obj-$(CONFIG_X86_SMP) += smp_32.o smpboot_32.o tsc_sync.o
obj-$(CONFIG_SMP) += smpcommon_32.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
-obj-$(CONFIG_X86_MPPARSE) += mpparse.o
+obj-$(CONFIG_X86_MPPARSE) += mpparse_32.o
obj-$(CONFIG_X86_LOCAL_APIC) += apic_32.o nmi_32.o
obj-$(CONFIG_X86_IO_APIC) += io_apic_32.o
obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o
+++ /dev/null
-/*
- * Intel Multiprocessor Specification 1.1 and 1.4
- * compliant MP-table parsing routines.
- *
- * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
- * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
- *
- * Fixes
- * Erich Boleyn : MP v1.4 and additional changes.
- * Alan Cox : Added EBDA scanning
- * Ingo Molnar : various cleanups and rewrites
- * Maciej W. Rozycki: Bits for default MP configurations
- * Paul Diefenbaugh: Added full ACPI support
- */
-
-#include <linux/mm.h>
-#include <linux/init.h>
-#include <linux/acpi.h>
-#include <linux/delay.h>
-#include <linux/bootmem.h>
-#include <linux/kernel_stat.h>
-#include <linux/mc146818rtc.h>
-#include <linux/bitops.h>
-
-#include <asm/smp.h>
-#include <asm/acpi.h>
-#include <asm/mtrr.h>
-#include <asm/mpspec.h>
-#include <asm/io_apic.h>
-
-#include <mach_apic.h>
-#include <mach_apicdef.h>
-#include <mach_mpparse.h>
-#include <bios_ebda.h>
-
-/* Have we found an MP table */
-int smp_found_config;
-unsigned int __cpuinitdata maxcpus = NR_CPUS;
-
-/*
- * Various Linux-internal data structures created from the
- * MP-table.
- */
-int apic_version [MAX_APICS];
-int mp_bus_id_to_type [MAX_MP_BUSSES];
-int mp_bus_id_to_node [MAX_MP_BUSSES];
-int mp_bus_id_to_local [MAX_MP_BUSSES];
-int quad_local_to_mp_bus_id [NR_CPUS/4][4];
-int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
-static int mp_current_pci_id;
-
-/* I/O APIC entries */
-struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
-
-/* # of MP IRQ source entries */
-struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
-
-/* MP IRQ source entries */
-int mp_irq_entries;
-
-int nr_ioapics;
-
-int pic_mode;
-unsigned long mp_lapic_addr;
-
-unsigned int def_to_bigsmp = 0;
-
-/* Processor that is doing the boot up */
-unsigned int boot_cpu_physical_apicid = -1U;
-/* Internal processor count */
-unsigned int __cpuinitdata num_processors;
-
-/* Bitmask of physically existing CPUs */
-physid_mask_t phys_cpu_present_map;
-
-u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
-
-/*
- * Intel MP BIOS table parsing routines:
- */
-
-
-/*
- * Checksum an MP configuration block.
- */
-
-static int __init mpf_checksum(unsigned char *mp, int len)
-{
- int sum = 0;
-
- while (len--)
- sum += *mp++;
-
- return sum & 0xFF;
-}
-
-/*
- * Have to match translation table entries to main table entries by counter
- * hence the mpc_record variable .... can't see a less disgusting way of
- * doing this ....
- */
-
-static int mpc_record;
-static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata;
-
-static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
-{
- int ver, apicid;
- physid_mask_t phys_cpu;
-
- if (!(m->mpc_cpuflag & CPU_ENABLED))
- return;
-
- apicid = mpc_apic_id(m, translation_table[mpc_record]);
-
- if (m->mpc_featureflag&(1<<0))
- Dprintk(" Floating point unit present.\n");
- if (m->mpc_featureflag&(1<<7))
- Dprintk(" Machine Exception supported.\n");
- if (m->mpc_featureflag&(1<<8))
- Dprintk(" 64 bit compare & exchange supported.\n");
- if (m->mpc_featureflag&(1<<9))
- Dprintk(" Internal APIC present.\n");
- if (m->mpc_featureflag&(1<<11))
- Dprintk(" SEP present.\n");
- if (m->mpc_featureflag&(1<<12))
- Dprintk(" MTRR present.\n");
- if (m->mpc_featureflag&(1<<13))
- Dprintk(" PGE present.\n");
- if (m->mpc_featureflag&(1<<14))
- Dprintk(" MCA present.\n");
- if (m->mpc_featureflag&(1<<15))
- Dprintk(" CMOV present.\n");
- if (m->mpc_featureflag&(1<<16))
- Dprintk(" PAT present.\n");
- if (m->mpc_featureflag&(1<<17))
- Dprintk(" PSE present.\n");
- if (m->mpc_featureflag&(1<<18))
- Dprintk(" PSN present.\n");
- if (m->mpc_featureflag&(1<<19))
- Dprintk(" Cache Line Flush Instruction present.\n");
- /* 20 Reserved */
- if (m->mpc_featureflag&(1<<21))
- Dprintk(" Debug Trace and EMON Store present.\n");
- if (m->mpc_featureflag&(1<<22))
- Dprintk(" ACPI Thermal Throttle Registers present.\n");
- if (m->mpc_featureflag&(1<<23))
- Dprintk(" MMX present.\n");
- if (m->mpc_featureflag&(1<<24))
- Dprintk(" FXSR present.\n");
- if (m->mpc_featureflag&(1<<25))
- Dprintk(" XMM present.\n");
- if (m->mpc_featureflag&(1<<26))
- Dprintk(" Willamette New Instructions present.\n");
- if (m->mpc_featureflag&(1<<27))
- Dprintk(" Self Snoop present.\n");
- if (m->mpc_featureflag&(1<<28))
- Dprintk(" HT present.\n");
- if (m->mpc_featureflag&(1<<29))
- Dprintk(" Thermal Monitor present.\n");
- /* 30, 31 Reserved */
-
-
- if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
- Dprintk(" Bootup CPU\n");
- boot_cpu_physical_apicid = m->mpc_apicid;
- }
-
- ver = m->mpc_apicver;
-
- /*
- * Validate version
- */
- if (ver == 0x0) {
- printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
- "fixing up to 0x10. (tell your hw vendor)\n",
- m->mpc_apicid);
- ver = 0x10;
- }
- apic_version[m->mpc_apicid] = ver;
-
- phys_cpu = apicid_to_cpu_present(apicid);
- physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
-
- if (num_processors >= NR_CPUS) {
- printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
- " Processor ignored.\n", NR_CPUS);
- return;
- }
-
- if (num_processors >= maxcpus) {
- printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
- " Processor ignored.\n", maxcpus);
- return;
- }
-
- cpu_set(num_processors, cpu_possible_map);
- num_processors++;
-
- /*
- * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
- * but we need to work other dependencies like SMP_SUSPEND etc
- * before this can be done without some confusion.
- * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
- * - Ashok Raj <ashok.raj@intel.com>
- */
- if (num_processors > 8) {
- switch (boot_cpu_data.x86_vendor) {
- case X86_VENDOR_INTEL:
- if (!APIC_XAPIC(ver)) {
- def_to_bigsmp = 0;
- break;
- }
- /* If P4 and above fall through */
- case X86_VENDOR_AMD:
- def_to_bigsmp = 1;
- }
- }
- bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
-}
-
-static void __init MP_bus_info (struct mpc_config_bus *m)
-{
- char str[7];
-
- memcpy(str, m->mpc_bustype, 6);
- str[6] = 0;
-
- mpc_oem_bus_info(m, str, translation_table[mpc_record]);
-
-#if MAX_MP_BUSSES < 256
- if (m->mpc_busid >= MAX_MP_BUSSES) {
- printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
- " is too large, max. supported is %d\n",
- m->mpc_busid, str, MAX_MP_BUSSES - 1);
- return;
- }
-#endif
-
- if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
- } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
- } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI)-1) == 0) {
- mpc_oem_pci_bus(m, translation_table[mpc_record]);
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
- mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
- mp_current_pci_id++;
- } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) {
- mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
- } else {
- printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
- }
-}
-
-static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
-{
- if (!(m->mpc_flags & MPC_APIC_USABLE))
- return;
-
- printk(KERN_INFO "I/O APIC #%d Version %d at 0x%lX.\n",
- m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
- if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_CRIT "Max # of I/O APICs (%d) exceeded (found %d).\n",
- MAX_IO_APICS, nr_ioapics);
- panic("Recompile kernel with bigger MAX_IO_APICS!.\n");
- }
- if (!m->mpc_apicaddr) {
- printk(KERN_ERR "WARNING: bogus zero I/O APIC address"
- " found in MP table, skipping!\n");
- return;
- }
- mp_ioapics[nr_ioapics] = *m;
- nr_ioapics++;
-}
-
-static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
-{
- mp_irqs [mp_irq_entries] = *m;
- Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
- " IRQ %02x, APIC ID %x, APIC INT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
- m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!!\n");
-}
-
-static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
-{
- Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
- " IRQ %02x, APIC ID %x, APIC LINT %02x\n",
- m->mpc_irqtype, m->mpc_irqflag & 3,
- (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
- m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
-}
-
-#ifdef CONFIG_X86_NUMAQ
-static void __init MP_translation_info (struct mpc_config_translation *m)
-{
- printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local);
-
- if (mpc_record >= MAX_MPC_ENTRY)
- printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
- else
- translation_table[mpc_record] = m; /* stash this for later */
- if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
- node_set_online(m->trans_quad);
-}
-
-/*
- * Read/parse the MPC oem tables
- */
-
-static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, \
- unsigned short oemsize)
-{
- int count = sizeof (*oemtable); /* the header size */
- unsigned char *oemptr = ((unsigned char *)oemtable)+count;
-
- mpc_record = 0;
- printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
- if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4))
- {
- printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
- oemtable->oem_signature[0],
- oemtable->oem_signature[1],
- oemtable->oem_signature[2],
- oemtable->oem_signature[3]);
- return;
- }
- if (mpf_checksum((unsigned char *)oemtable,oemtable->oem_length))
- {
- printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
- return;
- }
- while (count < oemtable->oem_length) {
- switch (*oemptr) {
- case MP_TRANSLATION:
- {
- struct mpc_config_translation *m=
- (struct mpc_config_translation *)oemptr;
- MP_translation_info(m);
- oemptr += sizeof(*m);
- count += sizeof(*m);
- ++mpc_record;
- break;
- }
- default:
- {
- printk(KERN_WARNING "Unrecognised OEM table entry type! - %d\n", (int) *oemptr);
- return;
- }
- }
- }
-}
-
-static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
- char *productid)
-{
- if (strncmp(oem, "IBM NUMA", 8))
- printk("Warning! May not be a NUMA-Q system!\n");
- if (mpc->mpc_oemptr)
- smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr,
- mpc->mpc_oemsize);
-}
-#endif /* CONFIG_X86_NUMAQ */
-
-/*
- * Read/parse the MPC
- */
-
-static int __init smp_read_mpc(struct mp_config_table *mpc)
-{
- char str[16];
- char oem[10];
- int count=sizeof(*mpc);
- unsigned char *mpt=((unsigned char *)mpc)+count;
-
- if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
- printk(KERN_ERR "SMP mptable: bad signature [0x%x]!\n",
- *(u32 *)mpc->mpc_signature);
- return 0;
- }
- if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
- printk(KERN_ERR "SMP mptable: checksum error!\n");
- return 0;
- }
- if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
- printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n",
- mpc->mpc_spec);
- return 0;
- }
- if (!mpc->mpc_lapic) {
- printk(KERN_ERR "SMP mptable: null local APIC address!\n");
- return 0;
- }
- memcpy(oem,mpc->mpc_oem,8);
- oem[8]=0;
- printk(KERN_INFO "OEM ID: %s ",oem);
-
- memcpy(str,mpc->mpc_productid,12);
- str[12]=0;
- printk("Product ID: %s ",str);
-
- mps_oem_check(mpc, oem, str);
-
- printk("APIC at: 0x%lX\n",mpc->mpc_lapic);
-
- /*
- * Save the local APIC address (it might be non-default) -- but only
- * if we're not using ACPI.
- */
- if (!acpi_lapic)
- mp_lapic_addr = mpc->mpc_lapic;
-
- /*
- * Now process the configuration blocks.
- */
- mpc_record = 0;
- while (count < mpc->mpc_length) {
- switch(*mpt) {
- case MP_PROCESSOR:
- {
- struct mpc_config_processor *m=
- (struct mpc_config_processor *)mpt;
- /* ACPI may have already provided this data */
- if (!acpi_lapic)
- MP_processor_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_BUS:
- {
- struct mpc_config_bus *m=
- (struct mpc_config_bus *)mpt;
- MP_bus_info(m);
- mpt += sizeof(*m);
- count += sizeof(*m);
- break;
- }
- case MP_IOAPIC:
- {
- struct mpc_config_ioapic *m=
- (struct mpc_config_ioapic *)mpt;
- MP_ioapic_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
- break;
- }
- case MP_INTSRC:
- {
- struct mpc_config_intsrc *m=
- (struct mpc_config_intsrc *)mpt;
-
- MP_intsrc_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
- break;
- }
- case MP_LINTSRC:
- {
- struct mpc_config_lintsrc *m=
- (struct mpc_config_lintsrc *)mpt;
- MP_lintsrc_info(m);
- mpt+=sizeof(*m);
- count+=sizeof(*m);
- break;
- }
- default:
- {
- count = mpc->mpc_length;
- break;
- }
- }
- ++mpc_record;
- }
- setup_apic_routing();
- if (!num_processors)
- printk(KERN_ERR "SMP mptable: no processors registered!\n");
- return num_processors;
-}
-
-static int __init ELCR_trigger(unsigned int irq)
-{
- unsigned int port;
-
- port = 0x4d0 + (irq >> 3);
- return (inb(port) >> (irq & 7)) & 1;
-}
-
-static void __init construct_default_ioirq_mptable(int mpc_default_type)
-{
- struct mpc_config_intsrc intsrc;
- int i;
- int ELCR_fallback = 0;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* conforming */
- intsrc.mpc_srcbus = 0;
- intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
-
- intsrc.mpc_irqtype = mp_INT;
-
- /*
- * If true, we have an ISA/PCI system with no IRQ entries
- * in the MP table. To prevent the PCI interrupts from being set up
- * incorrectly, we try to use the ELCR. The sanity check to see if
- * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
- * never be level sensitive, so we simply see if the ELCR agrees.
- * If it does, we assume it's valid.
- */
- if (mpc_default_type == 5) {
- printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
-
- if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
- printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n");
- else {
- printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
- ELCR_fallback = 1;
- }
- }
-
- for (i = 0; i < 16; i++) {
- switch (mpc_default_type) {
- case 2:
- if (i == 0 || i == 13)
- continue; /* IRQ0 & IRQ13 not connected */
- /* fall through */
- default:
- if (i == 2)
- continue; /* IRQ2 is never connected */
- }
-
- if (ELCR_fallback) {
- /*
- * If the ELCR indicates a level-sensitive interrupt, we
- * copy that information over to the MP table in the
- * irqflag field (level sensitive, active high polarity).
- */
- if (ELCR_trigger(i))
- intsrc.mpc_irqflag = 13;
- else
- intsrc.mpc_irqflag = 0;
- }
-
- intsrc.mpc_srcbusirq = i;
- intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
- MP_intsrc_info(&intsrc);
- }
-
- intsrc.mpc_irqtype = mp_ExtINT;
- intsrc.mpc_srcbusirq = 0;
- intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
- MP_intsrc_info(&intsrc);
-}
-
-static inline void __init construct_default_ISA_mptable(int mpc_default_type)
-{
- struct mpc_config_processor processor;
- struct mpc_config_bus bus;
- struct mpc_config_ioapic ioapic;
- struct mpc_config_lintsrc lintsrc;
- int linttypes[2] = { mp_ExtINT, mp_NMI };
- int i;
-
- /*
- * local APIC has default address
- */
- mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
-
- /*
- * 2 CPUs, numbered 0 & 1.
- */
- processor.mpc_type = MP_PROCESSOR;
- /* Either an integrated APIC or a discrete 82489DX. */
- processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
- processor.mpc_cpuflag = CPU_ENABLED;
- processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) |
- boot_cpu_data.x86_mask;
- processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
- processor.mpc_reserved[0] = 0;
- processor.mpc_reserved[1] = 0;
- for (i = 0; i < 2; i++) {
- processor.mpc_apicid = i;
- MP_processor_info(&processor);
- }
-
- bus.mpc_type = MP_BUS;
- bus.mpc_busid = 0;
- switch (mpc_default_type) {
- default:
- printk("???\n");
- printk(KERN_ERR "Unknown standard configuration %d\n",
- mpc_default_type);
- /* fall through */
- case 1:
- case 5:
- memcpy(bus.mpc_bustype, "ISA ", 6);
- break;
- case 2:
- case 6:
- case 3:
- memcpy(bus.mpc_bustype, "EISA ", 6);
- break;
- case 4:
- case 7:
- memcpy(bus.mpc_bustype, "MCA ", 6);
- }
- MP_bus_info(&bus);
- if (mpc_default_type > 4) {
- bus.mpc_busid = 1;
- memcpy(bus.mpc_bustype, "PCI ", 6);
- MP_bus_info(&bus);
- }
-
- ioapic.mpc_type = MP_IOAPIC;
- ioapic.mpc_apicid = 2;
- ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
- ioapic.mpc_flags = MPC_APIC_USABLE;
- ioapic.mpc_apicaddr = 0xFEC00000;
- MP_ioapic_info(&ioapic);
-
- /*
- * We set up most of the low 16 IO-APIC pins according to MPS rules.
- */
- construct_default_ioirq_mptable(mpc_default_type);
-
- lintsrc.mpc_type = MP_LINTSRC;
- lintsrc.mpc_irqflag = 0; /* conforming */
- lintsrc.mpc_srcbusid = 0;
- lintsrc.mpc_srcbusirq = 0;
- lintsrc.mpc_destapic = MP_APIC_ALL;
- for (i = 0; i < 2; i++) {
- lintsrc.mpc_irqtype = linttypes[i];
- lintsrc.mpc_destapiclint = i;
- MP_lintsrc_info(&lintsrc);
- }
-}
-
-static struct intel_mp_floating *mpf_found;
-
-/*
- * Scan the memory blocks for an SMP configuration block.
- */
-void __init get_smp_config (void)
-{
- struct intel_mp_floating *mpf = mpf_found;
-
- /*
- * ACPI supports both logical (e.g. Hyper-Threading) and physical
- * processors, where MPS only supports physical.
- */
- if (acpi_lapic && acpi_ioapic) {
- printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
- return;
- }
- else if (acpi_lapic)
- printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
-
- printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
- if (mpf->mpf_feature2 & (1<<7)) {
- printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
- pic_mode = 1;
- } else {
- printk(KERN_INFO " Virtual Wire compatibility mode.\n");
- pic_mode = 0;
- }
-
- /*
- * Now see if we need to read further.
- */
- if (mpf->mpf_feature1 != 0) {
-
- printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
- construct_default_ISA_mptable(mpf->mpf_feature1);
-
- } else if (mpf->mpf_physptr) {
-
- /*
- * Read the physical hardware table. Anything here will
- * override the defaults.
- */
- if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
- smp_found_config = 0;
- printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
- printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
- return;
- }
- /*
- * If there are no explicit MP IRQ entries, then we are
- * broken. We set up most of the low 16 IO-APIC pins to
- * ISA defaults and hope it will work.
- */
- if (!mp_irq_entries) {
- struct mpc_config_bus bus;
-
- printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
-
- bus.mpc_type = MP_BUS;
- bus.mpc_busid = 0;
- memcpy(bus.mpc_bustype, "ISA ", 6);
- MP_bus_info(&bus);
-
- construct_default_ioirq_mptable(0);
- }
-
- } else
- BUG();
-
- printk(KERN_INFO "Processors: %d\n", num_processors);
- /*
- * Only use the first configuration found.
- */
-}
-
-static int __init smp_scan_config (unsigned long base, unsigned long length)
-{
- unsigned long *bp = phys_to_virt(base);
- struct intel_mp_floating *mpf;
-
- Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
- if (sizeof(*mpf) != 16)
- printk("Error: MPF size\n");
-
- while (length > 0) {
- mpf = (struct intel_mp_floating *)bp;
- if ((*bp == SMP_MAGIC_IDENT) &&
- (mpf->mpf_length == 1) &&
- !mpf_checksum((unsigned char *)bp, 16) &&
- ((mpf->mpf_specification == 1)
- || (mpf->mpf_specification == 4)) ) {
-
- smp_found_config = 1;
- printk(KERN_INFO "found SMP MP-table at %08lx\n",
- virt_to_phys(mpf));
- reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE);
- if (mpf->mpf_physptr) {
- /*
- * We cannot access to MPC table to compute
- * table size yet, as only few megabytes from
- * the bottom is mapped now.
- * PC-9800's MPC table places on the very last
- * of physical memory; so that simply reserving
- * PAGE_SIZE from mpg->mpf_physptr yields BUG()
- * in reserve_bootmem.
- */
- unsigned long size = PAGE_SIZE;
- unsigned long end = max_low_pfn * PAGE_SIZE;
- if (mpf->mpf_physptr + size > end)
- size = end - mpf->mpf_physptr;
- reserve_bootmem(mpf->mpf_physptr, size);
- }
-
- mpf_found = mpf;
- return 1;
- }
- bp += 4;
- length -= 16;
- }
- return 0;
-}
-
-void __init find_smp_config (void)
-{
- unsigned int address;
-
- /*
- * FIXME: Linux assumes you have 640K of base ram..
- * this continues the error...
- *
- * 1) Scan the bottom 1K for a signature
- * 2) Scan the top 1K of base RAM
- * 3) Scan the 64K of bios
- */
- if (smp_scan_config(0x0,0x400) ||
- smp_scan_config(639*0x400,0x400) ||
- smp_scan_config(0xF0000,0x10000))
- return;
- /*
- * If it is an SMP machine we should know now, unless the
- * configuration is in an EISA/MCA bus machine with an
- * extended bios data area.
- *
- * there is a real-mode segmented pointer pointing to the
- * 4K EBDA area at 0x40E, calculate and scan it here.
- *
- * NOTE! There are Linux loaders that will corrupt the EBDA
- * area, and as such this kind of SMP config may be less
- * trustworthy, simply because the SMP table may have been
- * stomped on during early boot. These loaders are buggy and
- * should be fixed.
- *
- * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
- */
-
- address = get_bios_ebda();
- if (address)
- smp_scan_config(address, 0x400);
-}
-
-int es7000_plat;
-
-/* --------------------------------------------------------------------------
- ACPI-based MP Configuration
- -------------------------------------------------------------------------- */
-
-#ifdef CONFIG_ACPI
-
-void __init mp_register_lapic_address(u64 address)
-{
- mp_lapic_addr = (unsigned long) address;
-
- set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
-
- if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
-
- Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
-}
-
-void __cpuinit mp_register_lapic (u8 id, u8 enabled)
-{
- struct mpc_config_processor processor;
- int boot_cpu = 0;
-
- if (MAX_APICS - id <= 0) {
- printk(KERN_WARNING "Processor #%d invalid (max %d)\n",
- id, MAX_APICS);
- return;
- }
-
- if (id == boot_cpu_physical_apicid)
- boot_cpu = 1;
-
- processor.mpc_type = MP_PROCESSOR;
- processor.mpc_apicid = id;
- processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR));
- processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
- processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
- processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
- (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
- processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
- processor.mpc_reserved[0] = 0;
- processor.mpc_reserved[1] = 0;
-
- MP_processor_info(&processor);
-}
-
-#ifdef CONFIG_X86_IO_APIC
-
-#define MP_ISA_BUS 0
-#define MP_MAX_IOAPIC_PIN 127
-
-static struct mp_ioapic_routing {
- int apic_id;
- int gsi_base;
- int gsi_end;
- u32 pin_programmed[4];
-} mp_ioapic_routing[MAX_IO_APICS];
-
-static int mp_find_ioapic (int gsi)
-{
- int i = 0;
-
- /* Find the IOAPIC that manages this GSI. */
- for (i = 0; i < nr_ioapics; i++) {
- if ((gsi >= mp_ioapic_routing[i].gsi_base)
- && (gsi <= mp_ioapic_routing[i].gsi_end))
- return i;
- }
-
- printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
-
- return -1;
-}
-
-void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
-{
- int idx = 0;
- int tmpid;
-
- if (nr_ioapics >= MAX_IO_APICS) {
- printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
- "(found %d)\n", MAX_IO_APICS, nr_ioapics);
- panic("Recompile kernel with bigger MAX_IO_APICS!\n");
- }
- if (!address) {
- printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
- " found in MADT table, skipping!\n");
- return;
- }
-
- idx = nr_ioapics++;
-
- mp_ioapics[idx].mpc_type = MP_IOAPIC;
- mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
- mp_ioapics[idx].mpc_apicaddr = address;
-
- set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
- && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
- tmpid = io_apic_get_unique_id(idx, id);
- else
- tmpid = id;
- if (tmpid == -1) {
- nr_ioapics--;
- return;
- }
- mp_ioapics[idx].mpc_apicid = tmpid;
- mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
-
- /*
- * Build basic GSI lookup table to facilitate gsi->io_apic lookups
- * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
- */
- mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
- mp_ioapic_routing[idx].gsi_base = gsi_base;
- mp_ioapic_routing[idx].gsi_end = gsi_base +
- io_apic_get_redir_entries(idx);
-
- printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
- "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
- mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
- mp_ioapic_routing[idx].gsi_base,
- mp_ioapic_routing[idx].gsi_end);
-}
-
-void __init
-mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
-{
- struct mpc_config_intsrc intsrc;
- int ioapic = -1;
- int pin = -1;
-
- /*
- * Convert 'gsi' to 'ioapic.pin'.
- */
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0)
- return;
- pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
-
- /*
- * TBD: This check is for faulty timer entries, where the override
- * erroneously sets the trigger to level, resulting in a HUGE
- * increase of timer interrupts!
- */
- if ((bus_irq == 0) && (trigger == 3))
- trigger = 1;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_irqflag = (trigger << 2) | polarity;
- intsrc.mpc_srcbus = MP_ISA_BUS;
- intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
- intsrc.mpc_dstirq = pin; /* INTIN# */
-
- Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
- intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
- intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
-
- mp_irqs[mp_irq_entries] = intsrc;
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!\n");
-}
-
-void __init mp_config_acpi_legacy_irqs (void)
-{
- struct mpc_config_intsrc intsrc;
- int i = 0;
- int ioapic = -1;
-
- /*
- * Fabricate the legacy ISA bus (bus #31).
- */
- mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
- Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
-
- /*
- * Older generations of ES7000 have no legacy identity mappings
- */
- if (es7000_plat == 1)
- return;
-
- /*
- * Locate the IOAPIC that manages the ISA IRQs (0-15).
- */
- ioapic = mp_find_ioapic(0);
- if (ioapic < 0)
- return;
-
- intsrc.mpc_type = MP_INTSRC;
- intsrc.mpc_irqflag = 0; /* Conforming */
- intsrc.mpc_srcbus = MP_ISA_BUS;
- intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
-
- /*
- * Use the default configuration for the IRQs 0-15. Unless
- * overriden by (MADT) interrupt source override entries.
- */
- for (i = 0; i < 16; i++) {
- int idx;
-
- for (idx = 0; idx < mp_irq_entries; idx++) {
- struct mpc_config_intsrc *irq = mp_irqs + idx;
-
- /* Do we already have a mapping for this ISA IRQ? */
- if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
- break;
-
- /* Do we already have a mapping for this IOAPIC pin */
- if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
- (irq->mpc_dstirq == i))
- break;
- }
-
- if (idx != mp_irq_entries) {
- printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
- continue; /* IRQ already used */
- }
-
- intsrc.mpc_irqtype = mp_INT;
- intsrc.mpc_srcbusirq = i; /* Identity mapped */
- intsrc.mpc_dstirq = i;
-
- Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
- "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
- (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
- intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
- intsrc.mpc_dstirq);
-
- mp_irqs[mp_irq_entries] = intsrc;
- if (++mp_irq_entries == MAX_IRQ_SOURCES)
- panic("Max # of irq sources exceeded!\n");
- }
-}
-
-#define MAX_GSI_NUM 4096
-
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
-{
- int ioapic = -1;
- int ioapic_pin = 0;
- int idx, bit = 0;
- static int pci_irq = 16;
- /*
- * Mapping between Global System Interrups, which
- * represent all possible interrupts, and IRQs
- * assigned to actual devices.
- */
- static int gsi_to_irq[MAX_GSI_NUM];
-
- /* Don't set up the ACPI SCI because it's already set up */
- if (acpi_gbl_FADT.sci_interrupt == gsi)
- return gsi;
-
- ioapic = mp_find_ioapic(gsi);
- if (ioapic < 0) {
- printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
- return gsi;
- }
-
- ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
-
- if (ioapic_renumber_irq)
- gsi = ioapic_renumber_irq(ioapic, gsi);
-
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
- bit = ioapic_pin % 32;
- idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
- if (idx > 3) {
- printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
- ioapic_pin);
- return gsi;
- }
- if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
- Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
- return gsi_to_irq[gsi];
- }
-
- mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
-
- if (triggering == ACPI_LEVEL_SENSITIVE) {
- /*
- * For PCI devices assign IRQs in order, avoiding gaps
- * due to unused I/O APIC pins.
- */
- int irq = gsi;
- if (gsi < MAX_GSI_NUM) {
- /*
- * Retain the VIA chipset work-around (gsi > 15), but
- * avoid a problem where the 8254 timer (IRQ0) is setup
- * via an override (so it's not on pin 0 of the ioapic),
- * and at the same time, the pin 0 interrupt is a PCI
- * type. The gsi > 15 test could cause these two pins
- * to be shared as IRQ0, and they are not shareable.
- * So test for this condition, and if necessary, avoid
- * the pin collision.
- */
- if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0))
- gsi = pci_irq++;
- /*
- * Don't assign IRQ used by ACPI SCI
- */
- if (gsi == acpi_gbl_FADT.sci_interrupt)
- gsi = pci_irq++;
- gsi_to_irq[irq] = gsi;
- } else {
- printk(KERN_ERR "GSI %u is too high\n", gsi);
- return gsi;
- }
- }
-
- io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- return gsi;
-}
-
-#endif /* CONFIG_X86_IO_APIC */
-#endif /* CONFIG_ACPI */
--- /dev/null
+/*
+ * Intel Multiprocessor Specification 1.1 and 1.4
+ * compliant MP-table parsing routines.
+ *
+ * (c) 1995 Alan Cox, Building #3 <alan@redhat.com>
+ * (c) 1998, 1999, 2000 Ingo Molnar <mingo@redhat.com>
+ *
+ * Fixes
+ * Erich Boleyn : MP v1.4 and additional changes.
+ * Alan Cox : Added EBDA scanning
+ * Ingo Molnar : various cleanups and rewrites
+ * Maciej W. Rozycki: Bits for default MP configurations
+ * Paul Diefenbaugh: Added full ACPI support
+ */
+
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/bootmem.h>
+#include <linux/kernel_stat.h>
+#include <linux/mc146818rtc.h>
+#include <linux/bitops.h>
+
+#include <asm/smp.h>
+#include <asm/acpi.h>
+#include <asm/mtrr.h>
+#include <asm/mpspec.h>
+#include <asm/io_apic.h>
+
+#include <mach_apic.h>
+#include <mach_apicdef.h>
+#include <mach_mpparse.h>
+#include <bios_ebda.h>
+
+/* Have we found an MP table */
+int smp_found_config;
+unsigned int __cpuinitdata maxcpus = NR_CPUS;
+
+/*
+ * Various Linux-internal data structures created from the
+ * MP-table.
+ */
+int apic_version [MAX_APICS];
+int mp_bus_id_to_type [MAX_MP_BUSSES];
+int mp_bus_id_to_node [MAX_MP_BUSSES];
+int mp_bus_id_to_local [MAX_MP_BUSSES];
+int quad_local_to_mp_bus_id [NR_CPUS/4][4];
+int mp_bus_id_to_pci_bus [MAX_MP_BUSSES] = { [0 ... MAX_MP_BUSSES-1] = -1 };
+static int mp_current_pci_id;
+
+/* I/O APIC entries */
+struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
+
+/* # of MP IRQ source entries */
+struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
+
+/* MP IRQ source entries */
+int mp_irq_entries;
+
+int nr_ioapics;
+
+int pic_mode;
+unsigned long mp_lapic_addr;
+
+unsigned int def_to_bigsmp = 0;
+
+/* Processor that is doing the boot up */
+unsigned int boot_cpu_physical_apicid = -1U;
+/* Internal processor count */
+unsigned int __cpuinitdata num_processors;
+
+/* Bitmask of physically existing CPUs */
+physid_mask_t phys_cpu_present_map;
+
+u8 bios_cpu_apicid[NR_CPUS] = { [0 ... NR_CPUS-1] = BAD_APICID };
+
+/*
+ * Intel MP BIOS table parsing routines:
+ */
+
+
+/*
+ * Checksum an MP configuration block.
+ */
+
+static int __init mpf_checksum(unsigned char *mp, int len)
+{
+ int sum = 0;
+
+ while (len--)
+ sum += *mp++;
+
+ return sum & 0xFF;
+}
+
+/*
+ * Have to match translation table entries to main table entries by counter
+ * hence the mpc_record variable .... can't see a less disgusting way of
+ * doing this ....
+ */
+
+static int mpc_record;
+static struct mpc_config_translation *translation_table[MAX_MPC_ENTRY] __cpuinitdata;
+
+static void __cpuinit MP_processor_info (struct mpc_config_processor *m)
+{
+ int ver, apicid;
+ physid_mask_t phys_cpu;
+
+ if (!(m->mpc_cpuflag & CPU_ENABLED))
+ return;
+
+ apicid = mpc_apic_id(m, translation_table[mpc_record]);
+
+ if (m->mpc_featureflag&(1<<0))
+ Dprintk(" Floating point unit present.\n");
+ if (m->mpc_featureflag&(1<<7))
+ Dprintk(" Machine Exception supported.\n");
+ if (m->mpc_featureflag&(1<<8))
+ Dprintk(" 64 bit compare & exchange supported.\n");
+ if (m->mpc_featureflag&(1<<9))
+ Dprintk(" Internal APIC present.\n");
+ if (m->mpc_featureflag&(1<<11))
+ Dprintk(" SEP present.\n");
+ if (m->mpc_featureflag&(1<<12))
+ Dprintk(" MTRR present.\n");
+ if (m->mpc_featureflag&(1<<13))
+ Dprintk(" PGE present.\n");
+ if (m->mpc_featureflag&(1<<14))
+ Dprintk(" MCA present.\n");
+ if (m->mpc_featureflag&(1<<15))
+ Dprintk(" CMOV present.\n");
+ if (m->mpc_featureflag&(1<<16))
+ Dprintk(" PAT present.\n");
+ if (m->mpc_featureflag&(1<<17))
+ Dprintk(" PSE present.\n");
+ if (m->mpc_featureflag&(1<<18))
+ Dprintk(" PSN present.\n");
+ if (m->mpc_featureflag&(1<<19))
+ Dprintk(" Cache Line Flush Instruction present.\n");
+ /* 20 Reserved */
+ if (m->mpc_featureflag&(1<<21))
+ Dprintk(" Debug Trace and EMON Store present.\n");
+ if (m->mpc_featureflag&(1<<22))
+ Dprintk(" ACPI Thermal Throttle Registers present.\n");
+ if (m->mpc_featureflag&(1<<23))
+ Dprintk(" MMX present.\n");
+ if (m->mpc_featureflag&(1<<24))
+ Dprintk(" FXSR present.\n");
+ if (m->mpc_featureflag&(1<<25))
+ Dprintk(" XMM present.\n");
+ if (m->mpc_featureflag&(1<<26))
+ Dprintk(" Willamette New Instructions present.\n");
+ if (m->mpc_featureflag&(1<<27))
+ Dprintk(" Self Snoop present.\n");
+ if (m->mpc_featureflag&(1<<28))
+ Dprintk(" HT present.\n");
+ if (m->mpc_featureflag&(1<<29))
+ Dprintk(" Thermal Monitor present.\n");
+ /* 30, 31 Reserved */
+
+
+ if (m->mpc_cpuflag & CPU_BOOTPROCESSOR) {
+ Dprintk(" Bootup CPU\n");
+ boot_cpu_physical_apicid = m->mpc_apicid;
+ }
+
+ ver = m->mpc_apicver;
+
+ /*
+ * Validate version
+ */
+ if (ver == 0x0) {
+ printk(KERN_WARNING "BIOS bug, APIC version is 0 for CPU#%d! "
+ "fixing up to 0x10. (tell your hw vendor)\n",
+ m->mpc_apicid);
+ ver = 0x10;
+ }
+ apic_version[m->mpc_apicid] = ver;
+
+ phys_cpu = apicid_to_cpu_present(apicid);
+ physids_or(phys_cpu_present_map, phys_cpu_present_map, phys_cpu);
+
+ if (num_processors >= NR_CPUS) {
+ printk(KERN_WARNING "WARNING: NR_CPUS limit of %i reached."
+ " Processor ignored.\n", NR_CPUS);
+ return;
+ }
+
+ if (num_processors >= maxcpus) {
+ printk(KERN_WARNING "WARNING: maxcpus limit of %i reached."
+ " Processor ignored.\n", maxcpus);
+ return;
+ }
+
+ cpu_set(num_processors, cpu_possible_map);
+ num_processors++;
+
+ /*
+ * Would be preferable to switch to bigsmp when CONFIG_HOTPLUG_CPU=y
+ * but we need to work other dependencies like SMP_SUSPEND etc
+ * before this can be done without some confusion.
+ * if (CPU_HOTPLUG_ENABLED || num_processors > 8)
+ * - Ashok Raj <ashok.raj@intel.com>
+ */
+ if (num_processors > 8) {
+ switch (boot_cpu_data.x86_vendor) {
+ case X86_VENDOR_INTEL:
+ if (!APIC_XAPIC(ver)) {
+ def_to_bigsmp = 0;
+ break;
+ }
+ /* If P4 and above fall through */
+ case X86_VENDOR_AMD:
+ def_to_bigsmp = 1;
+ }
+ }
+ bios_cpu_apicid[num_processors - 1] = m->mpc_apicid;
+}
+
+static void __init MP_bus_info (struct mpc_config_bus *m)
+{
+ char str[7];
+
+ memcpy(str, m->mpc_bustype, 6);
+ str[6] = 0;
+
+ mpc_oem_bus_info(m, str, translation_table[mpc_record]);
+
+#if MAX_MP_BUSSES < 256
+ if (m->mpc_busid >= MAX_MP_BUSSES) {
+ printk(KERN_WARNING "MP table busid value (%d) for bustype %s "
+ " is too large, max. supported is %d\n",
+ m->mpc_busid, str, MAX_MP_BUSSES - 1);
+ return;
+ }
+#endif
+
+ if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA)-1) == 0) {
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_ISA;
+ } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA)-1) == 0) {
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_EISA;
+ } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI)-1) == 0) {
+ mpc_oem_pci_bus(m, translation_table[mpc_record]);
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_PCI;
+ mp_bus_id_to_pci_bus[m->mpc_busid] = mp_current_pci_id;
+ mp_current_pci_id++;
+ } else if (strncmp(str, BUSTYPE_MCA, sizeof(BUSTYPE_MCA)-1) == 0) {
+ mp_bus_id_to_type[m->mpc_busid] = MP_BUS_MCA;
+ } else {
+ printk(KERN_WARNING "Unknown bustype %s - ignoring\n", str);
+ }
+}
+
+static void __init MP_ioapic_info (struct mpc_config_ioapic *m)
+{
+ if (!(m->mpc_flags & MPC_APIC_USABLE))
+ return;
+
+ printk(KERN_INFO "I/O APIC #%d Version %d at 0x%lX.\n",
+ m->mpc_apicid, m->mpc_apicver, m->mpc_apicaddr);
+ if (nr_ioapics >= MAX_IO_APICS) {
+ printk(KERN_CRIT "Max # of I/O APICs (%d) exceeded (found %d).\n",
+ MAX_IO_APICS, nr_ioapics);
+ panic("Recompile kernel with bigger MAX_IO_APICS!.\n");
+ }
+ if (!m->mpc_apicaddr) {
+ printk(KERN_ERR "WARNING: bogus zero I/O APIC address"
+ " found in MP table, skipping!\n");
+ return;
+ }
+ mp_ioapics[nr_ioapics] = *m;
+ nr_ioapics++;
+}
+
+static void __init MP_intsrc_info (struct mpc_config_intsrc *m)
+{
+ mp_irqs [mp_irq_entries] = *m;
+ Dprintk("Int: type %d, pol %d, trig %d, bus %d,"
+ " IRQ %02x, APIC ID %x, APIC INT %02x\n",
+ m->mpc_irqtype, m->mpc_irqflag & 3,
+ (m->mpc_irqflag >> 2) & 3, m->mpc_srcbus,
+ m->mpc_srcbusirq, m->mpc_dstapic, m->mpc_dstirq);
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!!\n");
+}
+
+static void __init MP_lintsrc_info (struct mpc_config_lintsrc *m)
+{
+ Dprintk("Lint: type %d, pol %d, trig %d, bus %d,"
+ " IRQ %02x, APIC ID %x, APIC LINT %02x\n",
+ m->mpc_irqtype, m->mpc_irqflag & 3,
+ (m->mpc_irqflag >> 2) &3, m->mpc_srcbusid,
+ m->mpc_srcbusirq, m->mpc_destapic, m->mpc_destapiclint);
+}
+
+#ifdef CONFIG_X86_NUMAQ
+static void __init MP_translation_info (struct mpc_config_translation *m)
+{
+ printk(KERN_INFO "Translation: record %d, type %d, quad %d, global %d, local %d\n", mpc_record, m->trans_type, m->trans_quad, m->trans_global, m->trans_local);
+
+ if (mpc_record >= MAX_MPC_ENTRY)
+ printk(KERN_ERR "MAX_MPC_ENTRY exceeded!\n");
+ else
+ translation_table[mpc_record] = m; /* stash this for later */
+ if (m->trans_quad < MAX_NUMNODES && !node_online(m->trans_quad))
+ node_set_online(m->trans_quad);
+}
+
+/*
+ * Read/parse the MPC oem tables
+ */
+
+static void __init smp_read_mpc_oem(struct mp_config_oemtable *oemtable, \
+ unsigned short oemsize)
+{
+ int count = sizeof (*oemtable); /* the header size */
+ unsigned char *oemptr = ((unsigned char *)oemtable)+count;
+
+ mpc_record = 0;
+ printk(KERN_INFO "Found an OEM MPC table at %8p - parsing it ... \n", oemtable);
+ if (memcmp(oemtable->oem_signature,MPC_OEM_SIGNATURE,4))
+ {
+ printk(KERN_WARNING "SMP mpc oemtable: bad signature [%c%c%c%c]!\n",
+ oemtable->oem_signature[0],
+ oemtable->oem_signature[1],
+ oemtable->oem_signature[2],
+ oemtable->oem_signature[3]);
+ return;
+ }
+ if (mpf_checksum((unsigned char *)oemtable,oemtable->oem_length))
+ {
+ printk(KERN_WARNING "SMP oem mptable: checksum error!\n");
+ return;
+ }
+ while (count < oemtable->oem_length) {
+ switch (*oemptr) {
+ case MP_TRANSLATION:
+ {
+ struct mpc_config_translation *m=
+ (struct mpc_config_translation *)oemptr;
+ MP_translation_info(m);
+ oemptr += sizeof(*m);
+ count += sizeof(*m);
+ ++mpc_record;
+ break;
+ }
+ default:
+ {
+ printk(KERN_WARNING "Unrecognised OEM table entry type! - %d\n", (int) *oemptr);
+ return;
+ }
+ }
+ }
+}
+
+static inline void mps_oem_check(struct mp_config_table *mpc, char *oem,
+ char *productid)
+{
+ if (strncmp(oem, "IBM NUMA", 8))
+ printk("Warning! May not be a NUMA-Q system!\n");
+ if (mpc->mpc_oemptr)
+ smp_read_mpc_oem((struct mp_config_oemtable *) mpc->mpc_oemptr,
+ mpc->mpc_oemsize);
+}
+#endif /* CONFIG_X86_NUMAQ */
+
+/*
+ * Read/parse the MPC
+ */
+
+static int __init smp_read_mpc(struct mp_config_table *mpc)
+{
+ char str[16];
+ char oem[10];
+ int count=sizeof(*mpc);
+ unsigned char *mpt=((unsigned char *)mpc)+count;
+
+ if (memcmp(mpc->mpc_signature,MPC_SIGNATURE,4)) {
+ printk(KERN_ERR "SMP mptable: bad signature [0x%x]!\n",
+ *(u32 *)mpc->mpc_signature);
+ return 0;
+ }
+ if (mpf_checksum((unsigned char *)mpc,mpc->mpc_length)) {
+ printk(KERN_ERR "SMP mptable: checksum error!\n");
+ return 0;
+ }
+ if (mpc->mpc_spec!=0x01 && mpc->mpc_spec!=0x04) {
+ printk(KERN_ERR "SMP mptable: bad table version (%d)!!\n",
+ mpc->mpc_spec);
+ return 0;
+ }
+ if (!mpc->mpc_lapic) {
+ printk(KERN_ERR "SMP mptable: null local APIC address!\n");
+ return 0;
+ }
+ memcpy(oem,mpc->mpc_oem,8);
+ oem[8]=0;
+ printk(KERN_INFO "OEM ID: %s ",oem);
+
+ memcpy(str,mpc->mpc_productid,12);
+ str[12]=0;
+ printk("Product ID: %s ",str);
+
+ mps_oem_check(mpc, oem, str);
+
+ printk("APIC at: 0x%lX\n",mpc->mpc_lapic);
+
+ /*
+ * Save the local APIC address (it might be non-default) -- but only
+ * if we're not using ACPI.
+ */
+ if (!acpi_lapic)
+ mp_lapic_addr = mpc->mpc_lapic;
+
+ /*
+ * Now process the configuration blocks.
+ */
+ mpc_record = 0;
+ while (count < mpc->mpc_length) {
+ switch(*mpt) {
+ case MP_PROCESSOR:
+ {
+ struct mpc_config_processor *m=
+ (struct mpc_config_processor *)mpt;
+ /* ACPI may have already provided this data */
+ if (!acpi_lapic)
+ MP_processor_info(m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
+ break;
+ }
+ case MP_BUS:
+ {
+ struct mpc_config_bus *m=
+ (struct mpc_config_bus *)mpt;
+ MP_bus_info(m);
+ mpt += sizeof(*m);
+ count += sizeof(*m);
+ break;
+ }
+ case MP_IOAPIC:
+ {
+ struct mpc_config_ioapic *m=
+ (struct mpc_config_ioapic *)mpt;
+ MP_ioapic_info(m);
+ mpt+=sizeof(*m);
+ count+=sizeof(*m);
+ break;
+ }
+ case MP_INTSRC:
+ {
+ struct mpc_config_intsrc *m=
+ (struct mpc_config_intsrc *)mpt;
+
+ MP_intsrc_info(m);
+ mpt+=sizeof(*m);
+ count+=sizeof(*m);
+ break;
+ }
+ case MP_LINTSRC:
+ {
+ struct mpc_config_lintsrc *m=
+ (struct mpc_config_lintsrc *)mpt;
+ MP_lintsrc_info(m);
+ mpt+=sizeof(*m);
+ count+=sizeof(*m);
+ break;
+ }
+ default:
+ {
+ count = mpc->mpc_length;
+ break;
+ }
+ }
+ ++mpc_record;
+ }
+ setup_apic_routing();
+ if (!num_processors)
+ printk(KERN_ERR "SMP mptable: no processors registered!\n");
+ return num_processors;
+}
+
+static int __init ELCR_trigger(unsigned int irq)
+{
+ unsigned int port;
+
+ port = 0x4d0 + (irq >> 3);
+ return (inb(port) >> (irq & 7)) & 1;
+}
+
+static void __init construct_default_ioirq_mptable(int mpc_default_type)
+{
+ struct mpc_config_intsrc intsrc;
+ int i;
+ int ELCR_fallback = 0;
+
+ intsrc.mpc_type = MP_INTSRC;
+ intsrc.mpc_irqflag = 0; /* conforming */
+ intsrc.mpc_srcbus = 0;
+ intsrc.mpc_dstapic = mp_ioapics[0].mpc_apicid;
+
+ intsrc.mpc_irqtype = mp_INT;
+
+ /*
+ * If true, we have an ISA/PCI system with no IRQ entries
+ * in the MP table. To prevent the PCI interrupts from being set up
+ * incorrectly, we try to use the ELCR. The sanity check to see if
+ * there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
+ * never be level sensitive, so we simply see if the ELCR agrees.
+ * If it does, we assume it's valid.
+ */
+ if (mpc_default_type == 5) {
+ printk(KERN_INFO "ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
+
+ if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) || ELCR_trigger(13))
+ printk(KERN_WARNING "ELCR contains invalid data... not using ELCR\n");
+ else {
+ printk(KERN_INFO "Using ELCR to identify PCI interrupts\n");
+ ELCR_fallback = 1;
+ }
+ }
+
+ for (i = 0; i < 16; i++) {
+ switch (mpc_default_type) {
+ case 2:
+ if (i == 0 || i == 13)
+ continue; /* IRQ0 & IRQ13 not connected */
+ /* fall through */
+ default:
+ if (i == 2)
+ continue; /* IRQ2 is never connected */
+ }
+
+ if (ELCR_fallback) {
+ /*
+ * If the ELCR indicates a level-sensitive interrupt, we
+ * copy that information over to the MP table in the
+ * irqflag field (level sensitive, active high polarity).
+ */
+ if (ELCR_trigger(i))
+ intsrc.mpc_irqflag = 13;
+ else
+ intsrc.mpc_irqflag = 0;
+ }
+
+ intsrc.mpc_srcbusirq = i;
+ intsrc.mpc_dstirq = i ? i : 2; /* IRQ0 to INTIN2 */
+ MP_intsrc_info(&intsrc);
+ }
+
+ intsrc.mpc_irqtype = mp_ExtINT;
+ intsrc.mpc_srcbusirq = 0;
+ intsrc.mpc_dstirq = 0; /* 8259A to INTIN0 */
+ MP_intsrc_info(&intsrc);
+}
+
+static inline void __init construct_default_ISA_mptable(int mpc_default_type)
+{
+ struct mpc_config_processor processor;
+ struct mpc_config_bus bus;
+ struct mpc_config_ioapic ioapic;
+ struct mpc_config_lintsrc lintsrc;
+ int linttypes[2] = { mp_ExtINT, mp_NMI };
+ int i;
+
+ /*
+ * local APIC has default address
+ */
+ mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
+
+ /*
+ * 2 CPUs, numbered 0 & 1.
+ */
+ processor.mpc_type = MP_PROCESSOR;
+ /* Either an integrated APIC or a discrete 82489DX. */
+ processor.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ processor.mpc_cpuflag = CPU_ENABLED;
+ processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
+ (boot_cpu_data.x86_model << 4) |
+ boot_cpu_data.x86_mask;
+ processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+ processor.mpc_reserved[0] = 0;
+ processor.mpc_reserved[1] = 0;
+ for (i = 0; i < 2; i++) {
+ processor.mpc_apicid = i;
+ MP_processor_info(&processor);
+ }
+
+ bus.mpc_type = MP_BUS;
+ bus.mpc_busid = 0;
+ switch (mpc_default_type) {
+ default:
+ printk("???\n");
+ printk(KERN_ERR "Unknown standard configuration %d\n",
+ mpc_default_type);
+ /* fall through */
+ case 1:
+ case 5:
+ memcpy(bus.mpc_bustype, "ISA ", 6);
+ break;
+ case 2:
+ case 6:
+ case 3:
+ memcpy(bus.mpc_bustype, "EISA ", 6);
+ break;
+ case 4:
+ case 7:
+ memcpy(bus.mpc_bustype, "MCA ", 6);
+ }
+ MP_bus_info(&bus);
+ if (mpc_default_type > 4) {
+ bus.mpc_busid = 1;
+ memcpy(bus.mpc_bustype, "PCI ", 6);
+ MP_bus_info(&bus);
+ }
+
+ ioapic.mpc_type = MP_IOAPIC;
+ ioapic.mpc_apicid = 2;
+ ioapic.mpc_apicver = mpc_default_type > 4 ? 0x10 : 0x01;
+ ioapic.mpc_flags = MPC_APIC_USABLE;
+ ioapic.mpc_apicaddr = 0xFEC00000;
+ MP_ioapic_info(&ioapic);
+
+ /*
+ * We set up most of the low 16 IO-APIC pins according to MPS rules.
+ */
+ construct_default_ioirq_mptable(mpc_default_type);
+
+ lintsrc.mpc_type = MP_LINTSRC;
+ lintsrc.mpc_irqflag = 0; /* conforming */
+ lintsrc.mpc_srcbusid = 0;
+ lintsrc.mpc_srcbusirq = 0;
+ lintsrc.mpc_destapic = MP_APIC_ALL;
+ for (i = 0; i < 2; i++) {
+ lintsrc.mpc_irqtype = linttypes[i];
+ lintsrc.mpc_destapiclint = i;
+ MP_lintsrc_info(&lintsrc);
+ }
+}
+
+static struct intel_mp_floating *mpf_found;
+
+/*
+ * Scan the memory blocks for an SMP configuration block.
+ */
+void __init get_smp_config (void)
+{
+ struct intel_mp_floating *mpf = mpf_found;
+
+ /*
+ * ACPI supports both logical (e.g. Hyper-Threading) and physical
+ * processors, where MPS only supports physical.
+ */
+ if (acpi_lapic && acpi_ioapic) {
+ printk(KERN_INFO "Using ACPI (MADT) for SMP configuration information\n");
+ return;
+ }
+ else if (acpi_lapic)
+ printk(KERN_INFO "Using ACPI for processor (LAPIC) configuration information\n");
+
+ printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", mpf->mpf_specification);
+ if (mpf->mpf_feature2 & (1<<7)) {
+ printk(KERN_INFO " IMCR and PIC compatibility mode.\n");
+ pic_mode = 1;
+ } else {
+ printk(KERN_INFO " Virtual Wire compatibility mode.\n");
+ pic_mode = 0;
+ }
+
+ /*
+ * Now see if we need to read further.
+ */
+ if (mpf->mpf_feature1 != 0) {
+
+ printk(KERN_INFO "Default MP configuration #%d\n", mpf->mpf_feature1);
+ construct_default_ISA_mptable(mpf->mpf_feature1);
+
+ } else if (mpf->mpf_physptr) {
+
+ /*
+ * Read the physical hardware table. Anything here will
+ * override the defaults.
+ */
+ if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr))) {
+ smp_found_config = 0;
+ printk(KERN_ERR "BIOS bug, MP table errors detected!...\n");
+ printk(KERN_ERR "... disabling SMP support. (tell your hw vendor)\n");
+ return;
+ }
+ /*
+ * If there are no explicit MP IRQ entries, then we are
+ * broken. We set up most of the low 16 IO-APIC pins to
+ * ISA defaults and hope it will work.
+ */
+ if (!mp_irq_entries) {
+ struct mpc_config_bus bus;
+
+ printk(KERN_ERR "BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
+
+ bus.mpc_type = MP_BUS;
+ bus.mpc_busid = 0;
+ memcpy(bus.mpc_bustype, "ISA ", 6);
+ MP_bus_info(&bus);
+
+ construct_default_ioirq_mptable(0);
+ }
+
+ } else
+ BUG();
+
+ printk(KERN_INFO "Processors: %d\n", num_processors);
+ /*
+ * Only use the first configuration found.
+ */
+}
+
+static int __init smp_scan_config (unsigned long base, unsigned long length)
+{
+ unsigned long *bp = phys_to_virt(base);
+ struct intel_mp_floating *mpf;
+
+ Dprintk("Scan SMP from %p for %ld bytes.\n", bp,length);
+ if (sizeof(*mpf) != 16)
+ printk("Error: MPF size\n");
+
+ while (length > 0) {
+ mpf = (struct intel_mp_floating *)bp;
+ if ((*bp == SMP_MAGIC_IDENT) &&
+ (mpf->mpf_length == 1) &&
+ !mpf_checksum((unsigned char *)bp, 16) &&
+ ((mpf->mpf_specification == 1)
+ || (mpf->mpf_specification == 4)) ) {
+
+ smp_found_config = 1;
+ printk(KERN_INFO "found SMP MP-table at %08lx\n",
+ virt_to_phys(mpf));
+ reserve_bootmem(virt_to_phys(mpf), PAGE_SIZE);
+ if (mpf->mpf_physptr) {
+ /*
+ * We cannot access to MPC table to compute
+ * table size yet, as only few megabytes from
+ * the bottom is mapped now.
+ * PC-9800's MPC table places on the very last
+ * of physical memory; so that simply reserving
+ * PAGE_SIZE from mpg->mpf_physptr yields BUG()
+ * in reserve_bootmem.
+ */
+ unsigned long size = PAGE_SIZE;
+ unsigned long end = max_low_pfn * PAGE_SIZE;
+ if (mpf->mpf_physptr + size > end)
+ size = end - mpf->mpf_physptr;
+ reserve_bootmem(mpf->mpf_physptr, size);
+ }
+
+ mpf_found = mpf;
+ return 1;
+ }
+ bp += 4;
+ length -= 16;
+ }
+ return 0;
+}
+
+void __init find_smp_config (void)
+{
+ unsigned int address;
+
+ /*
+ * FIXME: Linux assumes you have 640K of base ram..
+ * this continues the error...
+ *
+ * 1) Scan the bottom 1K for a signature
+ * 2) Scan the top 1K of base RAM
+ * 3) Scan the 64K of bios
+ */
+ if (smp_scan_config(0x0,0x400) ||
+ smp_scan_config(639*0x400,0x400) ||
+ smp_scan_config(0xF0000,0x10000))
+ return;
+ /*
+ * If it is an SMP machine we should know now, unless the
+ * configuration is in an EISA/MCA bus machine with an
+ * extended bios data area.
+ *
+ * there is a real-mode segmented pointer pointing to the
+ * 4K EBDA area at 0x40E, calculate and scan it here.
+ *
+ * NOTE! There are Linux loaders that will corrupt the EBDA
+ * area, and as such this kind of SMP config may be less
+ * trustworthy, simply because the SMP table may have been
+ * stomped on during early boot. These loaders are buggy and
+ * should be fixed.
+ *
+ * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
+ */
+
+ address = get_bios_ebda();
+ if (address)
+ smp_scan_config(address, 0x400);
+}
+
+int es7000_plat;
+
+/* --------------------------------------------------------------------------
+ ACPI-based MP Configuration
+ -------------------------------------------------------------------------- */
+
+#ifdef CONFIG_ACPI
+
+void __init mp_register_lapic_address(u64 address)
+{
+ mp_lapic_addr = (unsigned long) address;
+
+ set_fixmap_nocache(FIX_APIC_BASE, mp_lapic_addr);
+
+ if (boot_cpu_physical_apicid == -1U)
+ boot_cpu_physical_apicid = GET_APIC_ID(apic_read(APIC_ID));
+
+ Dprintk("Boot CPU = %d\n", boot_cpu_physical_apicid);
+}
+
+void __cpuinit mp_register_lapic (u8 id, u8 enabled)
+{
+ struct mpc_config_processor processor;
+ int boot_cpu = 0;
+
+ if (MAX_APICS - id <= 0) {
+ printk(KERN_WARNING "Processor #%d invalid (max %d)\n",
+ id, MAX_APICS);
+ return;
+ }
+
+ if (id == boot_cpu_physical_apicid)
+ boot_cpu = 1;
+
+ processor.mpc_type = MP_PROCESSOR;
+ processor.mpc_apicid = id;
+ processor.mpc_apicver = GET_APIC_VERSION(apic_read(APIC_LVR));
+ processor.mpc_cpuflag = (enabled ? CPU_ENABLED : 0);
+ processor.mpc_cpuflag |= (boot_cpu ? CPU_BOOTPROCESSOR : 0);
+ processor.mpc_cpufeature = (boot_cpu_data.x86 << 8) |
+ (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
+ processor.mpc_featureflag = boot_cpu_data.x86_capability[0];
+ processor.mpc_reserved[0] = 0;
+ processor.mpc_reserved[1] = 0;
+
+ MP_processor_info(&processor);
+}
+
+#ifdef CONFIG_X86_IO_APIC
+
+#define MP_ISA_BUS 0
+#define MP_MAX_IOAPIC_PIN 127
+
+static struct mp_ioapic_routing {
+ int apic_id;
+ int gsi_base;
+ int gsi_end;
+ u32 pin_programmed[4];
+} mp_ioapic_routing[MAX_IO_APICS];
+
+static int mp_find_ioapic (int gsi)
+{
+ int i = 0;
+
+ /* Find the IOAPIC that manages this GSI. */
+ for (i = 0; i < nr_ioapics; i++) {
+ if ((gsi >= mp_ioapic_routing[i].gsi_base)
+ && (gsi <= mp_ioapic_routing[i].gsi_end))
+ return i;
+ }
+
+ printk(KERN_ERR "ERROR: Unable to locate IOAPIC for GSI %d\n", gsi);
+
+ return -1;
+}
+
+void __init mp_register_ioapic(u8 id, u32 address, u32 gsi_base)
+{
+ int idx = 0;
+ int tmpid;
+
+ if (nr_ioapics >= MAX_IO_APICS) {
+ printk(KERN_ERR "ERROR: Max # of I/O APICs (%d) exceeded "
+ "(found %d)\n", MAX_IO_APICS, nr_ioapics);
+ panic("Recompile kernel with bigger MAX_IO_APICS!\n");
+ }
+ if (!address) {
+ printk(KERN_ERR "WARNING: Bogus (zero) I/O APIC address"
+ " found in MADT table, skipping!\n");
+ return;
+ }
+
+ idx = nr_ioapics++;
+
+ mp_ioapics[idx].mpc_type = MP_IOAPIC;
+ mp_ioapics[idx].mpc_flags = MPC_APIC_USABLE;
+ mp_ioapics[idx].mpc_apicaddr = address;
+
+ set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ && !APIC_XAPIC(apic_version[boot_cpu_physical_apicid]))
+ tmpid = io_apic_get_unique_id(idx, id);
+ else
+ tmpid = id;
+ if (tmpid == -1) {
+ nr_ioapics--;
+ return;
+ }
+ mp_ioapics[idx].mpc_apicid = tmpid;
+ mp_ioapics[idx].mpc_apicver = io_apic_get_version(idx);
+
+ /*
+ * Build basic GSI lookup table to facilitate gsi->io_apic lookups
+ * and to prevent reprogramming of IOAPIC pins (PCI GSIs).
+ */
+ mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mpc_apicid;
+ mp_ioapic_routing[idx].gsi_base = gsi_base;
+ mp_ioapic_routing[idx].gsi_end = gsi_base +
+ io_apic_get_redir_entries(idx);
+
+ printk("IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, "
+ "GSI %d-%d\n", idx, mp_ioapics[idx].mpc_apicid,
+ mp_ioapics[idx].mpc_apicver, mp_ioapics[idx].mpc_apicaddr,
+ mp_ioapic_routing[idx].gsi_base,
+ mp_ioapic_routing[idx].gsi_end);
+}
+
+void __init
+mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi)
+{
+ struct mpc_config_intsrc intsrc;
+ int ioapic = -1;
+ int pin = -1;
+
+ /*
+ * Convert 'gsi' to 'ioapic.pin'.
+ */
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0)
+ return;
+ pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+ /*
+ * TBD: This check is for faulty timer entries, where the override
+ * erroneously sets the trigger to level, resulting in a HUGE
+ * increase of timer interrupts!
+ */
+ if ((bus_irq == 0) && (trigger == 3))
+ trigger = 1;
+
+ intsrc.mpc_type = MP_INTSRC;
+ intsrc.mpc_irqtype = mp_INT;
+ intsrc.mpc_irqflag = (trigger << 2) | polarity;
+ intsrc.mpc_srcbus = MP_ISA_BUS;
+ intsrc.mpc_srcbusirq = bus_irq; /* IRQ */
+ intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid; /* APIC ID */
+ intsrc.mpc_dstirq = pin; /* INTIN# */
+
+ Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, %d-%d\n",
+ intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+ (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
+ intsrc.mpc_srcbusirq, intsrc.mpc_dstapic, intsrc.mpc_dstirq);
+
+ mp_irqs[mp_irq_entries] = intsrc;
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!\n");
+}
+
+void __init mp_config_acpi_legacy_irqs (void)
+{
+ struct mpc_config_intsrc intsrc;
+ int i = 0;
+ int ioapic = -1;
+
+ /*
+ * Fabricate the legacy ISA bus (bus #31).
+ */
+ mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
+ Dprintk("Bus #%d is ISA\n", MP_ISA_BUS);
+
+ /*
+ * Older generations of ES7000 have no legacy identity mappings
+ */
+ if (es7000_plat == 1)
+ return;
+
+ /*
+ * Locate the IOAPIC that manages the ISA IRQs (0-15).
+ */
+ ioapic = mp_find_ioapic(0);
+ if (ioapic < 0)
+ return;
+
+ intsrc.mpc_type = MP_INTSRC;
+ intsrc.mpc_irqflag = 0; /* Conforming */
+ intsrc.mpc_srcbus = MP_ISA_BUS;
+ intsrc.mpc_dstapic = mp_ioapics[ioapic].mpc_apicid;
+
+ /*
+ * Use the default configuration for the IRQs 0-15. Unless
+ * overriden by (MADT) interrupt source override entries.
+ */
+ for (i = 0; i < 16; i++) {
+ int idx;
+
+ for (idx = 0; idx < mp_irq_entries; idx++) {
+ struct mpc_config_intsrc *irq = mp_irqs + idx;
+
+ /* Do we already have a mapping for this ISA IRQ? */
+ if (irq->mpc_srcbus == MP_ISA_BUS && irq->mpc_srcbusirq == i)
+ break;
+
+ /* Do we already have a mapping for this IOAPIC pin */
+ if ((irq->mpc_dstapic == intsrc.mpc_dstapic) &&
+ (irq->mpc_dstirq == i))
+ break;
+ }
+
+ if (idx != mp_irq_entries) {
+ printk(KERN_DEBUG "ACPI: IRQ%d used by override.\n", i);
+ continue; /* IRQ already used */
+ }
+
+ intsrc.mpc_irqtype = mp_INT;
+ intsrc.mpc_srcbusirq = i; /* Identity mapped */
+ intsrc.mpc_dstirq = i;
+
+ Dprintk("Int: type %d, pol %d, trig %d, bus %d, irq %d, "
+ "%d-%d\n", intsrc.mpc_irqtype, intsrc.mpc_irqflag & 3,
+ (intsrc.mpc_irqflag >> 2) & 3, intsrc.mpc_srcbus,
+ intsrc.mpc_srcbusirq, intsrc.mpc_dstapic,
+ intsrc.mpc_dstirq);
+
+ mp_irqs[mp_irq_entries] = intsrc;
+ if (++mp_irq_entries == MAX_IRQ_SOURCES)
+ panic("Max # of irq sources exceeded!\n");
+ }
+}
+
+#define MAX_GSI_NUM 4096
+
+int mp_register_gsi(u32 gsi, int triggering, int polarity)
+{
+ int ioapic = -1;
+ int ioapic_pin = 0;
+ int idx, bit = 0;
+ static int pci_irq = 16;
+ /*
+ * Mapping between Global System Interrups, which
+ * represent all possible interrupts, and IRQs
+ * assigned to actual devices.
+ */
+ static int gsi_to_irq[MAX_GSI_NUM];
+
+ /* Don't set up the ACPI SCI because it's already set up */
+ if (acpi_gbl_FADT.sci_interrupt == gsi)
+ return gsi;
+
+ ioapic = mp_find_ioapic(gsi);
+ if (ioapic < 0) {
+ printk(KERN_WARNING "No IOAPIC for GSI %u\n", gsi);
+ return gsi;
+ }
+
+ ioapic_pin = gsi - mp_ioapic_routing[ioapic].gsi_base;
+
+ if (ioapic_renumber_irq)
+ gsi = ioapic_renumber_irq(ioapic, gsi);
+
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ bit = ioapic_pin % 32;
+ idx = (ioapic_pin < 32) ? 0 : (ioapic_pin / 32);
+ if (idx > 3) {
+ printk(KERN_ERR "Invalid reference to IOAPIC pin "
+ "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ ioapic_pin);
+ return gsi;
+ }
+ if ((1<<bit) & mp_ioapic_routing[ioapic].pin_programmed[idx]) {
+ Dprintk(KERN_DEBUG "Pin %d-%d already programmed\n",
+ mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
+ return gsi_to_irq[gsi];
+ }
+
+ mp_ioapic_routing[ioapic].pin_programmed[idx] |= (1<<bit);
+
+ if (triggering == ACPI_LEVEL_SENSITIVE) {
+ /*
+ * For PCI devices assign IRQs in order, avoiding gaps
+ * due to unused I/O APIC pins.
+ */
+ int irq = gsi;
+ if (gsi < MAX_GSI_NUM) {
+ /*
+ * Retain the VIA chipset work-around (gsi > 15), but
+ * avoid a problem where the 8254 timer (IRQ0) is setup
+ * via an override (so it's not on pin 0 of the ioapic),
+ * and at the same time, the pin 0 interrupt is a PCI
+ * type. The gsi > 15 test could cause these two pins
+ * to be shared as IRQ0, and they are not shareable.
+ * So test for this condition, and if necessary, avoid
+ * the pin collision.
+ */
+ if (gsi > 15 || (gsi == 0 && !timer_uses_ioapic_pin_0))
+ gsi = pci_irq++;
+ /*
+ * Don't assign IRQ used by ACPI SCI
+ */
+ if (gsi == acpi_gbl_FADT.sci_interrupt)
+ gsi = pci_irq++;
+ gsi_to_irq[irq] = gsi;
+ } else {
+ printk(KERN_ERR "GSI %u is too high\n", gsi);
+ return gsi;
+ }
+ }
+
+ io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
+ triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ return gsi;
+}
+
+#endif /* CONFIG_X86_IO_APIC */
+#endif /* CONFIG_ACPI */
projects / ~emulex / infiniband.git / commitdiff