From: Bartosz Markowski Date: Thu, 26 Sep 2013 15:47:13 +0000 (+0200) Subject: ath10k: split wmi_cmd_init path X-Git-Tag: v3.13-rc1~105^2~55^2^2~53^2~30 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=12b2b9e33a58ff51a1a41a90e976a863736cc863;p=~emulex%2Finfiniband.git ath10k: split wmi_cmd_init path Due to API differences in initialization structures for main and 10.x firmwares we need to split the wmi_init_cmd and wmi_resource_config structures. This will be usefull also when setting the correct TARGET values, like: number of peers, vdevs, pdevs etc. Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 8c223671ecc..71ad1b8868b 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -1908,7 +1908,7 @@ int ath10k_wmi_pdev_set_param(struct ath10k *ar, enum wmi_pdev_param id, return ath10k_wmi_cmd_send(ar, skb, ar->wmi.cmd->pdev_set_param_cmdid); } -int ath10k_wmi_cmd_init(struct ath10k *ar) +static int ath10k_wmi_main_cmd_init(struct ath10k *ar) { struct wmi_init_cmd *cmd; struct sk_buff *buf; @@ -2007,6 +2007,109 @@ out: return ath10k_wmi_cmd_send(ar, buf, ar->wmi.cmd->init_cmdid); } +static int ath10k_wmi_10x_cmd_init(struct ath10k *ar) +{ + struct wmi_init_cmd_10x *cmd; + struct sk_buff *buf; + struct wmi_resource_config_10x config = {}; + u32 len, val; + int i; + + config.num_vdevs = __cpu_to_le32(TARGET_NUM_VDEVS); + config.num_peers = __cpu_to_le32(TARGET_NUM_PEERS + TARGET_NUM_VDEVS); + config.num_peer_keys = __cpu_to_le32(TARGET_NUM_PEER_KEYS); + config.num_tids = __cpu_to_le32(TARGET_NUM_TIDS); + config.ast_skid_limit = __cpu_to_le32(TARGET_AST_SKID_LIMIT); + config.tx_chain_mask = __cpu_to_le32(TARGET_TX_CHAIN_MASK); + config.rx_chain_mask = __cpu_to_le32(TARGET_RX_CHAIN_MASK); + config.rx_timeout_pri_vo = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI); + config.rx_timeout_pri_vi = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI); + config.rx_timeout_pri_be = __cpu_to_le32(TARGET_RX_TIMEOUT_LO_PRI); + config.rx_timeout_pri_bk = __cpu_to_le32(TARGET_RX_TIMEOUT_HI_PRI); + config.rx_decap_mode = __cpu_to_le32(TARGET_RX_DECAP_MODE); + + config.scan_max_pending_reqs = + __cpu_to_le32(TARGET_SCAN_MAX_PENDING_REQS); + + config.bmiss_offload_max_vdev = + __cpu_to_le32(TARGET_BMISS_OFFLOAD_MAX_VDEV); + + config.roam_offload_max_vdev = + __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_VDEV); + + config.roam_offload_max_ap_profiles = + __cpu_to_le32(TARGET_ROAM_OFFLOAD_MAX_AP_PROFILES); + + config.num_mcast_groups = __cpu_to_le32(TARGET_NUM_MCAST_GROUPS); + config.num_mcast_table_elems = + __cpu_to_le32(TARGET_NUM_MCAST_TABLE_ELEMS); + + config.mcast2ucast_mode = __cpu_to_le32(TARGET_MCAST2UCAST_MODE); + config.tx_dbg_log_size = __cpu_to_le32(TARGET_TX_DBG_LOG_SIZE); + config.num_wds_entries = __cpu_to_le32(TARGET_NUM_WDS_ENTRIES); + config.dma_burst_size = __cpu_to_le32(TARGET_DMA_BURST_SIZE); + config.mac_aggr_delim = __cpu_to_le32(TARGET_MAC_AGGR_DELIM); + + val = TARGET_RX_SKIP_DEFRAG_TIMEOUT_DUP_DETECTION_CHECK; + config.rx_skip_defrag_timeout_dup_detection_check = __cpu_to_le32(val); + + config.vow_config = __cpu_to_le32(TARGET_VOW_CONFIG); + + config.num_msdu_desc = __cpu_to_le32(TARGET_NUM_MSDU_DESC); + config.max_frag_entries = __cpu_to_le32(TARGET_MAX_FRAG_ENTRIES); + + len = sizeof(*cmd) + + (sizeof(struct host_memory_chunk) * ar->wmi.num_mem_chunks); + + buf = ath10k_wmi_alloc_skb(len); + if (!buf) + return -ENOMEM; + + cmd = (struct wmi_init_cmd_10x *)buf->data; + + if (ar->wmi.num_mem_chunks == 0) { + cmd->num_host_mem_chunks = 0; + goto out; + } + + ath10k_dbg(ATH10K_DBG_WMI, "wmi sending %d memory chunks info.\n", + __cpu_to_le32(ar->wmi.num_mem_chunks)); + + cmd->num_host_mem_chunks = __cpu_to_le32(ar->wmi.num_mem_chunks); + + for (i = 0; i < ar->wmi.num_mem_chunks; i++) { + cmd->host_mem_chunks[i].ptr = + __cpu_to_le32(ar->wmi.mem_chunks[i].paddr); + cmd->host_mem_chunks[i].size = + __cpu_to_le32(ar->wmi.mem_chunks[i].len); + cmd->host_mem_chunks[i].req_id = + __cpu_to_le32(ar->wmi.mem_chunks[i].req_id); + + ath10k_dbg(ATH10K_DBG_WMI, + "wmi chunk %d len %d requested, addr 0x%x\n", + i, + cmd->host_mem_chunks[i].size, + cmd->host_mem_chunks[i].ptr); + } +out: + memcpy(&cmd->resource_config, &config, sizeof(config)); + + ath10k_dbg(ATH10K_DBG_WMI, "wmi init 10x\n"); + return ath10k_wmi_cmd_send(ar, buf, ar->wmi.cmd->init_cmdid); +} + +int ath10k_wmi_cmd_init(struct ath10k *ar) +{ + int ret; + + if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) + ret = ath10k_wmi_10x_cmd_init(ar); + else + ret = ath10k_wmi_main_cmd_init(ar); + + return ret; +} + static int ath10k_wmi_start_scan_calc_len(const struct wmi_start_scan_arg *arg) { int len; diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 1c515d68228..5383f7eddce 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -1377,6 +1377,189 @@ struct wmi_resource_config { __le32 max_frag_entries; } __packed; +struct wmi_resource_config_10x { + /* number of virtual devices (VAPs) to support */ + __le32 num_vdevs; + + /* number of peer nodes to support */ + __le32 num_peers; + + /* number of keys per peer */ + __le32 num_peer_keys; + + /* total number of TX/RX data TIDs */ + __le32 num_tids; + + /* + * max skid for resolving hash collisions + * + * The address search table is sparse, so that if two MAC addresses + * result in the same hash value, the second of these conflicting + * entries can slide to the next index in the address search table, + * and use it, if it is unoccupied. This ast_skid_limit parameter + * specifies the upper bound on how many subsequent indices to search + * over to find an unoccupied space. + */ + __le32 ast_skid_limit; + + /* + * the nominal chain mask for transmit + * + * The chain mask may be modified dynamically, e.g. to operate AP + * tx with a reduced number of chains if no clients are associated. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of tx chains. + */ + __le32 tx_chain_mask; + + /* + * the nominal chain mask for receive + * + * The chain mask may be modified dynamically, e.g. for a client + * to use a reduced number of chains for receive if the traffic to + * the client is low enough that it doesn't require downlink MIMO + * or antenna diversity. + * This configuration parameter specifies the nominal chain-mask that + * should be used when not operating with a reduced set of rx chains. + */ + __le32 rx_chain_mask; + + /* + * what rx reorder timeout (ms) to use for the AC + * + * Each WMM access class (voice, video, best-effort, background) will + * have its own timeout value to dictate how long to wait for missing + * rx MPDUs to arrive before flushing subsequent MPDUs that have + * already been received. + * This parameter specifies the timeout in milliseconds for each + * class. + */ + __le32 rx_timeout_pri_vi; + __le32 rx_timeout_pri_vo; + __le32 rx_timeout_pri_be; + __le32 rx_timeout_pri_bk; + + /* + * what mode the rx should decap packets to + * + * MAC can decap to RAW (no decap), native wifi or Ethernet types + * THis setting also determines the default TX behavior, however TX + * behavior can be modified on a per VAP basis during VAP init + */ + __le32 rx_decap_mode; + + /* what is the maximum scan requests than can be queued */ + __le32 scan_max_pending_reqs; + + /* maximum VDEV that could use BMISS offload */ + __le32 bmiss_offload_max_vdev; + + /* maximum VDEV that could use offload roaming */ + __le32 roam_offload_max_vdev; + + /* maximum AP profiles that would push to offload roaming */ + __le32 roam_offload_max_ap_profiles; + + /* + * how many groups to use for mcast->ucast conversion + * + * The target's WAL maintains a table to hold information regarding + * which peers belong to a given multicast group, so that if + * multicast->unicast conversion is enabled, the target can convert + * multicast tx frames to a series of unicast tx frames, to each + * peer within the multicast group. + This num_mcast_groups configuration parameter tells the target how + * many multicast groups to provide storage for within its multicast + * group membership table. + */ + __le32 num_mcast_groups; + + /* + * size to alloc for the mcast membership table + * + * This num_mcast_table_elems configuration parameter tells the + * target how many peer elements it needs to provide storage for in + * its multicast group membership table. + * These multicast group membership table elements are shared by the + * multicast groups stored within the table. + */ + __le32 num_mcast_table_elems; + + /* + * whether/how to do multicast->unicast conversion + * + * This configuration parameter specifies whether the target should + * perform multicast --> unicast conversion on transmit, and if so, + * what to do if it finds no entries in its multicast group + * membership table for the multicast IP address in the tx frame. + * Configuration value: + * 0 -> Do not perform multicast to unicast conversion. + * 1 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * drop the frame. + * 2 -> Convert multicast frames to unicast, if the IP multicast + * address from the tx frame is found in the multicast group + * membership table. If the IP multicast address is not found, + * transmit the frame as multicast. + */ + __le32 mcast2ucast_mode; + + /* + * how much memory to allocate for a tx PPDU dbg log + * + * This parameter controls how much memory the target will allocate + * to store a log of tx PPDU meta-information (how large the PPDU + * was, when it was sent, whether it was successful, etc.) + */ + __le32 tx_dbg_log_size; + + /* how many AST entries to be allocated for WDS */ + __le32 num_wds_entries; + + /* + * MAC DMA burst size, e.g., For target PCI limit can be + * 0 -default, 1 256B + */ + __le32 dma_burst_size; + + /* + * Fixed delimiters to be inserted after every MPDU to + * account for interface latency to avoid underrun. + */ + __le32 mac_aggr_delim; + + /* + * determine whether target is responsible for detecting duplicate + * non-aggregate MPDU and timing out stale fragments. + * + * A-MPDU reordering is always performed on the target. + * + * 0: target responsible for frag timeout and dup checking + * 1: host responsible for frag timeout and dup checking + */ + __le32 rx_skip_defrag_timeout_dup_detection_check; + + /* + * Configuration for VoW : + * No of Video Nodes to be supported + * and Max no of descriptors for each Video link (node). + */ + __le32 vow_config; + + /* Number of msdu descriptors target should use */ + __le32 num_msdu_desc; + + /* + * Max. number of Tx fragments per MSDU + * This parameter controls the max number of Tx fragments per MSDU. + * This is sent by the target as part of the WMI_SERVICE_READY event + * and is overriden by the OS shim as required. + */ + __le32 max_frag_entries; +} __packed; + + #define NUM_UNITS_IS_NUM_VDEVS 0x1 #define NUM_UNITS_IS_NUM_PEERS 0x2 @@ -1401,6 +1584,18 @@ struct wmi_init_cmd { struct host_memory_chunk host_mem_chunks[1]; } __packed; +/* _10x stucture is from 10.X FW API */ +struct wmi_init_cmd_10x { + struct wmi_resource_config_10x resource_config; + __le32 num_host_mem_chunks; + + /* + * variable number of host memory chunks. + * This should be the last element in the structure + */ + struct host_memory_chunk host_mem_chunks[1]; +} __packed; + /* TLV for channel list */ struct wmi_chan_list { __le32 tag; /* WMI_CHAN_LIST_TAG */