Staging: bcm: Fixed warning 'space required before the open parenthesis '(''.

This patch fixes warning 'space required before the open parenthesis '(''
found by checkpacth.pl in driver bcm.

Signed-off-by: Tülin İzer <tulinizer@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/bcm/InterfaceIdleMode.c b/drivers/staging/bcm/InterfaceIdleMode.c
index 9ddfc1de354f85bd8a10ac950c19378d7341b552..5347828660429917b1946f31391d52552a935fd4 100644 (file)
--- a/drivers/staging/bcm/InterfaceIdleMode.c
+++ b/drivers/staging/bcm/InterfaceIdleMode.c
@@ -50,27 +50,27 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
 
        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "SubType of Message :0x%X", ntohl(*puiBuffer));
 
-       if(ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) {
+       if (ntohl(*puiBuffer) == GO_TO_IDLE_MODE_PAYLOAD) {
                BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, " Got GO_TO_IDLE_MODE_PAYLOAD(210) Msg Subtype");
-               if(ntohl(*(puiBuffer+1)) == 0 ) {
+               if (ntohl(*(puiBuffer+1)) == 0 ) {
                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Got IDLE MODE WAKE UP Response From F/W");
 
                        status = wrmalt (Adapter, SW_ABORT_IDLEMODE_LOC, &uiRegRead, sizeof(uiRegRead));
-                       if(status) {
+                       if (status) {
                                BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg");
                                return status;
                        }
 
-                       if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
+                       if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
                                uiRegRead = 0x00000000 ;
                                status = wrmalt (Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegRead, sizeof(uiRegRead));
-                               if(status) {
+                               if (status) {
                                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode    Reg");
                                        return status;
                                }
                        }
                        /* Below Register should not br read in case of Manual and Protocol Idle mode */
-                       else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
+                       else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
                                /* clear on read Register */
                                bytes = rdmalt(Adapter, DEVICE_INT_OUT_EP_REG0, &uiRegRead, sizeof(uiRegRead));
                                if (bytes < 0) {
@@ -95,7 +95,7 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
                        wake_up(&Adapter->lowpower_mode_wait_queue);
 
                } else {
-                       if(TRUE == Adapter->IdleMode)
+                       if (TRUE == Adapter->IdleMode)
                        {
                                BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Device is already in Idle mode....");
                                return status ;
@@ -120,7 +120,7 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
                                uiRegRead |= (1<<17);
 
                                status = wrmalt (Adapter, HPM_CONFIG_MSW, &uiRegRead, sizeof(uiRegRead));
-                               if(status) {
+                               if (status) {
                                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "wrm failed while clearing Idle Mode Reg\n");
                                        return status;
                                }
@@ -128,7 +128,7 @@ int InterfaceIdleModeRespond(struct bcm_mini_adapter *Adapter, unsigned int *pui
                        }
                        SendIdleModeResponse(Adapter);
                }
-       } else if(ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) {
+       } else if (ntohl(*puiBuffer) == IDLE_MODE_SF_UPDATE_MSG) {
                BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "OverRiding Service Flow Params");
                OverrideServiceFlowParams(Adapter, puiBuffer);
        }
@@ -147,33 +147,33 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
        struct bcm_interface_adapter *psInterfaceAdapter = Adapter->pvInterfaceAdapter;
 
        /* Abort Bus suspend if its already suspended */
-       if((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) {
+       if ((TRUE == psInterfaceAdapter->bSuspended) && (TRUE == Adapter->bDoSuspend)) {
                status = usb_autopm_get_interface(psInterfaceAdapter->interface);
                BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Bus got wakeup..Aborting Idle mode... status:%d \n", status);
 
        }
 
-       if((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
+       if ((Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING)
                                                                        ||
           (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE)) {
                /* write the SW abort pattern. */
                BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing pattern<%d> to SW_ABORT_IDLEMODE_LOC\n", Pattern);
                status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(Pattern));
-               if(status) {
+               if (status) {
                                BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
                                return status;
                }
        }
 
-       if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
+       if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
                value = 0x80000000;
                status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &value, sizeof(value));
-               if(status)
+               if (status)
                {
                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Register failed");
                        return status;
                }
-       } else if(Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
+       } else if (Adapter->ulPowerSaveMode != DEVICE_POWERSAVE_MODE_AS_PROTOCOL_IDLE_MODE) {
                /*
                 * Get a Interrupt Out URB and send 8 Bytes Down
                 * To be Done in Thread Context.
@@ -186,7 +186,7 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
                        8,
                        &lenwritten,
                        5000);
-               if(status) {
+               if (status) {
                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Sending Abort pattern down fails with status:%d..\n", status);
                        return status;
                } else {
@@ -196,21 +196,21 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
                /* mdelay(25); */
 
                timeout = jiffies +  msecs_to_jiffies(50) ;
-               while( timeout > jiffies ) {
+               while ( timeout > jiffies ) {
                        itr++ ;
                        rdmalt(Adapter, CHIP_ID_REG, &chip_id, sizeof(UINT));
-                       if(0xbece3200 == (chip_id&~(0xF0)))
+                       if (0xbece3200 == (chip_id&~(0xF0)))
                                chip_id = chip_id&~(0xF0);
-                       if(chip_id == Adapter->chip_id)
+                       if (chip_id == Adapter->chip_id)
                                break;
                }
-               if(timeout < jiffies )
+               if (timeout < jiffies )
                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Not able to read chip-id even after 25 msec");
                else
                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Number of completed iteration to read chip-id :%lu", itr);
 
                status = wrmalt(Adapter, SW_ABORT_IDLEMODE_LOC, &Pattern, sizeof(status));
-               if(status) {
+               if (status) {
                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0, "WRM to Register SW_ABORT_IDLEMODE_LOC failed..");
                        return status;
                }
@@ -220,7 +220,7 @@ static int InterfaceAbortIdlemode(struct bcm_mini_adapter *Adapter, unsigned int
 int InterfaceIdleModeWakeup(struct bcm_mini_adapter *Adapter)
 {
        ULONG   Status = 0;
-       if(Adapter->bTriedToWakeUpFromlowPowerMode) {
+       if (Adapter->bTriedToWakeUpFromlowPowerMode) {
                BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Wake up already attempted.. ignoring\n");
        } else {
                BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, IDLE_MODE, DBG_LVL_ALL, "Writing Low Power Mode Abort pattern to the Device\n");
@@ -237,11 +237,11 @@ void InterfaceHandleShutdownModeWakeup(struct bcm_mini_adapter *Adapter)
        INT Status = 0;
        int bytes;
 
-       if(Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
+       if (Adapter->ulPowerSaveMode == DEVICE_POWERSAVE_MODE_AS_MANUAL_CLOCK_GATING) {
                /* clear idlemode interrupt. */
                uiRegVal = 0;
                Status = wrmalt(Adapter, DEBUG_INTERRUPT_GENERATOR_REGISTOR, &uiRegVal, sizeof(uiRegVal));
-               if(Status) {
+               if (Status) {
                        BCM_DEBUG_PRINT(Adapter, DBG_TYPE_PRINTK, 0, 0,"WRM to DEBUG_INTERRUPT_GENERATOR_REGISTOR Failed with err :%d", Status);
                        return;
                }