - mfi = (mfi <= 5) ? 5 : mfi; - mfd = dp_mfd & MXC_PLL_DP_MFD_MASK; - mfn = dp_mfn & MXC_PLL_DP_MFN_MASK; - mfn = (mfn <= 0x4000000) ? mfn : (mfn - 0x10000000); - - if (mfn < 0) - mfn_abs = -mfn; - else - mfn_abs = mfn; - -/* XXX: actually this asumes that ckih is fed to pll, but spec says - * that ckih_x2 is also possible. need to check this out. - */ - ref_clk = clk_get_rate(&ckih_clk); - - ref_clk *= 2; - ref_clk /= pdf + 1; - - temp = (u64) ref_clk * mfn_abs; - do_div(temp, mfd); - if (mfn < 0) - temp = -temp; - temp += ref_clk * mfi; - - return temp; -} - -static int clk_pll_enable(struct clk *clk) -{ - void __iomem *ctl; - u32 reg; - - ctl = pll_base(clk); - reg = __raw_readl(ctl); - reg |= (MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN); - __raw_writel(reg, ctl); - do { - reg = __raw_readl(ctl); - } while ((reg & MXC_PLL_DP_CTL_LRF) != MXC_PLL_DP_CTL_LRF); - return 0; -} - -static void clk_pll_disable(struct clk *clk) -{ - void __iomem *ctl; - u32 reg; - - ctl = pll_base(clk); - reg = __raw_readl(ctl); - reg &= ~(MXC_PLL_DP_CTL_RST | MXC_PLL_DP_CTL_UPEN); - __raw_writel(reg, ctl); -} - -static struct clk mcu_pll_clk = { - .parent = &ckih_clk, - .get_rate = clk_pll_get_rate, - .enable = clk_pll_enable, - .disable = clk_pll_disable, -}; - -static struct clk dsp_pll_clk = { - .parent = &ckih_clk, - .get_rate = clk_pll_get_rate, - .enable = clk_pll_enable, - .disable = clk_pll_disable, -}; - -static struct clk usb_pll_clk = { - .parent = &ckih_clk, - .get_rate = clk_pll_get_rate, - .enable = clk_pll_enable, - .disable = clk_pll_disable, -}; -/* plls stuff end */ - -/* ap_ref_clk stuff */ -static struct clk ap_ref_clk; - -static unsigned long clk_ap_ref_get_rate(struct clk *clk) -{ - u32 ascsr, acsr; - u8 ap_pat_ref_div_2, ap_isel, acs, ads; - - ascsr = __raw_readl(MXC_CRMAP_ASCSR); - acsr = __raw_readl(MXC_CRMAP_ACSR); - - /* 0 for ckih, 1 for ckih*2 */ - ap_isel = ascsr & MXC_CRMAP_ASCSR_APISEL; - /* reg divider */ - ap_pat_ref_div_2 = (ascsr >> MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET) & 0x1; - /* undocumented, 1 for disabling divider */ - ads = (acsr >> MXC_CRMAP_ACSR_ADS_OFFSET) & 0x1; - /* 0 for pat_ref, 1 for divider out */ - acs = acsr & MXC_CRMAP_ACSR_ACS; - - if (acs & !ads) - /* use divided clock */ - return clk_get_rate(clk->parent) / (ap_pat_ref_div_2 ? 2 : 1); - - return clk_get_rate(clk->parent) * (ap_isel ? 2 : 1); -} - -static struct clk ap_ref_clk = { - .parent = &ckih_clk, - .get_rate = clk_ap_ref_get_rate, -}; -/* ap_ref_clk stuff end */ - -/* ap_pre_dfs_clk stuff */ -static struct clk ap_pre_dfs_clk; - -static unsigned long clk_ap_pre_dfs_get_rate(struct clk *clk) -{ - u32 acsr, ascsr; - - acsr = __raw_readl(MXC_CRMAP_ACSR); - ascsr = __raw_readl(MXC_CRMAP_ASCSR); - - if (acsr & MXC_CRMAP_ACSR_ACS) { - u8 sel; - sel = (ascsr & MXC_CRMAP_ASCSR_APSEL_MASK) >> - MXC_CRMAP_ASCSR_APSEL_OFFSET; - return clk_get_rate(pll_clk(sel)) / - CRM_SMALL_DIVIDER(MXC_CRMAP_ACDR, ARMDIV); - } - return clk_get_rate(&ap_ref_clk); -} - -static struct clk ap_pre_dfs_clk = { - .get_rate = clk_ap_pre_dfs_get_rate, -}; -/* ap_pre_dfs_clk stuff end */ - -/* usb_clk stuff */ -static struct clk usb_clk; - -static struct clk *clk_usb_parent(struct clk *clk) -{ - u32 acsr, ascsr; - - acsr = __raw_readl(MXC_CRMAP_ACSR); - ascsr = __raw_readl(MXC_CRMAP_ASCSR); - - if (acsr & MXC_CRMAP_ACSR_ACS) { - u8 sel; - sel = (ascsr & MXC_CRMAP_ASCSR_USBSEL_MASK) >> - MXC_CRMAP_ASCSR_USBSEL_OFFSET; - return pll_clk(sel); - } - return &ap_ref_clk; -} - -static unsigned long clk_usb_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / - CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, USBDIV); -} - -static struct clk usb_clk = { - .enable_reg = MXC_CRMAP_ACDER2, - .enable_shift = MXC_CRMAP_ACDER2_USBEN_OFFSET, - .get_rate = clk_usb_get_rate, - .enable = _clk_1bit_enable, - .disable = _clk_1bit_disable, -}; -/* usb_clk stuff end */ - -static unsigned long clk_ipg_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / CRM_16DIVIDER(MXC_CRMAP_ACDR, IPDIV); -} - -static unsigned long clk_ahb_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / - CRM_16DIVIDER(MXC_CRMAP_ACDR, AHBDIV); -} - -static struct clk ipg_clk = { - .parent = &ap_pre_dfs_clk, - .get_rate = clk_ipg_get_rate, -}; - -static struct clk ahb_clk = { - .parent = &ap_pre_dfs_clk, - .get_rate = clk_ahb_get_rate, -}; - -/* perclk_clk stuff */ -static struct clk perclk_clk; - -static unsigned long clk_perclk_get_rate(struct clk *clk) -{ - u32 acder2; - - acder2 = __raw_readl(MXC_CRMAP_ACDER2); - if (acder2 & MXC_CRMAP_ACDER2_BAUD_ISEL_MASK) - return 2 * clk_get_rate(clk->parent); - - return clk_get_rate(clk->parent); -} - -static struct clk perclk_clk = { - .parent = &ckih_clk, - .get_rate = clk_perclk_get_rate, -}; -/* perclk_clk stuff end */ - -/* uart_clk stuff */ -static struct clk uart_clk[]; - -static unsigned long clk_uart_get_rate(struct clk *clk) -{ - u32 div; - - switch (clk->id) { - case 0: - case 1: - div = CRM_SMALL_DIVIDER(MXC_CRMAP_ACDER2, BAUDDIV); - break; - case 2: - div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRA, UART3DIV); - break; - default: - BUG(); - } - return clk_get_rate(clk->parent) / div; -} - -static struct clk uart_clk[] = { - { - .id = 0, - .parent = &perclk_clk, - .enable_reg = MXC_CRMAP_APRA, - .enable_shift = MXC_CRMAP_APRA_UART1EN_OFFSET, - .get_rate = clk_uart_get_rate, - .enable = _clk_1bit_enable, - .disable = _clk_1bit_disable, - }, { - .id = 1, - .parent = &perclk_clk, - .enable_reg = MXC_CRMAP_APRA, - .enable_shift = MXC_CRMAP_APRA_UART2EN_OFFSET, - .get_rate = clk_uart_get_rate, - .enable = _clk_1bit_enable, - .disable = _clk_1bit_disable, - }, { - .id = 2, - .parent = &perclk_clk, - .enable_reg = MXC_CRMAP_APRA, - .enable_shift = MXC_CRMAP_APRA_UART3EN_OFFSET, - .get_rate = clk_uart_get_rate, - .enable = _clk_1bit_enable, - .disable = _clk_1bit_disable, - }, -}; -/* uart_clk stuff end */ - -/* sdhc_clk stuff */ -static struct clk nfc_clk; - -static unsigned long clk_nfc_get_rate(struct clk *clk) -{ - return clk_get_rate(clk->parent) / - CRM_1DIVIDER(MXC_CRMAP_ACDER2, NFCDIV); -} - -static struct clk nfc_clk = { - .parent = &ahb_clk, - .enable_reg = MXC_CRMAP_ACDER2, - .enable_shift = MXC_CRMAP_ACDER2_NFCEN_OFFSET, - .get_rate = clk_nfc_get_rate, - .enable = _clk_1bit_enable, - .disable = _clk_1bit_disable, -}; -/* sdhc_clk stuff end */ - -/* sdhc_clk stuff */ -static struct clk sdhc_clk[]; - -static struct clk *clk_sdhc_parent(struct clk *clk) -{ - u32 aprb; - u8 sel; - u32 mask; - int offset; - - aprb = __raw_readl(MXC_CRMAP_APRB); - - switch (clk->id) { - case 0: - mask = MXC_CRMAP_APRB_SDHC1_ISEL_MASK; - offset = MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET; - break; - case 1: - mask = MXC_CRMAP_APRB_SDHC2_ISEL_MASK; - offset = MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET; - break; - default: - BUG(); - } - sel = (aprb & mask) >> offset; - - switch (sel) { - case 0: - return &ckih_clk; - case 1: - return &ckih_x2_clk; - } - return &usb_clk; -} - -static unsigned long clk_sdhc_get_rate(struct clk *clk) -{ - u32 div; - - switch (clk->id) { - case 0: - div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC1_DIV); - break; - case 1: - div = CRM_SMALL_DIVIDER(MXC_CRMAP_APRB, SDHC2_DIV); - break; - default: - BUG(); - } - - return clk_get_rate(clk->parent) / div; -} - -static int clk_sdhc_enable(struct clk *clk) -{ - u32 amlpmre1, aprb; - - amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1); - aprb = __raw_readl(MXC_CRMAP_APRB); - switch (clk->id) { - case 0: - amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET); - aprb |= (0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET); - break; - case 1: - amlpmre1 |= (0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET); - aprb |= (0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET); - break; - } - __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1); - __raw_writel(aprb, MXC_CRMAP_APRB); - return 0; -} - -static void clk_sdhc_disable(struct clk *clk) -{ - u32 amlpmre1, aprb; - - amlpmre1 = __raw_readl(MXC_CRMAP_AMLPMRE1); - aprb = __raw_readl(MXC_CRMAP_APRB); - switch (clk->id) { - case 0: - amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET); - aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC1EN_OFFSET); - break; - case 1: - amlpmre1 &= ~(0x7 << MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET); - aprb &= ~(0x1 << MXC_CRMAP_APRB_SDHC2EN_OFFSET); - break; - } - __raw_writel(amlpmre1, MXC_CRMAP_AMLPMRE1); - __raw_writel(aprb, MXC_CRMAP_APRB); -} - -static struct clk sdhc_clk[] = { - { - .id = 0, - .get_rate = clk_sdhc_get_rate, - .enable = clk_sdhc_enable, - .disable = clk_sdhc_disable, - }, { - .id = 1, - .get_rate = clk_sdhc_get_rate, - .enable = clk_sdhc_enable, - .disable = clk_sdhc_disable, - }, -}; -/* sdhc_clk stuff end */ - -/* wdog_clk stuff */ -static struct clk wdog_clk[] = { - { - .id = 0, - .parent = &ipg_clk, - .enable_reg = MXC_CRMAP_AMLPMRD, - .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET, - .enable = _clk_3bit_enable, - .disable = _clk_3bit_disable, - }, { - .id = 1, - .parent = &ipg_clk, - .enable_reg = MXC_CRMAP_AMLPMRD, - .enable_shift = MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET, - .enable = _clk_3bit_enable, - .disable = _clk_3bit_disable, - }, -}; -/* wdog_clk stuff end */ - -/* gpt_clk stuff */ -static struct clk gpt_clk = { - .parent = &ipg_clk, - .enable_reg = MXC_CRMAP_AMLPMRC, - .enable_shift = MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET, - .enable = _clk_3bit_enable, - .disable = _clk_3bit_disable, -}; -/* gpt_clk stuff end */ - -/* cspi_clk stuff */ -static struct clk cspi_clk[] = { - { - .id = 0, - .parent = &ipg_clk, - .enable_reg = MXC_CRMAP_AMLPMRE2, - .enable_shift = MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET, - .enable = _clk_3bit_enable, - .disable = _clk_3bit_disable, - }, { - .id = 1, - .parent = &ipg_clk, - .enable_reg = MXC_CRMAP_AMLPMRE1, - .enable_shift = MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET, - .enable = _clk_3bit_enable, - .disable = _clk_3bit_disable, - }, -}; -/* cspi_clk stuff end */ - -#define _REGISTER_CLOCK(d, n, c) \ - { \ - .dev_id = d, \ - .con_id = n, \ - .clk = &c, \ - }, - -static struct clk_lookup lookups[] = { - _REGISTER_CLOCK("imx-uart.0", NULL, uart_clk[0]) - _REGISTER_CLOCK("imx-uart.1", NULL, uart_clk[1]) - _REGISTER_CLOCK("imx-uart.2", NULL, uart_clk[2]) - _REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc_clk[0]) - _REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc_clk[1]) - _REGISTER_CLOCK("mxc-wdt.0", NULL, wdog_clk[0]) - _REGISTER_CLOCK("spi_imx.0", NULL, cspi_clk[0]) - _REGISTER_CLOCK("spi_imx.1", NULL, cspi_clk[1]) -}; - -int __init mxc91231_clocks_init(unsigned long fref) -{ - void __iomem *gpt_base; - - ckih_rate = fref; - - usb_clk.parent = clk_usb_parent(&usb_clk); - sdhc_clk[0].parent = clk_sdhc_parent(&sdhc_clk[0]); - sdhc_clk[1].parent = clk_sdhc_parent(&sdhc_clk[1]); - - clkdev_add_table(lookups, ARRAY_SIZE(lookups)); - - gpt_base = MXC91231_IO_ADDRESS(MXC91231_GPT1_BASE_ADDR); - mxc_timer_init(&gpt_clk, gpt_base, MXC91231_INT_GPT); - - return 0; -} diff --git a/arch/arm/mach-mxc91231/crm_regs.h b/arch/arm/mach-mxc91231/crm_regs.h deleted file mode 100644 index b989baccd67..00000000000 --- a/arch/arm/mach-mxc91231/crm_regs.h +++ /dev/null @@ -1,394 +0,0 @@ -/* - * Copyright 2006 Freescale Semiconductor, Inc. - * Copyright 2006-2007 Motorola, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ -#define _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ - -#define CKIL_CLK_FREQ 32768 - -#define MXC_CRM_AP_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_AP_BASE_ADDR) -#define MXC_CRM_COM_BASE MXC91231_IO_ADDRESS(MXC91231_CRM_COM_BASE_ADDR) -#define MXC_DSM_BASE MXC91231_IO_ADDRESS(MXC91231_DSM_BASE_ADDR) -#define MXC_PLL0_BASE MXC91231_IO_ADDRESS(MXC91231_PLL0_BASE_ADDR) -#define MXC_PLL1_BASE MXC91231_IO_ADDRESS(MXC91231_PLL1_BASE_ADDR) -#define MXC_PLL2_BASE MXC91231_IO_ADDRESS(MXC91231_PLL2_BASE_ADDR) -#define MXC_CLKCTL_BASE MXC91231_IO_ADDRESS(MXC91231_CLKCTL_BASE_ADDR) - -/* PLL Register Offsets */ -#define MXC_PLL_DP_CTL 0x00 -#define MXC_PLL_DP_CONFIG 0x04 -#define MXC_PLL_DP_OP 0x08 -#define MXC_PLL_DP_MFD 0x0C -#define MXC_PLL_DP_MFN 0x10 -#define MXC_PLL_DP_HFS_OP 0x1C -#define MXC_PLL_DP_HFS_MFD 0x20 -#define MXC_PLL_DP_HFS_MFN 0x24 - -/* PLL Register Bit definitions */ -#define MXC_PLL_DP_CTL_DPDCK0_2_EN 0x1000 -#define MXC_PLL_DP_CTL_ADE 0x800 -#define MXC_PLL_DP_CTL_REF_CLK_DIV 0x400 -#define MXC_PLL_DP_CTL_HFSM 0x80 -#define MXC_PLL_DP_CTL_PRE 0x40 -#define MXC_PLL_DP_CTL_UPEN 0x20 -#define MXC_PLL_DP_CTL_RST 0x10 -#define MXC_PLL_DP_CTL_RCP 0x8 -#define MXC_PLL_DP_CTL_PLM 0x4 -#define MXC_PLL_DP_CTL_BRM0 0x2 -#define MXC_PLL_DP_CTL_LRF 0x1 - -#define MXC_PLL_DP_OP_MFI_OFFSET 4 -#define MXC_PLL_DP_OP_MFI_MASK 0xF -#define MXC_PLL_DP_OP_PDF_OFFSET 0 -#define MXC_PLL_DP_OP_PDF_MASK 0xF - -#define MXC_PLL_DP_MFD_OFFSET 0 -#define MXC_PLL_DP_MFD_MASK 0x7FFFFFF - -#define MXC_PLL_DP_MFN_OFFSET 0 -#define MXC_PLL_DP_MFN_MASK 0x7FFFFFF - -/* CRM AP Register Offsets */ -#define MXC_CRMAP_ASCSR (MXC_CRM_AP_BASE + 0x00) -#define MXC_CRMAP_ACDR (MXC_CRM_AP_BASE + 0x04) -#define MXC_CRMAP_ACDER1 (MXC_CRM_AP_BASE + 0x08) -#define MXC_CRMAP_ACDER2 (MXC_CRM_AP_BASE + 0x0C) -#define MXC_CRMAP_ACGCR (MXC_CRM_AP_BASE + 0x10) -#define MXC_CRMAP_ACCGCR (MXC_CRM_AP_BASE + 0x14) -#define MXC_CRMAP_AMLPMRA (MXC_CRM_AP_BASE + 0x18) -#define MXC_CRMAP_AMLPMRB (MXC_CRM_AP_BASE + 0x1C) -#define MXC_CRMAP_AMLPMRC (MXC_CRM_AP_BASE + 0x20) -#define MXC_CRMAP_AMLPMRD (MXC_CRM_AP_BASE + 0x24) -#define MXC_CRMAP_AMLPMRE1 (MXC_CRM_AP_BASE + 0x28) -#define MXC_CRMAP_AMLPMRE2 (MXC_CRM_AP_BASE + 0x2C) -#define MXC_CRMAP_AMLPMRF (MXC_CRM_AP_BASE + 0x30) -#define MXC_CRMAP_AMLPMRG (MXC_CRM_AP_BASE + 0x34) -#define MXC_CRMAP_APGCR (MXC_CRM_AP_BASE + 0x38) -#define MXC_CRMAP_ACSR (MXC_CRM_AP_BASE + 0x3C) -#define MXC_CRMAP_ADCR (MXC_CRM_AP_BASE + 0x40) -#define MXC_CRMAP_ACR (MXC_CRM_AP_BASE + 0x44) -#define MXC_CRMAP_AMCR (MXC_CRM_AP_BASE + 0x48) -#define MXC_CRMAP_APCR (MXC_CRM_AP_BASE + 0x4C) -#define MXC_CRMAP_AMORA (MXC_CRM_AP_BASE + 0x50) -#define MXC_CRMAP_AMORB (MXC_CRM_AP_BASE + 0x54) -#define MXC_CRMAP_AGPR (MXC_CRM_AP_BASE + 0x58) -#define MXC_CRMAP_APRA (MXC_CRM_AP_BASE + 0x5C) -#define MXC_CRMAP_APRB (MXC_CRM_AP_BASE + 0x60) -#define MXC_CRMAP_APOR (MXC_CRM_AP_BASE + 0x64) -#define MXC_CRMAP_ADFMR (MXC_CRM_AP_BASE + 0x68) - -/* CRM AP Register Bit definitions */ -#define MXC_CRMAP_ASCSR_CRS 0x10000 -#define MXC_CRMAP_ASCSR_AP_PATDIV2_OFFSET 15 -#define MXC_CRMAP_ASCSR_AP_PATREF_DIV2 0x8000 -#define MXC_CRMAP_ASCSR_USBSEL_OFFSET 13 -#define MXC_CRMAP_ASCSR_USBSEL_MASK (0x3 << 13) -#define MXC_CRMAP_ASCSR_CSISEL_OFFSET 11 -#define MXC_CRMAP_ASCSR_CSISEL_MASK (0x3 << 11) -#define MXC_CRMAP_ASCSR_SSI2SEL_OFFSET 7 -#define MXC_CRMAP_ASCSR_SSI2SEL_MASK (0x3 << 7) -#define MXC_CRMAP_ASCSR_SSI1SEL_OFFSET 5 -#define MXC_CRMAP_ASCSR_SSI1SEL_MASK (0x3 << 5) -#define MXC_CRMAP_ASCSR_APSEL_OFFSET 3 -#define MXC_CRMAP_ASCSR_APSEL_MASK (0x3 << 3) -#define MXC_CRMAP_ASCSR_AP_PATDIV1_OFFSET 2 -#define MXC_CRMAP_ASCSR_AP_PATREF_DIV1 0x4 -#define MXC_CRMAP_ASCSR_APISEL 0x1 - -#define MXC_CRMAP_ACDR_ARMDIV_OFFSET 8 -#define MXC_CRMAP_ACDR_ARMDIV_MASK (0xF << 8) -#define MXC_CRMAP_ACDR_AHBDIV_OFFSET 4 -#define MXC_CRMAP_ACDR_AHBDIV_MASK (0xF << 4) -#define MXC_CRMAP_ACDR_IPDIV_OFFSET 0 -#define MXC_CRMAP_ACDR_IPDIV_MASK 0xF - -#define MXC_CRMAP_ACDER1_CSIEN_OFFSET 30 -#define MXC_CRMAP_ACDER1_CSIDIV_OFFSET 24 -#define MXC_CRMAP_ACDER1_CSIDIV_MASK (0x3F << 24) -#define MXC_CRMAP_ACDER1_SSI2EN_OFFSET 14 -#define MXC_CRMAP_ACDER1_SSI2DIV_OFFSET 8 -#define MXC_CRMAP_ACDER1_SSI2DIV_MASK (0x3F << 8) -#define MXC_CRMAP_ACDER1_SSI1EN_OFFSET 6 -#define MXC_CRMAP_ACDER1_SSI1DIV_OFFSET 0 -#define MXC_CRMAP_ACDER1_SSI1DIV_MASK 0x3F - -#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_OFFSET 24 -#define MXC_CRMAP_ACDER2_CRCT_CLK_DIV_MASK (0x7 << 24) -#define MXC_CRMAP_ACDER2_NFCEN_OFFSET 20 -#define MXC_CRMAP_ACDER2_NFCDIV_OFFSET 16 -#define MXC_CRMAP_ACDER2_NFCDIV_MASK (0xF << 16) -#define MXC_CRMAP_ACDER2_USBEN_OFFSET 12 -#define MXC_CRMAP_ACDER2_USBDIV_OFFSET 8 -#define MXC_CRMAP_ACDER2_USBDIV_MASK (0xF << 8) -#define MXC_CRMAP_ACDER2_BAUD_ISEL_OFFSET 5 -#define MXC_CRMAP_ACDER2_BAUD_ISEL_MASK (0x3 << 5) -#define MXC_CRMAP_ACDER2_BAUDDIV_OFFSET 0 -#define MXC_CRMAP_ACDER2_BAUDDIV_MASK 0xF - -#define MXC_CRMAP_AMLPMRA_MLPMA7_OFFSET 22 -#define MXC_CRMAP_AMLPMRA_MLPMA7_MASK (0x7 << 22) -#define MXC_CRMAP_AMLPMRA_MLPMA6_OFFSET 19 -#define MXC_CRMAP_AMLPMRA_MLPMA6_MASK (0x7 << 19) -#define MXC_CRMAP_AMLPMRA_MLPMA4_OFFSET 12 -#define MXC_CRMAP_AMLPMRA_MLPMA4_MASK (0x7 << 12) -#define MXC_CRMAP_AMLPMRA_MLPMA3_OFFSET 9 -#define MXC_CRMAP_AMLPMRA_MLPMA3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRA_MLPMA2_OFFSET 6 -#define MXC_CRMAP_AMLPMRA_MLPMA2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRA_MLPMA1_OFFSET 3 -#define MXC_CRMAP_AMLPMRA_MLPMA1_MASK (0x7 << 3) - -#define MXC_CRMAP_AMLPMRB_MLPMB0_OFFSET 0 -#define MXC_CRMAP_AMLPMRB_MLPMB0_MASK 0x7 - -#define MXC_CRMAP_AMLPMRC_MLPMC9_OFFSET 28 -#define MXC_CRMAP_AMLPMRC_MLPMC9_MASK (0x7 << 28) -#define MXC_CRMAP_AMLPMRC_MLPMC7_OFFSET 22 -#define MXC_CRMAP_AMLPMRC_MLPMC7_MASK (0x7 << 22) -#define MXC_CRMAP_AMLPMRC_MLPMC5_OFFSET 16 -#define MXC_CRMAP_AMLPMRC_MLPMC5_MASK (0x7 << 16) -#define MXC_CRMAP_AMLPMRC_MLPMC4_OFFSET 12 -#define MXC_CRMAP_AMLPMRC_MLPMC4_MASK (0x7 << 12) -#define MXC_CRMAP_AMLPMRC_MLPMC3_OFFSET 9 -#define MXC_CRMAP_AMLPMRC_MLPMC3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRC_MLPMC2_OFFSET 6 -#define MXC_CRMAP_AMLPMRC_MLPMC2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRC_MLPMC1_OFFSET 3 -#define MXC_CRMAP_AMLPMRC_MLPMC1_MASK (0x7 << 3) -#define MXC_CRMAP_AMLPMRC_MLPMC0_OFFSET 0 -#define MXC_CRMAP_AMLPMRC_MLPMC0_MASK 0x7 - -#define MXC_CRMAP_AMLPMRD_MLPMD7_OFFSET 22 -#define MXC_CRMAP_AMLPMRD_MLPMD7_MASK (0x7 << 22) -#define MXC_CRMAP_AMLPMRD_MLPMD4_OFFSET 12 -#define MXC_CRMAP_AMLPMRD_MLPMD4_MASK (0x7 << 12) -#define MXC_CRMAP_AMLPMRD_MLPMD3_OFFSET 9 -#define MXC_CRMAP_AMLPMRD_MLPMD3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRD_MLPMD2_OFFSET 6 -#define MXC_CRMAP_AMLPMRD_MLPMD2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRD_MLPMD0_OFFSET 0 -#define MXC_CRMAP_AMLPMRD_MLPMD0_MASK 0x7 - -#define MXC_CRMAP_AMLPMRE1_MLPME9_OFFSET 28 -#define MXC_CRMAP_AMLPMRE1_MLPME9_MASK (0x7 << 28) -#define MXC_CRMAP_AMLPMRE1_MLPME8_OFFSET 25 -#define MXC_CRMAP_AMLPMRE1_MLPME8_MASK (0x7 << 25) -#define MXC_CRMAP_AMLPMRE1_MLPME7_OFFSET 22 -#define MXC_CRMAP_AMLPMRE1_MLPME7_MASK (0x7 << 22) -#define MXC_CRMAP_AMLPMRE1_MLPME6_OFFSET 19 -#define MXC_CRMAP_AMLPMRE1_MLPME6_MASK (0x7 << 19) -#define MXC_CRMAP_AMLPMRE1_MLPME5_OFFSET 16 -#define MXC_CRMAP_AMLPMRE1_MLPME5_MASK (0x7 << 16) -#define MXC_CRMAP_AMLPMRE1_MLPME4_OFFSET 12 -#define MXC_CRMAP_AMLPMRE1_MLPME4_MASK (0x7 << 12) -#define MXC_CRMAP_AMLPMRE1_MLPME3_OFFSET 9 -#define MXC_CRMAP_AMLPMRE1_MLPME3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRE1_MLPME2_OFFSET 6 -#define MXC_CRMAP_AMLPMRE1_MLPME2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRE1_MLPME1_OFFSET 3 -#define MXC_CRMAP_AMLPMRE1_MLPME1_MASK (0x7 << 3) -#define MXC_CRMAP_AMLPMRE1_MLPME0_OFFSET 0 -#define MXC_CRMAP_AMLPMRE1_MLPME0_MASK 0x7 - -#define MXC_CRMAP_AMLPMRE2_MLPME0_OFFSET 0 -#define MXC_CRMAP_AMLPMRE2_MLPME0_MASK 0x7 - -#define MXC_CRMAP_AMLPMRF_MLPMF6_OFFSET 19 -#define MXC_CRMAP_AMLPMRF_MLPMF6_MASK (0x7 << 19) -#define MXC_CRMAP_AMLPMRF_MLPMF5_OFFSET 16 -#define MXC_CRMAP_AMLPMRF_MLPMF5_MASK (0x7 << 16) -#define MXC_CRMAP_AMLPMRF_MLPMF3_OFFSET 9 -#define MXC_CRMAP_AMLPMRF_MLPMF3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRF_MLPMF2_OFFSET 6 -#define MXC_CRMAP_AMLPMRF_MLPMF2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRF_MLPMF1_OFFSET 3 -#define MXC_CRMAP_AMLPMRF_MLPMF1_MASK (0x7 << 3) -#define MXC_CRMAP_AMLPMRF_MLPMF0_OFFSET 0 -#define MXC_CRMAP_AMLPMRF_MLPMF0_MASK (0x7 << 0) - -#define MXC_CRMAP_AMLPMRG_MLPMG9_OFFSET 28 -#define MXC_CRMAP_AMLPMRG_MLPMG9_MASK (0x7 << 28) -#define MXC_CRMAP_AMLPMRG_MLPMG7_OFFSET 22 -#define MXC_CRMAP_AMLPMRG_MLPMG7_MASK (0x7 << 22) -#define MXC_CRMAP_AMLPMRG_MLPMG6_OFFSET 19 -#define MXC_CRMAP_AMLPMRG_MLPMG6_MASK (0x7 << 19) -#define MXC_CRMAP_AMLPMRG_MLPMG5_OFFSET 16 -#define MXC_CRMAP_AMLPMRG_MLPMG5_MASK (0x7 << 16) -#define MXC_CRMAP_AMLPMRG_MLPMG4_OFFSET 12 -#define MXC_CRMAP_AMLPMRG_MLPMG4_MASK (0x7 << 12) -#define MXC_CRMAP_AMLPMRG_MLPMG3_OFFSET 9 -#define MXC_CRMAP_AMLPMRG_MLPMG3_MASK (0x7 << 9) -#define MXC_CRMAP_AMLPMRG_MLPMG2_OFFSET 6 -#define MXC_CRMAP_AMLPMRG_MLPMG2_MASK (0x7 << 6) -#define MXC_CRMAP_AMLPMRG_MLPMG1_OFFSET 3 -#define MXC_CRMAP_AMLPMRG_MLPMG1_MASK (0x7 << 3) -#define MXC_CRMAP_AMLPMRG_MLPMG0_OFFSET 0 -#define MXC_CRMAP_AMLPMRG_MLPMG0_MASK 0x7 - -#define MXC_CRMAP_AGPR_IPUPAD_OFFSET 20 -#define MXC_CRMAP_AGPR_IPUPAD_MASK (0x7 << 20) - -#define MXC_CRMAP_APRA_EL1TEN_OFFSET 29 -#define MXC_CRMAP_APRA_SIMEN_OFFSET 24 -#define MXC_CRMAP_APRA_UART3DIV_OFFSET 17 -#define MXC_CRMAP_APRA_UART3DIV_MASK (0xF << 17) -#define MXC_CRMAP_APRA_UART3EN_OFFSET 16 -#define MXC_CRMAP_APRA_SAHARA_DIV2_CLKEN_OFFSET 14 -#define MXC_CRMAP_APRA_MQSPIEN_OFFSET 13 -#define MXC_CRMAP_APRA_UART2EN_OFFSET 8 -#define MXC_CRMAP_APRA_UART1EN_OFFSET 0 - -#define MXC_CRMAP_APRB_SDHC2_ISEL_OFFSET 13 -#define MXC_CRMAP_APRB_SDHC2_ISEL_MASK (0x7 << 13) -#define MXC_CRMAP_APRB_SDHC2_DIV_OFFSET 9 -#define MXC_CRMAP_APRB_SDHC2_DIV_MASK (0xF << 9) -#define MXC_CRMAP_APRB_SDHC2EN_OFFSET 8 -#define MXC_CRMAP_APRB_SDHC1_ISEL_OFFSET 5 -#define MXC_CRMAP_APRB_SDHC1_ISEL_MASK (0x7 << 5) -#define MXC_CRMAP_APRB_SDHC1_DIV_OFFSET 1 -#define MXC_CRMAP_APRB_SDHC1_DIV_MASK (0xF << 1) -#define MXC_CRMAP_APRB_SDHC1EN_OFFSET 0 - -#define MXC_CRMAP_ACSR_ADS_OFFSET 8 -#define MXC_CRMAP_ACSR_ADS (0x1 << 8) -#define MXC_CRMAP_ACSR_ACS 0x1 - -#define MXC_CRMAP_ADCR_LFDF_0 (0x0 << 8) -#define MXC_CRMAP_ADCR_LFDF_2 (0x1 << 8) -#define MXC_CRMAP_ADCR_LFDF_4 (0x2 << 8) -#define MXC_CRMAP_ADCR_LFDF_8 (0x3 << 8) -#define MXC_CRMAP_ADCR_LFDF_OFFSET 8 -#define MXC_CRMAP_ADCR_LFDF_MASK (0x3 << 8) -#define MXC_CRMAP_ADCR_ALT_PLL 0x80 -#define MXC_CRMAP_ADCR_DFS_DIVEN 0x20 -#define MXC_CRMAP_ADCR_DIV_BYP 0x2 -#define MXC_CRMAP_ADCR_VSTAT 0x8 -#define MXC_CRMAP_ADCR_TSTAT 0x10 -#define MXC_CRMAP_ADCR_DVFS_VCTRL 0x10 -#define MXC_CRMAP_ADCR_CLK_ON 0x40 - -#define MXC_CRMAP_ADFMR_FC_OFFSET 16 -#define MXC_CRMAP_ADFMR_FC_MASK (0x1F << 16) -#define MXC_CRMAP_ADFMR_MF_OFFSET 1 -#define MXC_CRMAP_ADFMR_MF_MASK (0x3FF << 1) -#define MXC_CRMAP_ADFMR_DFM_CLK_READY 0x1 -#define MXC_CRMAP_ADFMR_DFM_PWR_DOWN 0x8000 - -#define MXC_CRMAP_ACR_CKOHS_HIGH (1 << 18) -#define MXC_CRMAP_ACR_CKOS_HIGH (1 << 16) -#define MXC_CRMAP_ACR_CKOHS_MASK (0x7 << 12) -#define MXC_CRMAP_ACR_CKOHD (1 << 11) -#define MXC_CRMAP_ACR_CKOHDIV_MASK (0xF << 8) -#define MXC_CRMAP_ACR_CKOHDIV_OFFSET 8 -#define MXC_CRMAP_ACR_CKOD (1 << 7) -#define MXC_CRMAP_ACR_CKOS_MASK (0x7 << 4) - -/* AP Warm reset */ -#define MXC_CRMAP_AMCR_SW_AP (1 << 14) - -/* Bit definitions of ACGCR in CRM_AP for tree level clock gating */ -#define MXC_CRMAP_ACGCR_ACG0_STOP_WAIT 0x00000001 -#define MXC_CRMAP_ACGCR_ACG0_STOP 0x00000003 -#define MXC_CRMAP_ACGCR_ACG0_RUN 0x00000007 -#define MXC_CRMAP_ACGCR_ACG0_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG1_STOP_WAIT 0x00000008 -#define MXC_CRMAP_ACGCR_ACG1_STOP 0x00000018 -#define MXC_CRMAP_ACGCR_ACG1_RUN 0x00000038 -#define MXC_CRMAP_ACGCR_ACG1_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG2_STOP_WAIT 0x00000040 -#define MXC_CRMAP_ACGCR_ACG2_STOP 0x000000C0 -#define MXC_CRMAP_ACGCR_ACG2_RUN 0x000001C0 -#define MXC_CRMAP_ACGCR_ACG2_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG3_STOP_WAIT 0x00000200 -#define MXC_CRMAP_ACGCR_ACG3_STOP 0x00000600 -#define MXC_CRMAP_ACGCR_ACG3_RUN 0x00000E00 -#define MXC_CRMAP_ACGCR_ACG3_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG4_STOP_WAIT 0x00001000 -#define MXC_CRMAP_ACGCR_ACG4_STOP 0x00003000 -#define MXC_CRMAP_ACGCR_ACG4_RUN 0x00007000 -#define MXC_CRMAP_ACGCR_ACG4_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG5_STOP_WAIT 0x00010000 -#define MXC_CRMAP_ACGCR_ACG5_STOP 0x00030000 -#define MXC_CRMAP_ACGCR_ACG5_RUN 0x00070000 -#define MXC_CRMAP_ACGCR_ACG5_DISABLED 0x00000000 - -#define MXC_CRMAP_ACGCR_ACG6_STOP_WAIT 0x00080000 -#define MXC_CRMAP_ACGCR_ACG6_STOP 0x00180000 -#define MXC_CRMAP_ACGCR_ACG6_RUN 0x00380000 -#define MXC_CRMAP_ACGCR_ACG6_DISABLED 0x00000000 - -#define NUM_GATE_CTRL 6 - -/* CRM COM Register Offsets */ -#define MXC_CRMCOM_CSCR (MXC_CRM_COM_BASE + 0x0C) -#define MXC_CRMCOM_CCCR (MXC_CRM_COM_BASE + 0x10) - -/* CRM COM Bit Definitions */ -#define MXC_CRMCOM_CSCR_PPD1 0x08000000 -#define MXC_CRMCOM_CSCR_CKOHSEL (1 << 18) -#define MXC_CRMCOM_CSCR_CKOSEL (1 << 17) -#define MXC_CRMCOM_CCCR_CC_DIV_OFFSET 8 -#define MXC_CRMCOM_CCCR_CC_DIV_MASK (0x1F << 8) -#define MXC_CRMCOM_CCCR_CC_SEL_OFFSET 0 -#define MXC_CRMCOM_CCCR_CC_SEL_MASK 0x3 - -/* DSM Register Offsets */ -#define MXC_DSM_SLEEP_TIME (MXC_DSM_BASE + 0x0c) -#define MXC_DSM_CONTROL0 (MXC_DSM_BASE + 0x20) -#define MXC_DSM_CONTROL1 (MXC_DSM_BASE + 0x24) -#define MXC_DSM_CTREN (MXC_DSM_BASE + 0x28) -#define MXC_DSM_WARM_PER (MXC_DSM_BASE + 0x40) -#define MXC_DSM_LOCK_PER (MXC_DSM_BASE + 0x44) -#define MXC_DSM_MGPER (MXC_DSM_BASE + 0x4c) -#define MXC_DSM_CRM_CONTROL (MXC_DSM_BASE + 0x50) - -/* Bit definitions of various registers in DSM */ -#define MXC_DSM_CRM_CTRL_DVFS_BYP 0x00000008 -#define MXC_DSM_CRM_CTRL_DVFS_VCTRL 0x00000004 -#define MXC_DSM_CRM_CTRL_LPMD1 0x00000002 -#define MXC_DSM_CRM_CTRL_LPMD0 0x00000001 -#define MXC_DSM_CRM_CTRL_LPMD_STOP_MODE 0x00000000 -#define MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE 0x00000001 -#define MXC_DSM_CRM_CTRL_LPMD_RUN_MODE 0x00000003 -#define MXC_DSM_CONTROL0_STBY_COMMIT_EN 0x00000200 -#define MXC_DSM_CONTROL0_MSTR_EN 0x00000001 -#define MXC_DSM_CONTROL0_RESTART 0x00000010 -/* Counter Block reset */ -#define MXC_DSM_CONTROL1_CB_RST 0x00000002 -/* State Machine reset */ -#define MXC_DSM_CONTROL1_SM_RST 0x00000004 -/* Bit needed to reset counter block */ -#define MXC_CONTROL1_RST_CNT32 0x00000008 -#define MXC_DSM_CONTROL1_RST_CNT32_EN 0x00000800 -#define MXC_DSM_CONTROL1_SLEEP 0x00000100 -#define MXC_DSM_CONTROL1_WAKEUP_DISABLE 0x00004000 -#define MXC_DSM_CTREN_CNT32 0x00000001 - -/* Magic Fix enable bit */ -#define MXC_DSM_MGPER_EN_MGFX 0x80000000 -#define MXC_DSM_MGPER_PER_MASK 0x000003FF -#define MXC_DSM_MGPER_PER(n) (MXC_DSM_MGPER_PER_MASK & n) - -/* Address offsets of the CLKCTL registers */ -#define MXC_CLKCTL_GP_CTRL (MXC_CLKCTL_BASE + 0x00) -#define MXC_CLKCTL_GP_SER (MXC_CLKCTL_BASE + 0x04) -#define MXC_CLKCTL_GP_CER (MXC_CLKCTL_BASE + 0x08) - -#endif /* _ARCH_ARM_MACH_MXC91231_CRM_REGS_H_ */ diff --git a/arch/arm/mach-mxc91231/devices.c b/arch/arm/mach-mxc91231/devices.c deleted file mode 100644 index 027af4f0d18..00000000000 --- a/arch/arm/mach-mxc91231/devices.c +++ /dev/null @@ -1,251 +0,0 @@ -/* - * Copyright 2006-2007 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright 2008 Sascha Hauer, kernel@pengutronix.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -static struct resource uart0[] = { - { - .start = MXC91231_UART1_BASE_ADDR, - .end = MXC91231_UART1_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_UART1_RX, - .end = MXC91231_INT_UART1_RX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART1_TX, - .end = MXC91231_INT_UART1_TX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART1_MINT, - .end = MXC91231_INT_UART1_MINT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device0 = { - .name = "imx-uart", - .id = 0, - .resource = uart0, - .num_resources = ARRAY_SIZE(uart0), -}; - -static struct resource uart1[] = { - { - .start = MXC91231_UART2_BASE_ADDR, - .end = MXC91231_UART2_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_UART2_RX, - .end = MXC91231_INT_UART2_RX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART2_TX, - .end = MXC91231_INT_UART2_TX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART2_MINT, - .end = MXC91231_INT_UART2_MINT, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_uart_device1 = { - .name = "imx-uart", - .id = 1, - .resource = uart1, - .num_resources = ARRAY_SIZE(uart1), -}; - -static struct resource uart2[] = { - { - .start = MXC91231_UART3_BASE_ADDR, - .end = MXC91231_UART3_BASE_ADDR + 0x0B5, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_UART3_RX, - .end = MXC91231_INT_UART3_RX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART3_TX, - .end = MXC91231_INT_UART3_TX, - .flags = IORESOURCE_IRQ, - }, { - .start = MXC91231_INT_UART3_MINT, - .end = MXC91231_INT_UART3_MINT, - .flags = IORESOURCE_IRQ, - - }, -}; - -struct platform_device mxc_uart_device2 = { - .name = "imx-uart", - .id = 2, - .resource = uart2, - .num_resources = ARRAY_SIZE(uart2), -}; - -/* GPIO port description */ -static struct mxc_gpio_port mxc_gpio_ports[] = { - [0] = { - .chip.label = "gpio-0", - .base = MXC91231_IO_ADDRESS(MXC91231_GPIO1_AP_BASE_ADDR), - .irq = MXC91231_INT_GPIO1, - .virtual_irq_start = MXC_GPIO_IRQ_START, - }, - [1] = { - .chip.label = "gpio-1", - .base = MXC91231_IO_ADDRESS(MXC91231_GPIO2_AP_BASE_ADDR), - .irq = MXC91231_INT_GPIO2, - .virtual_irq_start = MXC_GPIO_IRQ_START + 32, - }, - [2] = { - .chip.label = "gpio-2", - .base = MXC91231_IO_ADDRESS(MXC91231_GPIO3_AP_BASE_ADDR), - .irq = MXC91231_INT_GPIO3, - .virtual_irq_start = MXC_GPIO_IRQ_START + 64, - }, - [3] = { - .chip.label = "gpio-3", - .base = MXC91231_IO_ADDRESS(MXC91231_GPIO4_SH_BASE_ADDR), - .irq = MXC91231_INT_GPIO4, - .virtual_irq_start = MXC_GPIO_IRQ_START + 96, - }, -}; - -int __init mxc91231_register_gpios(void) -{ - return mxc_gpio_init(mxc_gpio_ports, ARRAY_SIZE(mxc_gpio_ports)); -} - -static struct resource mxc_nand_resources[] = { - { - .start = MXC91231_NFC_BASE_ADDR, - .end = MXC91231_NFC_BASE_ADDR + 0xfff, - .flags = IORESOURCE_MEM - }, { - .start = MXC91231_INT_NANDFC, - .end = MXC91231_INT_NANDFC, - .flags = IORESOURCE_IRQ - }, -}; - -struct platform_device mxc_nand_device = { - .name = "mxc_nand", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_nand_resources), - .resource = mxc_nand_resources, -}; - -static struct resource mxc_sdhc0_resources[] = { - { - .start = MXC91231_MMC_SDHC1_BASE_ADDR, - .end = MXC91231_MMC_SDHC1_BASE_ADDR + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_MMC_SDHC1, - .end = MXC91231_INT_MMC_SDHC1, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct resource mxc_sdhc1_resources[] = { - { - .start = MXC91231_MMC_SDHC2_BASE_ADDR, - .end = MXC91231_MMC_SDHC2_BASE_ADDR + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_MMC_SDHC2, - .end = MXC91231_INT_MMC_SDHC2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_sdhc_device0 = { - .name = "mxc-mmc", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_sdhc0_resources), - .resource = mxc_sdhc0_resources, -}; - -struct platform_device mxc_sdhc_device1 = { - .name = "mxc-mmc", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_sdhc1_resources), - .resource = mxc_sdhc1_resources, -}; - -static struct resource mxc_cspi0_resources[] = { - { - .start = MXC91231_CSPI1_BASE_ADDR, - .end = MXC91231_CSPI1_BASE_ADDR + 0x20, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_CSPI1, - .end = MXC91231_INT_CSPI1, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_cspi_device0 = { - .name = "spi_imx", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_cspi0_resources), - .resource = mxc_cspi0_resources, -}; - -static struct resource mxc_cspi1_resources[] = { - { - .start = MXC91231_CSPI2_BASE_ADDR, - .end = MXC91231_CSPI2_BASE_ADDR + 0x20, - .flags = IORESOURCE_MEM, - }, { - .start = MXC91231_INT_CSPI2, - .end = MXC91231_INT_CSPI2, - .flags = IORESOURCE_IRQ, - }, -}; - -struct platform_device mxc_cspi_device1 = { - .name = "spi_imx", - .id = 1, - .num_resources = ARRAY_SIZE(mxc_cspi1_resources), - .resource = mxc_cspi1_resources, -}; - -static struct resource mxc_wdog0_resources[] = { - { - .start = MXC91231_WDOG1_BASE_ADDR, - .end = MXC91231_WDOG1_BASE_ADDR + 0x10, - .flags = IORESOURCE_MEM, - }, -}; - -struct platform_device mxc_wdog_device0 = { - .name = "mxc-wdt", - .id = 0, - .num_resources = ARRAY_SIZE(mxc_wdog0_resources), - .resource = mxc_wdog0_resources, -}; diff --git a/arch/arm/mach-mxc91231/devices.h b/arch/arm/mach-mxc91231/devices.h deleted file mode 100644 index 72a2136ce27..00000000000 --- a/arch/arm/mach-mxc91231/devices.h +++ /dev/null @@ -1,13 +0,0 @@ -extern struct platform_device mxc_uart_device0; -extern struct platform_device mxc_uart_device1; -extern struct platform_device mxc_uart_device2; - -extern struct platform_device mxc_nand_device; - -extern struct platform_device mxc_sdhc_device0; -extern struct platform_device mxc_sdhc_device1; - -extern struct platform_device mxc_cspi_device0; -extern struct platform_device mxc_cspi_device1; - -extern struct platform_device mxc_wdog_device0; diff --git a/arch/arm/mach-mxc91231/iomux.c b/arch/arm/mach-mxc91231/iomux.c deleted file mode 100644 index 66fc41cbf2c..00000000000 --- a/arch/arm/mach-mxc91231/iomux.c +++ /dev/null @@ -1,177 +0,0 @@ -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer - * Copyright (C) 2009 by Valentin Longchamp - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301, USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -/* - * IOMUX register (base) addresses - */ -#define IOMUX_AP_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_AP_BASE_ADDR) -#define IOMUX_COM_BASE MXC91231_IO_ADDRESS(MXC91231_IOMUX_COM_BASE_ADDR) -#define IOMUXSW_AP_MUX_CTL (IOMUX_AP_BASE + 0x000) -#define IOMUXSW_SP_MUX_CTL (IOMUX_COM_BASE + 0x000) -#define IOMUXSW_PAD_CTL (IOMUX_COM_BASE + 0x200) - -#define IOMUXINT_OBS1 (IOMUX_AP_BASE + 0x600) -#define IOMUXINT_OBS2 (IOMUX_AP_BASE + 0x004) - -static DEFINE_SPINLOCK(gpio_mux_lock); - -#define NB_PORTS ((PIN_MAX + 32) / 32) -#define PIN_GLOBAL_NUM(pin) \ - (((pin & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT)*PIN_AP_MAX + \ - ((pin & MUX_REG_MASK) >> MUX_REG_SHIFT)*4 + \ - ((pin & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT)) - -unsigned long mxc_pin_alloc_map[NB_PORTS * 32 / BITS_PER_LONG]; -/* - * set the mode for a IOMUX pin. - */ -int mxc_iomux_mode(unsigned int pin_mode) -{ - u32 side, field, l, mode, ret = 0; - void __iomem *reg; - - side = (pin_mode & MUX_SIDE_MASK) >> MUX_SIDE_SHIFT; - switch (side) { - case MUX_SIDE_AP: - reg = IOMUXSW_AP_MUX_CTL; - break; - case MUX_SIDE_SP: - reg = IOMUXSW_SP_MUX_CTL; - break; - default: - return -EINVAL; - } - reg += ((pin_mode & MUX_REG_MASK) >> MUX_REG_SHIFT) * 4; - field = (pin_mode & MUX_FIELD_MASK) >> MUX_FIELD_SHIFT; - mode = (pin_mode & MUX_MODE_MASK) >> MUX_MODE_SHIFT; - - spin_lock(&gpio_mux_lock); - - l = __raw_readl(reg); - l &= ~(0xff << (field * 8)); - l |= mode << (field * 8); - __raw_writel(l, reg); - - spin_unlock(&gpio_mux_lock); - - return ret; -} -EXPORT_SYMBOL(mxc_iomux_mode); - -/* - * This function configures the pad value for a IOMUX pin. - */ -void mxc_iomux_set_pad(enum iomux_pins pin, u32 config) -{ - u32 padgrp, field, l; - void __iomem *reg; - - padgrp = (pin & MUX_PADGRP_MASK) >> MUX_PADGRP_SHIFT; - reg = IOMUXSW_PAD_CTL + (pin + 2) / 3 * 4; - field = (pin + 2) % 3; - - pr_debug("%s: reg offset = 0x%x, field = %d\n", - __func__, (pin + 2) / 3, field); - - spin_lock(&gpio_mux_lock); - - l = __raw_readl(reg); - l &= ~(0x1ff << (field * 10)); - l |= config << (field * 10); - __raw_writel(l, reg); - - spin_unlock(&gpio_mux_lock); -} -EXPORT_SYMBOL(mxc_iomux_set_pad); - -/* - * allocs a single pin: - * - reserves the pin so that it is not claimed by another driver - * - setups the iomux according to the configuration - */ -int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label) -{ - unsigned pad = PIN_GLOBAL_NUM(pin_mode); - if (pad >= (PIN_MAX + 1)) { - printk(KERN_ERR "mxc_iomux: Attempt to request nonexistant pin %u for \"%s\"\n", - pad, label ? label : "?"); - return -EINVAL; - } - - if (test_and_set_bit(pad, mxc_pin_alloc_map)) { - printk(KERN_ERR "mxc_iomux: pin %u already used. Allocation for \"%s\" failed\n", - pad, label ? label : "?"); - return -EBUSY; - } - mxc_iomux_mode(pin_mode); - - return 0; -} -EXPORT_SYMBOL(mxc_iomux_alloc_pin); - -int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, - const char *label) -{ - const unsigned int *p = pin_list; - int i; - int ret = -EINVAL; - - for (i = 0; i < count; i++) { - ret = mxc_iomux_alloc_pin(*p, label); - if (ret) - goto setup_error; - p++; - } - return 0; - -setup_error: - mxc_iomux_release_multiple_pins(pin_list, i); - return ret; -} -EXPORT_SYMBOL(mxc_iomux_setup_multiple_pins); - -void mxc_iomux_release_pin(unsigned int pin_mode) -{ - unsigned pad = PIN_GLOBAL_NUM(pin_mode); - - if (pad < (PIN_MAX + 1)) - clear_bit(pad, mxc_pin_alloc_map); -} -EXPORT_SYMBOL(mxc_iomux_release_pin); - -void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count) -{ - const unsigned int *p = pin_list; - int i; - - for (i = 0; i < count; i++) { - mxc_iomux_release_pin(*p); - p++; - } -} -EXPORT_SYMBOL(mxc_iomux_release_multiple_pins); diff --git a/arch/arm/mach-mxc91231/magx-zn5.c b/arch/arm/mach-mxc91231/magx-zn5.c deleted file mode 100644 index f31a45e5a0b..00000000000 --- a/arch/arm/mach-mxc91231/magx-zn5.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright 2009 Dmitriy Taychenachev - * - * This file is released under the GPLv2 or later. - */ - -#include -#include -#include - -#include -#include -#include - -#include -#include -#include -#include -#include - -#include "devices.h" - -static struct imxuart_platform_data uart_pdata = { -}; - -static struct imxmmc_platform_data sdhc_pdata = { -}; - -static void __init zn5_init(void) -{ - pm_power_off = mxc91231_power_off; - - mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_DAT_VP__RXD2, "uart2-rx"); - mxc_iomux_alloc_pin(MXC91231_PIN_SP_USB_SE0_VM__TXD2, "uart2-tx"); - - mxc_register_device(&mxc_uart_device1, &uart_pdata); - mxc_register_device(&mxc_uart_device0, &uart_pdata); - - mxc_register_device(&mxc_sdhc_device0, &sdhc_pdata); - - mxc_register_device(&mxc_wdog_device0, NULL); - - return; -} - -static void __init zn5_timer_init(void) -{ - mxc91231_clocks_init(26000000); /* 26mhz ckih */ -} - -struct sys_timer zn5_timer = { - .init = zn5_timer_init, -}; - -MACHINE_START(MAGX_ZN5, "Motorola Zn5") - .boot_params = MXC91231_PHYS_OFFSET + 0x100, - .map_io = mxc91231_map_io, - .init_early = mxc91231_init_early, - .init_irq = mxc91231_init_irq, - .timer = &zn5_timer, - .init_machine = zn5_init, -MACHINE_END diff --git a/arch/arm/mach-mxc91231/mm.c b/arch/arm/mach-mxc91231/mm.c deleted file mode 100644 index a77f6daf6a2..00000000000 --- a/arch/arm/mach-mxc91231/mm.c +++ /dev/null @@ -1,62 +0,0 @@ -/* - * Copyright (C) 1999,2000 Arm Limited - * Copyright (C) 2000 Deep Blue Solutions Ltd - * Copyright (C) 2002 Shane Nay (shane@minirl.com) - * Copyright 2004-2005 Freescale Semiconductor, Inc. All Rights Reserved. - * - add MXC specific definitions - * Copyright 2006 Motorola, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include - -/* - * This structure defines the MXC memory map. - */ -static struct map_desc mxc91231_io_desc[] __initdata = { - imx_map_entry(MXC91231, L2CC, MT_DEVICE), - imx_map_entry(MXC91231, X_MEMC, MT_DEVICE), - imx_map_entry(MXC91231, ROMP, MT_DEVICE), - imx_map_entry(MXC91231, AVIC, MT_DEVICE), - imx_map_entry(MXC91231, AIPS1, MT_DEVICE), - imx_map_entry(MXC91231, SPBA0, MT_DEVICE), - imx_map_entry(MXC91231, SPBA1, MT_DEVICE), - imx_map_entry(MXC91231, AIPS2, MT_DEVICE), -}; - -/* - * This function initializes the memory map. It is called during the - * system startup to create static physical to virtual memory map for - * the IO modules. - */ -void __init mxc91231_map_io(void) -{ - iotable_init(mxc91231_io_desc, ARRAY_SIZE(mxc91231_io_desc)); -} - -void __init mxc91231_init_early(void) -{ - mxc_set_cpu_type(MXC_CPU_MXC91231); -} - -int mxc91231_register_gpios(void); - -void __init mxc91231_init_irq(void) -{ - mxc91231_register_gpios(); - mxc_init_irq(MXC91231_IO_ADDRESS(MXC91231_AVIC_BASE_ADDR)); -} diff --git a/arch/arm/mach-mxc91231/system.c b/arch/arm/mach-mxc91231/system.c deleted file mode 100644 index 736f7efd874..00000000000 --- a/arch/arm/mach-mxc91231/system.c +++ /dev/null @@ -1,51 +0,0 @@ -/* - * Copyright 2009 Dmitriy Taychenachev - * - * This file is released under the GPLv2 or later. - */ - -#include -#include - -#include -#include - -#include "crm_regs.h" - -#define WDOG_WCR MXC91231_IO_ADDRESS(MXC91231_WDOG1_BASE_ADDR) -#define WDOG_WCR_OUT_ENABLE (1 << 6) -#define WDOG_WCR_ASSERT (1 << 5) - -void mxc91231_power_off(void) -{ - u16 wcr; - - wcr = __raw_readw(WDOG_WCR); - wcr |= WDOG_WCR_OUT_ENABLE; - wcr &= ~WDOG_WCR_ASSERT; - __raw_writew(wcr, WDOG_WCR); -} - -void mxc91231_arch_reset(char mode, const char *cmd) -{ - u32 amcr; - - /* Reset the AP using CRM */ - amcr = __raw_readl(MXC_CRMAP_AMCR); - amcr &= ~MXC_CRMAP_AMCR_SW_AP; - __raw_writel(amcr, MXC_CRMAP_AMCR); - - mdelay(10); - cpu_reset(0); -} - -void mxc91231_prepare_idle(void) -{ - u32 crm_ctl; - - /* Go to WAIT mode after WFI */ - crm_ctl = __raw_readl(MXC_DSM_CRM_CONTROL); - crm_ctl &= ~(MXC_DSM_CRM_CTRL_LPMD0 | MXC_DSM_CRM_CTRL_LPMD1); - crm_ctl |= MXC_DSM_CRM_CTRL_LPMD_WAIT_MODE; - __raw_writel(crm_ctl, MXC_DSM_CRM_CONTROL); -} diff --git a/arch/arm/plat-mxc/Kconfig b/arch/arm/plat-mxc/Kconfig index b0cb4258e38..debd7be5245 100644 --- a/arch/arm/plat-mxc/Kconfig +++ b/arch/arm/plat-mxc/Kconfig @@ -30,13 +30,6 @@ config ARCH_MX3 help This enables support for systems based on the Freescale i.MX3 family -config ARCH_MXC91231 - bool "MXC91231-based" - select CPU_V6 - select MXC_AVIC - help - This enables support for systems based on the Freescale MXC91231 family - config ARCH_MX5 bool "MX5-based" select CPU_V7 @@ -48,7 +41,6 @@ endchoice source "arch/arm/mach-imx/Kconfig" source "arch/arm/mach-mx3/Kconfig" -source "arch/arm/mach-mxc91231/Kconfig" source "arch/arm/mach-mx5/Kconfig" endmenu diff --git a/arch/arm/plat-mxc/include/mach/common.h b/arch/arm/plat-mxc/include/mach/common.h index bfa1ffca5d7..da7991832af 100644 --- a/arch/arm/plat-mxc/include/mach/common.h +++ b/arch/arm/plat-mxc/include/mach/common.h @@ -23,7 +23,6 @@ extern void mx35_map_io(void); extern void mx50_map_io(void); extern void mx51_map_io(void); extern void mx53_map_io(void); -extern void mxc91231_map_io(void); extern void imx1_init_early(void); extern void imx21_init_early(void); extern void imx25_init_early(void); @@ -33,7 +32,6 @@ extern void imx35_init_early(void); extern void imx50_init_early(void); extern void imx51_init_early(void); extern void imx53_init_early(void); -extern void mxc91231_init_early(void); extern void mxc_init_irq(void __iomem *); extern void tzic_init_irq(void __iomem *); extern void mx1_init_irq(void); @@ -45,7 +43,6 @@ extern void mx35_init_irq(void); extern void mx50_init_irq(void); extern void mx51_init_irq(void); extern void mx53_init_irq(void); -extern void mxc91231_init_irq(void); extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq); extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int); extern int mx1_clocks_init(unsigned long fref); @@ -58,14 +55,10 @@ extern int mx51_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); extern int mx53_clocks_init(unsigned long ckil, unsigned long osc, unsigned long ckih1, unsigned long ckih2); -extern int mxc91231_clocks_init(unsigned long fref); extern int mxc_register_gpios(void); extern int mxc_register_device(struct platform_device *pdev, void *data); extern void mxc_set_cpu_type(unsigned int type); extern void mxc_arch_reset_init(void __iomem *); -extern void mxc91231_power_off(void); -extern void mxc91231_arch_reset(int, const char *); -extern void mxc91231_prepare_idle(void); extern void mx51_efikamx_reset(void); extern int mx53_revision(void); extern int mx53_display_revision(void); diff --git a/arch/arm/plat-mxc/include/mach/debug-macro.S b/arch/arm/plat-mxc/include/mach/debug-macro.S index 3b3a37c25c5..8e8d175e507 100644 --- a/arch/arm/plat-mxc/include/mach/debug-macro.S +++ b/arch/arm/plat-mxc/include/mach/debug-macro.S @@ -44,13 +44,6 @@ #define UART_PADDR MX51_UART1_BASE_ADDR #endif -#ifdef CONFIG_ARCH_MXC91231 -#ifdef UART_PADDR -#error "CONFIG_DEBUG_LL is incompatible with multiple archs" -#endif -#define UART_PADDR MXC91231_UART2_BASE_ADDR -#endif - #define UART_VADDR IMX_IO_ADDRESS(UART_PADDR) .macro addruart, rp, rv diff --git a/arch/arm/plat-mxc/include/mach/hardware.h b/arch/arm/plat-mxc/include/mach/hardware.h index 26bb1bab4ae..a881db5c395 100644 --- a/arch/arm/plat-mxc/include/mach/hardware.h +++ b/arch/arm/plat-mxc/include/mach/hardware.h @@ -86,15 +86,6 @@ * SPBA0 0x70000000+0x100000 -> 0xf5400000+0x100000 * AIPS1 0x73f00000+0x100000 -> 0xf5700000+0x100000 * AIPS2 0x83f00000+0x100000 -> 0xf4300000+0x100000 - * mxc91231: - * L2CC 0x30000000+0x010000 -> 0xf4400000+0x010000 - * X_MEMC 0xb8000000+0x010000 -> 0xf4c00000+0x010000 - * ROMP 0x60000000+0x010000 -> 0xf5000000+0x010000 - * AVIC 0x68000000+0x010000 -> 0xf5800000+0x010000 - * AIPS1 0x43f00000+0x100000 -> 0xf5300000+0x100000 - * SPBA0 0x50000000+0x100000 -> 0xf5400000+0x100000 - * SPBA1 0x52000000+0x100000 -> 0xf5600000+0x100000 - * AIPS2 0x53f00000+0x100000 -> 0xf5700000+0x100000 */ #define IMX_IO_P2V(x) ( \ 0xf4000000 + \ @@ -134,10 +125,6 @@ # include #endif -#ifdef CONFIG_ARCH_MXC91231 -# include -#endif - #include #define imx_map_entry(soc, name, _type) { \ diff --git a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h b/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h deleted file mode 100644 index bf28df0d58b..00000000000 --- a/arch/arm/plat-mxc/include/mach/iomux-mxc91231.h +++ /dev/null @@ -1,283 +0,0 @@ -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2008 by Sascha Hauer - * Copyright (C) 2009 by Dmitriy Taychenachev - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __MACH_IOMUX_MXC91231_H__ -#define __MACH_IOMUX_MXC91231_H__ - -/* - * various IOMUX output functions - */ - -#define IOMUX_OCONFIG_GPIO (0 << 4) /* used as GPIO */ -#define IOMUX_OCONFIG_FUNC (1 << 4) /* used as function */ -#define IOMUX_OCONFIG_ALT1 (2 << 4) /* used as alternate function 1 */ -#define IOMUX_OCONFIG_ALT2 (3 << 4) /* used as alternate function 2 */ -#define IOMUX_OCONFIG_ALT3 (4 << 4) /* used as alternate function 3 */ -#define IOMUX_OCONFIG_ALT4 (5 << 4) /* used as alternate function 4 */ -#define IOMUX_OCONFIG_ALT5 (6 << 4) /* used as alternate function 5 */ -#define IOMUX_OCONFIG_ALT6 (7 << 4) /* used as alternate function 6 */ -#define IOMUX_ICONFIG_NONE 0 /* not configured for input */ -#define IOMUX_ICONFIG_GPIO 1 /* used as GPIO */ -#define IOMUX_ICONFIG_FUNC 2 /* used as function */ -#define IOMUX_ICONFIG_ALT1 4 /* used as alternate function 1 */ -#define IOMUX_ICONFIG_ALT2 8 /* used as alternate function 2 */ - -#define IOMUX_CONFIG_GPIO (IOMUX_OCONFIG_GPIO | IOMUX_ICONFIG_GPIO) -#define IOMUX_CONFIG_FUNC (IOMUX_OCONFIG_FUNC | IOMUX_ICONFIG_FUNC) -#define IOMUX_CONFIG_ALT1 (IOMUX_OCONFIG_ALT1 | IOMUX_ICONFIG_ALT1) -#define IOMUX_CONFIG_ALT2 (IOMUX_OCONFIG_ALT2 | IOMUX_ICONFIG_ALT2) - -/* - * setups a single pin: - * - reserves the pin so that it is not claimed by another driver - * - setups the iomux according to the configuration - * - if the pin is configured as a GPIO, we claim it through kernel gpiolib - */ -int mxc_iomux_alloc_pin(unsigned int pin_mode, const char *label); -/* - * setups mutliple pins - * convenient way to call the above function with tables - */ -int mxc_iomux_setup_multiple_pins(const unsigned int *pin_list, unsigned count, - const char *label); - -/* - * releases a single pin: - * - make it available for a future use by another driver - * - frees the GPIO if the pin was configured as GPIO - * - DOES NOT reconfigure the IOMUX in its reset state - */ -void mxc_iomux_release_pin(unsigned int pin_mode); -/* - * releases multiple pins - * convenvient way to call the above function with tables - */ -void mxc_iomux_release_multiple_pins(const unsigned int *pin_list, int count); - -#define MUX_SIDE_AP (0) -#define MUX_SIDE_SP (1) - -#define MUX_SIDE_SHIFT (26) -#define MUX_SIDE_MASK (0x1 << MUX_SIDE_SHIFT) - -#define MUX_GPIO_PORT_SHIFT (23) -#define MUX_GPIO_PORT_MASK (0x7 << MUX_GPIO_PORT_SHIFT) - -#define MUX_GPIO_PIN_SHIFT (20) -#define MUX_GPIO_PIN_MASK (0x1f << MUX_GPIO_PIN_SHIFT) - -#define MUX_REG_SHIFT (15) -#define MUX_REG_MASK (0x1f << MUX_REG_SHIFT) - -#define MUX_FIELD_SHIFT (13) -#define MUX_FIELD_MASK (0x3 << MUX_FIELD_SHIFT) - -#define MUX_PADGRP_SHIFT (8) -#define MUX_PADGRP_MASK (0x1f << MUX_PADGRP_SHIFT) - -#define MUX_PIN_MASK (0xffffff << 8) - -#define GPIO_PORT_MAX (3) - -#define IOMUX_PIN(side, gport, gpin, ctlreg, ctlfield, padgrp) \ - (((side) << MUX_SIDE_SHIFT) | \ - (gport << MUX_GPIO_PORT_SHIFT) | \ - ((gpin) << MUX_GPIO_PIN_SHIFT) | \ - ((ctlreg) << MUX_REG_SHIFT) | \ - ((ctlfield) << MUX_FIELD_SHIFT) | \ - ((padgrp) << MUX_PADGRP_SHIFT)) - -#define MUX_MODE_OUT_SHIFT (4) -#define MUX_MODE_IN_SHIFT (0) -#define MUX_MODE_SHIFT (0) -#define MUX_MODE_MASK (0xff << MUX_MODE_SHIFT) - -#define IOMUX_MODE(pin, mode) \ - (pin | (mode << MUX_MODE_SHIFT)) - -enum iomux_pins { - /* AP Side pins */ - MXC91231_PIN_AP_CLE = IOMUX_PIN(0, 0, 0, 0, 0, 24), - MXC91231_PIN_AP_ALE = IOMUX_PIN(0, 0, 1, 0, 1, 24), - MXC91231_PIN_AP_CE_B = IOMUX_PIN(0, 0, 2, 0, 2, 24), - MXC91231_PIN_AP_RE_B = IOMUX_PIN(0, 0, 3, 0, 3, 24), - MXC91231_PIN_AP_WE_B = IOMUX_PIN(0, 0, 4, 1, 0, 24), - MXC91231_PIN_AP_WP_B = IOMUX_PIN(0, 0, 5, 1, 1, 24), - MXC91231_PIN_AP_BSY_B = IOMUX_PIN(0, 0, 6, 1, 2, 24), - MXC91231_PIN_AP_U1_TXD = IOMUX_PIN(0, 0, 7, 1, 3, 28), - MXC91231_PIN_AP_U1_RXD = IOMUX_PIN(0, 0, 8, 2, 0, 28), - MXC91231_PIN_AP_U1_RTS_B = IOMUX_PIN(0, 0, 9, 2, 1, 28), - MXC91231_PIN_AP_U1_CTS_B = IOMUX_PIN(0, 0, 10, 2, 2, 28), - MXC91231_PIN_AP_AD1_TXD = IOMUX_PIN(0, 0, 11, 2, 3, 9), - MXC91231_PIN_AP_AD1_RXD = IOMUX_PIN(0, 0, 12, 3, 0, 9), - MXC91231_PIN_AP_AD1_TXC = IOMUX_PIN(0, 0, 13, 3, 1, 9), - MXC91231_PIN_AP_AD1_TXFS = IOMUX_PIN(0, 0, 14, 3, 2, 9), - MXC91231_PIN_AP_AD2_TXD = IOMUX_PIN(0, 0, 15, 3, 3, 9), - MXC91231_PIN_AP_AD2_RXD = IOMUX_PIN(0, 0, 16, 4, 0, 9), - MXC91231_PIN_AP_AD2_TXC = IOMUX_PIN(0, 0, 17, 4, 1, 9), - MXC91231_PIN_AP_AD2_TXFS = IOMUX_PIN(0, 0, 18, 4, 2, 9), - MXC91231_PIN_AP_OWDAT = IOMUX_PIN(0, 0, 19, 4, 3, 28), - MXC91231_PIN_AP_IPU_LD17 = IOMUX_PIN(0, 0, 20, 5, 0, 28), - MXC91231_PIN_AP_IPU_D3_VSYNC = IOMUX_PIN(0, 0, 21, 5, 1, 28), - MXC91231_PIN_AP_IPU_D3_HSYNC = IOMUX_PIN(0, 0, 22, 5, 2, 28), - MXC91231_PIN_AP_IPU_D3_CLK = IOMUX_PIN(0, 0, 23, 5, 3, 28), - MXC91231_PIN_AP_IPU_D3_DRDY = IOMUX_PIN(0, 0, 24, 6, 0, 28), - MXC91231_PIN_AP_IPU_D3_CONTR = IOMUX_PIN(0, 0, 25, 6, 1, 28), - MXC91231_PIN_AP_IPU_D0_CS = IOMUX_PIN(0, 0, 26, 6, 2, 28), - MXC91231_PIN_AP_IPU_LD16 = IOMUX_PIN(0, 0, 27, 6, 3, 28), - MXC91231_PIN_AP_IPU_D2_CS = IOMUX_PIN(0, 0, 28, 7, 0, 28), - MXC91231_PIN_AP_IPU_PAR_RS = IOMUX_PIN(0, 0, 29, 7, 1, 28), - MXC91231_PIN_AP_IPU_D3_PS = IOMUX_PIN(0, 0, 30, 7, 2, 28), - MXC91231_PIN_AP_IPU_D3_CLS = IOMUX_PIN(0, 0, 31, 7, 3, 28), - MXC91231_PIN_AP_IPU_RD = IOMUX_PIN(0, 1, 0, 8, 0, 28), - MXC91231_PIN_AP_IPU_WR = IOMUX_PIN(0, 1, 1, 8, 1, 28), - MXC91231_PIN_AP_IPU_LD0 = IOMUX_PIN(0, 7, 0, 8, 2, 28), - MXC91231_PIN_AP_IPU_LD1 = IOMUX_PIN(0, 7, 0, 8, 3, 28), - MXC91231_PIN_AP_IPU_LD2 = IOMUX_PIN(0, 7, 0, 9, 0, 28), - MXC91231_PIN_AP_IPU_LD3 = IOMUX_PIN(0, 1, 2, 9, 1, 28), - MXC91231_PIN_AP_IPU_LD4 = IOMUX_PIN(0, 1, 3, 9, 2, 28), - MXC91231_PIN_AP_IPU_LD5 = IOMUX_PIN(0, 1, 4, 9, 3, 28), - MXC91231_PIN_AP_IPU_LD6 = IOMUX_PIN(0, 1, 5, 10, 0, 28), - MXC91231_PIN_AP_IPU_LD7 = IOMUX_PIN(0, 1, 6, 10, 1, 28), - MXC91231_PIN_AP_IPU_LD8 = IOMUX_PIN(0, 1, 7, 10, 2, 28), - MXC91231_PIN_AP_IPU_LD9 = IOMUX_PIN(0, 1, 8, 10, 3, 28), - MXC91231_PIN_AP_IPU_LD10 = IOMUX_PIN(0, 1, 9, 11, 0, 28), - MXC91231_PIN_AP_IPU_LD11 = IOMUX_PIN(0, 1, 10, 11, 1, 28), - MXC91231_PIN_AP_IPU_LD12 = IOMUX_PIN(0, 1, 11, 11, 2, 28), - MXC91231_PIN_AP_IPU_LD13 = IOMUX_PIN(0, 1, 12, 11, 3, 28), - MXC91231_PIN_AP_IPU_LD14 = IOMUX_PIN(0, 1, 13, 12, 0, 28), - MXC91231_PIN_AP_IPU_LD15 = IOMUX_PIN(0, 1, 14, 12, 1, 28), - MXC91231_PIN_AP_KPROW4 = IOMUX_PIN(0, 7, 0, 12, 2, 10), - MXC91231_PIN_AP_KPROW5 = IOMUX_PIN(0, 1, 16, 12, 3, 10), - MXC91231_PIN_AP_GPIO_AP_B17 = IOMUX_PIN(0, 1, 17, 13, 0, 10), - MXC91231_PIN_AP_GPIO_AP_B18 = IOMUX_PIN(0, 1, 18, 13, 1, 10), - MXC91231_PIN_AP_KPCOL3 = IOMUX_PIN(0, 1, 19, 13, 2, 11), - MXC91231_PIN_AP_KPCOL4 = IOMUX_PIN(0, 1, 20, 13, 3, 11), - MXC91231_PIN_AP_KPCOL5 = IOMUX_PIN(0, 1, 21, 14, 0, 11), - MXC91231_PIN_AP_GPIO_AP_B22 = IOMUX_PIN(0, 1, 22, 14, 1, 11), - MXC91231_PIN_AP_GPIO_AP_B23 = IOMUX_PIN(0, 1, 23, 14, 2, 11), - MXC91231_PIN_AP_CSI_D0 = IOMUX_PIN(0, 1, 24, 14, 3, 21), - MXC91231_PIN_AP_CSI_D1 = IOMUX_PIN(0, 1, 25, 15, 0, 21), - MXC91231_PIN_AP_CSI_D2 = IOMUX_PIN(0, 1, 26, 15, 1, 21), - MXC91231_PIN_AP_CSI_D3 = IOMUX_PIN(0, 1, 27, 15, 2, 21), - MXC91231_PIN_AP_CSI_D4 = IOMUX_PIN(0, 1, 28, 15, 3, 21), - MXC91231_PIN_AP_CSI_D5 = IOMUX_PIN(0, 1, 29, 16, 0, 21), - MXC91231_PIN_AP_CSI_D6 = IOMUX_PIN(0, 1, 30, 16, 1, 21), - MXC91231_PIN_AP_CSI_D7 = IOMUX_PIN(0, 1, 31, 16, 2, 21), - MXC91231_PIN_AP_CSI_D8 = IOMUX_PIN(0, 2, 0, 16, 3, 21), - MXC91231_PIN_AP_CSI_D9 = IOMUX_PIN(0, 2, 1, 17, 0, 21), - MXC91231_PIN_AP_CSI_MCLK = IOMUX_PIN(0, 2, 2, 17, 1, 21), - MXC91231_PIN_AP_CSI_VSYNC = IOMUX_PIN(0, 2, 3, 17, 2, 21), - MXC91231_PIN_AP_CSI_HSYNC = IOMUX_PIN(0, 2, 4, 17, 3, 21), - MXC91231_PIN_AP_CSI_PIXCLK = IOMUX_PIN(0, 2, 5, 18, 0, 21), - MXC91231_PIN_AP_I2CLK = IOMUX_PIN(0, 2, 6, 18, 1, 12), - MXC91231_PIN_AP_I2DAT = IOMUX_PIN(0, 2, 7, 18, 2, 12), - MXC91231_PIN_AP_GPIO_AP_C8 = IOMUX_PIN(0, 2, 8, 18, 3, 9), - MXC91231_PIN_AP_GPIO_AP_C9 = IOMUX_PIN(0, 2, 9, 19, 0, 9), - MXC91231_PIN_AP_GPIO_AP_C10 = IOMUX_PIN(0, 2, 10, 19, 1, 9), - MXC91231_PIN_AP_GPIO_AP_C11 = IOMUX_PIN(0, 2, 11, 19, 2, 9), - MXC91231_PIN_AP_GPIO_AP_C12 = IOMUX_PIN(0, 2, 12, 19, 3, 9), - MXC91231_PIN_AP_GPIO_AP_C13 = IOMUX_PIN(0, 2, 13, 20, 0, 28), - MXC91231_PIN_AP_GPIO_AP_C14 = IOMUX_PIN(0, 2, 14, 20, 1, 28), - MXC91231_PIN_AP_GPIO_AP_C15 = IOMUX_PIN(0, 2, 15, 20, 2, 9), - MXC91231_PIN_AP_GPIO_AP_C16 = IOMUX_PIN(0, 2, 16, 20, 3, 9), - MXC91231_PIN_AP_GPIO_AP_C17 = IOMUX_PIN(0, 2, 17, 21, 0, 9), - MXC91231_PIN_AP_ED_INT0 = IOMUX_PIN(0, 2, 18, 21, 1, 22), - MXC91231_PIN_AP_ED_INT1 = IOMUX_PIN(0, 2, 19, 21, 2, 22), - MXC91231_PIN_AP_ED_INT2 = IOMUX_PIN(0, 2, 20, 21, 3, 22), - MXC91231_PIN_AP_ED_INT3 = IOMUX_PIN(0, 2, 21, 22, 0, 22), - MXC91231_PIN_AP_ED_INT4 = IOMUX_PIN(0, 2, 22, 22, 1, 23), - MXC91231_PIN_AP_ED_INT5 = IOMUX_PIN(0, 2, 23, 22, 2, 23), - MXC91231_PIN_AP_ED_INT6 = IOMUX_PIN(0, 2, 24, 22, 3, 23), - MXC91231_PIN_AP_ED_INT7 = IOMUX_PIN(0, 2, 25, 23, 0, 23), - MXC91231_PIN_AP_U2_DSR_B = IOMUX_PIN(0, 2, 26, 23, 1, 28), - MXC91231_PIN_AP_U2_RI_B = IOMUX_PIN(0, 2, 27, 23, 2, 28), - MXC91231_PIN_AP_U2_CTS_B = IOMUX_PIN(0, 2, 28, 23, 3, 28), - MXC91231_PIN_AP_U2_DTR_B = IOMUX_PIN(0, 2, 29, 24, 0, 28), - MXC91231_PIN_AP_KPROW0 = IOMUX_PIN(0, 7, 0, 24, 1, 10), - MXC91231_PIN_AP_KPROW1 = IOMUX_PIN(0, 1, 15, 24, 2, 10), - MXC91231_PIN_AP_KPROW2 = IOMUX_PIN(0, 7, 0, 24, 3, 10), - MXC91231_PIN_AP_KPROW3 = IOMUX_PIN(0, 7, 0, 25, 0, 10), - MXC91231_PIN_AP_KPCOL0 = IOMUX_PIN(0, 7, 0, 25, 1, 11), - MXC91231_PIN_AP_KPCOL1 = IOMUX_PIN(0, 7, 0, 25, 2, 11), - MXC91231_PIN_AP_KPCOL2 = IOMUX_PIN(0, 7, 0, 25, 3, 11), - - /* Shared pins */ - MXC91231_PIN_SP_U3_TXD = IOMUX_PIN(1, 3, 0, 0, 0, 28), - MXC91231_PIN_SP_U3_RXD = IOMUX_PIN(1, 3, 1, 0, 1, 28), - MXC91231_PIN_SP_U3_RTS_B = IOMUX_PIN(1, 3, 2, 0, 2, 28), - MXC91231_PIN_SP_U3_CTS_B = IOMUX_PIN(1, 3, 3, 0, 3, 28), - MXC91231_PIN_SP_USB_TXOE_B = IOMUX_PIN(1, 3, 4, 1, 0, 28), - MXC91231_PIN_SP_USB_DAT_VP = IOMUX_PIN(1, 3, 5, 1, 1, 28), - MXC91231_PIN_SP_USB_SE0_VM = IOMUX_PIN(1, 3, 6, 1, 2, 28), - MXC91231_PIN_SP_USB_RXD = IOMUX_PIN(1, 3, 7, 1, 3, 28), - MXC91231_PIN_SP_UH2_TXOE_B = IOMUX_PIN(1, 3, 8, 2, 0, 28), - MXC91231_PIN_SP_UH2_SPEED = IOMUX_PIN(1, 3, 9, 2, 1, 28), - MXC91231_PIN_SP_UH2_SUSPEN = IOMUX_PIN(1, 3, 10, 2, 2, 28), - MXC91231_PIN_SP_UH2_TXDP = IOMUX_PIN(1, 3, 11, 2, 3, 28), - MXC91231_PIN_SP_UH2_RXDP = IOMUX_PIN(1, 3, 12, 3, 0, 28), - MXC91231_PIN_SP_UH2_RXDM = IOMUX_PIN(1, 3, 13, 3, 1, 28), - MXC91231_PIN_SP_UH2_OVR = IOMUX_PIN(1, 3, 14, 3, 2, 28), - MXC91231_PIN_SP_UH2_PWR = IOMUX_PIN(1, 3, 15, 3, 3, 28), - MXC91231_PIN_SP_SD1_DAT0 = IOMUX_PIN(1, 3, 16, 4, 0, 25), - MXC91231_PIN_SP_SD1_DAT1 = IOMUX_PIN(1, 3, 17, 4, 1, 25), - MXC91231_PIN_SP_SD1_DAT2 = IOMUX_PIN(1, 3, 18, 4, 2, 25), - MXC91231_PIN_SP_SD1_DAT3 = IOMUX_PIN(1, 3, 19, 4, 3, 25), - MXC91231_PIN_SP_SD1_CMD = IOMUX_PIN(1, 3, 20, 5, 0, 25), - MXC91231_PIN_SP_SD1_CLK = IOMUX_PIN(1, 3, 21, 5, 1, 25), - MXC91231_PIN_SP_SD2_DAT0 = IOMUX_PIN(1, 3, 22, 5, 2, 26), - MXC91231_PIN_SP_SD2_DAT1 = IOMUX_PIN(1, 3, 23, 5, 3, 26), - MXC91231_PIN_SP_SD2_DAT2 = IOMUX_PIN(1, 3, 24, 6, 0, 26), - MXC91231_PIN_SP_SD2_DAT3 = IOMUX_PIN(1, 3, 25, 6, 1, 26), - MXC91231_PIN_SP_GPIO_SP_A26 = IOMUX_PIN(1, 3, 26, 6, 2, 28), - MXC91231_PIN_SP_SPI1_CLK = IOMUX_PIN(1, 3, 27, 6, 3, 13), - MXC91231_PIN_SP_SPI1_MOSI = IOMUX_PIN(1, 3, 28, 7, 0, 13), - MXC91231_PIN_SP_SPI1_MISO = IOMUX_PIN(1, 3, 29, 7, 1, 13), - MXC91231_PIN_SP_SPI1_SS0 = IOMUX_PIN(1, 3, 30, 7, 2, 13), - MXC91231_PIN_SP_SPI1_SS1 = IOMUX_PIN(1, 3, 31, 7, 3, 13), - MXC91231_PIN_SP_SD2_CMD = IOMUX_PIN(1, 7, 0, 8, 0, 26), - MXC91231_PIN_SP_SD2_CLK = IOMUX_PIN(1, 7, 0, 8, 1, 26), - MXC91231_PIN_SP_SIM1_RST_B = IOMUX_PIN(1, 2, 30, 8, 2, 28), - MXC91231_PIN_SP_SIM1_SVEN = IOMUX_PIN(1, 7, 0, 8, 3, 28), - MXC91231_PIN_SP_SIM1_CLK = IOMUX_PIN(1, 7, 0, 9, 0, 28), - MXC91231_PIN_SP_SIM1_TRXD = IOMUX_PIN(1, 7, 0, 9, 1, 28), - MXC91231_PIN_SP_SIM1_PD = IOMUX_PIN(1, 2, 31, 9, 2, 28), - MXC91231_PIN_SP_UH2_TXDM = IOMUX_PIN(1, 7, 0, 9, 3, 28), - MXC91231_PIN_SP_UH2_RXD = IOMUX_PIN(1, 7, 0, 10, 0, 28), -}; - -#define PIN_AP_MAX (104) -#define PIN_SP_MAX (41) - -#define PIN_MAX (PIN_AP_MAX + PIN_SP_MAX) - -/* - * Convenience values for use with mxc_iomux_mode() - * - * Format here is MXC91231_PIN_(pin name)__(function) - */ - -#define MXC91231_PIN_SP_USB_DAT_VP__USB_DAT_VP \ - IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_FUNC) -#define MXC91231_PIN_SP_USB_SE0_VM__USB_SE0_VM \ - IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_FUNC) -#define MXC91231_PIN_SP_USB_DAT_VP__RXD2 \ - IOMUX_MODE(MXC91231_PIN_SP_USB_DAT_VP, IOMUX_CONFIG_ALT1) -#define MXC91231_PIN_SP_USB_SE0_VM__TXD2 \ - IOMUX_MODE(MXC91231_PIN_SP_USB_SE0_VM, IOMUX_CONFIG_ALT1) - - -#endif /* __MACH_IOMUX_MXC91231_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index a3d930d3e65..35c89bcdf75 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -35,8 +35,6 @@ #define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_SOC_IMX51 #define MXC_GPIO_IRQS (32 * 4) -#elif defined CONFIG_ARCH_MXC91231 -#define MXC_GPIO_IRQS (32 * 4) #elif defined CONFIG_ARCH_MX3 #define MXC_GPIO_IRQS (32 * 3) #endif diff --git a/arch/arm/plat-mxc/include/mach/memory.h b/arch/arm/plat-mxc/include/mach/memory.h index 5d51cbb9889..11be5cdbdd1 100644 --- a/arch/arm/plat-mxc/include/mach/memory.h +++ b/arch/arm/plat-mxc/include/mach/memory.h @@ -19,7 +19,6 @@ #define MX50_PHYS_OFFSET UL(0x70000000) #define MX51_PHYS_OFFSET UL(0x90000000) #define MX53_PHYS_OFFSET UL(0x70000000) -#define MXC91231_PHYS_OFFSET UL(0x90000000) #if !defined(CONFIG_RUNTIME_PHYS_OFFSET) # if defined CONFIG_ARCH_MX1 @@ -32,8 +31,6 @@ # define PLAT_PHYS_OFFSET MX27_PHYS_OFFSET # elif defined CONFIG_ARCH_MX3 # define PLAT_PHYS_OFFSET MX3x_PHYS_OFFSET -# elif defined CONFIG_ARCH_MXC91231 -# define PLAT_PHYS_OFFSET MXC91231_PHYS_OFFSET # elif defined CONFIG_ARCH_MX50 # define PLAT_PHYS_OFFSET MX50_PHYS_OFFSET # elif defined CONFIG_ARCH_MX51 diff --git a/arch/arm/plat-mxc/include/mach/mxc.h b/arch/arm/plat-mxc/include/mach/mxc.h index 1aea818d9d3..0aba8b18bc4 100644 --- a/arch/arm/plat-mxc/include/mach/mxc.h +++ b/arch/arm/plat-mxc/include/mach/mxc.h @@ -35,7 +35,6 @@ #define MXC_CPU_MX50 50 #define MXC_CPU_MX51 51 #define MXC_CPU_MX53 53 -#define MXC_CPU_MXC91231 91231 #define IMX_CHIP_REVISION_1_0 0x10 #define IMX_CHIP_REVISION_1_1 0x11 @@ -177,18 +176,6 @@ extern unsigned int __mxc_cpu_type; # define cpu_is_mx53() (0) #endif -#ifdef CONFIG_ARCH_MXC91231 -# ifdef mxc_cpu_type -# undef mxc_cpu_type -# define mxc_cpu_type __mxc_cpu_type -# else -# define mxc_cpu_type MXC_CPU_MXC91231 -# endif -# define cpu_is_mxc91231() (mxc_cpu_type == MXC_CPU_MXC91231) -#else -# define cpu_is_mxc91231() (0) -#endif - #ifndef __ASSEMBLY__ struct cpu_op { @@ -214,7 +201,7 @@ extern struct cpu_op *(*get_cpu_op)(int *op); #define CSCR_A(n) (IO_ADDRESS(WEIM_BASE_ADDR + n * 0x10 + 0x8)) #endif -#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35() || cpu_is_mxc91231()) +#define cpu_is_mx3() (cpu_is_mx31() || cpu_is_mx35()) #define cpu_is_mx2() (cpu_is_mx21() || cpu_is_mx27()) #endif /* __ASM_ARCH_MXC_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/mxc91231.h b/arch/arm/plat-mxc/include/mach/mxc91231.h deleted file mode 100644 index 765190fe633..00000000000 --- a/arch/arm/plat-mxc/include/mach/mxc91231.h +++ /dev/null @@ -1,256 +0,0 @@ -/* - * Copyright 2004-2006 Freescale Semiconductor, Inc. All Rights Reserved. - * - Platform specific register memory map - * - * Copyright 2005-2007 Motorola, Inc. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ -#ifndef __MACH_MXC91231_H__ -#define __MACH_MXC91231_H__ - -/* - * L2CC - */ -#define MXC91231_L2CC_BASE_ADDR 0x30000000 -#define MXC91231_L2CC_SIZE SZ_64K - -/* - * AIPS 1 - */ -#define MXC91231_AIPS1_BASE_ADDR 0x43F00000 -#define MXC91231_AIPS1_SIZE SZ_1M - -#define MXC91231_AIPS1_CTRL_BASE_ADDR MXC91231_AIPS1_BASE_ADDR -#define MXC91231_MAX_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x04000) -#define MXC91231_EVTMON_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x08000) -#define MXC91231_CLKCTL_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x0C000) -#define MXC91231_ETB_SLOT4_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x10000) -#define MXC91231_ETB_SLOT5_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x14000) -#define MXC91231_ECT_CTIO_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x18000) -#define MXC91231_I2C_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x80000) -#define MXC91231_MU_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x88000) -#define MXC91231_UART1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x90000) -#define MXC91231_UART2_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x94000) -#define MXC91231_DSM_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x98000) -#define MXC91231_OWIRE_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0x9C000) -#define MXC91231_SSI1_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA0000) -#define MXC91231_KPP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xA8000) -#define MXC91231_IOMUX_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xAC000) -#define MXC91231_CTI_AP_BASE_ADDR (MXC91231_AIPS1_BASE_ADDR + 0xB8000) - -/* - * AIPS 2 - */ -#define MXC91231_AIPS2_BASE_ADDR 0x53F00000 -#define MXC91231_AIPS2_SIZE SZ_1M - -#define MXC91231_GEMK_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x8C000) -#define MXC91231_GPT1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x90000) -#define MXC91231_EPIT1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0x94000) -#define MXC91231_SCC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xAC000) -#define MXC91231_RNGA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xB0000) -#define MXC91231_IPU_CTRL_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC0000) -#define MXC91231_AUDMUX_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC4000) -#define MXC91231_EDIO_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xC8000) -#define MXC91231_GPIO1_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xCC000) -#define MXC91231_GPIO2_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD0000) -#define MXC91231_SDMA_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD4000) -#define MXC91231_RTC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xD8000) -#define MXC91231_WDOG1_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xDC000) -#define MXC91231_PWM_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE0000) -#define MXC91231_GPIO3_AP_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE4000) -#define MXC91231_WDOG2_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xE8000) -#define MXC91231_RTIC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xEC000) -#define MXC91231_LPMC_BASE_ADDR (MXC91231_AIPS2_BASE_ADDR + 0xF0000) - -/* - * SPBA global module 0 - */ -#define MXC91231_SPBA0_BASE_ADDR 0x50000000 -#define MXC91231_SPBA0_SIZE SZ_1M - -#define MXC91231_MMC_SDHC1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x04000) -#define MXC91231_MMC_SDHC2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x08000) -#define MXC91231_UART3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x0C000) -#define MXC91231_CSPI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x10000) -#define MXC91231_SSI2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x14000) -#define MXC91231_SIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x18000) -#define MXC91231_IIM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x1C000) -#define MXC91231_CTI_SDMA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x20000) -#define MXC91231_USBOTG_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x24000) -#define MXC91231_USBOTG_DATA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x28000) -#define MXC91231_CSPI1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x30000) -#define MXC91231_SPBA_CTRL_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x3C000) -#define MXC91231_IOMUX_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x40000) -#define MXC91231_CRM_COM_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x44000) -#define MXC91231_CRM_AP_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x48000) -#define MXC91231_PLL0_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x4C000) -#define MXC91231_PLL1_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x50000) -#define MXC91231_PLL2_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x54000) -#define MXC91231_GPIO4_SH_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x58000) -#define MXC91231_HAC_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000) -#define MXC91231_SAHARA_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x5C000) -#define MXC91231_PLL3_BASE_ADDR (MXC91231_SPBA0_BASE_ADDR + 0x60000) - -/* - * SPBA global module 1 - */ -#define MXC91231_SPBA1_BASE_ADDR 0x52000000 -#define MXC91231_SPBA1_SIZE SZ_1M - -#define MXC91231_MQSPI_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x34000) -#define MXC91231_EL1T_BASE_ADDR (MXC91231_SPBA1_BASE_ADDR + 0x38000) - -/*! - * Defines for SPBA modules - */ -#define MXC91231_SPBA_SDHC1 0x04 -#define MXC91231_SPBA_SDHC2 0x08 -#define MXC91231_SPBA_UART3 0x0C -#define MXC91231_SPBA_CSPI2 0x10 -#define MXC91231_SPBA_SSI2 0x14 -#define MXC91231_SPBA_SIM 0x18 -#define MXC91231_SPBA_IIM 0x1C -#define MXC91231_SPBA_CTI_SDMA 0x20 -#define MXC91231_SPBA_USBOTG_CTRL_REGS 0x24 -#define MXC91231_SPBA_USBOTG_DATA_REGS 0x28 -#define MXC91231_SPBA_CSPI1 0x30 -#define MXC91231_SPBA_MQSPI 0x34 -#define MXC91231_SPBA_EL1T 0x38 -#define MXC91231_SPBA_IOMUX 0x40 -#define MXC91231_SPBA_CRM_COM 0x44 -#define MXC91231_SPBA_CRM_AP 0x48 -#define MXC91231_SPBA_PLL0 0x4C -#define MXC91231_SPBA_PLL1 0x50 -#define MXC91231_SPBA_PLL2 0x54 -#define MXC91231_SPBA_GPIO4 0x58 -#define MXC91231_SPBA_SAHARA 0x5C - -/* - * ROMP and AVIC - */ -#define MXC91231_ROMP_BASE_ADDR 0x60000000 -#define MXC91231_ROMP_SIZE SZ_64K - -#define MXC91231_AVIC_BASE_ADDR 0x68000000 -#define MXC91231_AVIC_SIZE SZ_64K - -/* - * NAND, SDRAM, WEIM, M3IF, EMI controllers - */ -#define MXC91231_X_MEMC_BASE_ADDR 0xB8000000 -#define MXC91231_X_MEMC_SIZE SZ_64K - -#define MXC91231_NFC_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x0000) -#define MXC91231_ESDCTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x1000) -#define MXC91231_WEIM_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x2000) -#define MXC91231_M3IF_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x3000) -#define MXC91231_EMI_CTL_BASE_ADDR (MXC91231_X_MEMC_BASE_ADDR + 0x4000) - -/* - * Memory regions and CS - * CPLD is connected on CS4 - * CS5 is TP1021 or it is not connected - * */ -#define MXC91231_FB_RAM_BASE_ADDR 0x78000000 -#define MXC91231_FB_RAM_SIZE SZ_256K -#define MXC91231_CSD0_BASE_ADDR 0x80000000 -#define MXC91231_CSD1_BASE_ADDR 0x90000000 -#define MXC91231_CS0_BASE_ADDR 0xA0000000 -#define MXC91231_CS1_BASE_ADDR 0xA8000000 -#define MXC91231_CS2_BASE_ADDR 0xB0000000 -#define MXC91231_CS3_BASE_ADDR 0xB2000000 -#define MXC91231_CS4_BASE_ADDR 0xB4000000 -#define MXC91231_CS5_BASE_ADDR 0xB6000000 - -/* - * This macro defines the physical to virtual address mapping for all the - * peripheral modules. It is used by passing in the physical address as x - * and returning the virtual address. - */ -#define MXC91231_IO_P2V(x) IMX_IO_P2V(x) -#define MXC91231_IO_ADDRESS(x) IOMEM(MXC91231_IO_P2V(x)) - -/* - * Interrupt numbers - */ -#define MXC91231_INT_GPIO3 0 -#define MXC91231_INT_EL1T_CI 1 -#define MXC91231_INT_EL1T_RFCI 2 -#define MXC91231_INT_EL1T_RFI 3 -#define MXC91231_INT_EL1T_MCU 4 -#define MXC91231_INT_EL1T_IPI 5 -#define MXC91231_INT_MU_GEN 6 -#define MXC91231_INT_GPIO4 7 -#define MXC91231_INT_MMC_SDHC2 8 -#define MXC91231_INT_MMC_SDHC1 9 -#define MXC91231_INT_I2C 10 -#define MXC91231_INT_SSI2 11 -#define MXC91231_INT_SSI1 12 -#define MXC91231_INT_CSPI2 13 -#define MXC91231_INT_CSPI1 14 -#define MXC91231_INT_RTIC 15 -#define MXC91231_INT_SAHARA 15 -#define MXC91231_INT_HAC 15 -#define MXC91231_INT_UART3_RX 16 -#define MXC91231_INT_UART3_TX 17 -#define MXC91231_INT_UART3_MINT 18 -#define MXC91231_INT_ECT 19 -#define MXC91231_INT_SIM_IPB 20 -#define MXC91231_INT_SIM_DATA 21 -#define MXC91231_INT_RNGA 22 -#define MXC91231_INT_DSM_AP 23 -#define MXC91231_INT_KPP 24 -#define MXC91231_INT_RTC 25 -#define MXC91231_INT_PWM 26 -#define MXC91231_INT_GEMK_AP 27 -#define MXC91231_INT_EPIT 28 -#define MXC91231_INT_GPT 29 -#define MXC91231_INT_UART2_RX 30 -#define MXC91231_INT_UART2_TX 31 -#define MXC91231_INT_UART2_MINT 32 -#define MXC91231_INT_NANDFC 33 -#define MXC91231_INT_SDMA 34 -#define MXC91231_INT_USB_WAKEUP 35 -#define MXC91231_INT_USB_SOF 36 -#define MXC91231_INT_PMU_EVTMON 37 -#define MXC91231_INT_USB_FUNC 38 -#define MXC91231_INT_USB_DMA 39 -#define MXC91231_INT_USB_CTRL 40 -#define MXC91231_INT_IPU_ERR 41 -#define MXC91231_INT_IPU_SYN 42 -#define MXC91231_INT_UART1_RX 43 -#define MXC91231_INT_UART1_TX 44 -#define MXC91231_INT_UART1_MINT 45 -#define MXC91231_INT_IIM 46 -#define MXC91231_INT_MU_RX_OR 47 -#define MXC91231_INT_MU_TX_OR 48 -#define MXC91231_INT_SCC_SCM 49 -#define MXC91231_INT_SCC_SMN 50 -#define MXC91231_INT_GPIO2 51 -#define MXC91231_INT_GPIO1 52 -#define MXC91231_INT_MQSPI1 53 -#define MXC91231_INT_MQSPI2 54 -#define MXC91231_INT_WDOG2 55 -#define MXC91231_INT_EXT_INT7 56 -#define MXC91231_INT_EXT_INT6 57 -#define MXC91231_INT_EXT_INT5 58 -#define MXC91231_INT_EXT_INT4 59 -#define MXC91231_INT_EXT_INT3 60 -#define MXC91231_INT_EXT_INT2 61 -#define MXC91231_INT_EXT_INT1 62 -#define MXC91231_INT_EXT_INT0 63 - -#define MXC91231_MAX_INT_LINES 63 -#define MXC91231_MAX_EXT_LINES 8 - -#endif /* __MACH_MXC91231_H__ */ diff --git a/arch/arm/plat-mxc/include/mach/system.h b/arch/arm/plat-mxc/include/mach/system.h index 0417da9f710..51f02a9d41a 100644 --- a/arch/arm/plat-mxc/include/mach/system.h +++ b/arch/arm/plat-mxc/include/mach/system.h @@ -24,12 +24,6 @@ extern void mx5_cpu_lp_set(enum mxc_cpu_pwr_mode mode); static inline void arch_idle(void) { -#ifdef CONFIG_ARCH_MXC91231 - if (cpu_is_mxc91231()) { - /* Need this to set DSM low-power mode */ - mxc91231_prepare_idle(); - } -#endif /* fix i.MX31 errata TLSbo65953 and i.MX35 errata ENGcm09472 */ if (cpu_is_mx31() || cpu_is_mx35()) { unsigned long reg = 0; diff --git a/arch/arm/plat-mxc/include/mach/timex.h b/arch/arm/plat-mxc/include/mach/timex.h index 2d9624697cc..d61d5c74817 100644 --- a/arch/arm/plat-mxc/include/mach/timex.h +++ b/arch/arm/plat-mxc/include/mach/timex.h @@ -26,8 +26,6 @@ #define CLOCK_TICK_RATE 16000000 #elif defined CONFIG_ARCH_MX5 #define CLOCK_TICK_RATE 8000000 -#elif defined CONFIG_ARCH_MXC91231 -#define CLOCK_TICK_RATE 13000000 #endif #endif /* __ASM_ARCH_MXC_TIMEX_H__ */ diff --git a/arch/arm/plat-mxc/system.c b/arch/arm/plat-mxc/system.c index 3455fc0575a..8024f2ac177 100644 --- a/arch/arm/plat-mxc/system.c +++ b/arch/arm/plat-mxc/system.c @@ -37,12 +37,6 @@ void arch_reset(char mode, const char *cmd) { unsigned int wcr_enable; -#ifdef CONFIG_ARCH_MXC91231 - if (cpu_is_mxc91231()) { - mxc91231_arch_reset(mode, cmd); - return; - } -#endif #ifdef CONFIG_MACH_MX51_EFIKAMX if (machine_is_mx51_efikamx()) { mx51_efikamx_reset(); diff --git a/arch/arm/plat-mxc/time.c b/arch/arm/plat-mxc/time.c index 2237ff8b434..40f32e7950a 100644 --- a/arch/arm/plat-mxc/time.c +++ b/arch/arm/plat-mxc/time.c @@ -54,7 +54,7 @@ #define MX2_TSTAT_CAPT (1 << 1) #define MX2_TSTAT_COMP (1 << 0) -/* MX31, MX35, MX25, MXC91231, MX5 */ +/* MX31, MX35, MX25, MX5 */ #define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */ #define V2_TCTL_CLK_IPG (1 << 6) #define V2_TCTL_FRR (1 << 9)