From: Mark Allyn Date: Fri, 4 Mar 2011 00:38:28 +0000 (-0800) Subject: staging: sep: remove unused ioctls X-Git-Tag: v2.6.39-rc1~469^2~247 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=1254a459a376962ba771618742af47c8a1b92a6e;p=~emulex%2Finfiniband.git staging: sep: remove unused ioctls Also remove associated functions, structures, and defines Signed-off-by: Mark Allyn Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/sep/TODO b/drivers/staging/sep/TODO index a89e7d6ad0c..8f3b878ad8a 100644 --- a/drivers/staging/sep/TODO +++ b/drivers/staging/sep/TODO @@ -1,6 +1,4 @@ Todo's so far (from Alan Cox) - Check whether it can be plugged into any of the kernel crypto API interfaces - Crypto API 'glue' is still not ready to submit -- Clean up unused ioctls - Needs vendor help -- Clean up unused fields in ioctl structures - Needs vendor help - Clean up un-needed debug prints - Started to work on this diff --git a/drivers/staging/sep/sep_dev.h b/drivers/staging/sep/sep_dev.h index 0ffe68cb714..696ab0dd2b7 100644 --- a/drivers/staging/sep/sep_dev.h +++ b/drivers/staging/sep/sep_dev.h @@ -69,31 +69,6 @@ struct sep_device { size_t shared_size; void *shared_addr; - /* restricted access region (coherent alloc) */ - dma_addr_t rar_bus; - size_t rar_size; - void *rar_addr; - - /* Firmware regions; cache is at rar for Moorestown and - resident is at rar for Medfield */ - dma_addr_t cache_bus; - size_t cache_size; - void *cache_addr; - - dma_addr_t resident_bus; - size_t resident_size; - void *resident_addr; - - /* sep's scratchpad */ - dma_addr_t dcache_bus; - size_t dcache_size; - void *dcache_addr; - - /* Only used on Medfield */ - dma_addr_t extapp_bus; - size_t extapp_size; - void *extapp_addr; - /* start address of the access to the SEP registers from driver */ dma_addr_t reg_physical_addr; dma_addr_t reg_physical_end; diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c index d841289c1fa..71a5fbc041e 100644 --- a/drivers/staging/sep/sep_driver.c +++ b/drivers/staging/sep/sep_driver.c @@ -76,93 +76,6 @@ static struct sep_device *sep_dev; -/** - * sep_load_firmware - copy firmware cache/resident - * @sep: pointer to struct sep_device we are loading - * - * This functions copies the cache and resident from their source - * location into destination shared memory. - */ -static int sep_load_firmware(struct sep_device *sep) -{ - const struct firmware *fw; - char *cache_name = "cache.image.bin"; - char *res_name = "resident.image.bin"; - char *extapp_name = "extapp.image.bin"; - int error ; - unsigned long work1, work2, work3; - - /* Set addresses and load resident */ - sep->resident_bus = sep->rar_bus; - sep->resident_addr = sep->rar_addr; - - error = request_firmware(&fw, res_name, &sep->pdev->dev); - if (error) { - dev_warn(&sep->pdev->dev, "can't request resident fw\n"); - return error; - } - - memcpy(sep->resident_addr, (void *)fw->data, fw->size); - sep->resident_size = fw->size; - release_firmware(fw); - - dev_dbg(&sep->pdev->dev, "resident bus is %lx\n", - (unsigned long)sep->resident_bus); - - /* Set addresses for dcache (no loading needed) */ - work1 = (unsigned long)sep->resident_bus; - work2 = (unsigned long)sep->resident_size; - work3 = (work1 + work2 + (1024 * 4)) & 0xfffff000; - sep->dcache_bus = (dma_addr_t)work3; - - work1 = (unsigned long)sep->resident_addr; - work2 = (unsigned long)sep->resident_size; - work3 = (work1 + work2 + (1024 * 4)) & 0xfffff000; - sep->dcache_addr = (void *)work3; - - sep->dcache_size = 1024 * 128; - - /* Set addresses and load cache */ - sep->cache_bus = sep->dcache_bus + sep->dcache_size; - sep->cache_addr = sep->dcache_addr + sep->dcache_size; - - error = request_firmware(&fw, cache_name, &sep->pdev->dev); - if (error) { - dev_warn(&sep->pdev->dev, "Unable to request cache firmware\n"); - return error; - } - - memcpy(sep->cache_addr, (void *)fw->data, fw->size); - sep->cache_size = fw->size; - release_firmware(fw); - - dev_dbg(&sep->pdev->dev, "cache bus is %08lx\n", - (unsigned long)sep->cache_bus); - - /* Set addresses and load extapp */ - sep->extapp_bus = sep->cache_bus + (1024 * 370); - sep->extapp_addr = sep->cache_addr + (1024 * 370); - - error = request_firmware(&fw, extapp_name, &sep->pdev->dev); - if (error) { - dev_warn(&sep->pdev->dev, "Unable to request extapp firmware\n"); - return error; - } - - memcpy(sep->extapp_addr, (void *)fw->data, fw->size); - sep->extapp_size = fw->size; - release_firmware(fw); - - dev_dbg(&sep->pdev->dev, "extapp bus is %08llx\n", - (unsigned long long)sep->extapp_bus); - - return error; -} - -MODULE_FIRMWARE("sep/cache.image.bin"); -MODULE_FIRMWARE("sep/resident.image.bin"); -MODULE_FIRMWARE("sep/extapp.image.bin"); - /** * sep_dump_message - dump the message that is pending * @sep: SEP device @@ -2282,58 +2195,6 @@ end_function: } - -/** - * sep_create_sync_dma_tables_handler - create sync DMA tables - * @sep: pointer to struct sep_device - * @arg: pointer to struct bld_syn_tab_struct - * - * Handle the request for creation of the DMA tables for the synchronic - * symmetric operations (AES,DES). Note that all bus addresses that are - * passed to the SEP are in 32 bit format; the SEP is a 32 bit device - */ -static int sep_create_sync_dma_tables_handler(struct sep_device *sep, - unsigned long arg) -{ - int error = 0; - - /* Command arguments */ - struct bld_syn_tab_struct command_args; - - if (copy_from_user(&command_args, (void __user *)arg, - sizeof(struct bld_syn_tab_struct))) { - error = -EFAULT; - goto end_function; - } - - dev_dbg(&sep->pdev->dev, "create dma table handler app_in_address is %08llx\n", - command_args.app_in_address); - dev_dbg(&sep->pdev->dev, "app_out_address is %08llx\n", - command_args.app_out_address); - dev_dbg(&sep->pdev->dev, "data_size is %u\n", - command_args.data_in_size); - dev_dbg(&sep->pdev->dev, "block_size is %u\n", - command_args.block_size); - - /* Validate user parameters */ - if (!command_args.app_in_address) { - error = -EINVAL; - goto end_function; - } - - error = sep_prepare_input_output_dma_table_in_dcb(sep, - (unsigned long)command_args.app_in_address, - (unsigned long)command_args.app_out_address, - command_args.data_in_size, - command_args.block_size, - 0x0, - false, - false); - -end_function: - return error; -} - /** * sep_free_dma_tables_and_dcb - free DMA tables and DCBs * @sep: pointer to struct sep_device @@ -2410,204 +2271,6 @@ static int sep_get_static_pool_addr_handler(struct sep_device *sep) return 0; } -/** - * sep_start_handler - start device - * @sep: pointer to struct sep_device - */ -static int sep_start_handler(struct sep_device *sep) -{ - unsigned long reg_val; - unsigned long error = 0; - - /* Wait in polling for message from SEP */ - do { - reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); - } while (!reg_val); - - /* Check the value */ - if (reg_val == 0x1) - /* Fatal error - read error status from GPRO */ - error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); - return error; -} - -/** - * ep_check_sum_calc - checksum messages - * @data: buffer to checksum - * @length: buffer size - * - * This function performs a checksum for messages that are sent - * to the SEP. - */ -static u32 sep_check_sum_calc(u8 *data, u32 length) -{ - u32 sum = 0; - u16 *Tdata = (u16 *)data; - - while (length > 1) { - /* This is the inner loop */ - sum += *Tdata++; - length -= 2; - } - - /* Add left-over byte, if any */ - if (length > 0) - sum += *(u8 *)Tdata; - - /* Fold 32-bit sum to 16 bits */ - while (sum>>16) - sum = (sum & 0xffff) + (sum >> 16); - - return ~sum & 0xFFFF; -} - -/** - * sep_init_handler - - * @sep: pointer to struct sep_device - * @arg: parameters from user space application - * - * Handles the request for SEP initialization - * Note that this will go away for Medfield once the SCU - * SEP initialization is complete - * Also note that the message to the SEP has components - * from user space as well as components written by the driver - * This is becuase the portions of the message that pertain to - * physical addresses must be set by the driver after the message - * leaves custody of the user space application for security - * reasons. - */ -static int sep_init_handler(struct sep_device *sep, unsigned long arg) -{ - u32 message_buff[14]; - u32 counter; - int error = 0; - u32 reg_val; - dma_addr_t new_base_addr; - unsigned long addr_hold; - struct init_struct command_args; - - /* Make sure that we have not initialized already */ - reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); - - if (reg_val != 0x2) { - error = SEP_ALREADY_INITIALIZED_ERR; - dev_dbg(&sep->pdev->dev, "init; device already initialized\n"); - goto end_function; - } - - /* Only root can initialize */ - if (!capable(CAP_SYS_ADMIN)) { - error = -EACCES; - goto end_function; - } - - /* Copy in the parameters */ - error = copy_from_user(&command_args, (void __user *)arg, - sizeof(struct init_struct)); - - if (error) { - error = -EFAULT; - goto end_function; - } - - /* Validate parameters */ - if (!command_args.message_addr || !command_args.sep_sram_addr || - command_args.message_size_in_words > 14) { - error = -EINVAL; - goto end_function; - } - - /* Copy in the SEP init message */ - addr_hold = (unsigned long)command_args.message_addr; - error = copy_from_user(message_buff, - (void __user *)addr_hold, - command_args.message_size_in_words*sizeof(u32)); - - if (error) { - error = -EFAULT; - goto end_function; - } - - /* Load resident, cache, and extapp firmware */ - error = sep_load_firmware(sep); - - if (error) { - dev_warn(&sep->pdev->dev, - "init; copy SEP init message failed %x\n", error); - goto end_function; - } - - /* Compute the base address */ - new_base_addr = sep->shared_bus; - - if (sep->resident_bus < new_base_addr) - new_base_addr = sep->resident_bus; - - if (sep->cache_bus < new_base_addr) - new_base_addr = sep->cache_bus; - - if (sep->dcache_bus < new_base_addr) - new_base_addr = sep->dcache_bus; - - /* Put physical addresses in SEP message */ - message_buff[3] = (u32)new_base_addr; - message_buff[4] = (u32)sep->shared_bus; - message_buff[6] = (u32)sep->resident_bus; - message_buff[7] = (u32)sep->cache_bus; - message_buff[8] = (u32)sep->dcache_bus; - - message_buff[command_args.message_size_in_words - 1] = 0x0; - message_buff[command_args.message_size_in_words - 1] = - sep_check_sum_calc((u8 *)message_buff, - command_args.message_size_in_words*sizeof(u32)); - - /* Debug print of message */ - for (counter = 0; counter < command_args.message_size_in_words; - counter++) - dev_dbg(&sep->pdev->dev, "init; SEP message word %d is %x\n", - counter, message_buff[counter]); - - /* Tell the SEP the sram address */ - sep_write_reg(sep, HW_SRAM_ADDR_REG_ADDR, command_args.sep_sram_addr); - - /* Push the message to the SEP */ - for (counter = 0; counter < command_args.message_size_in_words; - counter++) { - sep_write_reg(sep, HW_SRAM_DATA_REG_ADDR, - message_buff[counter]); - sep_wait_sram_write(sep); - } - - /* Signal SEP that message is ready and to init */ - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x1); - - /* Wait for acknowledge */ - - do { - reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); - } while (!(reg_val & 0xFFFFFFFD)); - - if (reg_val == 0x1) { - dev_warn(&sep->pdev->dev, "init; device int failed\n"); - error = sep_read_reg(sep, 0x8060); - dev_warn(&sep->pdev->dev, "init; sw monitor is %x\n", error); - error = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR0_REG_ADDR); - dev_warn(&sep->pdev->dev, "init; error is %x\n", error); - goto end_function; - } - /* Signal SEP to zero the GPR3 */ - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x10); - - /* Wait for response */ - - do { - reg_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); - } while (reg_val != 0); - -end_function: - return error; -} - /** * sep_end_transaction_handler - end transaction * @sep: pointer to struct sep_device @@ -2747,30 +2410,6 @@ end_function: return error; } -/** - * sep_realloc_ext_cache_handler - report location of extcache - * @sep: pointer to struct sep_device - * @arg: pointer to user parameters - * - * This function tells the SEP where the extapp is located - */ -static int sep_realloc_ext_cache_handler(struct sep_device *sep, - unsigned long arg) -{ - /* Holds the new ext cache address in the system memory offset */ - u32 *system_addr; - - /* Set value in the SYSTEM MEMORY offset */ - system_addr = (u32 *)(sep->shared_addr + - SEP_DRIVER_SYSTEM_EXT_CACHE_ADDR_OFFSET_IN_BYTES); - - /* Copy the physical address to the System Area for the SEP */ - system_addr[0] = SEP_EXT_CACHE_ADDR_VAL_TOKEN; - system_addr[1] = sep->extapp_bus; - - return 0; -} - /** * sep_ioctl - ioctl api * @filp: pointer to struct file @@ -2810,28 +2449,6 @@ static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) /* Allocate data pool */ error = sep_allocate_data_pool_memory_handler(sep, arg); break; - case SEP_IOCCREATESYMDMATABLE: - /* Create DMA table for synhronic operation */ - error = sep_create_sync_dma_tables_handler(sep, arg); - break; - case SEP_IOCFREEDMATABLEDATA: - /* Free the pages */ - error = sep_free_dma_table_data_handler(sep); - break; - case SEP_IOCSEPSTART: - /* Start command to SEP */ - if (sep->pdev->revision == 0) /* Only for old chip */ - error = sep_start_handler(sep); - else - error = -EPERM; /* Not permitted on new chip */ - break; - case SEP_IOCSEPINIT: - /* Init command to SEP */ - if (sep->pdev->revision == 0) /* Only for old chip */ - error = sep_init_handler(sep, arg); - else - error = -EPERM; /* Not permitted on new chip */ - break; case SEP_IOCGETSTATICPOOLADDR: /* Inform the SEP the bus address of the static pool */ error = sep_get_static_pool_addr_handler(sep); @@ -2839,12 +2456,6 @@ static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) case SEP_IOCENDTRANSACTION: error = sep_end_transaction_handler(sep); break; - case SEP_IOCREALLOCEXTCACHE: - if (sep->pdev->revision == 0) /* Only for old chip */ - error = sep_realloc_ext_cache_handler(sep, arg); - else - error = -EPERM; /* Not permitted on new chip */ - break; case SEP_IOCRARPREPAREMESSAGE: error = sep_rar_prepare_output_msg_handler(sep, arg); break; @@ -3213,20 +2824,6 @@ static int __devinit sep_probe(struct pci_dev *pdev, goto end_function_error; } - sep->rar_size = FAKE_RAR_SIZE; - sep->rar_addr = dma_alloc_coherent(&sep->pdev->dev, - sep->rar_size, &sep->rar_bus, GFP_KERNEL); - if (sep->rar_addr == NULL) { - dev_warn(&sep->pdev->dev, "can't allocate mfld rar\n"); - error = -ENOMEM; - goto end_function_deallocate_sep_shared_area; - } - - dev_dbg(&sep->pdev->dev, "rar start is %p, phy is %llx," - " size is %zx\n", sep->rar_addr, - (unsigned long long)sep->rar_bus, - sep->rar_size); - /* Clear ICR register */ sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF); @@ -3243,7 +2840,7 @@ static int __devinit sep_probe(struct pci_dev *pdev, "sep_driver", sep); if (error) - goto end_function_dealloc_rar; + goto end_function_deallocate_sep_shared_area; /* The new chip requires a shared area reconfigure */ if (sep->pdev->revision == 4) { /* Only for new chip */ @@ -3261,12 +2858,6 @@ static int __devinit sep_probe(struct pci_dev *pdev, end_function_free_irq: free_irq(pdev->irq, sep); -end_function_dealloc_rar: - if (sep->rar_addr) - dma_free_coherent(&sep->pdev->dev, sep->rar_size, - sep->rar_addr, sep->rar_bus); - goto end_function; - end_function_deallocate_sep_shared_area: /* De-allocate shared area */ sep_unmap_and_free_shared_area(sep); diff --git a/drivers/staging/sep/sep_driver_api.h b/drivers/staging/sep/sep_driver_api.h index 0f38d619842..c3aacfcc8ac 100644 --- a/drivers/staging/sep/sep_driver_api.h +++ b/drivers/staging/sep/sep_driver_api.h @@ -42,48 +42,6 @@ TYPEDEFS ----------------------------------------------*/ -/* - * Note that several members of these structres are only here - * for campatability with the middleware; they are not used - * by this driver. - * All user space buffer addresses are set to aligned u64 - * in order to ensure compatibility with 64 bit systems - */ - -/* - init command struct; this will go away when SCU does init -*/ -struct init_struct { - /* address that SEP can access for message */ - aligned_u64 message_addr; - - /* message size */ - u32 message_size_in_words; - - /* offset of the init message in the sep sram */ - u32 sep_sram_addr; - - /* -not used- resident size in bytes*/ - u32 unused_resident_size_in_bytes; - - /* -not used- cache size in bytes*/ - u32 unused_cache_size_in_bytes; - - /* -not used- ext cache current address */ - aligned_u64 unused_extcache_addr; - - /* -not used- ext cache size in bytes*/ - u32 unused_extcache_size_in_bytes; -}; - -struct realloc_ext_struct { - /* -not used- current external cache address */ - aligned_u64 unused_ext_cache_addr; - - /* -not used- external cache size in bytes*/ - u32 unused_ext_cache_size_in_bytes; -}; - struct alloc_struct { /* offset from start of shared pool area */ u32 offset; @@ -91,29 +49,6 @@ struct alloc_struct { u32 num_bytes; }; -/* - Note that all app addresses are cast as u32; the sep - middleware sends them as fixed 32 bit words -*/ -struct bld_syn_tab_struct { - /* address value of the data in (user space addr) */ - aligned_u64 app_in_address; - - /* size of data in */ - u32 data_in_size; - - /* address of the data out (user space addr) */ - aligned_u64 app_out_address; - - /* the size of the block of the operation - if needed, - every table will be modulo this parameter */ - u32 block_size; - - /* -not used- distinct user/kernel layout */ - bool isKernelVirtualAddress; - -}; - /* command struct for getting caller id value and address */ struct caller_id_struct { /* pid of the process */ @@ -253,10 +188,6 @@ struct sep_lli_entry { #define SEP_IOCALLOCDATAPOLL \ _IOW(SEP_IOC_MAGIC_NUMBER, 2, struct alloc_struct) -/* create sym dma lli tables */ -#define SEP_IOCCREATESYMDMATABLE \ - _IOW(SEP_IOC_MAGIC_NUMBER, 5, struct bld_syn_tab_struct) - /* free dynamic data aalocated during table creation */ #define SEP_IOCFREEDMATABLEDATA \ _IO(SEP_IOC_MAGIC_NUMBER, 7) @@ -265,23 +196,10 @@ struct sep_lli_entry { #define SEP_IOCGETSTATICPOOLADDR \ _IO(SEP_IOC_MAGIC_NUMBER, 8) -/* start sep command */ -#define SEP_IOCSEPSTART \ - _IO(SEP_IOC_MAGIC_NUMBER, 12) - -/* init sep command */ -#define SEP_IOCSEPINIT \ - _IOW(SEP_IOC_MAGIC_NUMBER, 13, struct init_struct) - /* end transaction command */ #define SEP_IOCENDTRANSACTION \ _IO(SEP_IOC_MAGIC_NUMBER, 15) -/* reallocate external app; unused structure still needed for - * compatability with middleware */ -#define SEP_IOCREALLOCEXTCACHE \ - _IOW(SEP_IOC_MAGIC_NUMBER, 18, struct realloc_ext_struct) - #define SEP_IOCRARPREPAREMESSAGE \ _IOW(SEP_IOC_MAGIC_NUMBER, 20, struct rar_hndl_to_bus_struct)