obj-y := clock.o cpu.o devices.o devices-common.o
obj-$(CONFIG_UX500_SOC_DB5500) += cpu-db5500.o dma-db5500.o
obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o prcmu.o
-obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o
+obj-$(CONFIG_MACH_U8500_MOP) += board-mop500.o board-mop500-sdi.o \
+ board-mop500-keypads.o
obj-$(CONFIG_MACH_U5500) += board-u5500.o board-u5500-sdi.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
--- /dev/null
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * Keypad layouts for various boards
+ */
+
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/input/matrix_keypad.h>
+
+#include <plat/pincfg.h>
+#include <plat/ske.h>
+
+#include <mach/devices.h>
+#include <mach/hardware.h>
+
+#include "devices-db8500.h"
+#include "board-mop500.h"
+
+/* STMPE/SKE keypad use this key layout */
+static const unsigned int mop500_keymap[] = {
+ KEY(2, 5, KEY_END),
+ KEY(4, 1, KEY_POWER),
+ KEY(3, 5, KEY_VOLUMEDOWN),
+ KEY(1, 3, KEY_3),
+ KEY(5, 2, KEY_RIGHT),
+ KEY(5, 0, KEY_9),
+
+ KEY(0, 5, KEY_MENU),
+ KEY(7, 6, KEY_ENTER),
+ KEY(4, 5, KEY_0),
+ KEY(6, 7, KEY_2),
+ KEY(3, 4, KEY_UP),
+ KEY(3, 3, KEY_DOWN),
+
+ KEY(6, 4, KEY_SEND),
+ KEY(6, 2, KEY_BACK),
+ KEY(4, 2, KEY_VOLUMEUP),
+ KEY(5, 5, KEY_1),
+ KEY(4, 3, KEY_LEFT),
+ KEY(3, 2, KEY_7),
+};
+
+static const struct matrix_keymap_data mop500_keymap_data = {
+ .keymap = mop500_keymap,
+ .keymap_size = ARRAY_SIZE(mop500_keymap),
+};
+
+/*
+ * Nomadik SKE keypad
+ */
+#define ROW_PIN_I0 164
+#define ROW_PIN_I1 163
+#define ROW_PIN_I2 162
+#define ROW_PIN_I3 161
+#define ROW_PIN_I4 156
+#define ROW_PIN_I5 155
+#define ROW_PIN_I6 154
+#define ROW_PIN_I7 153
+#define COL_PIN_O0 168
+#define COL_PIN_O1 167
+#define COL_PIN_O2 166
+#define COL_PIN_O3 165
+#define COL_PIN_O4 160
+#define COL_PIN_O5 159
+#define COL_PIN_O6 158
+#define COL_PIN_O7 157
+
+#define SKE_KPD_MAX_ROWS 8
+#define SKE_KPD_MAX_COLS 8
+
+static int ske_kp_rows[] = {
+ ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
+ ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
+};
+
+/*
+ * ske_set_gpio_row: request and set gpio rows
+ */
+static int ske_set_gpio_row(int gpio)
+{
+ int ret;
+
+ ret = gpio_request(gpio, "ske-kp");
+ if (ret < 0) {
+ pr_err("ske_set_gpio_row: gpio request failed\n");
+ return ret;
+ }
+
+ ret = gpio_direction_output(gpio, 1);
+ if (ret < 0) {
+ pr_err("ske_set_gpio_row: gpio direction failed\n");
+ gpio_free(gpio);
+ }
+
+ return ret;
+}
+
+/*
+ * ske_kp_init - enable the gpio configuration
+ */
+static int ske_kp_init(void)
+{
+ int ret, i;
+
+ for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
+ ret = ske_set_gpio_row(ske_kp_rows[i]);
+ if (ret < 0) {
+ pr_err("ske_kp_init: failed init\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static struct ske_keypad_platform_data ske_keypad_board = {
+ .init = ske_kp_init,
+ .keymap_data = &mop500_keymap_data,
+ .no_autorepeat = true,
+ .krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */
+ .kcol = SKE_KPD_MAX_COLS,
+ .debounce_ms = 40, /* in millisecs */
+};
+
+void mop500_keypad_init(void)
+{
+ db8500_add_ske_keypad(&ske_keypad_board);
+}
#include <plat/pincfg.h>
#include <plat/i2c.h>
-#include <plat/ske.h>
#include <mach/hardware.h>
#include <mach/setup.h>
db8500_add_i2c3(&u8500_i2c3_data);
}
-static const unsigned int ux500_keymap[] = {
- KEY(2, 5, KEY_END),
- KEY(4, 1, KEY_POWER),
- KEY(3, 5, KEY_VOLUMEDOWN),
- KEY(1, 3, KEY_3),
- KEY(5, 2, KEY_RIGHT),
- KEY(5, 0, KEY_9),
-
- KEY(0, 5, KEY_MENU),
- KEY(7, 6, KEY_ENTER),
- KEY(4, 5, KEY_0),
- KEY(6, 7, KEY_2),
- KEY(3, 4, KEY_UP),
- KEY(3, 3, KEY_DOWN),
-
- KEY(6, 4, KEY_SEND),
- KEY(6, 2, KEY_BACK),
- KEY(4, 2, KEY_VOLUMEUP),
- KEY(5, 5, KEY_1),
- KEY(4, 3, KEY_LEFT),
- KEY(3, 2, KEY_7),
-};
-
-static const struct matrix_keymap_data ux500_keymap_data = {
- .keymap = ux500_keymap,
- .keymap_size = ARRAY_SIZE(ux500_keymap),
-};
-
-/*
- * Nomadik SKE keypad
- */
-#define ROW_PIN_I0 164
-#define ROW_PIN_I1 163
-#define ROW_PIN_I2 162
-#define ROW_PIN_I3 161
-#define ROW_PIN_I4 156
-#define ROW_PIN_I5 155
-#define ROW_PIN_I6 154
-#define ROW_PIN_I7 153
-#define COL_PIN_O0 168
-#define COL_PIN_O1 167
-#define COL_PIN_O2 166
-#define COL_PIN_O3 165
-#define COL_PIN_O4 160
-#define COL_PIN_O5 159
-#define COL_PIN_O6 158
-#define COL_PIN_O7 157
-
-#define SKE_KPD_MAX_ROWS 8
-#define SKE_KPD_MAX_COLS 8
-
-static int ske_kp_rows[] = {
- ROW_PIN_I0, ROW_PIN_I1, ROW_PIN_I2, ROW_PIN_I3,
- ROW_PIN_I4, ROW_PIN_I5, ROW_PIN_I6, ROW_PIN_I7,
-};
-
-/*
- * ske_set_gpio_row: request and set gpio rows
- */
-static int ske_set_gpio_row(int gpio)
-{
- int ret;
-
- ret = gpio_request(gpio, "ske-kp");
- if (ret < 0) {
- pr_err("ske_set_gpio_row: gpio request failed\n");
- return ret;
- }
-
- ret = gpio_direction_output(gpio, 1);
- if (ret < 0) {
- pr_err("ske_set_gpio_row: gpio direction failed\n");
- gpio_free(gpio);
- }
-
- return ret;
-}
-
-/*
- * ske_kp_init - enable the gpio configuration
- */
-static int ske_kp_init(void)
-{
- int ret, i;
-
- for (i = 0; i < SKE_KPD_MAX_ROWS; i++) {
- ret = ske_set_gpio_row(ske_kp_rows[i]);
- if (ret < 0) {
- pr_err("ske_kp_init: failed init\n");
- return ret;
- }
- }
-
- return 0;
-}
-
-static struct ske_keypad_platform_data ske_keypad_board = {
- .init = ske_kp_init,
- .keymap_data = &ux500_keymap_data,
- .no_autorepeat = true,
- .krow = SKE_KPD_MAX_ROWS, /* 8x8 matrix */
- .kcol = SKE_KPD_MAX_COLS,
- .debounce_ms = 40, /* in millsecs */
-};
-
-
-
/* add any platform devices here - TODO */
static struct platform_device *platform_devs[] __initdata = {
- &ux500_ske_keypad_device,
};
static void __init mop500_spi_init(void)
mop500_spi_init();
mop500_uart_init();
+ mop500_keypad_init();
+
platform_device_register(&ab8500_device);
i2c_register_board_info(0, mop500_i2c0_devices,
extern void mop500_sdi_init(void);
extern void mop500_sdi_tc35892_init(void);
+extern void mop500_keypad_init(void);
#endif
},
};
-struct platform_device ux500_ske_keypad_device = {
+struct platform_device u8500_ske_keypad_device = {
.name = "nmk-ske-keypad",
.id = -1,
.num_resources = ARRAY_SIZE(keypad_resources),
projects / ~shefty / rdma-dev.git / commitdiff