]> git.openfabrics.org - ~emulex/infiniband.git/commitdiff
fb: backlight: HX8357: Add HX8369 support
authorAlexandre Belloni <alexandre.belloni@free-electrons.com>
Thu, 1 Aug 2013 08:40:37 +0000 (10:40 +0200)
committerTomi Valkeinen <tomi.valkeinen@ti.com>
Fri, 2 Aug 2013 10:15:08 +0000 (13:15 +0300)
Add support for the Himax HX8369 controller as it is quite similar to the
hx8357.

Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
drivers/video/backlight/hx8357.c

index 47237fa73b0c381d29c0a997b06b4766e7351451..c7af8c45ab8a448678181f22c3074cbc7be0e89f 100644 (file)
 #define HX8357_SET_POWER_NORMAL                0xd2
 #define HX8357_SET_PANEL_RELATED       0xe9
 
+#define HX8369_SET_DISPLAY_BRIGHTNESS          0x51
+#define HX8369_WRITE_CABC_DISPLAY_VALUE                0x53
+#define HX8369_WRITE_CABC_BRIGHT_CTRL          0x55
+#define HX8369_WRITE_CABC_MIN_BRIGHTNESS       0x5e
+#define HX8369_SET_POWER                       0xb1
+#define HX8369_SET_DISPLAY_MODE                        0xb2
+#define HX8369_SET_DISPLAY_WAVEFORM_CYC                0xb4
+#define HX8369_SET_VCOM                                0xb6
+#define HX8369_SET_EXTENSION_COMMAND           0xb9
+#define HX8369_SET_GIP                         0xd5
+#define HX8369_SET_GAMMA_CURVE_RELATED         0xe0
+
 struct hx8357_data {
        unsigned                im_pins[HX8357_NUM_IM_PINS];
        unsigned                reset;
@@ -144,6 +156,61 @@ static u8 hx8357_seq_display_mode[] = {
        HX8357_SET_DISPLAY_MODE_RGB_INTERFACE,
 };
 
+static u8 hx8369_seq_write_CABC_min_brightness[] = {
+       HX8369_WRITE_CABC_MIN_BRIGHTNESS, 0x00,
+};
+
+static u8 hx8369_seq_write_CABC_control[] = {
+       HX8369_WRITE_CABC_DISPLAY_VALUE, 0x24,
+};
+
+static u8 hx8369_seq_set_display_brightness[] = {
+       HX8369_SET_DISPLAY_BRIGHTNESS, 0xFF,
+};
+
+static u8 hx8369_seq_write_CABC_control_setting[] = {
+       HX8369_WRITE_CABC_BRIGHT_CTRL, 0x02,
+};
+
+static u8 hx8369_seq_extension_command[] = {
+       HX8369_SET_EXTENSION_COMMAND, 0xff, 0x83, 0x69,
+};
+
+static u8 hx8369_seq_display_related[] = {
+       HX8369_SET_DISPLAY_MODE, 0x00, 0x2b, 0x03, 0x03, 0x70, 0x00,
+       0xff, 0x00, 0x00, 0x00, 0x00, 0x03, 0x03, 0x00, 0x01,
+};
+
+static u8 hx8369_seq_panel_waveform_cycle[] = {
+       HX8369_SET_DISPLAY_WAVEFORM_CYC, 0x0a, 0x1d, 0x80, 0x06, 0x02,
+};
+
+static u8 hx8369_seq_set_address_mode[] = {
+       HX8357_SET_ADDRESS_MODE, 0x00,
+};
+
+static u8 hx8369_seq_vcom[] = {
+       HX8369_SET_VCOM, 0x3e, 0x3e,
+};
+
+static u8 hx8369_seq_gip[] = {
+       HX8369_SET_GIP, 0x00, 0x01, 0x03, 0x25, 0x01, 0x02, 0x28, 0x70,
+       0x11, 0x13, 0x00, 0x00, 0x40, 0x26, 0x51, 0x37, 0x00, 0x00, 0x71,
+       0x35, 0x60, 0x24, 0x07, 0x0f, 0x04, 0x04,
+};
+
+static u8 hx8369_seq_power[] = {
+       HX8369_SET_POWER, 0x01, 0x00, 0x34, 0x03, 0x00, 0x11, 0x11, 0x32,
+       0x2f, 0x3f, 0x3f, 0x01, 0x3a, 0x01, 0xe6, 0xe6, 0xe6, 0xe6, 0xe6,
+};
+
+static u8 hx8369_seq_gamma_curve_related[] = {
+       HX8369_SET_GAMMA_CURVE_RELATED, 0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d,
+       0x2e, 0x4a, 0x08, 0x0e, 0x0f, 0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+       0x00, 0x0d, 0x19, 0x2f, 0x3b, 0x3d, 0x2e, 0x4a, 0x08, 0x0e, 0x0f,
+       0x14, 0x16, 0x14, 0x14, 0x14, 0x1e,
+};
+
 static int hx8357_spi_write_then_read(struct lcd_device *lcdev,
                                u8 *txbuf, u16 txlen,
                                u8 *rxbuf, u16 rxlen)
@@ -220,6 +287,10 @@ static int hx8357_enter_standby(struct lcd_device *lcdev)
        if (ret < 0)
                return ret;
 
+       /*
+        * The controller needs 120ms when entering in sleep mode before we can
+        * send the command to go off sleep mode
+        */
        msleep(120);
 
        return 0;
@@ -233,6 +304,10 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
        if (ret < 0)
                return ret;
 
+       /*
+        * The controller needs 120ms when exiting from sleep mode before we
+        * can send the command to enter in sleep mode
+        */
        msleep(120);
 
        ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
@@ -242,6 +317,21 @@ static int hx8357_exit_standby(struct lcd_device *lcdev)
        return 0;
 }
 
+static void hx8357_lcd_reset(struct lcd_device *lcdev)
+{
+       struct hx8357_data *lcd = lcd_get_data(lcdev);
+
+       /* Reset the screen */
+       gpio_set_value(lcd->reset, 1);
+       usleep_range(10000, 12000);
+       gpio_set_value(lcd->reset, 0);
+       usleep_range(10000, 12000);
+       gpio_set_value(lcd->reset, 1);
+
+       /* The controller needs 120ms to recover from reset */
+       msleep(120);
+}
+
 static int hx8357_lcd_init(struct lcd_device *lcdev)
 {
        struct hx8357_data *lcd = lcd_get_data(lcdev);
@@ -257,14 +347,6 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
                gpio_set_value_cansleep(lcd->im_pins[2], 1);
        }
 
-       /* Reset the screen */
-       gpio_set_value(lcd->reset, 1);
-       usleep_range(10000, 12000);
-       gpio_set_value(lcd->reset, 0);
-       usleep_range(10000, 12000);
-       gpio_set_value(lcd->reset, 1);
-       msleep(120);
-
        ret = hx8357_spi_write_array(lcdev, hx8357_seq_power,
                                ARRAY_SIZE(hx8357_seq_power));
        if (ret < 0)
@@ -344,6 +426,9 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
        if (ret < 0)
                return ret;
 
+       /*
+        * The controller needs 120ms to fully recover from exiting sleep mode
+        */
        msleep(120);
 
        ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
@@ -359,6 +444,96 @@ static int hx8357_lcd_init(struct lcd_device *lcdev)
        return 0;
 }
 
+static int hx8369_lcd_init(struct lcd_device *lcdev)
+{
+       int ret;
+
+       ret = hx8357_spi_write_array(lcdev, hx8369_seq_extension_command,
+                               ARRAY_SIZE(hx8369_seq_extension_command));
+       if (ret < 0)
+               return ret;
+       usleep_range(10000, 12000);
+
+       ret = hx8357_spi_write_array(lcdev, hx8369_seq_display_related,
+                               ARRAY_SIZE(hx8369_seq_display_related));
+       if (ret < 0)
+               return ret;
+
+       ret = hx8357_spi_write_array(lcdev, hx8369_seq_panel_waveform_cycle,
+                               ARRAY_SIZE(hx8369_seq_panel_waveform_cycle));
+       if (ret < 0)
+               return ret;
+
+       ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_address_mode,
+                               ARRAY_SIZE(hx8369_seq_set_address_mode));
+       if (ret < 0)
+               return ret;
+
+       ret = hx8357_spi_write_array(lcdev, hx8369_seq_vcom,
+                               ARRAY_SIZE(hx8369_seq_vcom));
+       if (ret < 0)
+               return ret;
+
+       ret = hx8357_spi_write_array(lcdev, hx8369_seq_gip,
+                               ARRAY_SIZE(hx8369_seq_gip));
+       if (ret < 0)
+               return ret;
+
+       ret = hx8357_spi_write_array(lcdev, hx8369_seq_power,
+                               ARRAY_SIZE(hx8369_seq_power));
+       if (ret < 0)
+               return ret;
+
+       ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+       if (ret < 0)
+               return ret;
+
+       /*
+        * The controller needs 120ms to fully recover from exiting sleep mode
+        */
+       msleep(120);
+
+       ret = hx8357_spi_write_array(lcdev, hx8369_seq_gamma_curve_related,
+                               ARRAY_SIZE(hx8369_seq_gamma_curve_related));
+       if (ret < 0)
+               return ret;
+
+       ret = hx8357_spi_write_byte(lcdev, HX8357_EXIT_SLEEP_MODE);
+       if (ret < 0)
+               return ret;
+       usleep_range(1000, 1200);
+
+       ret = hx8357_spi_write_array(lcdev, hx8369_seq_write_CABC_control,
+                               ARRAY_SIZE(hx8369_seq_write_CABC_control));
+       if (ret < 0)
+               return ret;
+       usleep_range(10000, 12000);
+
+       ret = hx8357_spi_write_array(lcdev,
+                       hx8369_seq_write_CABC_control_setting,
+                       ARRAY_SIZE(hx8369_seq_write_CABC_control_setting));
+       if (ret < 0)
+               return ret;
+
+       ret = hx8357_spi_write_array(lcdev,
+                       hx8369_seq_write_CABC_min_brightness,
+                       ARRAY_SIZE(hx8369_seq_write_CABC_min_brightness));
+       if (ret < 0)
+               return ret;
+       usleep_range(10000, 12000);
+
+       ret = hx8357_spi_write_array(lcdev, hx8369_seq_set_display_brightness,
+                               ARRAY_SIZE(hx8369_seq_set_display_brightness));
+       if (ret < 0)
+               return ret;
+
+       ret = hx8357_spi_write_byte(lcdev, HX8357_SET_DISPLAY_ON);
+       if (ret < 0)
+               return ret;
+
+       return 0;
+}
+
 #define POWER_IS_ON(pwr)       ((pwr) <= FB_BLANK_NORMAL)
 
 static int hx8357_set_power(struct lcd_device *lcdev, int power)
@@ -391,10 +566,24 @@ static struct lcd_ops hx8357_ops = {
        .get_power      = hx8357_get_power,
 };
 
+static const struct of_device_id hx8357_dt_ids[] = {
+       {
+               .compatible = "himax,hx8357",
+               .data = hx8357_lcd_init,
+       },
+       {
+               .compatible = "himax,hx8369",
+               .data = hx8369_lcd_init,
+       },
+       {},
+};
+MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
+
 static int hx8357_probe(struct spi_device *spi)
 {
        struct lcd_device *lcdev;
        struct hx8357_data *lcd;
+       const struct of_device_id *match;
        int i, ret;
 
        lcd = devm_kzalloc(&spi->dev, sizeof(*lcd), GFP_KERNEL);
@@ -411,6 +600,10 @@ static int hx8357_probe(struct spi_device *spi)
 
        lcd->spi = spi;
 
+       match = of_match_device(hx8357_dt_ids, &spi->dev);
+       if (!match || !match->data)
+               return -EINVAL;
+
        lcd->reset = of_get_named_gpio(spi->dev.of_node, "gpios-reset", 0);
        if (!gpio_is_valid(lcd->reset)) {
                dev_err(&spi->dev, "Missing dt property: gpios-reset\n");
@@ -462,7 +655,9 @@ static int hx8357_probe(struct spi_device *spi)
        }
        spi_set_drvdata(spi, lcdev);
 
-       ret = hx8357_lcd_init(lcdev);
+       hx8357_lcd_reset(lcdev);
+
+       ret = ((int (*)(struct lcd_device *))match->data)(lcdev);
        if (ret) {
                dev_err(&spi->dev, "Couldn't initialize panel\n");
                goto init_error;
@@ -485,12 +680,6 @@ static int hx8357_remove(struct spi_device *spi)
        return 0;
 }
 
-static const struct of_device_id hx8357_dt_ids[] = {
-       { .compatible = "himax,hx8357" },
-       {},
-};
-MODULE_DEVICE_TABLE(of, hx8357_dt_ids);
-
 static struct spi_driver hx8357_driver = {
        .probe  = hx8357_probe,
        .remove = hx8357_remove,