--- /dev/null
+/* DVB USB compliant linux driver for
+ *
+ * DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
+ * LME2510C + LG TDQY-P001F
+ * LME2510C + BS2F7HZ0194
+ * LME2510 + LG TDQY-P001F
+ * LME2510 + BS2F7HZ0194
+ *
+ * MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
+ * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
+ *
+ * MV001F (LME2510+LGTDQY-P001F)
+ * LG TDQY - P001F =(TDA8263 + TDA10086H)
+ *
+ * MVB0001F (LME2510C+LGTDQT-P001F)
+ *
+ * MV0194 (LME2510+SHARP:BS2F7HZ0194)
+ * SHARP:BS2F7HZ0194 = (STV0299+IX2410)
+ *
+ * MVB0194 (LME2510C+SHARP0194)
+ *
+ * LME2510C + M88RS2000
+ *
+ * For firmware see Documentation/dvb/lmedm04.txt
+ *
+ * I2C addresses:
+ * 0xd0 - STV0288 - Demodulator
+ * 0xc0 - Sharp IX2505V - Tuner
+ * --
+ * 0x1c - TDA10086 - Demodulator
+ * 0xc0 - TDA8263 - Tuner
+ * --
+ * 0xd0 - STV0299 - Demodulator
+ * 0xc0 - IX2410 - Tuner
+ *
+ *
+ * VID = 3344 PID LME2510=1122 LME2510C=1120
+ *
+ * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
+ * LME2510(C)(C) Leaguerme (Shenzhen) MicroElectronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License Version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * see Documentation/dvb/README.dvb-usb for more information
+ *
+ * Known Issues :
+ * LME2510: Non Intel USB chipsets fail to maintain High Speed on
+ * Boot or Hot Plug.
+ *
+ * QQbox suffers from noise on LNB voltage.
+ *
+ * LME2510: SHARP:BS2F7HZ0194(MV0194) cannot cold reset and share system
+ * with other tuners. After a cold reset streaming will not start.
+ *
+ * M88RS2000 suffers from loss of lock.
+ */
+#define DVB_USB_LOG_PREFIX "LME2510(C)"
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <media/rc-core.h>
+
+#include "dvb_usb.h"
+#include "lmedm04.h"
+#include "tda826x.h"
+#include "tda10086.h"
+#include "stv0288.h"
+#include "ix2505v.h"
+#include "stv0299.h"
+#include "dvb-pll.h"
+#include "z0194a.h"
+#include "m88rs2000.h"
+
+
+#define LME2510_C_S7395 "dvb-usb-lme2510c-s7395.fw";
+#define LME2510_C_LG "dvb-usb-lme2510c-lg.fw";
+#define LME2510_C_S0194 "dvb-usb-lme2510c-s0194.fw";
+#define LME2510_C_RS2000 "dvb-usb-lme2510c-rs2000.fw";
+#define LME2510_LG "dvb-usb-lme2510-lg.fw";
+#define LME2510_S0194 "dvb-usb-lme2510-s0194.fw";
+
+/* debug */
+static int dvb_usb_lme2510_debug;
+#define lme_debug(var, level, args...) do { \
+ if ((var >= level)) \
+ pr_debug(DVB_USB_LOG_PREFIX": " args); \
+} while (0)
+#define deb_info(level, args...) lme_debug(dvb_usb_lme2510_debug, level, args)
+#define debug_data_snipet(level, name, p) \
+ deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \
+ *p, *(p+1), *(p+2), *(p+3), *(p+4), \
+ *(p+5), *(p+6), *(p+7));
+#define info(args...) pr_info(DVB_USB_LOG_PREFIX": "args)
+
+module_param_named(debug, dvb_usb_lme2510_debug, int, 0644);
+MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
+
+static int dvb_usb_lme2510_firmware;
+module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644);
+MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG");
+
+static int pid_filter;
+module_param_named(pid, pid_filter, int, 0644);
+MODULE_PARM_DESC(pid, "set default 0=default 1=off 2=on");
+
+
+DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
+
+#define TUNER_DEFAULT 0x0
+#define TUNER_LG 0x1
+#define TUNER_S7395 0x2
+#define TUNER_S0194 0x3
+#define TUNER_RS2000 0x4
+
+struct lme2510_state {
+ u8 id;
+ u8 tuner_config;
+ u8 signal_lock;
+ u8 signal_level;
+ u8 signal_sn;
+ u8 time_key;
+ u8 last_key;
+ u8 key_timeout;
+ u8 i2c_talk_onoff;
+ u8 i2c_gate;
+ u8 i2c_tuner_gate_w;
+ u8 i2c_tuner_gate_r;
+ u8 i2c_tuner_addr;
+ u8 stream_on;
+ u8 pid_size;
+ u8 pid_off;
+ void *buffer;
+ struct urb *lme_urb;
+ void *usb_buffer;
+ int (*fe_set_voltage)(struct dvb_frontend *, fe_sec_voltage_t);
+ u8 dvb_usb_lme2510_firmware;
+};
+
+static int lme2510_bulk_write(struct usb_device *dev,
+ u8 *snd, int len, u8 pipe)
+{
+ int ret, actual_l;
+
+ ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
+ snd, len , &actual_l, 100);
+ return ret;
+}
+
+static int lme2510_bulk_read(struct usb_device *dev,
+ u8 *rev, int len, u8 pipe)
+{
+ int ret, actual_l;
+
+ ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
+ rev, len , &actual_l, 200);
+ return ret;
+}
+
+static int lme2510_usb_talk(struct dvb_usb_device *d,
+ u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+ struct lme2510_state *st = d->priv;
+ u8 *buff;
+ int ret = 0;
+
+ if (st->usb_buffer == NULL) {
+ st->usb_buffer = kmalloc(64, GFP_KERNEL);
+ if (st->usb_buffer == NULL) {
+ info("MEM Error no memory");
+ return -ENOMEM;
+ }
+ }
+ buff = st->usb_buffer;
+
+ ret = mutex_lock_interruptible(&d->usb_mutex);
+
+ if (ret < 0)
+ return -EAGAIN;
+
+ /* the read/write capped at 64 */
+ memcpy(buff, wbuf, (wlen < 64) ? wlen : 64);
+
+ ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01);
+
+ ret |= lme2510_bulk_read(d->udev, buff, (rlen < 64) ?
+ rlen : 64 , 0x01);
+
+ if (rlen > 0)
+ memcpy(rbuf, buff, rlen);
+
+ mutex_unlock(&d->usb_mutex);
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+static int lme2510_stream_restart(struct dvb_usb_device *d)
+{
+ struct lme2510_state *st = d->priv;
+ u8 all_pids[] = LME_ALL_PIDS;
+ u8 stream_on[] = LME_ST_ON_W;
+ int ret;
+ u8 rbuff[1];
+ if (st->pid_off)
+ ret = lme2510_usb_talk(d, all_pids, sizeof(all_pids),
+ rbuff, sizeof(rbuff));
+ /*Restart Stream Command*/
+ ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on),
+ rbuff, sizeof(rbuff));
+ return ret;
+}
+
+static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out)
+{
+ struct lme2510_state *st = d->priv;
+ static u8 pid_buff[] = LME_ZERO_PID;
+ static u8 rbuf[1];
+ u8 pid_no = index * 2;
+ u8 pid_len = pid_no + 2;
+ int ret = 0;
+ deb_info(1, "PID Setting Pid %04x", pid_out);
+
+ if (st->pid_size == 0)
+ ret |= lme2510_stream_restart(d);
+
+ pid_buff[2] = pid_no;
+ pid_buff[3] = (u8)pid_out & 0xff;
+ pid_buff[4] = pid_no + 1;
+ pid_buff[5] = (u8)(pid_out >> 8);
+
+ if (pid_len > st->pid_size)
+ st->pid_size = pid_len;
+ pid_buff[7] = 0x80 + st->pid_size;
+
+ ret |= lme2510_usb_talk(d, pid_buff ,
+ sizeof(pid_buff) , rbuf, sizeof(rbuf));
+
+ if (st->stream_on)
+ ret |= lme2510_stream_restart(d);
+
+ return ret;
+}
+
+static void lme2510_int_response(struct urb *lme_urb)
+{
+ struct dvb_usb_adapter *adap = lme_urb->context;
+ struct lme2510_state *st = adap_to_priv(adap);
+ static u8 *ibuf, *rbuf;
+ int i = 0, offset;
+ u32 key;
+
+ switch (lme_urb->status) {
+ case 0:
+ case -ETIMEDOUT:
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ return;
+ default:
+ info("Error %x", lme_urb->status);
+ break;
+ }
+
+ rbuf = (u8 *) lme_urb->transfer_buffer;
+
+ offset = ((lme_urb->actual_length/8) > 4)
+ ? 4 : (lme_urb->actual_length/8) ;
+
+ for (i = 0; i < offset; ++i) {
+ ibuf = (u8 *)&rbuf[i*8];
+ deb_info(5, "INT O/S C =%02x C/O=%02x Type =%02x%02x",
+ offset, i, ibuf[0], ibuf[1]);
+
+ switch (ibuf[0]) {
+ case 0xaa:
+ debug_data_snipet(1, "INT Remote data snipet", ibuf);
+ if ((ibuf[4] + ibuf[5]) == 0xff) {
+ key = ibuf[5];
+ key += (ibuf[3] > 0)
+ ? (ibuf[3] ^ 0xff) << 8 : 0;
+ key += (ibuf[2] ^ 0xff) << 16;
+ deb_info(1, "INT Key =%08x", key);
+ if (adap_to_d(adap)->rc_dev != NULL)
+ rc_keydown(adap_to_d(adap)->rc_dev,
+ key, 0);
+ }
+ break;
+ case 0xbb:
+ switch (st->tuner_config) {
+ case TUNER_LG:
+ if (ibuf[2] > 0)
+ st->signal_lock = ibuf[2];
+ st->signal_level = ibuf[4];
+ st->signal_sn = ibuf[3];
+ st->time_key = ibuf[7];
+ break;
+ case TUNER_S7395:
+ case TUNER_S0194:
+ /* Tweak for earlier firmware*/
+ if (ibuf[1] == 0x03) {
+ if (ibuf[2] > 1)
+ st->signal_lock = ibuf[2];
+ st->signal_level = ibuf[3];
+ st->signal_sn = ibuf[4];
+ } else {
+ st->signal_level = ibuf[4];
+ st->signal_sn = ibuf[5];
+ st->signal_lock =
+ (st->signal_lock & 0xf7) +
+ ((ibuf[2] & 0x01) << 0x03);
+ }
+ break;
+ case TUNER_RS2000:
+ if (ibuf[1] == 0x3 && ibuf[6] == 0xff)
+ st->signal_lock = 0xff;
+ else
+ st->signal_lock = 0x00;
+ st->signal_level = ibuf[5];
+ st->signal_sn = ibuf[4];
+ st->time_key = ibuf[7];
+ default:
+ break;
+ }
+ debug_data_snipet(5, "INT Remote data snipet in", ibuf);
+ break;
+ case 0xcc:
+ debug_data_snipet(1, "INT Control data snipet", ibuf);
+ break;
+ default:
+ debug_data_snipet(1, "INT Unknown data snipet", ibuf);
+ break;
+ }
+ }
+ usb_submit_urb(lme_urb, GFP_ATOMIC);
+}
+
+static int lme2510_int_read(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *lme_int = adap_to_priv(adap);
+
+ lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC);
+
+ if (lme_int->lme_urb == NULL)
+ return -ENOMEM;
+
+ lme_int->buffer = usb_alloc_coherent(d->udev, 128, GFP_ATOMIC,
+ &lme_int->lme_urb->transfer_dma);
+
+ if (lme_int->buffer == NULL)
+ return -ENOMEM;
+
+ usb_fill_int_urb(lme_int->lme_urb,
+ d->udev,
+ usb_rcvintpipe(d->udev, 0xa),
+ lme_int->buffer,
+ 128,
+ lme2510_int_response,
+ adap,
+ 8);
+
+ lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);
+ info("INT Interrupt Service Started");
+
+ return 0;
+}
+
+static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *st = adap_to_priv(adap);
+ static u8 clear_pid_reg[] = LME_ALL_PIDS;
+ static u8 rbuf[1];
+ int ret = 0;
+
+ deb_info(1, "PID Clearing Filter");
+
+ mutex_lock(&d->i2c_mutex);
+
+ if (!onoff) {
+ ret |= lme2510_usb_talk(d, clear_pid_reg,
+ sizeof(clear_pid_reg), rbuf, sizeof(rbuf));
+ st->pid_off = true;
+ } else
+ st->pid_off = false;
+
+ st->pid_size = 0;
+
+ mutex_unlock(&d->i2c_mutex);
+
+ return 0;
+}
+
+static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
+ int onoff)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ int ret = 0;
+
+ deb_info(3, "%s PID=%04x Index=%04x onoff=%02x", __func__,
+ pid, index, onoff);
+
+ if (onoff) {
+ mutex_lock(&d->i2c_mutex);
+ ret |= lme2510_enable_pid(d, index, pid);
+ mutex_unlock(&d->i2c_mutex);
+ }
+
+
+ return ret;
+}
+
+
+static int lme2510_return_status(struct dvb_usb_device *d)
+{
+ int ret = 0;
+ u8 *data;
+
+ data = kzalloc(10, GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ ret |= usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+ 0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200);
+ info("Firmware Status: %x (%x)", ret , data[2]);
+
+ ret = (ret < 0) ? -ENODEV : data[2];
+ kfree(data);
+ return ret;
+}
+
+static int lme2510_msg(struct dvb_usb_device *d,
+ u8 *wbuf, int wlen, u8 *rbuf, int rlen)
+{
+ int ret = 0;
+ struct lme2510_state *st = d->priv;
+
+ if (st->i2c_talk_onoff == 1) {
+
+ ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+
+ switch (st->tuner_config) {
+ case TUNER_LG:
+ if (wbuf[2] == 0x1c) {
+ if (wbuf[3] == 0x0e) {
+ st->signal_lock = rbuf[1];
+ if ((st->stream_on & 1) &&
+ (st->signal_lock & 0x10)) {
+ lme2510_stream_restart(d);
+ st->i2c_talk_onoff = 0;
+ }
+ msleep(80);
+ }
+ }
+ break;
+ case TUNER_S7395:
+ if (wbuf[2] == 0xd0) {
+ if (wbuf[3] == 0x24) {
+ st->signal_lock = rbuf[1];
+ if ((st->stream_on & 1) &&
+ (st->signal_lock & 0x8)) {
+ lme2510_stream_restart(d);
+ st->i2c_talk_onoff = 0;
+ }
+ }
+ }
+ break;
+ case TUNER_S0194:
+ if (wbuf[2] == 0xd0) {
+ if (wbuf[3] == 0x1b) {
+ st->signal_lock = rbuf[1];
+ if ((st->stream_on & 1) &&
+ (st->signal_lock & 0x8)) {
+ lme2510_stream_restart(d);
+ st->i2c_talk_onoff = 0;
+ }
+ }
+ }
+ break;
+ case TUNER_RS2000:
+ default:
+ break;
+ }
+ } else {
+ /* TODO rewrite this section */
+ switch (st->tuner_config) {
+ case TUNER_LG:
+ switch (wbuf[3]) {
+ case 0x0e:
+ rbuf[0] = 0x55;
+ rbuf[1] = st->signal_lock;
+ break;
+ case 0x43:
+ rbuf[0] = 0x55;
+ rbuf[1] = st->signal_level;
+ break;
+ case 0x1c:
+ rbuf[0] = 0x55;
+ rbuf[1] = st->signal_sn;
+ break;
+ case 0x15:
+ case 0x16:
+ case 0x17:
+ case 0x18:
+ rbuf[0] = 0x55;
+ rbuf[1] = 0x00;
+ break;
+ default:
+ lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+ st->i2c_talk_onoff = 1;
+ break;
+ }
+ break;
+ case TUNER_S7395:
+ switch (wbuf[3]) {
+ case 0x10:
+ rbuf[0] = 0x55;
+ rbuf[1] = (st->signal_level & 0x80)
+ ? 0 : (st->signal_level * 2);
+ break;
+ case 0x2d:
+ rbuf[0] = 0x55;
+ rbuf[1] = st->signal_sn;
+ break;
+ case 0x24:
+ rbuf[0] = 0x55;
+ rbuf[1] = st->signal_lock;
+ break;
+ case 0x2e:
+ case 0x26:
+ case 0x27:
+ rbuf[0] = 0x55;
+ rbuf[1] = 0x00;
+ break;
+ default:
+ lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+ st->i2c_talk_onoff = 1;
+ break;
+ }
+ break;
+ case TUNER_S0194:
+ switch (wbuf[3]) {
+ case 0x18:
+ rbuf[0] = 0x55;
+ rbuf[1] = (st->signal_level & 0x80)
+ ? 0 : (st->signal_level * 2);
+ break;
+ case 0x24:
+ rbuf[0] = 0x55;
+ rbuf[1] = st->signal_sn;
+ break;
+ case 0x1b:
+ rbuf[0] = 0x55;
+ rbuf[1] = st->signal_lock;
+ break;
+ case 0x19:
+ case 0x25:
+ case 0x1e:
+ case 0x1d:
+ rbuf[0] = 0x55;
+ rbuf[1] = 0x00;
+ break;
+ default:
+ lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+ st->i2c_talk_onoff = 1;
+ break;
+ }
+ break;
+ case TUNER_RS2000:
+ switch (wbuf[3]) {
+ case 0x8c:
+ rbuf[0] = 0x55;
+ rbuf[1] = 0xff;
+ if (st->last_key == st->time_key) {
+ st->key_timeout++;
+ if (st->key_timeout > 5)
+ rbuf[1] = 0;
+ } else
+ st->key_timeout = 0;
+ st->last_key = st->time_key;
+ break;
+ default:
+ lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
+ st->i2c_talk_onoff = 1;
+ break;
+ }
+ default:
+ break;
+ }
+
+ deb_info(4, "I2C From Interrupt Message out(%02x) in(%02x)",
+ wbuf[3], rbuf[1]);
+
+ }
+
+ return ret;
+}
+
+
+static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
+ int num)
+{
+ struct dvb_usb_device *d = i2c_get_adapdata(adap);
+ struct lme2510_state *st = d->priv;
+ static u8 obuf[64], ibuf[64];
+ int i, read, read_o;
+ u16 len;
+ u8 gate = st->i2c_gate;
+
+ mutex_lock(&d->i2c_mutex);
+
+ if (gate == 0)
+ gate = 5;
+
+ for (i = 0; i < num; i++) {
+ read_o = 1 & (msg[i].flags & I2C_M_RD);
+ read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
+ read |= read_o;
+ gate = (msg[i].addr == st->i2c_tuner_addr)
+ ? (read) ? st->i2c_tuner_gate_r
+ : st->i2c_tuner_gate_w
+ : st->i2c_gate;
+ obuf[0] = gate | (read << 7);
+
+ if (gate == 5)
+ obuf[1] = (read) ? 2 : msg[i].len + 1;
+ else
+ obuf[1] = msg[i].len + read + 1;
+
+ obuf[2] = msg[i].addr;
+ if (read) {
+ if (read_o)
+ len = 3;
+ else {
+ memcpy(&obuf[3], msg[i].buf, msg[i].len);
+ obuf[msg[i].len+3] = msg[i+1].len;
+ len = msg[i].len+4;
+ }
+ } else {
+ memcpy(&obuf[3], msg[i].buf, msg[i].len);
+ len = msg[i].len+3;
+ }
+
+ if (lme2510_msg(d, obuf, len, ibuf, 64) < 0) {
+ deb_info(1, "i2c transfer failed.");
+ mutex_unlock(&d->i2c_mutex);
+ return -EAGAIN;
+ }
+
+ if (read) {
+ if (read_o)
+ memcpy(msg[i].buf, &ibuf[1], msg[i].len);
+ else {
+ memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len);
+ i++;
+ }
+ }
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+ return i;
+}
+
+static u32 lme2510_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C;
+}
+
+static struct i2c_algorithm lme2510_i2c_algo = {
+ .master_xfer = lme2510_i2c_xfer,
+ .functionality = lme2510_i2c_func,
+};
+
+static int lme2510_streaming_ctrl(struct dvb_frontend *fe, int onoff)
+{
+ struct dvb_usb_adapter *adap = fe_to_adap(fe);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *st = adap_to_priv(adap);
+ static u8 clear_reg_3[] = LME_ALL_PIDS;
+ static u8 rbuf[1];
+ int ret = 0, rlen = sizeof(rbuf);
+
+ deb_info(1, "STM (%02x)", onoff);
+
+ /* Streaming is started by FE_HAS_LOCK */
+ if (onoff == 1)
+ st->stream_on = 1;
+ else {
+ deb_info(1, "STM Steam Off");
+ /* mutex is here only to avoid collision with I2C */
+ mutex_lock(&d->i2c_mutex);
+
+ ret = lme2510_usb_talk(d, clear_reg_3,
+ sizeof(clear_reg_3), rbuf, rlen);
+ st->stream_on = 0;
+ st->i2c_talk_onoff = 1;
+
+ mutex_unlock(&d->i2c_mutex);
+ }
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+static u8 check_sum(u8 *p, u8 len)
+{
+ u8 sum = 0;
+ while (len--)
+ sum += *p++;
+ return sum;
+}
+
+static int lme2510_download_firmware(struct dvb_usb_device *d,
+ const struct firmware *fw)
+{
+ int ret = 0;
+ u8 *data;
+ u16 j, wlen, len_in, start, end;
+ u8 packet_size, dlen, i;
+ u8 *fw_data;
+
+ packet_size = 0x31;
+ len_in = 1;
+
+ data = kzalloc(128, GFP_KERNEL);
+ if (!data) {
+ info("FRM Could not start Firmware Download"\
+ "(Buffer allocation failed)");
+ return -ENOMEM;
+ }
+
+ info("FRM Starting Firmware Download");
+
+ for (i = 1; i < 3; i++) {
+ start = (i == 1) ? 0 : 512;
+ end = (i == 1) ? 512 : fw->size;
+ for (j = start; j < end; j += (packet_size+1)) {
+ fw_data = (u8 *)(fw->data + j);
+ if ((end - j) > packet_size) {
+ data[0] = i;
+ dlen = packet_size;
+ } else {
+ data[0] = i | 0x80;
+ dlen = (u8)(end - j)-1;
+ }
+ data[1] = dlen;
+ memcpy(&data[2], fw_data, dlen+1);
+ wlen = (u8) dlen + 4;
+ data[wlen-1] = check_sum(fw_data, dlen+1);
+ deb_info(1, "Data S=%02x:E=%02x CS= %02x", data[3],
+ data[dlen+2], data[dlen+3]);
+ lme2510_usb_talk(d, data, wlen, data, len_in);
+ ret |= (data[0] == 0x88) ? 0 : -1;
+ }
+ }
+
+ usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
+ 0x06, 0x80, 0x0200, 0x00, data, 0x0109, 1000);
+
+
+ data[0] = 0x8a;
+ len_in = 1;
+ msleep(2000);
+ lme2510_usb_talk(d, data, len_in, data, len_in);
+ msleep(400);
+
+ if (ret < 0)
+ info("FRM Firmware Download Failed (%04x)" , ret);
+ else
+ info("FRM Firmware Download Completed - Resetting Device");
+
+ kfree(data);
+ return RECONNECTS_USB;
+}
+
+static void lme_coldreset(struct dvb_usb_device *d)
+{
+ u8 data[1] = {0};
+ data[0] = 0x0a;
+ info("FRM Firmware Cold Reset");
+
+ lme2510_usb_talk(d, data, sizeof(data), data, sizeof(data));
+
+ return;
+}
+
+static const char fw_c_s7395[] = LME2510_C_S7395;
+static const char fw_c_lg[] = LME2510_C_LG;
+static const char fw_c_s0194[] = LME2510_C_S0194;
+static const char fw_c_rs2000[] = LME2510_C_RS2000;
+static const char fw_lg[] = LME2510_LG;
+static const char fw_s0194[] = LME2510_S0194;
+
+const char *lme_firmware_switch(struct dvb_usb_device *d, int cold)
+{
+ struct lme2510_state *st = d->priv;
+ struct usb_device *udev = d->udev;
+ const struct firmware *fw = NULL;
+ const char *fw_lme;
+ int ret = 0;
+
+ cold = (cold > 0) ? (cold & 1) : 0;
+
+ switch (le16_to_cpu(udev->descriptor.idProduct)) {
+ case 0x1122:
+ switch (st->dvb_usb_lme2510_firmware) {
+ default:
+ st->dvb_usb_lme2510_firmware = TUNER_S0194;
+ case TUNER_S0194:
+ fw_lme = fw_s0194;
+ ret = request_firmware(&fw, fw_lme, &udev->dev);
+ if (ret == 0) {
+ cold = 0;
+ break;
+ }
+ st->dvb_usb_lme2510_firmware = TUNER_LG;
+ case TUNER_LG:
+ fw_lme = fw_lg;
+ ret = request_firmware(&fw, fw_lme, &udev->dev);
+ if (ret == 0)
+ break;
+ st->dvb_usb_lme2510_firmware = TUNER_DEFAULT;
+ break;
+ }
+ break;
+ case 0x1120:
+ switch (st->dvb_usb_lme2510_firmware) {
+ default:
+ st->dvb_usb_lme2510_firmware = TUNER_S7395;
+ case TUNER_S7395:
+ fw_lme = fw_c_s7395;
+ ret = request_firmware(&fw, fw_lme, &udev->dev);
+ if (ret == 0) {
+ cold = 0;
+ break;
+ }
+ st->dvb_usb_lme2510_firmware = TUNER_LG;
+ case TUNER_LG:
+ fw_lme = fw_c_lg;
+ ret = request_firmware(&fw, fw_lme, &udev->dev);
+ if (ret == 0)
+ break;
+ st->dvb_usb_lme2510_firmware = TUNER_S0194;
+ case TUNER_S0194:
+ fw_lme = fw_c_s0194;
+ ret = request_firmware(&fw, fw_lme, &udev->dev);
+ if (ret == 0)
+ break;
+ st->dvb_usb_lme2510_firmware = TUNER_DEFAULT;
+ cold = 0;
+ break;
+ }
+ break;
+ case 0x22f0:
+ fw_lme = fw_c_rs2000;
+ st->dvb_usb_lme2510_firmware = TUNER_RS2000;
+ break;
+ default:
+ fw_lme = fw_c_s7395;
+ }
+
+ release_firmware(fw);
+
+ if (cold) {
+ dvb_usb_lme2510_firmware = st->dvb_usb_lme2510_firmware;
+ info("FRM Changing to %s firmware", fw_lme);
+ lme_coldreset(d);
+ return NULL;
+ }
+
+ return fw_lme;
+}
+
+static int lme2510_kill_urb(struct usb_data_stream *stream)
+{
+ int i;
+
+ for (i = 0; i < stream->urbs_submitted; i++) {
+ deb_info(3, "killing URB no. %d.", i);
+ /* stop the URB */
+ usb_kill_urb(stream->urb_list[i]);
+ }
+ stream->urbs_submitted = 0;
+
+ return 0;
+}
+
+static struct tda10086_config tda10086_config = {
+ .demod_address = 0x1c,
+ .invert = 0,
+ .diseqc_tone = 1,
+ .xtal_freq = TDA10086_XTAL_16M,
+};
+
+static struct stv0288_config lme_config = {
+ .demod_address = 0xd0,
+ .min_delay_ms = 15,
+ .inittab = s7395_inittab,
+};
+
+static struct ix2505v_config lme_tuner = {
+ .tuner_address = 0xc0,
+ .min_delay_ms = 100,
+ .tuner_gain = 0x0,
+ .tuner_chargepump = 0x3,
+};
+
+static struct stv0299_config sharp_z0194_config = {
+ .demod_address = 0xd0,
+ .inittab = sharp_z0194a_inittab,
+ .mclk = 88000000UL,
+ .invert = 0,
+ .skip_reinit = 0,
+ .lock_output = STV0299_LOCKOUTPUT_1,
+ .volt13_op0_op1 = STV0299_VOLT13_OP1,
+ .min_delay_ms = 100,
+ .set_symbol_rate = sharp_z0194a_set_symbol_rate,
+};
+
+static int dm04_rs2000_set_ts_param(struct dvb_frontend *fe,
+ int caller)
+{
+ struct dvb_usb_adapter *adap = fe_to_adap(fe);
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *st = d->priv;
+
+ mutex_lock(&d->i2c_mutex);
+ if ((st->i2c_talk_onoff == 1) && (st->stream_on & 1)) {
+ st->i2c_talk_onoff = 0;
+ lme2510_stream_restart(d);
+ }
+ mutex_unlock(&d->i2c_mutex);
+
+ return 0;
+}
+
+static struct m88rs2000_config m88rs2000_config = {
+ .demod_addr = 0xd0,
+ .tuner_addr = 0xc0,
+ .set_ts_params = dm04_rs2000_set_ts_param,
+};
+
+static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
+ fe_sec_voltage_t voltage)
+{
+ struct dvb_usb_device *d = fe_to_d(fe);
+ struct lme2510_state *st = fe_to_priv(fe);
+ static u8 voltage_low[] = LME_VOLTAGE_L;
+ static u8 voltage_high[] = LME_VOLTAGE_H;
+ static u8 rbuf[1];
+ int ret = 0, len = 3, rlen = 1;
+
+ mutex_lock(&d->i2c_mutex);
+
+ switch (voltage) {
+ case SEC_VOLTAGE_18:
+ ret |= lme2510_usb_talk(d,
+ voltage_high, len, rbuf, rlen);
+ break;
+
+ case SEC_VOLTAGE_OFF:
+ case SEC_VOLTAGE_13:
+ default:
+ ret |= lme2510_usb_talk(d,
+ voltage_low, len, rbuf, rlen);
+ break;
+ }
+
+ mutex_unlock(&d->i2c_mutex);
+
+ if (st->tuner_config == TUNER_RS2000)
+ if (st->fe_set_voltage)
+ st->fe_set_voltage(fe, voltage);
+
+
+ return (ret < 0) ? -ENODEV : 0;
+}
+
+static int dm04_rs2000_read_signal_strength(struct dvb_frontend *fe,
+ u16 *strength)
+{
+ struct lme2510_state *st = fe_to_priv(fe);
+
+ *strength = (u16)((u32)st->signal_level * 0xffff / 0xff);
+
+ return 0;
+}
+
+static int dm04_rs2000_read_snr(struct dvb_frontend *fe, u16 *snr)
+{
+ struct lme2510_state *st = fe_to_priv(fe);
+
+ *snr = (u16)((u32)st->signal_sn * 0xffff / 0x7f);
+
+ return 0;
+}
+
+static int dm04_read_ber(struct dvb_frontend *fe, u32 *ber)
+{
+ *ber = 0;
+
+ return 0;
+}
+
+static int dm04_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
+{
+ *ucblocks = 0;
+
+ return 0;
+}
+
+static int lme_name(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *st = adap_to_priv(adap);
+ const char *desc = d->name;
+ char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395",
+ " SHARP:BS2F7HZ0194", " RS2000"};
+ char *name = adap->fe[0]->ops.info.name;
+
+ strlcpy(name, desc, 128);
+ strlcat(name, fe_name[st->tuner_config], 128);
+
+ return 0;
+}
+
+static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *st = d->priv;
+ int ret = 0;
+
+ st->i2c_talk_onoff = 1;
+ switch (le16_to_cpu(d->udev->descriptor.idProduct)) {
+ case 0x1122:
+ case 0x1120:
+ st->i2c_gate = 4;
+ adap->fe[0] = dvb_attach(tda10086_attach,
+ &tda10086_config, &d->i2c_adap);
+ if (adap->fe[0]) {
+ info("TUN Found Frontend TDA10086");
+ st->i2c_tuner_gate_w = 4;
+ st->i2c_tuner_gate_r = 4;
+ st->i2c_tuner_addr = 0xc0;
+ st->tuner_config = TUNER_LG;
+ if (st->dvb_usb_lme2510_firmware != TUNER_LG) {
+ st->dvb_usb_lme2510_firmware = TUNER_LG;
+ ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
+ }
+ break;
+ }
+
+ st->i2c_gate = 4;
+ adap->fe[0] = dvb_attach(stv0299_attach,
+ &sharp_z0194_config, &d->i2c_adap);
+ if (adap->fe[0]) {
+ info("FE Found Stv0299");
+ st->i2c_tuner_gate_w = 4;
+ st->i2c_tuner_gate_r = 5;
+ st->i2c_tuner_addr = 0xc0;
+ st->tuner_config = TUNER_S0194;
+ if (st->dvb_usb_lme2510_firmware != TUNER_S0194) {
+ st->dvb_usb_lme2510_firmware = TUNER_S0194;
+ ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
+ }
+ break;
+ }
+
+ st->i2c_gate = 5;
+ adap->fe[0] = dvb_attach(stv0288_attach, &lme_config,
+ &d->i2c_adap);
+
+ if (adap->fe[0]) {
+ info("FE Found Stv0288");
+ st->i2c_tuner_gate_w = 4;
+ st->i2c_tuner_gate_r = 5;
+ st->i2c_tuner_addr = 0xc0;
+ st->tuner_config = TUNER_S7395;
+ if (st->dvb_usb_lme2510_firmware != TUNER_S7395) {
+ st->dvb_usb_lme2510_firmware = TUNER_S7395;
+ ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
+ }
+ break;
+ }
+ case 0x22f0:
+ st->i2c_gate = 5;
+ adap->fe[0] = dvb_attach(m88rs2000_attach,
+ &m88rs2000_config, &d->i2c_adap);
+
+ if (adap->fe[0]) {
+ info("FE Found M88RS2000");
+ st->i2c_tuner_gate_w = 5;
+ st->i2c_tuner_gate_r = 5;
+ st->i2c_tuner_addr = 0xc0;
+ st->tuner_config = TUNER_RS2000;
+ st->fe_set_voltage =
+ adap->fe[0]->ops.set_voltage;
+
+ adap->fe[0]->ops.read_signal_strength =
+ dm04_rs2000_read_signal_strength;
+ adap->fe[0]->ops.read_snr =
+ dm04_rs2000_read_snr;
+ adap->fe[0]->ops.read_ber =
+ dm04_read_ber;
+ adap->fe[0]->ops.read_ucblocks =
+ dm04_read_ucblocks;
+ }
+ break;
+ }
+
+ if (adap->fe[0] == NULL) {
+ info("DM04/QQBOX Not Powered up or not Supported");
+ return -ENODEV;
+ }
+
+ if (ret) {
+ if (adap->fe[0]) {
+ dvb_frontend_detach(adap->fe[0]);
+ adap->fe[0] = NULL;
+ }
+ d->rc_map = NULL;
+ return -ENODEV;
+ }
+
+ adap->fe[0]->ops.set_voltage = dm04_lme2510_set_voltage;
+ ret = lme_name(adap);
+ return ret;
+}
+
+static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap_to_d(adap);
+ struct lme2510_state *st = adap_to_priv(adap);
+ char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA", "RS2000"};
+ int ret = 0;
+
+ switch (st->tuner_config) {
+ case TUNER_LG:
+ if (dvb_attach(tda826x_attach, adap->fe[0], 0xc0,
+ &d->i2c_adap, 1))
+ ret = st->tuner_config;
+ break;
+ case TUNER_S7395:
+ if (dvb_attach(ix2505v_attach , adap->fe[0], &lme_tuner,
+ &d->i2c_adap))
+ ret = st->tuner_config;
+ break;
+ case TUNER_S0194:
+ if (dvb_attach(dvb_pll_attach , adap->fe[0], 0xc0,
+ &d->i2c_adap, DVB_PLL_OPERA1))
+ ret = st->tuner_config;
+ break;
+ case TUNER_RS2000:
+ ret = st->tuner_config;
+ break;
+ default:
+ break;
+ }
+
+ if (ret)
+ info("TUN Found %s tuner", tun_msg[ret]);
+ else {
+ info("TUN No tuner found --- resetting device");
+ lme_coldreset(d);
+ return -ENODEV;
+ }
+
+ /* Start the Interrupt*/
+ ret = lme2510_int_read(adap);
+ if (ret < 0) {
+ info("INT Unable to start Interrupt Service");
+ return -ENODEV;
+ }
+
+ return ret;
+}
+
+static int lme2510_powerup(struct dvb_usb_device *d, int onoff)
+{
+ struct lme2510_state *st = d->priv;
+ static u8 lnb_on[] = LNB_ON;
+ static u8 lnb_off[] = LNB_OFF;
+ static u8 rbuf[1];
+ int ret = 0, len = 3, rlen = 1;
+
+ mutex_lock(&d->i2c_mutex);
+
+ if (onoff)
+ ret = lme2510_usb_talk(d, lnb_on, len, rbuf, rlen);
+ else
+ ret = lme2510_usb_talk(d, lnb_off, len, rbuf, rlen);
+
+ st->i2c_talk_onoff = 1;
+
+ mutex_unlock(&d->i2c_mutex);
+
+ return ret;
+}
+
+static int lme2510_get_adapter_count(struct dvb_usb_device *d)
+{
+ return 1;
+}
+
+static int lme2510_identify_state(struct dvb_usb_device *d, const char **name)
+{
+ struct lme2510_state *st = d->priv;
+
+ usb_reset_configuration(d->udev);
+
+ usb_set_interface(d->udev,
+ d->intf->cur_altsetting->desc.bInterfaceNumber, 1);
+
+ st->dvb_usb_lme2510_firmware = dvb_usb_lme2510_firmware;
+
+ if (lme2510_return_status(d) == 0x44) {
+ *name = lme_firmware_switch(d, 0);
+ return COLD;
+ }
+
+ return 0;
+}
+
+static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
+ struct usb_data_stream_properties *stream)
+{
+ struct dvb_usb_adapter *adap = fe_to_adap(fe);
+ struct dvb_usb_device *d = adap_to_d(adap);
+
+ if (adap == NULL)
+ return 0;
+ /* Turn PID filter on the fly by module option */
+ if (pid_filter == 2) {
+ adap->pid_filtering = 1;
+ adap->max_feed_count = 15;
+ }
+
+ if (!(le16_to_cpu(d->udev->descriptor.idProduct)
+ == 0x1122))
+ stream->endpoint = 0x8;
+
+ return 0;
+}
+
+static int lme2510_get_rc_config(struct dvb_usb_device *d,
+ struct dvb_usb_rc *rc)
+{
+ rc->allowed_protos = RC_TYPE_NEC;
+ return 0;
+}
+
+static void *lme2510_exit_int(struct dvb_usb_device *d)
+{
+ struct lme2510_state *st = d->priv;
+ struct dvb_usb_adapter *adap = &d->adapter[0];
+ void *buffer = NULL;
+
+ if (adap != NULL) {
+ lme2510_kill_urb(&adap->stream);
+ }
+
+ if (st->usb_buffer != NULL) {
+ st->i2c_talk_onoff = 1;
+ st->signal_lock = 0;
+ st->signal_level = 0;
+ st->signal_sn = 0;
+ buffer = st->usb_buffer;
+ }
+
+ if (st->lme_urb != NULL) {
+ usb_kill_urb(st->lme_urb);
+ usb_free_coherent(d->udev, 128, st->buffer,
+ st->lme_urb->transfer_dma);
+ info("Interrupt Service Stopped");
+ }
+
+ return buffer;
+}
+
+static void lme2510_exit(struct dvb_usb_device *d)
+{
+ void *usb_buffer;
+
+ if (d != NULL) {
+ usb_buffer = lme2510_exit_int(d);
+ if (usb_buffer != NULL)
+ kfree(usb_buffer);
+ }
+}
+
+static struct dvb_usb_device_properties lme2510_props = {
+ .driver_name = KBUILD_MODNAME,
+ .owner = THIS_MODULE,
+ .bInterfaceNumber = 0,
+ .adapter_nr = adapter_nr,
+ .size_of_priv = sizeof(struct lme2510_state),
+
+ .download_firmware = lme2510_download_firmware,
+
+ .power_ctrl = lme2510_powerup,
+ .identify_state = lme2510_identify_state,
+ .i2c_algo = &lme2510_i2c_algo,
+
+ .frontend_attach = dm04_lme2510_frontend_attach,
+ .tuner_attach = dm04_lme2510_tuner,
+ .get_stream_config = lme2510_get_stream_config,
+ .get_adapter_count = lme2510_get_adapter_count,
+ .streaming_ctrl = lme2510_streaming_ctrl,
+
+ .get_rc_config = lme2510_get_rc_config,
+
+ .exit = lme2510_exit,
+ .adapter = {
+ {
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER|
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 15,
+ .pid_filter = lme2510_pid_filter,
+ .pid_filter_ctrl = lme2510_pid_filter_ctrl,
+ .stream =
+ DVB_USB_STREAM_BULK(0x86, 10, 4096),
+ },
+ {
+ }
+ },
+};
+
+static const struct usb_device_id lme2510_id_table[] = {
+ { DVB_USB_DEVICE(0x3344, 0x1122, &lme2510_props,
+ "DM04_LME2510_DVB-S", RC_MAP_LME2510) },
+ { DVB_USB_DEVICE(0x3344, 0x1120, &lme2510_props,
+ "DM04_LME2510C_DVB-S", RC_MAP_LME2510) },
+ { DVB_USB_DEVICE(0x3344, 0x22f0, &lme2510_props,
+ "DM04_LME2510C_DVB-S RS2000", RC_MAP_LME2510) },
+ {} /* Terminating entry */
+};
+
+MODULE_DEVICE_TABLE(usb, lme2510_id_table);
+
+static struct usb_driver lme2510_driver = {
+ .name = KBUILD_MODNAME,
+ .probe = dvb_usbv2_probe,
+ .disconnect = dvb_usbv2_disconnect,
+ .id_table = lme2510_id_table,
+ .no_dynamic_id = 1,
+ .soft_unbind = 1,
+};
+
+module_usb_driver(lme2510_driver);
+
+MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
+MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
+MODULE_VERSION("2.06");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE(LME2510_C_S7395);
+MODULE_FIRMWARE(LME2510_C_LG);
+MODULE_FIRMWARE(LME2510_C_S0194);
+MODULE_FIRMWARE(LME2510_C_RS2000);
+MODULE_FIRMWARE(LME2510_LG);
+MODULE_FIRMWARE(LME2510_S0194);
+
--- /dev/null
+/* DVB USB compliant linux driver for
+ *
+ * DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
+ * LME2510C + LG TDQY-P001F
+ * LME2510 + LG TDQY-P001F
+ *
+ * MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
+ * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
+ *
+ * MVB001F (LME2510+LGTDQT-P001F)
+ * LG TDQY - P001F =(TDA8263 + TDA10086H)
+ *
+ * MVB0001F (LME2510C+LGTDQT-P001F)
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation, version 2.
+ * *
+ * see Documentation/dvb/README.dvb-usb for more information
+ */
+#ifndef _DVB_USB_LME2510_H_
+#define _DVB_USB_LME2510_H_
+
+/* Streamer & PID
+ *
+ * Note: These commands do not actually stop the streaming
+ * but form some kind of packet filtering/stream count
+ * or tuning related functions.
+ * 06 XX
+ * offset 1 = 00 Enable Streaming
+ *
+ *
+ * PID
+ * 03 XX XX ----> reg number ---> setting....20 XX
+ * offset 1 = length
+ * offset 2 = start of data
+ * end byte -1 = 20
+ * end byte = clear pid always a0, other wise 9c, 9a ??
+ *
+*/
+#define LME_ST_ON_W {0x06, 0x00}
+#define LME_CLEAR_PID {0x03, 0x02, 0x20, 0xa0}
+#define LME_ZERO_PID {0x03, 0x06, 0x00, 0x00, 0x01, 0x00, 0x20, 0x9c}
+#define LME_ALL_PIDS {0x03, 0x06, 0x00, 0xff, 0x01, 0x1f, 0x20, 0x81}
+
+/* LNB Voltage
+ * 07 XX XX
+ * offset 1 = 01
+ * offset 2 = 00=Voltage low 01=Voltage high
+ *
+ * LNB Power
+ * 03 01 XX
+ * offset 2 = 00=ON 01=OFF
+ */
+
+#define LME_VOLTAGE_L {0x07, 0x01, 0x00}
+#define LME_VOLTAGE_H {0x07, 0x01, 0x01}
+#define LNB_ON {0x3a, 0x01, 0x00}
+#define LNB_OFF {0x3a, 0x01, 0x01}
+
+/* Initial stv0288 settings for 7395 Frontend */
+static u8 s7395_inittab[] = {
+ 0x01, 0x15,
+ 0x02, 0x20,
+ 0x03, 0xa0,
+ 0x04, 0xa0,
+ 0x05, 0x12,
+ 0x06, 0x00,
+ 0x09, 0x00,
+ 0x0a, 0x04,
+ 0x0b, 0x00,
+ 0x0c, 0x00,
+ 0x0d, 0x00,
+ 0x0e, 0xc1,
+ 0x0f, 0x54,
+ 0x11, 0x7a,
+ 0x12, 0x03,
+ 0x13, 0x48,
+ 0x14, 0x84,
+ 0x15, 0xc5,
+ 0x16, 0xb8,
+ 0x17, 0x9c,
+ 0x18, 0x00,
+ 0x19, 0xa6,
+ 0x1a, 0x88,
+ 0x1b, 0x8f,
+ 0x1c, 0xf0,
+ 0x20, 0x0b,
+ 0x21, 0x54,
+ 0x22, 0xff,
+ 0x23, 0x01,
+ 0x28, 0x46,
+ 0x29, 0x66,
+ 0x2a, 0x90,
+ 0x2b, 0xfa,
+ 0x2c, 0xd9,
+ 0x30, 0x0,
+ 0x31, 0x1e,
+ 0x32, 0x14,
+ 0x33, 0x0f,
+ 0x34, 0x09,
+ 0x35, 0x0c,
+ 0x36, 0x05,
+ 0x37, 0x2f,
+ 0x38, 0x16,
+ 0x39, 0xbd,
+ 0x3a, 0x0,
+ 0x3b, 0x13,
+ 0x3c, 0x11,
+ 0x3d, 0x30,
+ 0x40, 0x63,
+ 0x41, 0x04,
+ 0x42, 0x20,
+ 0x43, 0x00,
+ 0x44, 0x00,
+ 0x45, 0x00,
+ 0x46, 0x00,
+ 0x47, 0x00,
+ 0x4a, 0x00,
+ 0x50, 0x10,
+ 0x51, 0x36,
+ 0x52, 0x21,
+ 0x53, 0x94,
+ 0x54, 0xb2,
+ 0x55, 0x29,
+ 0x56, 0x64,
+ 0x57, 0x2b,
+ 0x58, 0x54,
+ 0x59, 0x86,
+ 0x5a, 0x00,
+ 0x5b, 0x9b,
+ 0x5c, 0x08,
+ 0x5d, 0x7f,
+ 0x5e, 0xff,
+ 0x5f, 0x8d,
+ 0x70, 0x0,
+ 0x71, 0x0,
+ 0x72, 0x0,
+ 0x74, 0x0,
+ 0x75, 0x0,
+ 0x76, 0x0,
+ 0x81, 0x0,
+ 0x82, 0x3f,
+ 0x83, 0x3f,
+ 0x84, 0x0,
+ 0x85, 0x0,
+ 0x88, 0x0,
+ 0x89, 0x0,
+ 0x8a, 0x0,
+ 0x8b, 0x0,
+ 0x8c, 0x0,
+ 0x90, 0x0,
+ 0x91, 0x0,
+ 0x92, 0x0,
+ 0x93, 0x0,
+ 0x94, 0x1c,
+ 0x97, 0x0,
+ 0xa0, 0x48,
+ 0xa1, 0x0,
+ 0xb0, 0xb8,
+ 0xb1, 0x3a,
+ 0xb2, 0x10,
+ 0xb3, 0x82,
+ 0xb4, 0x80,
+ 0xb5, 0x82,
+ 0xb6, 0x82,
+ 0xb7, 0x82,
+ 0xb8, 0x20,
+ 0xb9, 0x0,
+ 0xf0, 0x0,
+ 0xf1, 0x0,
+ 0xf2, 0xc0,
+ 0xff, 0xff,
+};
+#endif
+++ /dev/null
-/* DVB USB compliant linux driver for
- *
- * DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
- * LME2510C + LG TDQY-P001F
- * LME2510C + BS2F7HZ0194
- * LME2510 + LG TDQY-P001F
- * LME2510 + BS2F7HZ0194
- *
- * MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
- * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
- *
- * MV001F (LME2510+LGTDQY-P001F)
- * LG TDQY - P001F =(TDA8263 + TDA10086H)
- *
- * MVB0001F (LME2510C+LGTDQT-P001F)
- *
- * MV0194 (LME2510+SHARP:BS2F7HZ0194)
- * SHARP:BS2F7HZ0194 = (STV0299+IX2410)
- *
- * MVB0194 (LME2510C+SHARP0194)
- *
- * LME2510C + M88RS2000
- *
- * For firmware see Documentation/dvb/lmedm04.txt
- *
- * I2C addresses:
- * 0xd0 - STV0288 - Demodulator
- * 0xc0 - Sharp IX2505V - Tuner
- * --
- * 0x1c - TDA10086 - Demodulator
- * 0xc0 - TDA8263 - Tuner
- * --
- * 0xd0 - STV0299 - Demodulator
- * 0xc0 - IX2410 - Tuner
- *
- *
- * VID = 3344 PID LME2510=1122 LME2510C=1120
- *
- * Copyright (C) 2010 Malcolm Priestley (tvboxspy@gmail.com)
- * LME2510(C)(C) Leaguerme (Shenzhen) MicroElectronics Co., Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License Version 2, as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- * see Documentation/dvb/README.dvb-usb for more information
- *
- * Known Issues :
- * LME2510: Non Intel USB chipsets fail to maintain High Speed on
- * Boot or Hot Plug.
- *
- * QQbox suffers from noise on LNB voltage.
- *
- * LME2510: SHARP:BS2F7HZ0194(MV0194) cannot cold reset and share system
- * with other tuners. After a cold reset streaming will not start.
- *
- * M88RS2000 suffers from loss of lock.
- */
-#define DVB_USB_LOG_PREFIX "LME2510(C)"
-#include <linux/usb.h>
-#include <linux/usb/input.h>
-#include <media/rc-core.h>
-
-#include "dvb_usb.h"
-#include "lmedm04.h"
-#include "tda826x.h"
-#include "tda10086.h"
-#include "stv0288.h"
-#include "ix2505v.h"
-#include "stv0299.h"
-#include "dvb-pll.h"
-#include "z0194a.h"
-#include "m88rs2000.h"
-
-
-#define LME2510_C_S7395 "dvb-usb-lme2510c-s7395.fw";
-#define LME2510_C_LG "dvb-usb-lme2510c-lg.fw";
-#define LME2510_C_S0194 "dvb-usb-lme2510c-s0194.fw";
-#define LME2510_C_RS2000 "dvb-usb-lme2510c-rs2000.fw";
-#define LME2510_LG "dvb-usb-lme2510-lg.fw";
-#define LME2510_S0194 "dvb-usb-lme2510-s0194.fw";
-
-/* debug */
-static int dvb_usb_lme2510_debug;
-#define lme_debug(var, level, args...) do { \
- if ((var >= level)) \
- pr_debug(DVB_USB_LOG_PREFIX": " args); \
-} while (0)
-#define deb_info(level, args...) lme_debug(dvb_usb_lme2510_debug, level, args)
-#define debug_data_snipet(level, name, p) \
- deb_info(level, name" (%02x%02x%02x%02x%02x%02x%02x%02x)", \
- *p, *(p+1), *(p+2), *(p+3), *(p+4), \
- *(p+5), *(p+6), *(p+7));
-#define info(args...) pr_info(DVB_USB_LOG_PREFIX": "args)
-
-module_param_named(debug, dvb_usb_lme2510_debug, int, 0644);
-MODULE_PARM_DESC(debug, "set debugging level (1=info (or-able)).");
-
-static int dvb_usb_lme2510_firmware;
-module_param_named(firmware, dvb_usb_lme2510_firmware, int, 0644);
-MODULE_PARM_DESC(firmware, "set default firmware 0=Sharp7395 1=LG");
-
-static int pid_filter;
-module_param_named(pid, pid_filter, int, 0644);
-MODULE_PARM_DESC(pid, "set default 0=default 1=off 2=on");
-
-
-DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
-
-#define TUNER_DEFAULT 0x0
-#define TUNER_LG 0x1
-#define TUNER_S7395 0x2
-#define TUNER_S0194 0x3
-#define TUNER_RS2000 0x4
-
-struct lme2510_state {
- u8 id;
- u8 tuner_config;
- u8 signal_lock;
- u8 signal_level;
- u8 signal_sn;
- u8 time_key;
- u8 last_key;
- u8 key_timeout;
- u8 i2c_talk_onoff;
- u8 i2c_gate;
- u8 i2c_tuner_gate_w;
- u8 i2c_tuner_gate_r;
- u8 i2c_tuner_addr;
- u8 stream_on;
- u8 pid_size;
- u8 pid_off;
- void *buffer;
- struct urb *lme_urb;
- void *usb_buffer;
- int (*fe_set_voltage)(struct dvb_frontend *, fe_sec_voltage_t);
- u8 dvb_usb_lme2510_firmware;
-};
-
-static int lme2510_bulk_write(struct usb_device *dev,
- u8 *snd, int len, u8 pipe)
-{
- int ret, actual_l;
-
- ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, pipe),
- snd, len , &actual_l, 100);
- return ret;
-}
-
-static int lme2510_bulk_read(struct usb_device *dev,
- u8 *rev, int len, u8 pipe)
-{
- int ret, actual_l;
-
- ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, pipe),
- rev, len , &actual_l, 200);
- return ret;
-}
-
-static int lme2510_usb_talk(struct dvb_usb_device *d,
- u8 *wbuf, int wlen, u8 *rbuf, int rlen)
-{
- struct lme2510_state *st = d->priv;
- u8 *buff;
- int ret = 0;
-
- if (st->usb_buffer == NULL) {
- st->usb_buffer = kmalloc(64, GFP_KERNEL);
- if (st->usb_buffer == NULL) {
- info("MEM Error no memory");
- return -ENOMEM;
- }
- }
- buff = st->usb_buffer;
-
- ret = mutex_lock_interruptible(&d->usb_mutex);
-
- if (ret < 0)
- return -EAGAIN;
-
- /* the read/write capped at 64 */
- memcpy(buff, wbuf, (wlen < 64) ? wlen : 64);
-
- ret |= lme2510_bulk_write(d->udev, buff, wlen , 0x01);
-
- ret |= lme2510_bulk_read(d->udev, buff, (rlen < 64) ?
- rlen : 64 , 0x01);
-
- if (rlen > 0)
- memcpy(rbuf, buff, rlen);
-
- mutex_unlock(&d->usb_mutex);
-
- return (ret < 0) ? -ENODEV : 0;
-}
-
-static int lme2510_stream_restart(struct dvb_usb_device *d)
-{
- struct lme2510_state *st = d->priv;
- u8 all_pids[] = LME_ALL_PIDS;
- u8 stream_on[] = LME_ST_ON_W;
- int ret;
- u8 rbuff[1];
- if (st->pid_off)
- ret = lme2510_usb_talk(d, all_pids, sizeof(all_pids),
- rbuff, sizeof(rbuff));
- /*Restart Stream Command*/
- ret = lme2510_usb_talk(d, stream_on, sizeof(stream_on),
- rbuff, sizeof(rbuff));
- return ret;
-}
-
-static int lme2510_enable_pid(struct dvb_usb_device *d, u8 index, u16 pid_out)
-{
- struct lme2510_state *st = d->priv;
- static u8 pid_buff[] = LME_ZERO_PID;
- static u8 rbuf[1];
- u8 pid_no = index * 2;
- u8 pid_len = pid_no + 2;
- int ret = 0;
- deb_info(1, "PID Setting Pid %04x", pid_out);
-
- if (st->pid_size == 0)
- ret |= lme2510_stream_restart(d);
-
- pid_buff[2] = pid_no;
- pid_buff[3] = (u8)pid_out & 0xff;
- pid_buff[4] = pid_no + 1;
- pid_buff[5] = (u8)(pid_out >> 8);
-
- if (pid_len > st->pid_size)
- st->pid_size = pid_len;
- pid_buff[7] = 0x80 + st->pid_size;
-
- ret |= lme2510_usb_talk(d, pid_buff ,
- sizeof(pid_buff) , rbuf, sizeof(rbuf));
-
- if (st->stream_on)
- ret |= lme2510_stream_restart(d);
-
- return ret;
-}
-
-static void lme2510_int_response(struct urb *lme_urb)
-{
- struct dvb_usb_adapter *adap = lme_urb->context;
- struct lme2510_state *st = adap_to_priv(adap);
- static u8 *ibuf, *rbuf;
- int i = 0, offset;
- u32 key;
-
- switch (lme_urb->status) {
- case 0:
- case -ETIMEDOUT:
- break;
- case -ECONNRESET:
- case -ENOENT:
- case -ESHUTDOWN:
- return;
- default:
- info("Error %x", lme_urb->status);
- break;
- }
-
- rbuf = (u8 *) lme_urb->transfer_buffer;
-
- offset = ((lme_urb->actual_length/8) > 4)
- ? 4 : (lme_urb->actual_length/8) ;
-
- for (i = 0; i < offset; ++i) {
- ibuf = (u8 *)&rbuf[i*8];
- deb_info(5, "INT O/S C =%02x C/O=%02x Type =%02x%02x",
- offset, i, ibuf[0], ibuf[1]);
-
- switch (ibuf[0]) {
- case 0xaa:
- debug_data_snipet(1, "INT Remote data snipet", ibuf);
- if ((ibuf[4] + ibuf[5]) == 0xff) {
- key = ibuf[5];
- key += (ibuf[3] > 0)
- ? (ibuf[3] ^ 0xff) << 8 : 0;
- key += (ibuf[2] ^ 0xff) << 16;
- deb_info(1, "INT Key =%08x", key);
- if (adap_to_d(adap)->rc_dev != NULL)
- rc_keydown(adap_to_d(adap)->rc_dev,
- key, 0);
- }
- break;
- case 0xbb:
- switch (st->tuner_config) {
- case TUNER_LG:
- if (ibuf[2] > 0)
- st->signal_lock = ibuf[2];
- st->signal_level = ibuf[4];
- st->signal_sn = ibuf[3];
- st->time_key = ibuf[7];
- break;
- case TUNER_S7395:
- case TUNER_S0194:
- /* Tweak for earlier firmware*/
- if (ibuf[1] == 0x03) {
- if (ibuf[2] > 1)
- st->signal_lock = ibuf[2];
- st->signal_level = ibuf[3];
- st->signal_sn = ibuf[4];
- } else {
- st->signal_level = ibuf[4];
- st->signal_sn = ibuf[5];
- st->signal_lock =
- (st->signal_lock & 0xf7) +
- ((ibuf[2] & 0x01) << 0x03);
- }
- break;
- case TUNER_RS2000:
- if (ibuf[1] == 0x3 && ibuf[6] == 0xff)
- st->signal_lock = 0xff;
- else
- st->signal_lock = 0x00;
- st->signal_level = ibuf[5];
- st->signal_sn = ibuf[4];
- st->time_key = ibuf[7];
- default:
- break;
- }
- debug_data_snipet(5, "INT Remote data snipet in", ibuf);
- break;
- case 0xcc:
- debug_data_snipet(1, "INT Control data snipet", ibuf);
- break;
- default:
- debug_data_snipet(1, "INT Unknown data snipet", ibuf);
- break;
- }
- }
- usb_submit_urb(lme_urb, GFP_ATOMIC);
-}
-
-static int lme2510_int_read(struct dvb_usb_adapter *adap)
-{
- struct dvb_usb_device *d = adap_to_d(adap);
- struct lme2510_state *lme_int = adap_to_priv(adap);
-
- lme_int->lme_urb = usb_alloc_urb(0, GFP_ATOMIC);
-
- if (lme_int->lme_urb == NULL)
- return -ENOMEM;
-
- lme_int->buffer = usb_alloc_coherent(d->udev, 128, GFP_ATOMIC,
- &lme_int->lme_urb->transfer_dma);
-
- if (lme_int->buffer == NULL)
- return -ENOMEM;
-
- usb_fill_int_urb(lme_int->lme_urb,
- d->udev,
- usb_rcvintpipe(d->udev, 0xa),
- lme_int->buffer,
- 128,
- lme2510_int_response,
- adap,
- 8);
-
- lme_int->lme_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
-
- usb_submit_urb(lme_int->lme_urb, GFP_ATOMIC);
- info("INT Interrupt Service Started");
-
- return 0;
-}
-
-static int lme2510_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
-{
- struct dvb_usb_device *d = adap_to_d(adap);
- struct lme2510_state *st = adap_to_priv(adap);
- static u8 clear_pid_reg[] = LME_ALL_PIDS;
- static u8 rbuf[1];
- int ret = 0;
-
- deb_info(1, "PID Clearing Filter");
-
- mutex_lock(&d->i2c_mutex);
-
- if (!onoff) {
- ret |= lme2510_usb_talk(d, clear_pid_reg,
- sizeof(clear_pid_reg), rbuf, sizeof(rbuf));
- st->pid_off = true;
- } else
- st->pid_off = false;
-
- st->pid_size = 0;
-
- mutex_unlock(&d->i2c_mutex);
-
- return 0;
-}
-
-static int lme2510_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid,
- int onoff)
-{
- struct dvb_usb_device *d = adap_to_d(adap);
- int ret = 0;
-
- deb_info(3, "%s PID=%04x Index=%04x onoff=%02x", __func__,
- pid, index, onoff);
-
- if (onoff) {
- mutex_lock(&d->i2c_mutex);
- ret |= lme2510_enable_pid(d, index, pid);
- mutex_unlock(&d->i2c_mutex);
- }
-
-
- return ret;
-}
-
-
-static int lme2510_return_status(struct dvb_usb_device *d)
-{
- int ret = 0;
- u8 *data;
-
- data = kzalloc(10, GFP_KERNEL);
- if (!data)
- return -ENOMEM;
-
- ret |= usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
- 0x06, 0x80, 0x0302, 0x00, data, 0x0006, 200);
- info("Firmware Status: %x (%x)", ret , data[2]);
-
- ret = (ret < 0) ? -ENODEV : data[2];
- kfree(data);
- return ret;
-}
-
-static int lme2510_msg(struct dvb_usb_device *d,
- u8 *wbuf, int wlen, u8 *rbuf, int rlen)
-{
- int ret = 0;
- struct lme2510_state *st = d->priv;
-
- if (st->i2c_talk_onoff == 1) {
-
- ret = lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
-
- switch (st->tuner_config) {
- case TUNER_LG:
- if (wbuf[2] == 0x1c) {
- if (wbuf[3] == 0x0e) {
- st->signal_lock = rbuf[1];
- if ((st->stream_on & 1) &&
- (st->signal_lock & 0x10)) {
- lme2510_stream_restart(d);
- st->i2c_talk_onoff = 0;
- }
- msleep(80);
- }
- }
- break;
- case TUNER_S7395:
- if (wbuf[2] == 0xd0) {
- if (wbuf[3] == 0x24) {
- st->signal_lock = rbuf[1];
- if ((st->stream_on & 1) &&
- (st->signal_lock & 0x8)) {
- lme2510_stream_restart(d);
- st->i2c_talk_onoff = 0;
- }
- }
- }
- break;
- case TUNER_S0194:
- if (wbuf[2] == 0xd0) {
- if (wbuf[3] == 0x1b) {
- st->signal_lock = rbuf[1];
- if ((st->stream_on & 1) &&
- (st->signal_lock & 0x8)) {
- lme2510_stream_restart(d);
- st->i2c_talk_onoff = 0;
- }
- }
- }
- break;
- case TUNER_RS2000:
- default:
- break;
- }
- } else {
- /* TODO rewrite this section */
- switch (st->tuner_config) {
- case TUNER_LG:
- switch (wbuf[3]) {
- case 0x0e:
- rbuf[0] = 0x55;
- rbuf[1] = st->signal_lock;
- break;
- case 0x43:
- rbuf[0] = 0x55;
- rbuf[1] = st->signal_level;
- break;
- case 0x1c:
- rbuf[0] = 0x55;
- rbuf[1] = st->signal_sn;
- break;
- case 0x15:
- case 0x16:
- case 0x17:
- case 0x18:
- rbuf[0] = 0x55;
- rbuf[1] = 0x00;
- break;
- default:
- lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
- st->i2c_talk_onoff = 1;
- break;
- }
- break;
- case TUNER_S7395:
- switch (wbuf[3]) {
- case 0x10:
- rbuf[0] = 0x55;
- rbuf[1] = (st->signal_level & 0x80)
- ? 0 : (st->signal_level * 2);
- break;
- case 0x2d:
- rbuf[0] = 0x55;
- rbuf[1] = st->signal_sn;
- break;
- case 0x24:
- rbuf[0] = 0x55;
- rbuf[1] = st->signal_lock;
- break;
- case 0x2e:
- case 0x26:
- case 0x27:
- rbuf[0] = 0x55;
- rbuf[1] = 0x00;
- break;
- default:
- lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
- st->i2c_talk_onoff = 1;
- break;
- }
- break;
- case TUNER_S0194:
- switch (wbuf[3]) {
- case 0x18:
- rbuf[0] = 0x55;
- rbuf[1] = (st->signal_level & 0x80)
- ? 0 : (st->signal_level * 2);
- break;
- case 0x24:
- rbuf[0] = 0x55;
- rbuf[1] = st->signal_sn;
- break;
- case 0x1b:
- rbuf[0] = 0x55;
- rbuf[1] = st->signal_lock;
- break;
- case 0x19:
- case 0x25:
- case 0x1e:
- case 0x1d:
- rbuf[0] = 0x55;
- rbuf[1] = 0x00;
- break;
- default:
- lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
- st->i2c_talk_onoff = 1;
- break;
- }
- break;
- case TUNER_RS2000:
- switch (wbuf[3]) {
- case 0x8c:
- rbuf[0] = 0x55;
- rbuf[1] = 0xff;
- if (st->last_key == st->time_key) {
- st->key_timeout++;
- if (st->key_timeout > 5)
- rbuf[1] = 0;
- } else
- st->key_timeout = 0;
- st->last_key = st->time_key;
- break;
- default:
- lme2510_usb_talk(d, wbuf, wlen, rbuf, rlen);
- st->i2c_talk_onoff = 1;
- break;
- }
- default:
- break;
- }
-
- deb_info(4, "I2C From Interrupt Message out(%02x) in(%02x)",
- wbuf[3], rbuf[1]);
-
- }
-
- return ret;
-}
-
-
-static int lme2510_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
- int num)
-{
- struct dvb_usb_device *d = i2c_get_adapdata(adap);
- struct lme2510_state *st = d->priv;
- static u8 obuf[64], ibuf[64];
- int i, read, read_o;
- u16 len;
- u8 gate = st->i2c_gate;
-
- mutex_lock(&d->i2c_mutex);
-
- if (gate == 0)
- gate = 5;
-
- for (i = 0; i < num; i++) {
- read_o = 1 & (msg[i].flags & I2C_M_RD);
- read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
- read |= read_o;
- gate = (msg[i].addr == st->i2c_tuner_addr)
- ? (read) ? st->i2c_tuner_gate_r
- : st->i2c_tuner_gate_w
- : st->i2c_gate;
- obuf[0] = gate | (read << 7);
-
- if (gate == 5)
- obuf[1] = (read) ? 2 : msg[i].len + 1;
- else
- obuf[1] = msg[i].len + read + 1;
-
- obuf[2] = msg[i].addr;
- if (read) {
- if (read_o)
- len = 3;
- else {
- memcpy(&obuf[3], msg[i].buf, msg[i].len);
- obuf[msg[i].len+3] = msg[i+1].len;
- len = msg[i].len+4;
- }
- } else {
- memcpy(&obuf[3], msg[i].buf, msg[i].len);
- len = msg[i].len+3;
- }
-
- if (lme2510_msg(d, obuf, len, ibuf, 64) < 0) {
- deb_info(1, "i2c transfer failed.");
- mutex_unlock(&d->i2c_mutex);
- return -EAGAIN;
- }
-
- if (read) {
- if (read_o)
- memcpy(msg[i].buf, &ibuf[1], msg[i].len);
- else {
- memcpy(msg[i+1].buf, &ibuf[1], msg[i+1].len);
- i++;
- }
- }
- }
-
- mutex_unlock(&d->i2c_mutex);
- return i;
-}
-
-static u32 lme2510_i2c_func(struct i2c_adapter *adapter)
-{
- return I2C_FUNC_I2C;
-}
-
-static struct i2c_algorithm lme2510_i2c_algo = {
- .master_xfer = lme2510_i2c_xfer,
- .functionality = lme2510_i2c_func,
-};
-
-static int lme2510_streaming_ctrl(struct dvb_frontend *fe, int onoff)
-{
- struct dvb_usb_adapter *adap = fe_to_adap(fe);
- struct dvb_usb_device *d = adap_to_d(adap);
- struct lme2510_state *st = adap_to_priv(adap);
- static u8 clear_reg_3[] = LME_ALL_PIDS;
- static u8 rbuf[1];
- int ret = 0, rlen = sizeof(rbuf);
-
- deb_info(1, "STM (%02x)", onoff);
-
- /* Streaming is started by FE_HAS_LOCK */
- if (onoff == 1)
- st->stream_on = 1;
- else {
- deb_info(1, "STM Steam Off");
- /* mutex is here only to avoid collision with I2C */
- mutex_lock(&d->i2c_mutex);
-
- ret = lme2510_usb_talk(d, clear_reg_3,
- sizeof(clear_reg_3), rbuf, rlen);
- st->stream_on = 0;
- st->i2c_talk_onoff = 1;
-
- mutex_unlock(&d->i2c_mutex);
- }
-
- return (ret < 0) ? -ENODEV : 0;
-}
-
-static u8 check_sum(u8 *p, u8 len)
-{
- u8 sum = 0;
- while (len--)
- sum += *p++;
- return sum;
-}
-
-static int lme2510_download_firmware(struct dvb_usb_device *d,
- const struct firmware *fw)
-{
- int ret = 0;
- u8 *data;
- u16 j, wlen, len_in, start, end;
- u8 packet_size, dlen, i;
- u8 *fw_data;
-
- packet_size = 0x31;
- len_in = 1;
-
- data = kzalloc(128, GFP_KERNEL);
- if (!data) {
- info("FRM Could not start Firmware Download"\
- "(Buffer allocation failed)");
- return -ENOMEM;
- }
-
- info("FRM Starting Firmware Download");
-
- for (i = 1; i < 3; i++) {
- start = (i == 1) ? 0 : 512;
- end = (i == 1) ? 512 : fw->size;
- for (j = start; j < end; j += (packet_size+1)) {
- fw_data = (u8 *)(fw->data + j);
- if ((end - j) > packet_size) {
- data[0] = i;
- dlen = packet_size;
- } else {
- data[0] = i | 0x80;
- dlen = (u8)(end - j)-1;
- }
- data[1] = dlen;
- memcpy(&data[2], fw_data, dlen+1);
- wlen = (u8) dlen + 4;
- data[wlen-1] = check_sum(fw_data, dlen+1);
- deb_info(1, "Data S=%02x:E=%02x CS= %02x", data[3],
- data[dlen+2], data[dlen+3]);
- lme2510_usb_talk(d, data, wlen, data, len_in);
- ret |= (data[0] == 0x88) ? 0 : -1;
- }
- }
-
- usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0),
- 0x06, 0x80, 0x0200, 0x00, data, 0x0109, 1000);
-
-
- data[0] = 0x8a;
- len_in = 1;
- msleep(2000);
- lme2510_usb_talk(d, data, len_in, data, len_in);
- msleep(400);
-
- if (ret < 0)
- info("FRM Firmware Download Failed (%04x)" , ret);
- else
- info("FRM Firmware Download Completed - Resetting Device");
-
- kfree(data);
- return RECONNECTS_USB;
-}
-
-static void lme_coldreset(struct dvb_usb_device *d)
-{
- u8 data[1] = {0};
- data[0] = 0x0a;
- info("FRM Firmware Cold Reset");
-
- lme2510_usb_talk(d, data, sizeof(data), data, sizeof(data));
-
- return;
-}
-
-static const char fw_c_s7395[] = LME2510_C_S7395;
-static const char fw_c_lg[] = LME2510_C_LG;
-static const char fw_c_s0194[] = LME2510_C_S0194;
-static const char fw_c_rs2000[] = LME2510_C_RS2000;
-static const char fw_lg[] = LME2510_LG;
-static const char fw_s0194[] = LME2510_S0194;
-
-const char *lme_firmware_switch(struct dvb_usb_device *d, int cold)
-{
- struct lme2510_state *st = d->priv;
- struct usb_device *udev = d->udev;
- const struct firmware *fw = NULL;
- const char *fw_lme;
- int ret = 0;
-
- cold = (cold > 0) ? (cold & 1) : 0;
-
- switch (le16_to_cpu(udev->descriptor.idProduct)) {
- case 0x1122:
- switch (st->dvb_usb_lme2510_firmware) {
- default:
- st->dvb_usb_lme2510_firmware = TUNER_S0194;
- case TUNER_S0194:
- fw_lme = fw_s0194;
- ret = request_firmware(&fw, fw_lme, &udev->dev);
- if (ret == 0) {
- cold = 0;
- break;
- }
- st->dvb_usb_lme2510_firmware = TUNER_LG;
- case TUNER_LG:
- fw_lme = fw_lg;
- ret = request_firmware(&fw, fw_lme, &udev->dev);
- if (ret == 0)
- break;
- st->dvb_usb_lme2510_firmware = TUNER_DEFAULT;
- break;
- }
- break;
- case 0x1120:
- switch (st->dvb_usb_lme2510_firmware) {
- default:
- st->dvb_usb_lme2510_firmware = TUNER_S7395;
- case TUNER_S7395:
- fw_lme = fw_c_s7395;
- ret = request_firmware(&fw, fw_lme, &udev->dev);
- if (ret == 0) {
- cold = 0;
- break;
- }
- st->dvb_usb_lme2510_firmware = TUNER_LG;
- case TUNER_LG:
- fw_lme = fw_c_lg;
- ret = request_firmware(&fw, fw_lme, &udev->dev);
- if (ret == 0)
- break;
- st->dvb_usb_lme2510_firmware = TUNER_S0194;
- case TUNER_S0194:
- fw_lme = fw_c_s0194;
- ret = request_firmware(&fw, fw_lme, &udev->dev);
- if (ret == 0)
- break;
- st->dvb_usb_lme2510_firmware = TUNER_DEFAULT;
- cold = 0;
- break;
- }
- break;
- case 0x22f0:
- fw_lme = fw_c_rs2000;
- st->dvb_usb_lme2510_firmware = TUNER_RS2000;
- break;
- default:
- fw_lme = fw_c_s7395;
- }
-
- release_firmware(fw);
-
- if (cold) {
- dvb_usb_lme2510_firmware = st->dvb_usb_lme2510_firmware;
- info("FRM Changing to %s firmware", fw_lme);
- lme_coldreset(d);
- return NULL;
- }
-
- return fw_lme;
-}
-
-static int lme2510_kill_urb(struct usb_data_stream *stream)
-{
- int i;
-
- for (i = 0; i < stream->urbs_submitted; i++) {
- deb_info(3, "killing URB no. %d.", i);
- /* stop the URB */
- usb_kill_urb(stream->urb_list[i]);
- }
- stream->urbs_submitted = 0;
-
- return 0;
-}
-
-static struct tda10086_config tda10086_config = {
- .demod_address = 0x1c,
- .invert = 0,
- .diseqc_tone = 1,
- .xtal_freq = TDA10086_XTAL_16M,
-};
-
-static struct stv0288_config lme_config = {
- .demod_address = 0xd0,
- .min_delay_ms = 15,
- .inittab = s7395_inittab,
-};
-
-static struct ix2505v_config lme_tuner = {
- .tuner_address = 0xc0,
- .min_delay_ms = 100,
- .tuner_gain = 0x0,
- .tuner_chargepump = 0x3,
-};
-
-static struct stv0299_config sharp_z0194_config = {
- .demod_address = 0xd0,
- .inittab = sharp_z0194a_inittab,
- .mclk = 88000000UL,
- .invert = 0,
- .skip_reinit = 0,
- .lock_output = STV0299_LOCKOUTPUT_1,
- .volt13_op0_op1 = STV0299_VOLT13_OP1,
- .min_delay_ms = 100,
- .set_symbol_rate = sharp_z0194a_set_symbol_rate,
-};
-
-static int dm04_rs2000_set_ts_param(struct dvb_frontend *fe,
- int caller)
-{
- struct dvb_usb_adapter *adap = fe_to_adap(fe);
- struct dvb_usb_device *d = adap_to_d(adap);
- struct lme2510_state *st = d->priv;
-
- mutex_lock(&d->i2c_mutex);
- if ((st->i2c_talk_onoff == 1) && (st->stream_on & 1)) {
- st->i2c_talk_onoff = 0;
- lme2510_stream_restart(d);
- }
- mutex_unlock(&d->i2c_mutex);
-
- return 0;
-}
-
-static struct m88rs2000_config m88rs2000_config = {
- .demod_addr = 0xd0,
- .tuner_addr = 0xc0,
- .set_ts_params = dm04_rs2000_set_ts_param,
-};
-
-static int dm04_lme2510_set_voltage(struct dvb_frontend *fe,
- fe_sec_voltage_t voltage)
-{
- struct dvb_usb_device *d = fe_to_d(fe);
- struct lme2510_state *st = fe_to_priv(fe);
- static u8 voltage_low[] = LME_VOLTAGE_L;
- static u8 voltage_high[] = LME_VOLTAGE_H;
- static u8 rbuf[1];
- int ret = 0, len = 3, rlen = 1;
-
- mutex_lock(&d->i2c_mutex);
-
- switch (voltage) {
- case SEC_VOLTAGE_18:
- ret |= lme2510_usb_talk(d,
- voltage_high, len, rbuf, rlen);
- break;
-
- case SEC_VOLTAGE_OFF:
- case SEC_VOLTAGE_13:
- default:
- ret |= lme2510_usb_talk(d,
- voltage_low, len, rbuf, rlen);
- break;
- }
-
- mutex_unlock(&d->i2c_mutex);
-
- if (st->tuner_config == TUNER_RS2000)
- if (st->fe_set_voltage)
- st->fe_set_voltage(fe, voltage);
-
-
- return (ret < 0) ? -ENODEV : 0;
-}
-
-static int dm04_rs2000_read_signal_strength(struct dvb_frontend *fe,
- u16 *strength)
-{
- struct lme2510_state *st = fe_to_priv(fe);
-
- *strength = (u16)((u32)st->signal_level * 0xffff / 0xff);
-
- return 0;
-}
-
-static int dm04_rs2000_read_snr(struct dvb_frontend *fe, u16 *snr)
-{
- struct lme2510_state *st = fe_to_priv(fe);
-
- *snr = (u16)((u32)st->signal_sn * 0xffff / 0x7f);
-
- return 0;
-}
-
-static int dm04_read_ber(struct dvb_frontend *fe, u32 *ber)
-{
- *ber = 0;
-
- return 0;
-}
-
-static int dm04_read_ucblocks(struct dvb_frontend *fe, u32 *ucblocks)
-{
- *ucblocks = 0;
-
- return 0;
-}
-
-static int lme_name(struct dvb_usb_adapter *adap)
-{
- struct dvb_usb_device *d = adap_to_d(adap);
- struct lme2510_state *st = adap_to_priv(adap);
- const char *desc = d->name;
- char *fe_name[] = {"", " LG TDQY-P001F", " SHARP:BS2F7HZ7395",
- " SHARP:BS2F7HZ0194", " RS2000"};
- char *name = adap->fe[0]->ops.info.name;
-
- strlcpy(name, desc, 128);
- strlcat(name, fe_name[st->tuner_config], 128);
-
- return 0;
-}
-
-static int dm04_lme2510_frontend_attach(struct dvb_usb_adapter *adap)
-{
- struct dvb_usb_device *d = adap_to_d(adap);
- struct lme2510_state *st = d->priv;
- int ret = 0;
-
- st->i2c_talk_onoff = 1;
- switch (le16_to_cpu(d->udev->descriptor.idProduct)) {
- case 0x1122:
- case 0x1120:
- st->i2c_gate = 4;
- adap->fe[0] = dvb_attach(tda10086_attach,
- &tda10086_config, &d->i2c_adap);
- if (adap->fe[0]) {
- info("TUN Found Frontend TDA10086");
- st->i2c_tuner_gate_w = 4;
- st->i2c_tuner_gate_r = 4;
- st->i2c_tuner_addr = 0xc0;
- st->tuner_config = TUNER_LG;
- if (st->dvb_usb_lme2510_firmware != TUNER_LG) {
- st->dvb_usb_lme2510_firmware = TUNER_LG;
- ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
- }
- break;
- }
-
- st->i2c_gate = 4;
- adap->fe[0] = dvb_attach(stv0299_attach,
- &sharp_z0194_config, &d->i2c_adap);
- if (adap->fe[0]) {
- info("FE Found Stv0299");
- st->i2c_tuner_gate_w = 4;
- st->i2c_tuner_gate_r = 5;
- st->i2c_tuner_addr = 0xc0;
- st->tuner_config = TUNER_S0194;
- if (st->dvb_usb_lme2510_firmware != TUNER_S0194) {
- st->dvb_usb_lme2510_firmware = TUNER_S0194;
- ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
- }
- break;
- }
-
- st->i2c_gate = 5;
- adap->fe[0] = dvb_attach(stv0288_attach, &lme_config,
- &d->i2c_adap);
-
- if (adap->fe[0]) {
- info("FE Found Stv0288");
- st->i2c_tuner_gate_w = 4;
- st->i2c_tuner_gate_r = 5;
- st->i2c_tuner_addr = 0xc0;
- st->tuner_config = TUNER_S7395;
- if (st->dvb_usb_lme2510_firmware != TUNER_S7395) {
- st->dvb_usb_lme2510_firmware = TUNER_S7395;
- ret = lme_firmware_switch(d, 1) ? 0 : -ENODEV;
- }
- break;
- }
- case 0x22f0:
- st->i2c_gate = 5;
- adap->fe[0] = dvb_attach(m88rs2000_attach,
- &m88rs2000_config, &d->i2c_adap);
-
- if (adap->fe[0]) {
- info("FE Found M88RS2000");
- st->i2c_tuner_gate_w = 5;
- st->i2c_tuner_gate_r = 5;
- st->i2c_tuner_addr = 0xc0;
- st->tuner_config = TUNER_RS2000;
- st->fe_set_voltage =
- adap->fe[0]->ops.set_voltage;
-
- adap->fe[0]->ops.read_signal_strength =
- dm04_rs2000_read_signal_strength;
- adap->fe[0]->ops.read_snr =
- dm04_rs2000_read_snr;
- adap->fe[0]->ops.read_ber =
- dm04_read_ber;
- adap->fe[0]->ops.read_ucblocks =
- dm04_read_ucblocks;
- }
- break;
- }
-
- if (adap->fe[0] == NULL) {
- info("DM04/QQBOX Not Powered up or not Supported");
- return -ENODEV;
- }
-
- if (ret) {
- if (adap->fe[0]) {
- dvb_frontend_detach(adap->fe[0]);
- adap->fe[0] = NULL;
- }
- d->rc_map = NULL;
- return -ENODEV;
- }
-
- adap->fe[0]->ops.set_voltage = dm04_lme2510_set_voltage;
- ret = lme_name(adap);
- return ret;
-}
-
-static int dm04_lme2510_tuner(struct dvb_usb_adapter *adap)
-{
- struct dvb_usb_device *d = adap_to_d(adap);
- struct lme2510_state *st = adap_to_priv(adap);
- char *tun_msg[] = {"", "TDA8263", "IX2505V", "DVB_PLL_OPERA", "RS2000"};
- int ret = 0;
-
- switch (st->tuner_config) {
- case TUNER_LG:
- if (dvb_attach(tda826x_attach, adap->fe[0], 0xc0,
- &d->i2c_adap, 1))
- ret = st->tuner_config;
- break;
- case TUNER_S7395:
- if (dvb_attach(ix2505v_attach , adap->fe[0], &lme_tuner,
- &d->i2c_adap))
- ret = st->tuner_config;
- break;
- case TUNER_S0194:
- if (dvb_attach(dvb_pll_attach , adap->fe[0], 0xc0,
- &d->i2c_adap, DVB_PLL_OPERA1))
- ret = st->tuner_config;
- break;
- case TUNER_RS2000:
- ret = st->tuner_config;
- break;
- default:
- break;
- }
-
- if (ret)
- info("TUN Found %s tuner", tun_msg[ret]);
- else {
- info("TUN No tuner found --- resetting device");
- lme_coldreset(d);
- return -ENODEV;
- }
-
- /* Start the Interrupt*/
- ret = lme2510_int_read(adap);
- if (ret < 0) {
- info("INT Unable to start Interrupt Service");
- return -ENODEV;
- }
-
- return ret;
-}
-
-static int lme2510_powerup(struct dvb_usb_device *d, int onoff)
-{
- struct lme2510_state *st = d->priv;
- static u8 lnb_on[] = LNB_ON;
- static u8 lnb_off[] = LNB_OFF;
- static u8 rbuf[1];
- int ret = 0, len = 3, rlen = 1;
-
- mutex_lock(&d->i2c_mutex);
-
- if (onoff)
- ret = lme2510_usb_talk(d, lnb_on, len, rbuf, rlen);
- else
- ret = lme2510_usb_talk(d, lnb_off, len, rbuf, rlen);
-
- st->i2c_talk_onoff = 1;
-
- mutex_unlock(&d->i2c_mutex);
-
- return ret;
-}
-
-static int lme2510_get_adapter_count(struct dvb_usb_device *d)
-{
- return 1;
-}
-
-static int lme2510_identify_state(struct dvb_usb_device *d, const char **name)
-{
- struct lme2510_state *st = d->priv;
-
- usb_reset_configuration(d->udev);
-
- usb_set_interface(d->udev,
- d->intf->cur_altsetting->desc.bInterfaceNumber, 1);
-
- st->dvb_usb_lme2510_firmware = dvb_usb_lme2510_firmware;
-
- if (lme2510_return_status(d) == 0x44) {
- *name = lme_firmware_switch(d, 0);
- return COLD;
- }
-
- return 0;
-}
-
-static int lme2510_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
- struct usb_data_stream_properties *stream)
-{
- struct dvb_usb_adapter *adap = fe_to_adap(fe);
- struct dvb_usb_device *d = adap_to_d(adap);
-
- if (adap == NULL)
- return 0;
- /* Turn PID filter on the fly by module option */
- if (pid_filter == 2) {
- adap->pid_filtering = 1;
- adap->max_feed_count = 15;
- }
-
- if (!(le16_to_cpu(d->udev->descriptor.idProduct)
- == 0x1122))
- stream->endpoint = 0x8;
-
- return 0;
-}
-
-static int lme2510_get_rc_config(struct dvb_usb_device *d,
- struct dvb_usb_rc *rc)
-{
- rc->allowed_protos = RC_TYPE_NEC;
- return 0;
-}
-
-static void *lme2510_exit_int(struct dvb_usb_device *d)
-{
- struct lme2510_state *st = d->priv;
- struct dvb_usb_adapter *adap = &d->adapter[0];
- void *buffer = NULL;
-
- if (adap != NULL) {
- lme2510_kill_urb(&adap->stream);
- }
-
- if (st->usb_buffer != NULL) {
- st->i2c_talk_onoff = 1;
- st->signal_lock = 0;
- st->signal_level = 0;
- st->signal_sn = 0;
- buffer = st->usb_buffer;
- }
-
- if (st->lme_urb != NULL) {
- usb_kill_urb(st->lme_urb);
- usb_free_coherent(d->udev, 128, st->buffer,
- st->lme_urb->transfer_dma);
- info("Interrupt Service Stopped");
- }
-
- return buffer;
-}
-
-static void lme2510_exit(struct dvb_usb_device *d)
-{
- void *usb_buffer;
-
- if (d != NULL) {
- usb_buffer = lme2510_exit_int(d);
- if (usb_buffer != NULL)
- kfree(usb_buffer);
- }
-}
-
-static struct dvb_usb_device_properties lme2510_props = {
- .driver_name = KBUILD_MODNAME,
- .owner = THIS_MODULE,
- .bInterfaceNumber = 0,
- .adapter_nr = adapter_nr,
- .size_of_priv = sizeof(struct lme2510_state),
-
- .download_firmware = lme2510_download_firmware,
-
- .power_ctrl = lme2510_powerup,
- .identify_state = lme2510_identify_state,
- .i2c_algo = &lme2510_i2c_algo,
-
- .frontend_attach = dm04_lme2510_frontend_attach,
- .tuner_attach = dm04_lme2510_tuner,
- .get_stream_config = lme2510_get_stream_config,
- .get_adapter_count = lme2510_get_adapter_count,
- .streaming_ctrl = lme2510_streaming_ctrl,
-
- .get_rc_config = lme2510_get_rc_config,
-
- .exit = lme2510_exit,
- .adapter = {
- {
- .caps = DVB_USB_ADAP_HAS_PID_FILTER|
- DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
- .pid_filter_count = 15,
- .pid_filter = lme2510_pid_filter,
- .pid_filter_ctrl = lme2510_pid_filter_ctrl,
- .stream =
- DVB_USB_STREAM_BULK(0x86, 10, 4096),
- },
- {
- }
- },
-};
-
-static const struct usb_device_id lme2510_id_table[] = {
- { DVB_USB_DEVICE(0x3344, 0x1122, &lme2510_props,
- "DM04_LME2510_DVB-S", RC_MAP_LME2510) },
- { DVB_USB_DEVICE(0x3344, 0x1120, &lme2510_props,
- "DM04_LME2510C_DVB-S", RC_MAP_LME2510) },
- { DVB_USB_DEVICE(0x3344, 0x22f0, &lme2510_props,
- "DM04_LME2510C_DVB-S RS2000", RC_MAP_LME2510) },
- {} /* Terminating entry */
-};
-
-MODULE_DEVICE_TABLE(usb, lme2510_id_table);
-
-static struct usb_driver lme2510_driver = {
- .name = KBUILD_MODNAME,
- .probe = dvb_usbv2_probe,
- .disconnect = dvb_usbv2_disconnect,
- .id_table = lme2510_id_table,
- .no_dynamic_id = 1,
- .soft_unbind = 1,
-};
-
-module_usb_driver(lme2510_driver);
-
-MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
-MODULE_DESCRIPTION("LME2510(C) DVB-S USB2.0");
-MODULE_VERSION("2.06");
-MODULE_LICENSE("GPL");
-MODULE_FIRMWARE(LME2510_C_S7395);
-MODULE_FIRMWARE(LME2510_C_LG);
-MODULE_FIRMWARE(LME2510_C_S0194);
-MODULE_FIRMWARE(LME2510_C_RS2000);
-MODULE_FIRMWARE(LME2510_LG);
-MODULE_FIRMWARE(LME2510_S0194);
-
+++ /dev/null
-/* DVB USB compliant linux driver for
- *
- * DM04/QQBOX DVB-S USB BOX LME2510C + SHARP:BS2F7HZ7395
- * LME2510C + LG TDQY-P001F
- * LME2510 + LG TDQY-P001F
- *
- * MVB7395 (LME2510C+SHARP:BS2F7HZ7395)
- * SHARP:BS2F7HZ7395 = (STV0288+Sharp IX2505V)
- *
- * MVB001F (LME2510+LGTDQT-P001F)
- * LG TDQY - P001F =(TDA8263 + TDA10086H)
- *
- * MVB0001F (LME2510C+LGTDQT-P001F)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation, version 2.
- * *
- * see Documentation/dvb/README.dvb-usb for more information
- */
-#ifndef _DVB_USB_LME2510_H_
-#define _DVB_USB_LME2510_H_
-
-/* Streamer & PID
- *
- * Note: These commands do not actually stop the streaming
- * but form some kind of packet filtering/stream count
- * or tuning related functions.
- * 06 XX
- * offset 1 = 00 Enable Streaming
- *
- *
- * PID
- * 03 XX XX ----> reg number ---> setting....20 XX
- * offset 1 = length
- * offset 2 = start of data
- * end byte -1 = 20
- * end byte = clear pid always a0, other wise 9c, 9a ??
- *
-*/
-#define LME_ST_ON_W {0x06, 0x00}
-#define LME_CLEAR_PID {0x03, 0x02, 0x20, 0xa0}
-#define LME_ZERO_PID {0x03, 0x06, 0x00, 0x00, 0x01, 0x00, 0x20, 0x9c}
-#define LME_ALL_PIDS {0x03, 0x06, 0x00, 0xff, 0x01, 0x1f, 0x20, 0x81}
-
-/* LNB Voltage
- * 07 XX XX
- * offset 1 = 01
- * offset 2 = 00=Voltage low 01=Voltage high
- *
- * LNB Power
- * 03 01 XX
- * offset 2 = 00=ON 01=OFF
- */
-
-#define LME_VOLTAGE_L {0x07, 0x01, 0x00}
-#define LME_VOLTAGE_H {0x07, 0x01, 0x01}
-#define LNB_ON {0x3a, 0x01, 0x00}
-#define LNB_OFF {0x3a, 0x01, 0x01}
-
-/* Initial stv0288 settings for 7395 Frontend */
-static u8 s7395_inittab[] = {
- 0x01, 0x15,
- 0x02, 0x20,
- 0x03, 0xa0,
- 0x04, 0xa0,
- 0x05, 0x12,
- 0x06, 0x00,
- 0x09, 0x00,
- 0x0a, 0x04,
- 0x0b, 0x00,
- 0x0c, 0x00,
- 0x0d, 0x00,
- 0x0e, 0xc1,
- 0x0f, 0x54,
- 0x11, 0x7a,
- 0x12, 0x03,
- 0x13, 0x48,
- 0x14, 0x84,
- 0x15, 0xc5,
- 0x16, 0xb8,
- 0x17, 0x9c,
- 0x18, 0x00,
- 0x19, 0xa6,
- 0x1a, 0x88,
- 0x1b, 0x8f,
- 0x1c, 0xf0,
- 0x20, 0x0b,
- 0x21, 0x54,
- 0x22, 0xff,
- 0x23, 0x01,
- 0x28, 0x46,
- 0x29, 0x66,
- 0x2a, 0x90,
- 0x2b, 0xfa,
- 0x2c, 0xd9,
- 0x30, 0x0,
- 0x31, 0x1e,
- 0x32, 0x14,
- 0x33, 0x0f,
- 0x34, 0x09,
- 0x35, 0x0c,
- 0x36, 0x05,
- 0x37, 0x2f,
- 0x38, 0x16,
- 0x39, 0xbd,
- 0x3a, 0x0,
- 0x3b, 0x13,
- 0x3c, 0x11,
- 0x3d, 0x30,
- 0x40, 0x63,
- 0x41, 0x04,
- 0x42, 0x20,
- 0x43, 0x00,
- 0x44, 0x00,
- 0x45, 0x00,
- 0x46, 0x00,
- 0x47, 0x00,
- 0x4a, 0x00,
- 0x50, 0x10,
- 0x51, 0x36,
- 0x52, 0x21,
- 0x53, 0x94,
- 0x54, 0xb2,
- 0x55, 0x29,
- 0x56, 0x64,
- 0x57, 0x2b,
- 0x58, 0x54,
- 0x59, 0x86,
- 0x5a, 0x00,
- 0x5b, 0x9b,
- 0x5c, 0x08,
- 0x5d, 0x7f,
- 0x5e, 0xff,
- 0x5f, 0x8d,
- 0x70, 0x0,
- 0x71, 0x0,
- 0x72, 0x0,
- 0x74, 0x0,
- 0x75, 0x0,
- 0x76, 0x0,
- 0x81, 0x0,
- 0x82, 0x3f,
- 0x83, 0x3f,
- 0x84, 0x0,
- 0x85, 0x0,
- 0x88, 0x0,
- 0x89, 0x0,
- 0x8a, 0x0,
- 0x8b, 0x0,
- 0x8c, 0x0,
- 0x90, 0x0,
- 0x91, 0x0,
- 0x92, 0x0,
- 0x93, 0x0,
- 0x94, 0x1c,
- 0x97, 0x0,
- 0xa0, 0x48,
- 0xa1, 0x0,
- 0xb0, 0xb8,
- 0xb1, 0x3a,
- 0xb2, 0x10,
- 0xb3, 0x82,
- 0xb4, 0x80,
- 0xb5, 0x82,
- 0xb6, 0x82,
- 0xb7, 0x82,
- 0xb8, 0x20,
- 0xb9, 0x0,
- 0xf0, 0x0,
- 0xf1, 0x0,
- 0xf2, 0xc0,
- 0xff, 0xff,
-};
-#endif
projects / ~emulex / infiniband.git / commitdiff