mac80211: refactor mesh peer rate handling

To avoid passing supp_rates and basic_rates around all the time, just
derive these when needed in mesh_matches_local() and mesh_peer_init().

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c
index 133c118526fb749b181ab874d257b85fb8514e07..598a96a3a051acc4231da2ab108ebddf71b9f271 100644 (file)
--- a/net/mac80211/mesh.c
+++ b/net/mac80211/mesh.c
@@ -64,18 +64,18 @@ static void ieee80211_mesh_housekeeping_timer(unsigned long data)
 /**
  * mesh_matches_local - check if the config of a mesh point matches ours
  *
- * @ie: information elements of a management frame from the mesh peer
  * @sdata: local mesh subif
- * @basic_rates: BSSBasicRateSet of the peer candidate
+ * @ie: information elements of a management frame from the mesh peer
  *
  * This function checks if the mesh configuration of a mesh point matches the
  * local mesh configuration, i.e. if both nodes belong to the same mesh network.
  */
-bool mesh_matches_local(struct ieee802_11_elems *ie,
-                       struct ieee80211_sub_if_data *sdata, u32 basic_rates)
+bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
+                       struct ieee802_11_elems *ie)
 {
        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
        struct ieee80211_local *local = sdata->local;
+       u32 basic_rates = 0;
 
        /*
         * As support for each feature is added, check for matching
@@ -96,6 +96,9 @@ bool mesh_matches_local(struct ieee802_11_elems *ie,
             (ifmsh->mesh_auth_id == ie->mesh_config->meshconf_auth)))
                goto mismatch;
 
+       ieee80211_sta_get_rates(local, ie, local->oper_channel->band,
+                               &basic_rates);
+
        if (sdata->vif.bss_conf.basic_rates != basic_rates)
                goto mismatch;
 
@@ -630,7 +633,6 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
        struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh;
        struct ieee802_11_elems elems;
        struct ieee80211_channel *channel;
-       u32 supp_rates = 0, basic_rates = 0;
        size_t baselen;
        int freq;
        enum ieee80211_band band = rx_status->band;
@@ -661,12 +663,9 @@ static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata,
        if (!channel || channel->flags & IEEE80211_CHAN_DISABLED)
                return;
 
-       supp_rates = ieee80211_sta_get_rates(local, &elems,
-                                            band, &basic_rates);
-
        if (elems.mesh_id && elems.mesh_config &&
-           mesh_matches_local(&elems, sdata, basic_rates))
-               mesh_neighbour_update(mgmt->sa, supp_rates, sdata, &elems);
+           mesh_matches_local(sdata, &elems))
+               mesh_neighbour_update(sdata, mgmt->sa, &elems);
 
        if (ifmsh->sync_ops)
                ifmsh->sync_ops->rx_bcn_presp(sdata,

diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h
index 4ad738988801da72260c2074dc6d4c27bbe7c434..345f0e7d518e6de17d69c64553eb44e8e96ecf0f 100644 (file)
--- a/net/mac80211/mesh.h
+++ b/net/mac80211/mesh.h
@@ -222,8 +222,8 @@ int ieee80211_new_mesh_header(struct ieee80211s_hdr *meshhdr,
                char *addr6);
 int mesh_rmc_check(u8 *addr, struct ieee80211s_hdr *mesh_hdr,
                struct ieee80211_sub_if_data *sdata);
-bool mesh_matches_local(struct ieee802_11_elems *ie,
-                       struct ieee80211_sub_if_data *sdata, u32 basic_rates);
+bool mesh_matches_local(struct ieee80211_sub_if_data *sdata,
+                       struct ieee802_11_elems *ie);
 void mesh_ids_set_default(struct ieee80211_if_mesh *mesh);
 void mesh_mgmt_ies_add(struct sk_buff *skb,
                struct ieee80211_sub_if_data *sdata);
@@ -276,9 +276,9 @@ int mesh_path_add_gate(struct mesh_path *mpath);
 int mesh_path_send_to_gates(struct mesh_path *mpath);
 int mesh_gate_num(struct ieee80211_sub_if_data *sdata);
 /* Mesh plinks */
-void mesh_neighbour_update(u8 *hw_addr, u32 rates,
-               struct ieee80211_sub_if_data *sdata,
-               struct ieee802_11_elems *ie);
+void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata,
+                          u8 *hw_addr,
+                          struct ieee802_11_elems *ie);
 bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie);
 void mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata);
 void mesh_plink_broken(struct sta_info *sta);

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index c3a0b0a4f97ff4631a4a8be5f5873eb55fafa4eb..c2af7b3d03cd2cfe8581bcdf35dfef85e8f0589f 100644 (file)
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -268,20 +268,22 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
  *
  * @sdata: local meshif
  * @addr: peer's address
- * @rates: station's supported rates
  * @elems: IEs from beacon or mesh peering frame
  *
  * call under RCU
  */
 static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata,
-                                      u8 *addr, u32 rates,
+                                      u8 *addr,
                                       struct ieee802_11_elems *elems)
 {
        struct ieee80211_local *local = sdata->local;
+       enum ieee80211_band band = local->oper_channel->band;
        struct ieee80211_supported_band *sband;
+       u32 rates, basic_rates = 0;
        struct sta_info *sta;
 
-       sband = local->hw.wiphy->bands[local->oper_channel->band];
+       sband = local->hw.wiphy->bands[band];
+       rates = ieee80211_sta_get_rates(local, elems, band, &basic_rates);
 
        sta = sta_info_get(sdata, addr);
        if (!sta) {
@@ -292,7 +294,7 @@ static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata,
 
        spin_lock_bh(&sta->lock);
        sta->last_rx = jiffies;
-       sta->sta.supp_rates[local->hw.conf.channel->band] = rates;
+       sta->sta.supp_rates[band] = rates;
        if (elems->ht_cap_elem)
                ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband,
                                                  elems->ht_cap_elem,
@@ -306,8 +308,8 @@ static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata,
        return sta;
 }
 
-void mesh_neighbour_update(u8 *hw_addr, u32 rates,
-                          struct ieee80211_sub_if_data *sdata,
+void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata,
+                          u8 *hw_addr,
                           struct ieee802_11_elems *elems)
 {
        struct sta_info *sta;
@@ -322,7 +324,7 @@ void mesh_neighbour_update(u8 *hw_addr, u32 rates,
        }
 
        rcu_read_lock();
-       sta = mesh_peer_init(sdata, hw_addr, rates, elems);
+       sta = mesh_peer_init(sdata, hw_addr, elems);
        if (!sta)
                goto out;
 
@@ -479,7 +481,6 @@ void mesh_plink_block(struct sta_info *sta)
 void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt,
                         size_t len, struct ieee80211_rx_status *rx_status)
 {
-       struct ieee80211_local *local = sdata->local;
        struct ieee802_11_elems elems;
        struct sta_info *sta;
        enum plink_event event;
@@ -488,7 +489,6 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
        bool deactivated, matches_local = true;
        u8 ie_len;
        u8 *baseaddr;
-       u32 rates, basic_rates = 0;
        __le16 plid, llid, reason;
 #ifdef CONFIG_MAC80211_VERBOSE_MPL_DEBUG
        static const char *mplstates[] = {
@@ -583,11 +583,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
        /* Now we will figure out the appropriate event... */
        event = PLINK_UNDEFINED;
-       rates = ieee80211_sta_get_rates(local, &elems,
-                                       rx_status->band, &basic_rates);
-
        if (ftype != WLAN_SP_MESH_PEERING_CLOSE &&
-           (!mesh_matches_local(&elems, sdata, basic_rates))) {
+           !mesh_matches_local(sdata, &elems)) {
                matches_local = false;
                switch (ftype) {
                case WLAN_SP_MESH_PEERING_OPEN:
@@ -660,7 +657,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m
 
        if (event == OPN_ACPT) {
                /* allocate sta entry if necessary and update info */
-               sta = mesh_peer_init(sdata, mgmt->sa, rates, &elems);
+               sta = mesh_peer_init(sdata, mgmt->sa, &elems);
                if (!sta) {
                        mpl_dbg("Mesh plink: failed to init peer!\n");
                        rcu_read_unlock();