From: Manuel Lauss Date: Sun, 4 Oct 2009 12:55:29 +0000 (+0200) Subject: MIPS: Alchemy: XXS1500 PCMCIA driver rewrite X-Git-Tag: v2.6.34-rc1~269^2~134 X-Git-Url: https://openfabrics.org/gitweb/?a=commitdiff_plain;h=0273b4efccd3bc2b2ef5ea9778e71d8efbbb7ac7;p=~emulex%2Finfiniband.git MIPS: Alchemy: XXS1500 PCMCIA driver rewrite Rewritten XXS1500 PCMCIA socket driver, standalone (doesn't depend on au1000_generic.c) and added carddetect IRQ support. Signed-off-by: Manuel Lauss Cc: Florian Fainelli Cc: Linux-PCMCIA Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/alchemy/xxs1500/Makefile b/arch/mips/alchemy/xxs1500/Makefile index 545d8f5496e..68671c2f372 100644 --- a/arch/mips/alchemy/xxs1500/Makefile +++ b/arch/mips/alchemy/xxs1500/Makefile @@ -5,4 +5,4 @@ # Makefile for MyCable XXS1500 board. # -lib-y := init.o board_setup.o +lib-y := init.o board_setup.o platform.o diff --git a/arch/mips/alchemy/xxs1500/board_setup.c b/arch/mips/alchemy/xxs1500/board_setup.c index cad14f8a7c2..eb31350d977 100644 --- a/arch/mips/alchemy/xxs1500/board_setup.c +++ b/arch/mips/alchemy/xxs1500/board_setup.c @@ -69,22 +69,6 @@ void __init board_setup(void) /* Enable DTR = USB power up */ au_writel(0x01, UART3_ADDR + UART_MCR); /* UART_MCR_DTR is 0x01??? */ -#ifdef CONFIG_PCMCIA_XXS1500 - /* GPIO 0, 1, and 4 are inputs */ - alchemy_gpio_direction_input(0); - alchemy_gpio_direction_input(1); - alchemy_gpio_direction_input(4); - - /* GPIO2 208/9/10/11 are inputs */ - alchemy_gpio_direction_input(208); - alchemy_gpio_direction_input(209); - alchemy_gpio_direction_input(210); - alchemy_gpio_direction_input(211); - - /* Turn off power */ - alchemy_gpio_direction_output(214, 0); -#endif - #ifdef CONFIG_PCI #if defined(__MIPSEB__) au_writel(0xf | (2 << 6) | (1 << 4), Au1500_PCI_CFG); diff --git a/arch/mips/alchemy/xxs1500/platform.c b/arch/mips/alchemy/xxs1500/platform.c new file mode 100644 index 00000000000..c14dcaa9531 --- /dev/null +++ b/arch/mips/alchemy/xxs1500/platform.c @@ -0,0 +1,63 @@ +/* + * XXS1500 board platform device registration + * + * Copyright (C) 2009 Manuel Lauss + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include +#include + +#include + +static struct resource xxs1500_pcmcia_res[] = { + { + .name = "pseudo-io", + .flags = IORESOURCE_MEM, + .start = PCMCIA_IO_PSEUDO_PHYS, + .end = PCMCIA_IO_PSEUDO_PHYS + 0x00040000 - 1, + }, + { + .name = "pseudo-attr", + .flags = IORESOURCE_MEM, + .start = PCMCIA_ATTR_PSEUDO_PHYS, + .end = PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1, + }, + { + .name = "pseudo-mem", + .flags = IORESOURCE_MEM, + .start = PCMCIA_IO_PSEUDO_PHYS, + .end = PCMCIA_IO_PSEUDO_PHYS + 0x00040000 - 1, + }, +}; + +static struct platform_device xxs1500_pcmcia_dev = { + .name = "xxs1500_pcmcia", + .id = -1, + .num_resources = ARRAY_SIZE(xxs1500_pcmcia_res), + .resource = xxs1500_pcmcia_res, +}; + +static struct platform_device *xxs1500_devs[] __initdata = { + &xxs1500_pcmcia_dev, +}; + +static int __init xxs1500_dev_init(void) +{ + return platform_add_devices(xxs1500_devs, + ARRAY_SIZE(xxs1500_devs)); +} +device_initcall(xxs1500_dev_init); diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index 7c16d35679a..1e01578a0a7 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -185,6 +185,16 @@ config PCMCIA_ALCHEMY_DEVBOARD This driver is also available as a module called db1xxx_ss.ko +config PCMCIA_XXS1500 + tristate "MyCable XXS1500 PCMCIA socket support" + depends on PCMCIA && MIPS_XXS1500 + select 64BIT_PHYS_ADDR + help + Support for the PCMCIA/CF socket interface on MyCable XXS1500 + systems. + + This driver is also available as a module called xxs1500_ss.ko + config PCMCIA_BCM63XX tristate "bcm63xx pcmcia support" depends on BCM63XX && PCMCIA diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index f128d71c74c..21ee96448b1 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -39,7 +39,6 @@ obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o au1x00_ss-y += au1000_generic.o au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o -au1x00_ss-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o sa1111_cs-y += sa1111_generic.o sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1100_neponset.o @@ -69,3 +68,5 @@ pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y) + +obj-$(CONFIG_PCMCIA_XXS1500) += xxs1500_ss.o diff --git a/drivers/pcmcia/au1000_xxs1500.c b/drivers/pcmcia/au1000_xxs1500.c deleted file mode 100644 index b43d47b5081..00000000000 --- a/drivers/pcmcia/au1000_xxs1500.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * - * MyCable board specific pcmcia routines. - * - * Copyright 2003 MontaVista Software Inc. - * Author: Pete Popov, MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#define PCMCIA_MAX_SOCK 0 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) -#define PCMCIA_IRQ AU1000_GPIO_4 - -#if 0 -#define DEBUG(x, args...) printk(__func__ ": " x, ##args) -#else -#define DEBUG(x,args...) -#endif - -static int xxs1500_pcmcia_init(struct pcmcia_init *init) -{ - return PCMCIA_NUM_SOCKS; -} - -static int xxs1500_pcmcia_shutdown(void) -{ - /* turn off power */ - au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30), - GPIO2_OUTPUT); - au_sync_delay(100); - - /* assert reset */ - au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20), - GPIO2_OUTPUT); - au_sync_delay(100); - return 0; -} - - -static int -xxs1500_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) -{ - u32 inserted; u32 vs; - unsigned long gpio, gpio2; - - if(sock > PCMCIA_MAX_SOCK) return -1; - - gpio = au_readl(SYS_PINSTATERD); - gpio2 = au_readl(GPIO2_PINSTATE); - - vs = gpio2 & ((1<<8) | (1<<9)); - inserted = (!(gpio & 0x1) && !(gpio & 0x2)); - - state->ready = 0; - state->vs_Xv = 0; - state->vs_3v = 0; - state->detect = 0; - - if (inserted) { - switch (vs) { - case 0: - case 1: - case 2: - state->vs_3v=1; - break; - case 3: /* 5V */ - default: - /* return without setting 'detect' */ - printk(KERN_ERR "au1x00_cs: unsupported VS\n", - vs); - return; - } - state->detect = 1; - } - - if (state->detect) { - state->ready = 1; - } - - state->bvd1= gpio2 & (1<<10); - state->bvd2 = gpio2 & (1<<11); - state->wrprot=0; - return 1; -} - - -static int xxs1500_pcmcia_get_irq_info(struct pcmcia_irq_info *info) -{ - - if(info->sock > PCMCIA_MAX_SOCK) return -1; - info->irq = PCMCIA_IRQ; - return 0; -} - - -static int -xxs1500_pcmcia_configure_socket(const struct pcmcia_configure *configure) -{ - - if(configure->sock > PCMCIA_MAX_SOCK) return -1; - - DEBUG("Vcc %dV Vpp %dV, reset %d\n", - configure->vcc, configure->vpp, configure->reset); - - switch(configure->vcc){ - case 33: /* Vcc 3.3V */ - /* turn on power */ - DEBUG("turn on power\n"); - au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30), - GPIO2_OUTPUT); - au_sync_delay(100); - break; - case 50: /* Vcc 5V */ - default: /* what's this ? */ - printk(KERN_ERR "au1x00_cs: unsupported VCC\n"); - case 0: /* Vcc 0 */ - /* turn off power */ - au_sync_delay(100); - au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30), - GPIO2_OUTPUT); - break; - } - - if (!configure->reset) { - DEBUG("deassert reset\n"); - au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<4))|(1<<20), - GPIO2_OUTPUT); - au_sync_delay(100); - au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<5))|(1<<21), - GPIO2_OUTPUT); - } - else { - DEBUG("assert reset\n"); - au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20), - GPIO2_OUTPUT); - } - au_sync_delay(100); - return 0; -} - -struct pcmcia_low_level xxs1500_pcmcia_ops = { - xxs1500_pcmcia_init, - xxs1500_pcmcia_shutdown, - xxs1500_pcmcia_socket_state, - xxs1500_pcmcia_get_irq_info, - xxs1500_pcmcia_configure_socket -}; diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c new file mode 100644 index 00000000000..4e36930b51c --- /dev/null +++ b/drivers/pcmcia/xxs1500_ss.c @@ -0,0 +1,357 @@ +/* + * PCMCIA socket code for the MyCable XXS1500 system. + * + * Copyright (c) 2009 Manuel Lauss + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#define MEM_MAP_SIZE 0x400000 +#define IO_MAP_SIZE 0x1000 + + +/* + * 3.3V cards only; all interfacing is done via gpios: + * + * 0/1: carddetect (00 = card present, xx = huh) + * 4: card irq + * 204: reset (high-act) + * 205: buffer enable (low-act) + * 208/209: card voltage key (00,01,10,11) + * 210: battwarn + * 211: batdead + * 214: power (low-act) + */ +#define GPIO_CDA 0 +#define GPIO_CDB 1 +#define GPIO_CARDIRQ 4 +#define GPIO_RESET 204 +#define GPIO_OUTEN 205 +#define GPIO_VSL 208 +#define GPIO_VSH 209 +#define GPIO_BATTDEAD 210 +#define GPIO_BATTWARN 211 +#define GPIO_POWER 214 + +struct xxs1500_pcmcia_sock { + struct pcmcia_socket socket; + void *virt_io; + + /* the "pseudo" addresses of the PCMCIA space. */ + unsigned long phys_io; + unsigned long phys_attr; + unsigned long phys_mem; + + /* previous flags for set_socket() */ + unsigned int old_flags; +}; + +#define to_xxs_socket(x) container_of(x, struct xxs1500_pcmcia_sock, socket) + +static irqreturn_t cdirq(int irq, void *data) +{ + struct xxs1500_pcmcia_sock *sock = data; + + pcmcia_parse_events(&sock->socket, SS_DETECT); + + return IRQ_HANDLED; +} + +static int xxs1500_pcmcia_configure(struct pcmcia_socket *skt, + struct socket_state_t *state) +{ + struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt); + unsigned int changed; + + /* power control */ + switch (state->Vcc) { + case 0: + gpio_set_value(GPIO_POWER, 1); /* power off */ + break; + case 33: + gpio_set_value(GPIO_POWER, 0); /* power on */ + break; + case 50: + default: + return -EINVAL; + } + + changed = state->flags ^ sock->old_flags; + + if (changed & SS_RESET) { + if (state->flags & SS_RESET) { + gpio_set_value(GPIO_RESET, 1); /* assert reset */ + gpio_set_value(GPIO_OUTEN, 1); /* buffers off */ + } else { + gpio_set_value(GPIO_RESET, 0); /* deassert reset */ + gpio_set_value(GPIO_OUTEN, 0); /* buffers on */ + msleep(500); + } + } + + sock->old_flags = state->flags; + + return 0; +} + +static int xxs1500_pcmcia_get_status(struct pcmcia_socket *skt, + unsigned int *value) +{ + unsigned int status; + int i; + + status = 0; + + /* check carddetects: GPIO[0:1] must both be low */ + if (!gpio_get_value(GPIO_CDA) && !gpio_get_value(GPIO_CDB)) + status |= SS_DETECT; + + /* determine card voltage: GPIO[208:209] binary value */ + i = (!!gpio_get_value(GPIO_VSL)) | ((!!gpio_get_value(GPIO_VSH)) << 1); + + switch (i) { + case 0: + case 1: + case 2: + status |= SS_3VCARD; /* 3V card */ + break; + case 3: /* 5V card, unsupported */ + default: + status |= SS_XVCARD; /* treated as unsupported in core */ + } + + /* GPIO214: low active power switch */ + status |= gpio_get_value(GPIO_POWER) ? 0 : SS_POWERON; + + /* GPIO204: high-active reset line */ + status |= gpio_get_value(GPIO_RESET) ? SS_RESET : SS_READY; + + /* other stuff */ + status |= gpio_get_value(GPIO_BATTDEAD) ? 0 : SS_BATDEAD; + status |= gpio_get_value(GPIO_BATTWARN) ? 0 : SS_BATWARN; + + *value = status; + + return 0; +} + +static int xxs1500_pcmcia_sock_init(struct pcmcia_socket *skt) +{ + gpio_direction_input(GPIO_CDA); + gpio_direction_input(GPIO_CDB); + gpio_direction_input(GPIO_VSL); + gpio_direction_input(GPIO_VSH); + gpio_direction_input(GPIO_BATTDEAD); + gpio_direction_input(GPIO_BATTWARN); + gpio_direction_output(GPIO_RESET, 1); /* assert reset */ + gpio_direction_output(GPIO_OUTEN, 1); /* disable buffers */ + gpio_direction_output(GPIO_POWER, 1); /* power off */ + + return 0; +} + +static int xxs1500_pcmcia_sock_suspend(struct pcmcia_socket *skt) +{ + return 0; +} + +static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt, + struct pccard_io_map *map) +{ + struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt); + + map->start = (u32)sock->virt_io; + map->stop = map->start + IO_MAP_SIZE; + + return 0; +} + +static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt, + struct pccard_mem_map *map) +{ + struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt); + + if (map->flags & MAP_ATTRIB) + map->static_start = sock->phys_attr + map->card_start; + else + map->static_start = sock->phys_mem + map->card_start; + + return 0; +} + +static struct pccard_operations xxs1500_pcmcia_operations = { + .init = xxs1500_pcmcia_sock_init, + .suspend = xxs1500_pcmcia_sock_suspend, + .get_status = xxs1500_pcmcia_get_status, + .set_socket = xxs1500_pcmcia_configure, + .set_io_map = au1x00_pcmcia_set_io_map, + .set_mem_map = au1x00_pcmcia_set_mem_map, +}; + +static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev) +{ + struct xxs1500_pcmcia_sock *sock; + struct resource *r; + phys_t physio; + int ret, irq; + + sock = kzalloc(sizeof(struct xxs1500_pcmcia_sock), GFP_KERNEL); + if (!sock) + return -ENOMEM; + + ret = -ENODEV; + + /* + * pseudo-attr: The 32bit address of the PCMCIA attribute space + * for this socket (usually the 36bit address shifted 4 to the + * right). + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-attr"); + if (!r) { + dev_err(&pdev->dev, "missing 'pseudo-attr' resource!\n"); + goto out0; + } + sock->phys_attr = r->start; + + /* + * pseudo-mem: The 32bit address of the PCMCIA memory space for + * this socket (usually the 36bit address shifted 4 to the right) + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-mem"); + if (!r) { + dev_err(&pdev->dev, "missing 'pseudo-mem' resource!\n"); + goto out0; + } + sock->phys_mem = r->start; + + /* + * pseudo-io: The 32bit address of the PCMCIA IO space for this + * socket (usually the 36bit address shifted 4 to the right). + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pseudo-io"); + if (!r) { + dev_err(&pdev->dev, "missing 'pseudo-io' resource!\n"); + goto out0; + } + sock->phys_io = r->start; + + + /* for io must remap the full 36bit address (for reference see + * alchemy/common/setup.c::__fixup_bigphys_addr) + */ + physio = ((phys_t)sock->phys_io) << 4; + + /* + * PCMCIA client drivers use the inb/outb macros to access + * the IO registers. Since mips_io_port_base is added + * to the access address of the mips implementation of + * inb/outb, we need to subtract it here because we want + * to access the I/O or MEM address directly, without + * going through this "mips_io_port_base" mechanism. + */ + sock->virt_io = (void *)(ioremap(physio, IO_MAP_SIZE) - + mips_io_port_base); + + if (!sock->virt_io) { + dev_err(&pdev->dev, "cannot remap IO area\n"); + ret = -ENOMEM; + goto out0; + } + + sock->socket.ops = &xxs1500_pcmcia_operations; + sock->socket.owner = THIS_MODULE; + sock->socket.pci_irq = gpio_to_irq(GPIO_CARDIRQ); + sock->socket.features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD; + sock->socket.map_size = MEM_MAP_SIZE; + sock->socket.io_offset = (unsigned long)sock->virt_io; + sock->socket.dev.parent = &pdev->dev; + sock->socket.resource_ops = &pccard_static_ops; + + platform_set_drvdata(pdev, sock); + + /* setup carddetect irq: use one of the 2 GPIOs as an + * edge detector. + */ + irq = gpio_to_irq(GPIO_CDA); + set_irq_type(irq, IRQ_TYPE_EDGE_BOTH); + ret = request_irq(irq, cdirq, 0, "pcmcia_carddetect", sock); + if (ret) { + dev_err(&pdev->dev, "cannot setup cd irq\n"); + goto out1; + } + + ret = pcmcia_register_socket(&sock->socket); + if (ret) { + dev_err(&pdev->dev, "failed to register\n"); + goto out2; + } + + printk(KERN_INFO "MyCable XXS1500 PCMCIA socket services\n"); + + return 0; + +out2: + free_irq(gpio_to_irq(GPIO_CDA), sock); +out1: + iounmap((void *)(sock->virt_io + (u32)mips_io_port_base)); +out0: + kfree(sock); + return ret; +} + +static int __devexit xxs1500_pcmcia_remove(struct platform_device *pdev) +{ + struct xxs1500_pcmcia_sock *sock = platform_get_drvdata(pdev); + + pcmcia_unregister_socket(&sock->socket); + free_irq(gpio_to_irq(GPIO_CDA), sock); + iounmap((void *)(sock->virt_io + (u32)mips_io_port_base)); + kfree(sock); + + return 0; +} + +static struct platform_driver xxs1500_pcmcia_socket_driver = { + .driver = { + .name = "xxs1500_pcmcia", + .owner = THIS_MODULE, + }, + .probe = xxs1500_pcmcia_probe, + .remove = __devexit_p(xxs1500_pcmcia_remove), +}; + +int __init xxs1500_pcmcia_socket_load(void) +{ + return platform_driver_register(&xxs1500_pcmcia_socket_driver); +} + +void __exit xxs1500_pcmcia_socket_unload(void) +{ + platform_driver_unregister(&xxs1500_pcmcia_socket_driver); +} + +module_init(xxs1500_pcmcia_socket_load); +module_exit(xxs1500_pcmcia_socket_unload); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("PCMCIA Socket Services for MyCable XXS1500 systems"); +MODULE_AUTHOR("Manuel Lauss");