static DEFINE_SEMAPHORE(dt9812_mutex);
-static const struct usb_device_id dt9812_table[] = {
- {USB_DEVICE(0x0867, 0x9812)},
- {} /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, dt9812_table);
-
struct usb_dt9812 {
struct slot_dt9812 *slot;
struct usb_device *udev;
return result;
}
-/*
- * USB framework functions
- */
-
-static int dt9812_probe(struct usb_interface *interface,
- const struct usb_device_id *id)
-{
- int retval = -ENOMEM;
- struct usb_dt9812 *dev = NULL;
- struct usb_host_interface *iface_desc;
- struct usb_endpoint_descriptor *endpoint;
- int i;
- u8 fw;
-
- /* allocate memory for our device state and initialize it */
- dev = kzalloc(sizeof(*dev), GFP_KERNEL);
- if (dev == NULL)
- goto error;
-
- kref_init(&dev->kref);
-
- dev->udev = usb_get_dev(interface_to_usbdev(interface));
- dev->interface = interface;
-
- /* Check endpoints */
- iface_desc = interface->cur_altsetting;
-
- if (iface_desc->desc.bNumEndpoints != 5) {
- dev_err(&interface->dev, "Wrong number of endpoints.\n");
- retval = -ENODEV;
- goto error;
- }
-
- for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
- int direction = -1;
- endpoint = &iface_desc->endpoint[i].desc;
- switch (i) {
- case 0:
- direction = USB_DIR_IN;
- dev->message_pipe.addr = endpoint->bEndpointAddress;
- dev->message_pipe.size =
- le16_to_cpu(endpoint->wMaxPacketSize);
-
- break;
- case 1:
- direction = USB_DIR_OUT;
- dev->command_write.addr = endpoint->bEndpointAddress;
- dev->command_write.size =
- le16_to_cpu(endpoint->wMaxPacketSize);
- break;
- case 2:
- direction = USB_DIR_IN;
- dev->command_read.addr = endpoint->bEndpointAddress;
- dev->command_read.size =
- le16_to_cpu(endpoint->wMaxPacketSize);
- break;
- case 3:
- direction = USB_DIR_OUT;
- dev->write_stream.addr = endpoint->bEndpointAddress;
- dev->write_stream.size =
- le16_to_cpu(endpoint->wMaxPacketSize);
- break;
- case 4:
- direction = USB_DIR_IN;
- dev->read_stream.addr = endpoint->bEndpointAddress;
- dev->read_stream.size =
- le16_to_cpu(endpoint->wMaxPacketSize);
- break;
- }
- if ((endpoint->bEndpointAddress & USB_DIR_IN) != direction) {
- dev_err(&interface->dev,
- "Endpoint has wrong direction.\n");
- retval = -ENODEV;
- goto error;
- }
- }
- if (dt9812_read_info(dev, 0, &fw, sizeof(fw)) != 0) {
- /*
- * Seems like a configuration reset is necessary if driver is
- * reloaded while device is attached
- */
- usb_reset_configuration(dev->udev);
- for (i = 0; i < 10; i++) {
- retval = dt9812_read_info(dev, 1, &fw, sizeof(fw));
- if (retval == 0) {
- dev_info(&interface->dev,
- "usb_reset_configuration succeeded "
- "after %d iterations\n", i);
- break;
- }
- }
- }
-
- if (dt9812_read_info(dev, 1, &dev->vendor, sizeof(dev->vendor)) != 0) {
- dev_err(&interface->dev, "Failed to read vendor.\n");
- retval = -ENODEV;
- goto error;
- }
- if (dt9812_read_info(dev, 3, &dev->product, sizeof(dev->product)) != 0) {
- dev_err(&interface->dev, "Failed to read product.\n");
- retval = -ENODEV;
- goto error;
- }
- if (dt9812_read_info(dev, 5, &dev->device, sizeof(dev->device)) != 0) {
- dev_err(&interface->dev, "Failed to read device.\n");
- retval = -ENODEV;
- goto error;
- }
- if (dt9812_read_info(dev, 7, &dev->serial, sizeof(dev->serial)) != 0) {
- dev_err(&interface->dev, "Failed to read serial.\n");
- retval = -ENODEV;
- goto error;
- }
-
- dev->vendor = le16_to_cpu(dev->vendor);
- dev->product = le16_to_cpu(dev->product);
- dev->device = le16_to_cpu(dev->device);
- dev->serial = le32_to_cpu(dev->serial);
- switch (dev->device) {
- case DT9812_DEVID_DT9812_10:
- dev->analog_out_shadow[0] = 0x0800;
- dev->analog_out_shadow[1] = 0x800;
- break;
- case DT9812_DEVID_DT9812_2PT5:
- dev->analog_out_shadow[0] = 0x0000;
- dev->analog_out_shadow[1] = 0x0000;
- break;
- }
- dev->digital_out_shadow = 0;
-
- /* save our data pointer in this interface device */
- usb_set_intfdata(interface, dev);
-
- /* let the user know what node this device is now attached to */
- dev_info(&interface->dev, "USB DT9812 (%4.4x.%4.4x.%4.4x) #0x%8.8x\n",
- dev->vendor, dev->product, dev->device, dev->serial);
-
- down(&dt9812_mutex);
- {
- /* Find a slot for the USB device */
- struct slot_dt9812 *first = NULL;
- struct slot_dt9812 *best = NULL;
-
- for (i = 0; i < DT9812_NUM_SLOTS; i++) {
- if (!first && !dt9812[i].usb && dt9812[i].serial == 0)
- first = &dt9812[i];
- if (!best && dt9812[i].serial == dev->serial)
- best = &dt9812[i];
- }
-
- if (!best)
- best = first;
-
- if (best) {
- down(&best->mutex);
- best->usb = dev;
- dev->slot = best;
- up(&best->mutex);
- }
- }
- up(&dt9812_mutex);
-
- return 0;
-
-error:
- if (dev)
- kref_put(&dev->kref, dt9812_delete);
- return retval;
-}
-
-static void dt9812_disconnect(struct usb_interface *interface)
-{
- struct usb_dt9812 *dev;
- int minor = interface->minor;
-
- down(&dt9812_mutex);
- dev = usb_get_intfdata(interface);
- if (dev->slot) {
- down(&dev->slot->mutex);
- dev->slot->usb = NULL;
- up(&dev->slot->mutex);
- dev->slot = NULL;
- }
- usb_set_intfdata(interface, NULL);
- up(&dt9812_mutex);
-
- /* queue final destruction */
- kref_put(&dev->kref, dt9812_delete);
-
- dev_info(&interface->dev, "USB Dt9812 #%d now disconnected\n", minor);
-}
-
-static struct usb_driver dt9812_usb_driver = {
- .name = "dt9812",
- .probe = dt9812_probe,
- .disconnect = dt9812_disconnect,
- .id_table = dt9812_table,
-};
-
/*
* Comedi functions
*/
.detach = dt9812_detach,
};
+static int dt9812_probe(struct usb_interface *interface,
+ const struct usb_device_id *id)
+{
+ int retval = -ENOMEM;
+ struct usb_dt9812 *dev = NULL;
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *endpoint;
+ int i;
+ u8 fw;
+
+ /* allocate memory for our device state and initialize it */
+ dev = kzalloc(sizeof(*dev), GFP_KERNEL);
+ if (dev == NULL)
+ goto error;
+
+ kref_init(&dev->kref);
+
+ dev->udev = usb_get_dev(interface_to_usbdev(interface));
+ dev->interface = interface;
+
+ /* Check endpoints */
+ iface_desc = interface->cur_altsetting;
+
+ if (iface_desc->desc.bNumEndpoints != 5) {
+ dev_err(&interface->dev, "Wrong number of endpoints.\n");
+ retval = -ENODEV;
+ goto error;
+ }
+
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ int direction = -1;
+ endpoint = &iface_desc->endpoint[i].desc;
+ switch (i) {
+ case 0:
+ direction = USB_DIR_IN;
+ dev->message_pipe.addr = endpoint->bEndpointAddress;
+ dev->message_pipe.size =
+ le16_to_cpu(endpoint->wMaxPacketSize);
+
+ break;
+ case 1:
+ direction = USB_DIR_OUT;
+ dev->command_write.addr = endpoint->bEndpointAddress;
+ dev->command_write.size =
+ le16_to_cpu(endpoint->wMaxPacketSize);
+ break;
+ case 2:
+ direction = USB_DIR_IN;
+ dev->command_read.addr = endpoint->bEndpointAddress;
+ dev->command_read.size =
+ le16_to_cpu(endpoint->wMaxPacketSize);
+ break;
+ case 3:
+ direction = USB_DIR_OUT;
+ dev->write_stream.addr = endpoint->bEndpointAddress;
+ dev->write_stream.size =
+ le16_to_cpu(endpoint->wMaxPacketSize);
+ break;
+ case 4:
+ direction = USB_DIR_IN;
+ dev->read_stream.addr = endpoint->bEndpointAddress;
+ dev->read_stream.size =
+ le16_to_cpu(endpoint->wMaxPacketSize);
+ break;
+ }
+ if ((endpoint->bEndpointAddress & USB_DIR_IN) != direction) {
+ dev_err(&interface->dev,
+ "Endpoint has wrong direction.\n");
+ retval = -ENODEV;
+ goto error;
+ }
+ }
+ if (dt9812_read_info(dev, 0, &fw, sizeof(fw)) != 0) {
+ /*
+ * Seems like a configuration reset is necessary if driver is
+ * reloaded while device is attached
+ */
+ usb_reset_configuration(dev->udev);
+ for (i = 0; i < 10; i++) {
+ retval = dt9812_read_info(dev, 1, &fw, sizeof(fw));
+ if (retval == 0) {
+ dev_info(&interface->dev,
+ "usb_reset_configuration succeeded "
+ "after %d iterations\n", i);
+ break;
+ }
+ }
+ }
+
+ if (dt9812_read_info(dev, 1, &dev->vendor, sizeof(dev->vendor)) != 0) {
+ dev_err(&interface->dev, "Failed to read vendor.\n");
+ retval = -ENODEV;
+ goto error;
+ }
+ if (dt9812_read_info(dev, 3, &dev->product, sizeof(dev->product)) != 0) {
+ dev_err(&interface->dev, "Failed to read product.\n");
+ retval = -ENODEV;
+ goto error;
+ }
+ if (dt9812_read_info(dev, 5, &dev->device, sizeof(dev->device)) != 0) {
+ dev_err(&interface->dev, "Failed to read device.\n");
+ retval = -ENODEV;
+ goto error;
+ }
+ if (dt9812_read_info(dev, 7, &dev->serial, sizeof(dev->serial)) != 0) {
+ dev_err(&interface->dev, "Failed to read serial.\n");
+ retval = -ENODEV;
+ goto error;
+ }
+
+ dev->vendor = le16_to_cpu(dev->vendor);
+ dev->product = le16_to_cpu(dev->product);
+ dev->device = le16_to_cpu(dev->device);
+ dev->serial = le32_to_cpu(dev->serial);
+ switch (dev->device) {
+ case DT9812_DEVID_DT9812_10:
+ dev->analog_out_shadow[0] = 0x0800;
+ dev->analog_out_shadow[1] = 0x800;
+ break;
+ case DT9812_DEVID_DT9812_2PT5:
+ dev->analog_out_shadow[0] = 0x0000;
+ dev->analog_out_shadow[1] = 0x0000;
+ break;
+ }
+ dev->digital_out_shadow = 0;
+
+ /* save our data pointer in this interface device */
+ usb_set_intfdata(interface, dev);
+
+ /* let the user know what node this device is now attached to */
+ dev_info(&interface->dev, "USB DT9812 (%4.4x.%4.4x.%4.4x) #0x%8.8x\n",
+ dev->vendor, dev->product, dev->device, dev->serial);
+
+ down(&dt9812_mutex);
+ {
+ /* Find a slot for the USB device */
+ struct slot_dt9812 *first = NULL;
+ struct slot_dt9812 *best = NULL;
+
+ for (i = 0; i < DT9812_NUM_SLOTS; i++) {
+ if (!first && !dt9812[i].usb && dt9812[i].serial == 0)
+ first = &dt9812[i];
+ if (!best && dt9812[i].serial == dev->serial)
+ best = &dt9812[i];
+ }
+
+ if (!best)
+ best = first;
+
+ if (best) {
+ down(&best->mutex);
+ best->usb = dev;
+ dev->slot = best;
+ up(&best->mutex);
+ }
+ }
+ up(&dt9812_mutex);
+
+ return 0;
+
+error:
+ if (dev)
+ kref_put(&dev->kref, dt9812_delete);
+ return retval;
+}
+
+static void dt9812_disconnect(struct usb_interface *interface)
+{
+ struct usb_dt9812 *dev;
+ int minor = interface->minor;
+
+ down(&dt9812_mutex);
+ dev = usb_get_intfdata(interface);
+ if (dev->slot) {
+ down(&dev->slot->mutex);
+ dev->slot->usb = NULL;
+ up(&dev->slot->mutex);
+ dev->slot = NULL;
+ }
+ usb_set_intfdata(interface, NULL);
+ up(&dt9812_mutex);
+
+ /* queue final destruction */
+ kref_put(&dev->kref, dt9812_delete);
+
+ dev_info(&interface->dev, "USB Dt9812 #%d now disconnected\n", minor);
+}
+
+static const struct usb_device_id dt9812_table[] = {
+ { USB_DEVICE(0x0867, 0x9812) },
+ { }
+};
+MODULE_DEVICE_TABLE(usb, dt9812_table);
+
+static struct usb_driver dt9812_usb_driver = {
+ .name = "dt9812",
+ .id_table = dt9812_table,
+ .probe = dt9812_probe,
+ .disconnect = dt9812_disconnect,
+};
+
static int __init usb_dt9812_init(void)
{
int i;
projects / ~emulex / infiniband.git / commitdiff