From: Johannes Berg <johannes.berg@intel.com>
Date: Mon, 18 Jun 2012 08:17:12 +0000 (+0200)
Subject: iwlwifi: use minimal time for radio reset scan
X-Git-Tag: v3.6-rc1~125^2~57^2~286^2~1
X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=0d4e07726ea468c0f9bb7f84b02a9f1bfd16b69e;p=~emulex%2Finfiniband.git

iwlwifi: use minimal time for radio reset scan

The effect of using a short single-channel scan
to reset the radio is that scanning a channel
that isn't in use needs to re-tune the radio.
This means that the dwell time is irrelevant,
so use a shorter time.

While at it, clean up the code for this a bit.

Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
---

diff --git a/drivers/net/wireless/iwlwifi/dvm/scan.c b/drivers/net/wireless/iwlwifi/dvm/scan.c
index 2f271c96ed3..f5b1452a60b 100644
--- a/drivers/net/wireless/iwlwifi/dvm/scan.c
+++ b/drivers/net/wireless/iwlwifi/dvm/scan.c
@@ -51,6 +51,9 @@
 #define IWL_CHANNEL_TUNE_TIME       5
 #define MAX_SCAN_CHANNEL	    50
 
+/* For reset radio, need minimal dwell time only */
+#define IWL_RADIO_RESET_DWELL_TIME	5
+
 static int iwl_send_scan_abort(struct iwl_priv *priv)
 {
 	int ret;
@@ -469,45 +472,39 @@ static u8 iwl_get_single_channel_number(struct iwl_priv *priv,
 	return 0;
 }
 
-static int iwl_get_single_channel_for_scan(struct iwl_priv *priv,
-					   struct ieee80211_vif *vif,
-					   enum ieee80211_band band,
-					   struct iwl_scan_channel *scan_ch)
+static int iwl_get_channel_for_reset_scan(struct iwl_priv *priv,
+					  struct ieee80211_vif *vif,
+					  enum ieee80211_band band,
+					  struct iwl_scan_channel *scan_ch)
 {
 	const struct ieee80211_supported_band *sband;
-	u16 passive_dwell = 0;
-	u16 active_dwell = 0;
-	int added = 0;
-	u16 channel = 0;
+	u16 channel;
 
 	sband = iwl_get_hw_mode(priv, band);
 	if (!sband) {
 		IWL_ERR(priv, "invalid band\n");
-		return added;
+		return 0;
 	}
 
-	active_dwell = iwl_get_active_dwell_time(priv, band, 0);
-	passive_dwell = iwl_get_passive_dwell_time(priv, band);
-
-	if (passive_dwell <= active_dwell)
-		passive_dwell = active_dwell + 1;
-
 	channel = iwl_get_single_channel_number(priv, band);
 	if (channel) {
 		scan_ch->channel = cpu_to_le16(channel);
 		scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
-		scan_ch->active_dwell = cpu_to_le16(active_dwell);
-		scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+		scan_ch->active_dwell =
+			cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
+		scan_ch->passive_dwell =
+			cpu_to_le16(IWL_RADIO_RESET_DWELL_TIME);
 		/* Set txpower levels to defaults */
 		scan_ch->dsp_atten = 110;
 		if (band == IEEE80211_BAND_5GHZ)
 			scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
 		else
 			scan_ch->tx_gain = ((1 << 5) | (5 << 3));
-		added++;
-	} else
-		IWL_ERR(priv, "no valid channel found\n");
-	return added;
+		return 1;
+	}
+
+	IWL_ERR(priv, "no valid channel found\n");
+	return 0;
 }
 
 static int iwl_get_channels_for_scan(struct iwl_priv *priv,
@@ -896,7 +893,7 @@ static int iwlagn_request_scan(struct iwl_priv *priv, struct ieee80211_vif *vif)
 	switch (priv->scan_type) {
 	case IWL_SCAN_RADIO_RESET:
 		scan->channel_count =
-			iwl_get_single_channel_for_scan(priv, vif, band,
+			iwl_get_channel_for_reset_scan(priv, vif, band,
 				(void *)&scan->data[cmd_len]);
 		break;
 	case IWL_SCAN_NORMAL: