obj-y += hvlog.o hvlpconfig.o lpardata.o setup.o mf.o lpevents.o \
hvcall.o proc.o htab.o iommu.o
+obj-$(CONFIG_PCI) += pci.o
--- /dev/null
+/*
+ * Copyright (C) 2001 Allan Trautman, IBM Corporation
+ *
+ * iSeries specific routines for PCI.
+ *
+ * Based on code from pci.c and iSeries_pci.c 32bit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/ide.h>
+#include <linux/pci.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/prom.h>
+#include <asm/machdep.h>
+#include <asm/pci-bridge.h>
+#include <asm/ppcdebug.h>
+#include <asm/iommu.h>
+
+#include <asm/iSeries/HvCallPci.h>
+#include <asm/iSeries/HvCallXm.h>
+#include <asm/iSeries/iSeries_irq.h>
+#include <asm/iSeries/iSeries_pci.h>
+#include <asm/iSeries/mf.h>
+
+#include <asm/ppc-pci.h>
+
+extern unsigned long io_page_mask;
+
+/*
+ * Forward declares of prototypes.
+ */
+static struct iSeries_Device_Node *find_Device_Node(int bus, int devfn);
+static void scan_PHB_slots(struct pci_controller *Phb);
+static void scan_EADS_bridge(HvBusNumber Bus, HvSubBusNumber SubBus, int IdSel);
+static int scan_bridge_slot(HvBusNumber Bus, struct HvCallPci_BridgeInfo *Info);
+
+LIST_HEAD(iSeries_Global_Device_List);
+
+static int DeviceCount;
+
+/* Counters and control flags. */
+static long Pci_Io_Read_Count;
+static long Pci_Io_Write_Count;
+#if 0
+static long Pci_Cfg_Read_Count;
+static long Pci_Cfg_Write_Count;
+#endif
+static long Pci_Error_Count;
+
+static int Pci_Retry_Max = 3; /* Only retry 3 times */
+static int Pci_Error_Flag = 1; /* Set Retry Error on. */
+
+static struct pci_ops iSeries_pci_ops;
+
+/*
+ * Table defines
+ * Each Entry size is 4 MB * 1024 Entries = 4GB I/O address space.
+ */
+#define IOMM_TABLE_MAX_ENTRIES 1024
+#define IOMM_TABLE_ENTRY_SIZE 0x0000000000400000UL
+#define BASE_IO_MEMORY 0xE000000000000000UL
+
+static unsigned long max_io_memory = 0xE000000000000000UL;
+static long current_iomm_table_entry;
+
+/*
+ * Lookup Tables.
+ */
+static struct iSeries_Device_Node **iomm_table;
+static u8 *iobar_table;
+
+/*
+ * Static and Global variables
+ */
+static char *pci_io_text = "iSeries PCI I/O";
+static DEFINE_SPINLOCK(iomm_table_lock);
+
+/*
+ * iomm_table_initialize
+ *
+ * Allocates and initalizes the Address Translation Table and Bar
+ * Tables to get them ready for use. Must be called before any
+ * I/O space is handed out to the device BARs.
+ */
+static void iomm_table_initialize(void)
+{
+ spin_lock(&iomm_table_lock);
+ iomm_table = kmalloc(sizeof(*iomm_table) * IOMM_TABLE_MAX_ENTRIES,
+ GFP_KERNEL);
+ iobar_table = kmalloc(sizeof(*iobar_table) * IOMM_TABLE_MAX_ENTRIES,
+ GFP_KERNEL);
+ spin_unlock(&iomm_table_lock);
+ if ((iomm_table == NULL) || (iobar_table == NULL))
+ panic("PCI: I/O tables allocation failed.\n");
+}
+
+/*
+ * iomm_table_allocate_entry
+ *
+ * Adds pci_dev entry in address translation table
+ *
+ * - Allocates the number of entries required in table base on BAR
+ * size.
+ * - Allocates starting at BASE_IO_MEMORY and increases.
+ * - The size is round up to be a multiple of entry size.
+ * - CurrentIndex is incremented to keep track of the last entry.
+ * - Builds the resource entry for allocated BARs.
+ */
+static void iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
+{
+ struct resource *bar_res = &dev->resource[bar_num];
+ long bar_size = pci_resource_len(dev, bar_num);
+
+ /*
+ * No space to allocate, quick exit, skip Allocation.
+ */
+ if (bar_size == 0)
+ return;
+ /*
+ * Set Resource values.
+ */
+ spin_lock(&iomm_table_lock);
+ bar_res->name = pci_io_text;
+ bar_res->start =
+ IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry;
+ bar_res->start += BASE_IO_MEMORY;
+ bar_res->end = bar_res->start + bar_size - 1;
+ /*
+ * Allocate the number of table entries needed for BAR.
+ */
+ while (bar_size > 0 ) {
+ iomm_table[current_iomm_table_entry] = dev->sysdata;
+ iobar_table[current_iomm_table_entry] = bar_num;
+ bar_size -= IOMM_TABLE_ENTRY_SIZE;
+ ++current_iomm_table_entry;
+ }
+ max_io_memory = BASE_IO_MEMORY +
+ (IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry);
+ spin_unlock(&iomm_table_lock);
+}
+
+/*
+ * allocate_device_bars
+ *
+ * - Allocates ALL pci_dev BAR's and updates the resources with the
+ * BAR value. BARS with zero length will have the resources
+ * The HvCallPci_getBarParms is used to get the size of the BAR
+ * space. It calls iomm_table_allocate_entry to allocate
+ * each entry.
+ * - Loops through The Bar resources(0 - 5) including the ROM
+ * is resource(6).
+ */
+static void allocate_device_bars(struct pci_dev *dev)
+{
+ struct resource *bar_res;
+ int bar_num;
+
+ for (bar_num = 0; bar_num <= PCI_ROM_RESOURCE; ++bar_num) {
+ bar_res = &dev->resource[bar_num];
+ iomm_table_allocate_entry(dev, bar_num);
+ }
+}
+
+/*
+ * Log error information to system console.
+ * Filter out the device not there errors.
+ * PCI: EADs Connect Failed 0x18.58.10 Rc: 0x00xx
+ * PCI: Read Vendor Failed 0x18.58.10 Rc: 0x00xx
+ * PCI: Connect Bus Unit Failed 0x18.58.10 Rc: 0x00xx
+ */
+static void pci_Log_Error(char *Error_Text, int Bus, int SubBus,
+ int AgentId, int HvRc)
+{
+ if (HvRc == 0x0302)
+ return;
+ printk(KERN_ERR "PCI: %s Failed: 0x%02X.%02X.%02X Rc: 0x%04X",
+ Error_Text, Bus, SubBus, AgentId, HvRc);
+}
+
+/*
+ * build_device_node(u16 Bus, int SubBus, u8 DevFn)
+ */
+static struct iSeries_Device_Node *build_device_node(HvBusNumber Bus,
+ HvSubBusNumber SubBus, int AgentId, int Function)
+{
+ struct iSeries_Device_Node *node;
+
+ PPCDBG(PPCDBG_BUSWALK,
+ "-build_device_node 0x%02X.%02X.%02X Function: %02X\n",
+ Bus, SubBus, AgentId, Function);
+
+ node = kmalloc(sizeof(struct iSeries_Device_Node), GFP_KERNEL);
+ if (node == NULL)
+ return NULL;
+
+ memset(node, 0, sizeof(struct iSeries_Device_Node));
+ list_add_tail(&node->Device_List, &iSeries_Global_Device_List);
+#if 0
+ node->DsaAddr = ((u64)Bus << 48) + ((u64)SubBus << 40) + ((u64)0x10 << 32);
+#endif
+ node->DsaAddr.DsaAddr = 0;
+ node->DsaAddr.Dsa.busNumber = Bus;
+ node->DsaAddr.Dsa.subBusNumber = SubBus;
+ node->DsaAddr.Dsa.deviceId = 0x10;
+ node->DevFn = PCI_DEVFN(ISERIES_ENCODE_DEVICE(AgentId), Function);
+ return node;
+}
+
+/*
+ * unsigned long __init find_and_init_phbs(void)
+ *
+ * Description:
+ * This function checks for all possible system PCI host bridges that connect
+ * PCI buses. The system hypervisor is queried as to the guest partition
+ * ownership status. A pci_controller is built for any bus which is partially
+ * owned or fully owned by this guest partition.
+ */
+unsigned long __init find_and_init_phbs(void)
+{
+ struct pci_controller *phb;
+ HvBusNumber bus;
+
+ PPCDBG(PPCDBG_BUSWALK, "find_and_init_phbs Entry\n");
+
+ /* Check all possible buses. */
+ for (bus = 0; bus < 256; bus++) {
+ int ret = HvCallXm_testBus(bus);
+ if (ret == 0) {
+ printk("bus %d appears to exist\n", bus);
+
+ phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL);
+ if (phb == NULL)
+ return -ENOMEM;
+ pci_setup_pci_controller(phb);
+
+ phb->pci_mem_offset = phb->local_number = bus;
+ phb->first_busno = bus;
+ phb->last_busno = bus;
+ phb->ops = &iSeries_pci_ops;
+
+ PPCDBG(PPCDBG_BUSWALK, "PCI:Create iSeries pci_controller(%p), Bus: %04X\n",
+ phb, bus);
+
+ /* Find and connect the devices. */
+ scan_PHB_slots(phb);
+ }
+ /*
+ * Check for Unexpected Return code, a clue that something
+ * has gone wrong.
+ */
+ else if (ret != 0x0301)
+ printk(KERN_ERR "Unexpected Return on Probe(0x%04X): 0x%04X",
+ bus, ret);
+ }
+ return 0;
+}
+
+/*
+ * iSeries_pcibios_init
+ *
+ * Chance to initialize and structures or variable before PCI Bus walk.
+ */
+void iSeries_pcibios_init(void)
+{
+ PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Entry.\n");
+ iomm_table_initialize();
+ find_and_init_phbs();
+ io_page_mask = -1;
+ PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Exit.\n");
+}
+
+/*
+ * iSeries_pci_final_fixup(void)
+ */
+void __init iSeries_pci_final_fixup(void)
+{
+ struct pci_dev *pdev = NULL;
+ struct iSeries_Device_Node *node;
+ int DeviceCount = 0;
+
+ PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n");
+
+ /* Fix up at the device node and pci_dev relationship */
+ mf_display_src(0xC9000100);
+
+ printk("pcibios_final_fixup\n");
+ for_each_pci_dev(pdev) {
+ node = find_Device_Node(pdev->bus->number, pdev->devfn);
+ printk("pci dev %p (%x.%x), node %p\n", pdev,
+ pdev->bus->number, pdev->devfn, node);
+
+ if (node != NULL) {
+ ++DeviceCount;
+ pdev->sysdata = (void *)node;
+ node->PciDev = pdev;
+ PPCDBG(PPCDBG_BUSWALK,
+ "pdev 0x%p <==> DevNode 0x%p\n",
+ pdev, node);
+ allocate_device_bars(pdev);
+ iSeries_Device_Information(pdev, DeviceCount);
+ iommu_devnode_init_iSeries(node);
+ } else
+ printk("PCI: Device Tree not found for 0x%016lX\n",
+ (unsigned long)pdev);
+ pdev->irq = node->Irq;
+ }
+ iSeries_activate_IRQs();
+ mf_display_src(0xC9000200);
+}
+
+void pcibios_fixup_bus(struct pci_bus *PciBus)
+{
+ PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup_bus(0x%04X) Entry.\n",
+ PciBus->number);
+}
+
+void pcibios_fixup_resources(struct pci_dev *pdev)
+{
+ PPCDBG(PPCDBG_BUSWALK, "fixup_resources pdev %p\n", pdev);
+}
+
+/*
+ * Loop through each node function to find usable EADs bridges.
+ */
+static void scan_PHB_slots(struct pci_controller *Phb)
+{
+ struct HvCallPci_DeviceInfo *DevInfo;
+ HvBusNumber bus = Phb->local_number; /* System Bus */
+ const HvSubBusNumber SubBus = 0; /* EADs is always 0. */
+ int HvRc = 0;
+ int IdSel;
+ const int MaxAgents = 8;
+
+ DevInfo = (struct HvCallPci_DeviceInfo*)
+ kmalloc(sizeof(struct HvCallPci_DeviceInfo), GFP_KERNEL);
+ if (DevInfo == NULL)
+ return;
+
+ /*
+ * Probe for EADs Bridges
+ */
+ for (IdSel = 1; IdSel < MaxAgents; ++IdSel) {
+ HvRc = HvCallPci_getDeviceInfo(bus, SubBus, IdSel,
+ ISERIES_HV_ADDR(DevInfo),
+ sizeof(struct HvCallPci_DeviceInfo));
+ if (HvRc == 0) {
+ if (DevInfo->deviceType == HvCallPci_NodeDevice)
+ scan_EADS_bridge(bus, SubBus, IdSel);
+ else
+ printk("PCI: Invalid System Configuration(0x%02X)"
+ " for bus 0x%02x id 0x%02x.\n",
+ DevInfo->deviceType, bus, IdSel);
+ }
+ else
+ pci_Log_Error("getDeviceInfo", bus, SubBus, IdSel, HvRc);
+ }
+ kfree(DevInfo);
+}
+
+static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus,
+ int IdSel)
+{
+ struct HvCallPci_BridgeInfo *BridgeInfo;
+ HvAgentId AgentId;
+ int Function;
+ int HvRc;
+
+ BridgeInfo = (struct HvCallPci_BridgeInfo *)
+ kmalloc(sizeof(struct HvCallPci_BridgeInfo), GFP_KERNEL);
+ if (BridgeInfo == NULL)
+ return;
+
+ /* Note: hvSubBus and irq is always be 0 at this level! */
+ for (Function = 0; Function < 8; ++Function) {
+ AgentId = ISERIES_PCI_AGENTID(IdSel, Function);
+ HvRc = HvCallXm_connectBusUnit(bus, SubBus, AgentId, 0);
+ if (HvRc == 0) {
+ printk("found device at bus %d idsel %d func %d (AgentId %x)\n",
+ bus, IdSel, Function, AgentId);
+ /* Connect EADs: 0x18.00.12 = 0x00 */
+ PPCDBG(PPCDBG_BUSWALK,
+ "PCI:Connect EADs: 0x%02X.%02X.%02X\n",
+ bus, SubBus, AgentId);
+ HvRc = HvCallPci_getBusUnitInfo(bus, SubBus, AgentId,
+ ISERIES_HV_ADDR(BridgeInfo),
+ sizeof(struct HvCallPci_BridgeInfo));
+ if (HvRc == 0) {
+ printk("bridge info: type %x subbus %x maxAgents %x maxsubbus %x logslot %x\n",
+ BridgeInfo->busUnitInfo.deviceType,
+ BridgeInfo->subBusNumber,
+ BridgeInfo->maxAgents,
+ BridgeInfo->maxSubBusNumber,
+ BridgeInfo->logicalSlotNumber);
+ PPCDBG(PPCDBG_BUSWALK,
+ "PCI: BridgeInfo, Type:0x%02X, SubBus:0x%02X, MaxAgents:0x%02X, MaxSubBus: 0x%02X, LSlot: 0x%02X\n",
+ BridgeInfo->busUnitInfo.deviceType,
+ BridgeInfo->subBusNumber,
+ BridgeInfo->maxAgents,
+ BridgeInfo->maxSubBusNumber,
+ BridgeInfo->logicalSlotNumber);
+
+ if (BridgeInfo->busUnitInfo.deviceType ==
+ HvCallPci_BridgeDevice) {
+ /* Scan_Bridge_Slot...: 0x18.00.12 */
+ scan_bridge_slot(bus, BridgeInfo);
+ } else
+ printk("PCI: Invalid Bridge Configuration(0x%02X)",
+ BridgeInfo->busUnitInfo.deviceType);
+ }
+ } else if (HvRc != 0x000B)
+ pci_Log_Error("EADs Connect",
+ bus, SubBus, AgentId, HvRc);
+ }
+ kfree(BridgeInfo);
+}
+
+/*
+ * This assumes that the node slot is always on the primary bus!
+ */
+static int scan_bridge_slot(HvBusNumber Bus,
+ struct HvCallPci_BridgeInfo *BridgeInfo)
+{
+ struct iSeries_Device_Node *node;
+ HvSubBusNumber SubBus = BridgeInfo->subBusNumber;
+ u16 VendorId = 0;
+ int HvRc = 0;
+ u8 Irq = 0;
+ int IdSel = ISERIES_GET_DEVICE_FROM_SUBBUS(SubBus);
+ int Function = ISERIES_GET_FUNCTION_FROM_SUBBUS(SubBus);
+ HvAgentId EADsIdSel = ISERIES_PCI_AGENTID(IdSel, Function);
+
+ /* iSeries_allocate_IRQ.: 0x18.00.12(0xA3) */
+ Irq = iSeries_allocate_IRQ(Bus, 0, EADsIdSel);
+ PPCDBG(PPCDBG_BUSWALK,
+ "PCI:- allocate and assign IRQ 0x%02X.%02X.%02X = 0x%02X\n",
+ Bus, 0, EADsIdSel, Irq);
+
+ /*
+ * Connect all functions of any device found.
+ */
+ for (IdSel = 1; IdSel <= BridgeInfo->maxAgents; ++IdSel) {
+ for (Function = 0; Function < 8; ++Function) {
+ HvAgentId AgentId = ISERIES_PCI_AGENTID(IdSel, Function);
+ HvRc = HvCallXm_connectBusUnit(Bus, SubBus,
+ AgentId, Irq);
+ if (HvRc != 0) {
+ pci_Log_Error("Connect Bus Unit",
+ Bus, SubBus, AgentId, HvRc);
+ continue;
+ }
+
+ HvRc = HvCallPci_configLoad16(Bus, SubBus, AgentId,
+ PCI_VENDOR_ID, &VendorId);
+ if (HvRc != 0) {
+ pci_Log_Error("Read Vendor",
+ Bus, SubBus, AgentId, HvRc);
+ continue;
+ }
+ printk("read vendor ID: %x\n", VendorId);
+
+ /* FoundDevice: 0x18.28.10 = 0x12AE */
+ PPCDBG(PPCDBG_BUSWALK,
+ "PCI:- FoundDevice: 0x%02X.%02X.%02X = 0x%04X, irq %d\n",
+ Bus, SubBus, AgentId, VendorId, Irq);
+ HvRc = HvCallPci_configStore8(Bus, SubBus, AgentId,
+ PCI_INTERRUPT_LINE, Irq);
+ if (HvRc != 0)
+ pci_Log_Error("PciCfgStore Irq Failed!",
+ Bus, SubBus, AgentId, HvRc);
+
+ ++DeviceCount;
+ node = build_device_node(Bus, SubBus, EADsIdSel, Function);
+ node->Irq = Irq;
+ node->LogicalSlot = BridgeInfo->logicalSlotNumber;
+
+ } /* for (Function = 0; Function < 8; ++Function) */
+ } /* for (IdSel = 1; IdSel <= MaxAgents; ++IdSel) */
+ return HvRc;
+}
+
+/*
+ * I/0 Memory copy MUST use mmio commands on iSeries
+ * To do; For performance, include the hv call directly
+ */
+void iSeries_memset_io(volatile void __iomem *dest, char c, size_t Count)
+{
+ u8 ByteValue = c;
+ long NumberOfBytes = Count;
+
+ while (NumberOfBytes > 0) {
+ iSeries_Write_Byte(ByteValue, dest++);
+ -- NumberOfBytes;
+ }
+}
+EXPORT_SYMBOL(iSeries_memset_io);
+
+void iSeries_memcpy_toio(volatile void __iomem *dest, void *source, size_t count)
+{
+ char *src = source;
+ long NumberOfBytes = count;
+
+ while (NumberOfBytes > 0) {
+ iSeries_Write_Byte(*src++, dest++);
+ -- NumberOfBytes;
+ }
+}
+EXPORT_SYMBOL(iSeries_memcpy_toio);
+
+void iSeries_memcpy_fromio(void *dest, const volatile void __iomem *src, size_t count)
+{
+ char *dst = dest;
+ long NumberOfBytes = count;
+
+ while (NumberOfBytes > 0) {
+ *dst++ = iSeries_Read_Byte(src++);
+ -- NumberOfBytes;
+ }
+}
+EXPORT_SYMBOL(iSeries_memcpy_fromio);
+
+/*
+ * Look down the chain to find the matching Device Device
+ */
+static struct iSeries_Device_Node *find_Device_Node(int bus, int devfn)
+{
+ struct list_head *pos;
+
+ list_for_each(pos, &iSeries_Global_Device_List) {
+ struct iSeries_Device_Node *node =
+ list_entry(pos, struct iSeries_Device_Node, Device_List);
+
+ if ((bus == ISERIES_BUS(node)) && (devfn == node->DevFn))
+ return node;
+ }
+ return NULL;
+}
+
+#if 0
+/*
+ * Returns the device node for the passed pci_dev
+ * Sanity Check Node PciDev to passed pci_dev
+ * If none is found, returns a NULL which the client must handle.
+ */
+static struct iSeries_Device_Node *get_Device_Node(struct pci_dev *pdev)
+{
+ struct iSeries_Device_Node *node;
+
+ node = pdev->sysdata;
+ if (node == NULL || node->PciDev != pdev)
+ node = find_Device_Node(pdev->bus->number, pdev->devfn);
+ return node;
+}
+#endif
+
+/*
+ * Config space read and write functions.
+ * For now at least, we look for the device node for the bus and devfn
+ * that we are asked to access. It may be possible to translate the devfn
+ * to a subbus and deviceid more directly.
+ */
+static u64 hv_cfg_read_func[4] = {
+ HvCallPciConfigLoad8, HvCallPciConfigLoad16,
+ HvCallPciConfigLoad32, HvCallPciConfigLoad32
+};
+
+static u64 hv_cfg_write_func[4] = {
+ HvCallPciConfigStore8, HvCallPciConfigStore16,
+ HvCallPciConfigStore32, HvCallPciConfigStore32
+};
+
+/*
+ * Read PCI config space
+ */
+static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int size, u32 *val)
+{
+ struct iSeries_Device_Node *node = find_Device_Node(bus->number, devfn);
+ u64 fn;
+ struct HvCallPci_LoadReturn ret;
+
+ if (node == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset > 255) {
+ *val = ~0;
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+ }
+
+ fn = hv_cfg_read_func[(size - 1) & 3];
+ HvCall3Ret16(fn, &ret, node->DsaAddr.DsaAddr, offset, 0);
+
+ if (ret.rc != 0) {
+ *val = ~0;
+ return PCIBIOS_DEVICE_NOT_FOUND; /* or something */
+ }
+
+ *val = ret.value;
+ return 0;
+}
+
+/*
+ * Write PCI config space
+ */
+
+static int iSeries_pci_write_config(struct pci_bus *bus, unsigned int devfn,
+ int offset, int size, u32 val)
+{
+ struct iSeries_Device_Node *node = find_Device_Node(bus->number, devfn);
+ u64 fn;
+ u64 ret;
+
+ if (node == NULL)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+ if (offset > 255)
+ return PCIBIOS_BAD_REGISTER_NUMBER;
+
+ fn = hv_cfg_write_func[(size - 1) & 3];
+ ret = HvCall4(fn, node->DsaAddr.DsaAddr, offset, val, 0);
+
+ if (ret != 0)
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return 0;
+}
+
+static struct pci_ops iSeries_pci_ops = {
+ .read = iSeries_pci_read_config,
+ .write = iSeries_pci_write_config
+};
+
+/*
+ * Check Return Code
+ * -> On Failure, print and log information.
+ * Increment Retry Count, if exceeds max, panic partition.
+ *
+ * PCI: Device 23.90 ReadL I/O Error( 0): 0x1234
+ * PCI: Device 23.90 ReadL Retry( 1)
+ * PCI: Device 23.90 ReadL Retry Successful(1)
+ */
+static int CheckReturnCode(char *TextHdr, struct iSeries_Device_Node *DevNode,
+ int *retry, u64 ret)
+{
+ if (ret != 0) {
+ ++Pci_Error_Count;
+ (*retry)++;
+ printk("PCI: %s: Device 0x%04X:%02X I/O Error(%2d): 0x%04X\n",
+ TextHdr, DevNode->DsaAddr.Dsa.busNumber, DevNode->DevFn,
+ *retry, (int)ret);
+ /*
+ * Bump the retry and check for retry count exceeded.
+ * If, Exceeded, panic the system.
+ */
+ if (((*retry) > Pci_Retry_Max) &&
+ (Pci_Error_Flag > 0)) {
+ mf_display_src(0xB6000103);
+ panic_timeout = 0;
+ panic("PCI: Hardware I/O Error, SRC B6000103, "
+ "Automatic Reboot Disabled.\n");
+ }
+ return -1; /* Retry Try */
+ }
+ return 0;
+}
+
+/*
+ * Translate the I/O Address into a device node, bar, and bar offset.
+ * Note: Make sure the passed variable end up on the stack to avoid
+ * the exposure of being device global.
+ */
+static inline struct iSeries_Device_Node *xlate_iomm_address(
+ const volatile void __iomem *IoAddress,
+ u64 *dsaptr, u64 *BarOffsetPtr)
+{
+ unsigned long OrigIoAddr;
+ unsigned long BaseIoAddr;
+ unsigned long TableIndex;
+ struct iSeries_Device_Node *DevNode;
+
+ OrigIoAddr = (unsigned long __force)IoAddress;
+ if ((OrigIoAddr < BASE_IO_MEMORY) || (OrigIoAddr >= max_io_memory))
+ return NULL;
+ BaseIoAddr = OrigIoAddr - BASE_IO_MEMORY;
+ TableIndex = BaseIoAddr / IOMM_TABLE_ENTRY_SIZE;
+ DevNode = iomm_table[TableIndex];
+
+ if (DevNode != NULL) {
+ int barnum = iobar_table[TableIndex];
+ *dsaptr = DevNode->DsaAddr.DsaAddr | (barnum << 24);
+ *BarOffsetPtr = BaseIoAddr % IOMM_TABLE_ENTRY_SIZE;
+ } else
+ panic("PCI: Invalid PCI IoAddress detected!\n");
+ return DevNode;
+}
+
+/*
+ * Read MM I/O Instructions for the iSeries
+ * On MM I/O error, all ones are returned and iSeries_pci_IoError is cal
+ * else, data is returned in big Endian format.
+ *
+ * iSeries_Read_Byte = Read Byte ( 8 bit)
+ * iSeries_Read_Word = Read Word (16 bit)
+ * iSeries_Read_Long = Read Long (32 bit)
+ */
+u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress)
+{
+ u64 BarOffset;
+ u64 dsa;
+ int retry = 0;
+ struct HvCallPci_LoadReturn ret;
+ struct iSeries_Device_Node *DevNode =
+ xlate_iomm_address(IoAddress, &dsa, &BarOffset);
+
+ if (DevNode == NULL) {
+ static unsigned long last_jiffies;
+ static int num_printed;
+
+ if ((jiffies - last_jiffies) > 60 * HZ) {
+ last_jiffies = jiffies;
+ num_printed = 0;
+ }
+ if (num_printed++ < 10)
+ printk(KERN_ERR "iSeries_Read_Byte: invalid access at IO address %p\n", IoAddress);
+ return 0xff;
+ }
+ do {
+ ++Pci_Io_Read_Count;
+ HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, BarOffset, 0);
+ } while (CheckReturnCode("RDB", DevNode, &retry, ret.rc) != 0);
+
+ return (u8)ret.value;
+}
+EXPORT_SYMBOL(iSeries_Read_Byte);
+
+u16 iSeries_Read_Word(const volatile void __iomem *IoAddress)
+{
+ u64 BarOffset;
+ u64 dsa;
+ int retry = 0;
+ struct HvCallPci_LoadReturn ret;
+ struct iSeries_Device_Node *DevNode =
+ xlate_iomm_address(IoAddress, &dsa, &BarOffset);
+
+ if (DevNode == NULL) {
+ static unsigned long last_jiffies;
+ static int num_printed;
+
+ if ((jiffies - last_jiffies) > 60 * HZ) {
+ last_jiffies = jiffies;
+ num_printed = 0;
+ }
+ if (num_printed++ < 10)
+ printk(KERN_ERR "iSeries_Read_Word: invalid access at IO address %p\n", IoAddress);
+ return 0xffff;
+ }
+ do {
+ ++Pci_Io_Read_Count;
+ HvCall3Ret16(HvCallPciBarLoad16, &ret, dsa,
+ BarOffset, 0);
+ } while (CheckReturnCode("RDW", DevNode, &retry, ret.rc) != 0);
+
+ return swab16((u16)ret.value);
+}
+EXPORT_SYMBOL(iSeries_Read_Word);
+
+u32 iSeries_Read_Long(const volatile void __iomem *IoAddress)
+{
+ u64 BarOffset;
+ u64 dsa;
+ int retry = 0;
+ struct HvCallPci_LoadReturn ret;
+ struct iSeries_Device_Node *DevNode =
+ xlate_iomm_address(IoAddress, &dsa, &BarOffset);
+
+ if (DevNode == NULL) {
+ static unsigned long last_jiffies;
+ static int num_printed;
+
+ if ((jiffies - last_jiffies) > 60 * HZ) {
+ last_jiffies = jiffies;
+ num_printed = 0;
+ }
+ if (num_printed++ < 10)
+ printk(KERN_ERR "iSeries_Read_Long: invalid access at IO address %p\n", IoAddress);
+ return 0xffffffff;
+ }
+ do {
+ ++Pci_Io_Read_Count;
+ HvCall3Ret16(HvCallPciBarLoad32, &ret, dsa,
+ BarOffset, 0);
+ } while (CheckReturnCode("RDL", DevNode, &retry, ret.rc) != 0);
+
+ return swab32((u32)ret.value);
+}
+EXPORT_SYMBOL(iSeries_Read_Long);
+
+/*
+ * Write MM I/O Instructions for the iSeries
+ *
+ * iSeries_Write_Byte = Write Byte (8 bit)
+ * iSeries_Write_Word = Write Word(16 bit)
+ * iSeries_Write_Long = Write Long(32 bit)
+ */
+void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress)
+{
+ u64 BarOffset;
+ u64 dsa;
+ int retry = 0;
+ u64 rc;
+ struct iSeries_Device_Node *DevNode =
+ xlate_iomm_address(IoAddress, &dsa, &BarOffset);
+
+ if (DevNode == NULL) {
+ static unsigned long last_jiffies;
+ static int num_printed;
+
+ if ((jiffies - last_jiffies) > 60 * HZ) {
+ last_jiffies = jiffies;
+ num_printed = 0;
+ }
+ if (num_printed++ < 10)
+ printk(KERN_ERR "iSeries_Write_Byte: invalid access at IO address %p\n", IoAddress);
+ return;
+ }
+ do {
+ ++Pci_Io_Write_Count;
+ rc = HvCall4(HvCallPciBarStore8, dsa, BarOffset, data, 0);
+ } while (CheckReturnCode("WWB", DevNode, &retry, rc) != 0);
+}
+EXPORT_SYMBOL(iSeries_Write_Byte);
+
+void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress)
+{
+ u64 BarOffset;
+ u64 dsa;
+ int retry = 0;
+ u64 rc;
+ struct iSeries_Device_Node *DevNode =
+ xlate_iomm_address(IoAddress, &dsa, &BarOffset);
+
+ if (DevNode == NULL) {
+ static unsigned long last_jiffies;
+ static int num_printed;
+
+ if ((jiffies - last_jiffies) > 60 * HZ) {
+ last_jiffies = jiffies;
+ num_printed = 0;
+ }
+ if (num_printed++ < 10)
+ printk(KERN_ERR "iSeries_Write_Word: invalid access at IO address %p\n", IoAddress);
+ return;
+ }
+ do {
+ ++Pci_Io_Write_Count;
+ rc = HvCall4(HvCallPciBarStore16, dsa, BarOffset, swab16(data), 0);
+ } while (CheckReturnCode("WWW", DevNode, &retry, rc) != 0);
+}
+EXPORT_SYMBOL(iSeries_Write_Word);
+
+void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress)
+{
+ u64 BarOffset;
+ u64 dsa;
+ int retry = 0;
+ u64 rc;
+ struct iSeries_Device_Node *DevNode =
+ xlate_iomm_address(IoAddress, &dsa, &BarOffset);
+
+ if (DevNode == NULL) {
+ static unsigned long last_jiffies;
+ static int num_printed;
+
+ if ((jiffies - last_jiffies) > 60 * HZ) {
+ last_jiffies = jiffies;
+ num_printed = 0;
+ }
+ if (num_printed++ < 10)
+ printk(KERN_ERR "iSeries_Write_Long: invalid access at IO address %p\n", IoAddress);
+ return;
+ }
+ do {
+ ++Pci_Io_Write_Count;
+ rc = HvCall4(HvCallPciBarStore32, dsa, BarOffset, swab32(data), 0);
+ } while (CheckReturnCode("WWL", DevNode, &retry, rc) != 0);
+}
+EXPORT_SYMBOL(iSeries_Write_Long);
obj-$(CONFIG_PPC_OF) += of_device.o
-pci-obj-$(CONFIG_PPC_ISERIES) += iSeries_pci.o iSeries_irq.o \
+pci-obj-$(CONFIG_PPC_ISERIES) += iSeries_irq.o \
iSeries_VpdInfo.o
pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o
#include <asm/pmac_feature.h>
#include <asm/abs_addr.h>
#include <asm/system.h>
+#include <asm/ppc-pci.h>
-#include "pci.h"
#include "bpa_iommu.h"
static inline unsigned long
#include <asm/time.h>
#include <asm/nvram.h>
#include <asm/cputable.h>
+#include <asm/ppc-pci.h>
-#include "pci.h"
#include "bpa_iic.h"
#include "bpa_iommu.h"
#include <asm/rtas.h>
#include <asm/atomic.h>
#include <asm/systemcfg.h>
-#include "pci.h"
+#include <asm/ppc-pci.h>
#undef DEBUG
+++ /dev/null
-/*
- * iSeries_pci.c
- *
- * Copyright (C) 2001 Allan Trautman, IBM Corporation
- *
- * iSeries specific routines for PCI.
- *
- * Based on code from pci.c and iSeries_pci.c 32bit
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/string.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/ide.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/prom.h>
-#include <asm/machdep.h>
-#include <asm/pci-bridge.h>
-#include <asm/ppcdebug.h>
-#include <asm/iommu.h>
-
-#include <asm/iSeries/HvCallPci.h>
-#include <asm/iSeries/HvCallXm.h>
-#include <asm/iSeries/iSeries_irq.h>
-#include <asm/iSeries/iSeries_pci.h>
-#include <asm/iSeries/mf.h>
-
-#include "pci.h"
-
-extern unsigned long io_page_mask;
-
-/*
- * Forward declares of prototypes.
- */
-static struct iSeries_Device_Node *find_Device_Node(int bus, int devfn);
-static void scan_PHB_slots(struct pci_controller *Phb);
-static void scan_EADS_bridge(HvBusNumber Bus, HvSubBusNumber SubBus, int IdSel);
-static int scan_bridge_slot(HvBusNumber Bus, struct HvCallPci_BridgeInfo *Info);
-
-LIST_HEAD(iSeries_Global_Device_List);
-
-static int DeviceCount;
-
-/* Counters and control flags. */
-static long Pci_Io_Read_Count;
-static long Pci_Io_Write_Count;
-#if 0
-static long Pci_Cfg_Read_Count;
-static long Pci_Cfg_Write_Count;
-#endif
-static long Pci_Error_Count;
-
-static int Pci_Retry_Max = 3; /* Only retry 3 times */
-static int Pci_Error_Flag = 1; /* Set Retry Error on. */
-
-static struct pci_ops iSeries_pci_ops;
-
-/*
- * Table defines
- * Each Entry size is 4 MB * 1024 Entries = 4GB I/O address space.
- */
-#define IOMM_TABLE_MAX_ENTRIES 1024
-#define IOMM_TABLE_ENTRY_SIZE 0x0000000000400000UL
-#define BASE_IO_MEMORY 0xE000000000000000UL
-
-static unsigned long max_io_memory = 0xE000000000000000UL;
-static long current_iomm_table_entry;
-
-/*
- * Lookup Tables.
- */
-static struct iSeries_Device_Node **iomm_table;
-static u8 *iobar_table;
-
-/*
- * Static and Global variables
- */
-static char *pci_io_text = "iSeries PCI I/O";
-static DEFINE_SPINLOCK(iomm_table_lock);
-
-/*
- * iomm_table_initialize
- *
- * Allocates and initalizes the Address Translation Table and Bar
- * Tables to get them ready for use. Must be called before any
- * I/O space is handed out to the device BARs.
- */
-static void iomm_table_initialize(void)
-{
- spin_lock(&iomm_table_lock);
- iomm_table = kmalloc(sizeof(*iomm_table) * IOMM_TABLE_MAX_ENTRIES,
- GFP_KERNEL);
- iobar_table = kmalloc(sizeof(*iobar_table) * IOMM_TABLE_MAX_ENTRIES,
- GFP_KERNEL);
- spin_unlock(&iomm_table_lock);
- if ((iomm_table == NULL) || (iobar_table == NULL))
- panic("PCI: I/O tables allocation failed.\n");
-}
-
-/*
- * iomm_table_allocate_entry
- *
- * Adds pci_dev entry in address translation table
- *
- * - Allocates the number of entries required in table base on BAR
- * size.
- * - Allocates starting at BASE_IO_MEMORY and increases.
- * - The size is round up to be a multiple of entry size.
- * - CurrentIndex is incremented to keep track of the last entry.
- * - Builds the resource entry for allocated BARs.
- */
-static void iomm_table_allocate_entry(struct pci_dev *dev, int bar_num)
-{
- struct resource *bar_res = &dev->resource[bar_num];
- long bar_size = pci_resource_len(dev, bar_num);
-
- /*
- * No space to allocate, quick exit, skip Allocation.
- */
- if (bar_size == 0)
- return;
- /*
- * Set Resource values.
- */
- spin_lock(&iomm_table_lock);
- bar_res->name = pci_io_text;
- bar_res->start =
- IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry;
- bar_res->start += BASE_IO_MEMORY;
- bar_res->end = bar_res->start + bar_size - 1;
- /*
- * Allocate the number of table entries needed for BAR.
- */
- while (bar_size > 0 ) {
- iomm_table[current_iomm_table_entry] = dev->sysdata;
- iobar_table[current_iomm_table_entry] = bar_num;
- bar_size -= IOMM_TABLE_ENTRY_SIZE;
- ++current_iomm_table_entry;
- }
- max_io_memory = BASE_IO_MEMORY +
- (IOMM_TABLE_ENTRY_SIZE * current_iomm_table_entry);
- spin_unlock(&iomm_table_lock);
-}
-
-/*
- * allocate_device_bars
- *
- * - Allocates ALL pci_dev BAR's and updates the resources with the
- * BAR value. BARS with zero length will have the resources
- * The HvCallPci_getBarParms is used to get the size of the BAR
- * space. It calls iomm_table_allocate_entry to allocate
- * each entry.
- * - Loops through The Bar resources(0 - 5) including the ROM
- * is resource(6).
- */
-static void allocate_device_bars(struct pci_dev *dev)
-{
- struct resource *bar_res;
- int bar_num;
-
- for (bar_num = 0; bar_num <= PCI_ROM_RESOURCE; ++bar_num) {
- bar_res = &dev->resource[bar_num];
- iomm_table_allocate_entry(dev, bar_num);
- }
-}
-
-/*
- * Log error information to system console.
- * Filter out the device not there errors.
- * PCI: EADs Connect Failed 0x18.58.10 Rc: 0x00xx
- * PCI: Read Vendor Failed 0x18.58.10 Rc: 0x00xx
- * PCI: Connect Bus Unit Failed 0x18.58.10 Rc: 0x00xx
- */
-static void pci_Log_Error(char *Error_Text, int Bus, int SubBus,
- int AgentId, int HvRc)
-{
- if (HvRc == 0x0302)
- return;
- printk(KERN_ERR "PCI: %s Failed: 0x%02X.%02X.%02X Rc: 0x%04X",
- Error_Text, Bus, SubBus, AgentId, HvRc);
-}
-
-/*
- * build_device_node(u16 Bus, int SubBus, u8 DevFn)
- */
-static struct iSeries_Device_Node *build_device_node(HvBusNumber Bus,
- HvSubBusNumber SubBus, int AgentId, int Function)
-{
- struct iSeries_Device_Node *node;
-
- PPCDBG(PPCDBG_BUSWALK,
- "-build_device_node 0x%02X.%02X.%02X Function: %02X\n",
- Bus, SubBus, AgentId, Function);
-
- node = kmalloc(sizeof(struct iSeries_Device_Node), GFP_KERNEL);
- if (node == NULL)
- return NULL;
-
- memset(node, 0, sizeof(struct iSeries_Device_Node));
- list_add_tail(&node->Device_List, &iSeries_Global_Device_List);
-#if 0
- node->DsaAddr = ((u64)Bus << 48) + ((u64)SubBus << 40) + ((u64)0x10 << 32);
-#endif
- node->DsaAddr.DsaAddr = 0;
- node->DsaAddr.Dsa.busNumber = Bus;
- node->DsaAddr.Dsa.subBusNumber = SubBus;
- node->DsaAddr.Dsa.deviceId = 0x10;
- node->DevFn = PCI_DEVFN(ISERIES_ENCODE_DEVICE(AgentId), Function);
- return node;
-}
-
-/*
- * unsigned long __init find_and_init_phbs(void)
- *
- * Description:
- * This function checks for all possible system PCI host bridges that connect
- * PCI buses. The system hypervisor is queried as to the guest partition
- * ownership status. A pci_controller is built for any bus which is partially
- * owned or fully owned by this guest partition.
- */
-unsigned long __init find_and_init_phbs(void)
-{
- struct pci_controller *phb;
- HvBusNumber bus;
-
- PPCDBG(PPCDBG_BUSWALK, "find_and_init_phbs Entry\n");
-
- /* Check all possible buses. */
- for (bus = 0; bus < 256; bus++) {
- int ret = HvCallXm_testBus(bus);
- if (ret == 0) {
- printk("bus %d appears to exist\n", bus);
-
- phb = (struct pci_controller *)kmalloc(sizeof(struct pci_controller), GFP_KERNEL);
- if (phb == NULL)
- return -ENOMEM;
- pci_setup_pci_controller(phb);
-
- phb->pci_mem_offset = phb->local_number = bus;
- phb->first_busno = bus;
- phb->last_busno = bus;
- phb->ops = &iSeries_pci_ops;
-
- PPCDBG(PPCDBG_BUSWALK, "PCI:Create iSeries pci_controller(%p), Bus: %04X\n",
- phb, bus);
-
- /* Find and connect the devices. */
- scan_PHB_slots(phb);
- }
- /*
- * Check for Unexpected Return code, a clue that something
- * has gone wrong.
- */
- else if (ret != 0x0301)
- printk(KERN_ERR "Unexpected Return on Probe(0x%04X): 0x%04X",
- bus, ret);
- }
- return 0;
-}
-
-/*
- * iSeries_pcibios_init
- *
- * Chance to initialize and structures or variable before PCI Bus walk.
- */
-void iSeries_pcibios_init(void)
-{
- PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Entry.\n");
- iomm_table_initialize();
- find_and_init_phbs();
- io_page_mask = -1;
- PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_init Exit.\n");
-}
-
-/*
- * iSeries_pci_final_fixup(void)
- */
-void __init iSeries_pci_final_fixup(void)
-{
- struct pci_dev *pdev = NULL;
- struct iSeries_Device_Node *node;
- int DeviceCount = 0;
-
- PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup Entry.\n");
-
- /* Fix up at the device node and pci_dev relationship */
- mf_display_src(0xC9000100);
-
- printk("pcibios_final_fixup\n");
- for_each_pci_dev(pdev) {
- node = find_Device_Node(pdev->bus->number, pdev->devfn);
- printk("pci dev %p (%x.%x), node %p\n", pdev,
- pdev->bus->number, pdev->devfn, node);
-
- if (node != NULL) {
- ++DeviceCount;
- pdev->sysdata = (void *)node;
- node->PciDev = pdev;
- PPCDBG(PPCDBG_BUSWALK,
- "pdev 0x%p <==> DevNode 0x%p\n",
- pdev, node);
- allocate_device_bars(pdev);
- iSeries_Device_Information(pdev, DeviceCount);
- iommu_devnode_init_iSeries(node);
- } else
- printk("PCI: Device Tree not found for 0x%016lX\n",
- (unsigned long)pdev);
- pdev->irq = node->Irq;
- }
- iSeries_activate_IRQs();
- mf_display_src(0xC9000200);
-}
-
-void pcibios_fixup_bus(struct pci_bus *PciBus)
-{
- PPCDBG(PPCDBG_BUSWALK, "iSeries_pcibios_fixup_bus(0x%04X) Entry.\n",
- PciBus->number);
-}
-
-void pcibios_fixup_resources(struct pci_dev *pdev)
-{
- PPCDBG(PPCDBG_BUSWALK, "fixup_resources pdev %p\n", pdev);
-}
-
-/*
- * Loop through each node function to find usable EADs bridges.
- */
-static void scan_PHB_slots(struct pci_controller *Phb)
-{
- struct HvCallPci_DeviceInfo *DevInfo;
- HvBusNumber bus = Phb->local_number; /* System Bus */
- const HvSubBusNumber SubBus = 0; /* EADs is always 0. */
- int HvRc = 0;
- int IdSel;
- const int MaxAgents = 8;
-
- DevInfo = (struct HvCallPci_DeviceInfo*)
- kmalloc(sizeof(struct HvCallPci_DeviceInfo), GFP_KERNEL);
- if (DevInfo == NULL)
- return;
-
- /*
- * Probe for EADs Bridges
- */
- for (IdSel = 1; IdSel < MaxAgents; ++IdSel) {
- HvRc = HvCallPci_getDeviceInfo(bus, SubBus, IdSel,
- ISERIES_HV_ADDR(DevInfo),
- sizeof(struct HvCallPci_DeviceInfo));
- if (HvRc == 0) {
- if (DevInfo->deviceType == HvCallPci_NodeDevice)
- scan_EADS_bridge(bus, SubBus, IdSel);
- else
- printk("PCI: Invalid System Configuration(0x%02X)"
- " for bus 0x%02x id 0x%02x.\n",
- DevInfo->deviceType, bus, IdSel);
- }
- else
- pci_Log_Error("getDeviceInfo", bus, SubBus, IdSel, HvRc);
- }
- kfree(DevInfo);
-}
-
-static void scan_EADS_bridge(HvBusNumber bus, HvSubBusNumber SubBus,
- int IdSel)
-{
- struct HvCallPci_BridgeInfo *BridgeInfo;
- HvAgentId AgentId;
- int Function;
- int HvRc;
-
- BridgeInfo = (struct HvCallPci_BridgeInfo *)
- kmalloc(sizeof(struct HvCallPci_BridgeInfo), GFP_KERNEL);
- if (BridgeInfo == NULL)
- return;
-
- /* Note: hvSubBus and irq is always be 0 at this level! */
- for (Function = 0; Function < 8; ++Function) {
- AgentId = ISERIES_PCI_AGENTID(IdSel, Function);
- HvRc = HvCallXm_connectBusUnit(bus, SubBus, AgentId, 0);
- if (HvRc == 0) {
- printk("found device at bus %d idsel %d func %d (AgentId %x)\n",
- bus, IdSel, Function, AgentId);
- /* Connect EADs: 0x18.00.12 = 0x00 */
- PPCDBG(PPCDBG_BUSWALK,
- "PCI:Connect EADs: 0x%02X.%02X.%02X\n",
- bus, SubBus, AgentId);
- HvRc = HvCallPci_getBusUnitInfo(bus, SubBus, AgentId,
- ISERIES_HV_ADDR(BridgeInfo),
- sizeof(struct HvCallPci_BridgeInfo));
- if (HvRc == 0) {
- printk("bridge info: type %x subbus %x maxAgents %x maxsubbus %x logslot %x\n",
- BridgeInfo->busUnitInfo.deviceType,
- BridgeInfo->subBusNumber,
- BridgeInfo->maxAgents,
- BridgeInfo->maxSubBusNumber,
- BridgeInfo->logicalSlotNumber);
- PPCDBG(PPCDBG_BUSWALK,
- "PCI: BridgeInfo, Type:0x%02X, SubBus:0x%02X, MaxAgents:0x%02X, MaxSubBus: 0x%02X, LSlot: 0x%02X\n",
- BridgeInfo->busUnitInfo.deviceType,
- BridgeInfo->subBusNumber,
- BridgeInfo->maxAgents,
- BridgeInfo->maxSubBusNumber,
- BridgeInfo->logicalSlotNumber);
-
- if (BridgeInfo->busUnitInfo.deviceType ==
- HvCallPci_BridgeDevice) {
- /* Scan_Bridge_Slot...: 0x18.00.12 */
- scan_bridge_slot(bus, BridgeInfo);
- } else
- printk("PCI: Invalid Bridge Configuration(0x%02X)",
- BridgeInfo->busUnitInfo.deviceType);
- }
- } else if (HvRc != 0x000B)
- pci_Log_Error("EADs Connect",
- bus, SubBus, AgentId, HvRc);
- }
- kfree(BridgeInfo);
-}
-
-/*
- * This assumes that the node slot is always on the primary bus!
- */
-static int scan_bridge_slot(HvBusNumber Bus,
- struct HvCallPci_BridgeInfo *BridgeInfo)
-{
- struct iSeries_Device_Node *node;
- HvSubBusNumber SubBus = BridgeInfo->subBusNumber;
- u16 VendorId = 0;
- int HvRc = 0;
- u8 Irq = 0;
- int IdSel = ISERIES_GET_DEVICE_FROM_SUBBUS(SubBus);
- int Function = ISERIES_GET_FUNCTION_FROM_SUBBUS(SubBus);
- HvAgentId EADsIdSel = ISERIES_PCI_AGENTID(IdSel, Function);
-
- /* iSeries_allocate_IRQ.: 0x18.00.12(0xA3) */
- Irq = iSeries_allocate_IRQ(Bus, 0, EADsIdSel);
- PPCDBG(PPCDBG_BUSWALK,
- "PCI:- allocate and assign IRQ 0x%02X.%02X.%02X = 0x%02X\n",
- Bus, 0, EADsIdSel, Irq);
-
- /*
- * Connect all functions of any device found.
- */
- for (IdSel = 1; IdSel <= BridgeInfo->maxAgents; ++IdSel) {
- for (Function = 0; Function < 8; ++Function) {
- HvAgentId AgentId = ISERIES_PCI_AGENTID(IdSel, Function);
- HvRc = HvCallXm_connectBusUnit(Bus, SubBus,
- AgentId, Irq);
- if (HvRc != 0) {
- pci_Log_Error("Connect Bus Unit",
- Bus, SubBus, AgentId, HvRc);
- continue;
- }
-
- HvRc = HvCallPci_configLoad16(Bus, SubBus, AgentId,
- PCI_VENDOR_ID, &VendorId);
- if (HvRc != 0) {
- pci_Log_Error("Read Vendor",
- Bus, SubBus, AgentId, HvRc);
- continue;
- }
- printk("read vendor ID: %x\n", VendorId);
-
- /* FoundDevice: 0x18.28.10 = 0x12AE */
- PPCDBG(PPCDBG_BUSWALK,
- "PCI:- FoundDevice: 0x%02X.%02X.%02X = 0x%04X, irq %d\n",
- Bus, SubBus, AgentId, VendorId, Irq);
- HvRc = HvCallPci_configStore8(Bus, SubBus, AgentId,
- PCI_INTERRUPT_LINE, Irq);
- if (HvRc != 0)
- pci_Log_Error("PciCfgStore Irq Failed!",
- Bus, SubBus, AgentId, HvRc);
-
- ++DeviceCount;
- node = build_device_node(Bus, SubBus, EADsIdSel, Function);
- node->Irq = Irq;
- node->LogicalSlot = BridgeInfo->logicalSlotNumber;
-
- } /* for (Function = 0; Function < 8; ++Function) */
- } /* for (IdSel = 1; IdSel <= MaxAgents; ++IdSel) */
- return HvRc;
-}
-
-/*
- * I/0 Memory copy MUST use mmio commands on iSeries
- * To do; For performance, include the hv call directly
- */
-void iSeries_memset_io(volatile void __iomem *dest, char c, size_t Count)
-{
- u8 ByteValue = c;
- long NumberOfBytes = Count;
-
- while (NumberOfBytes > 0) {
- iSeries_Write_Byte(ByteValue, dest++);
- -- NumberOfBytes;
- }
-}
-EXPORT_SYMBOL(iSeries_memset_io);
-
-void iSeries_memcpy_toio(volatile void __iomem *dest, void *source, size_t count)
-{
- char *src = source;
- long NumberOfBytes = count;
-
- while (NumberOfBytes > 0) {
- iSeries_Write_Byte(*src++, dest++);
- -- NumberOfBytes;
- }
-}
-EXPORT_SYMBOL(iSeries_memcpy_toio);
-
-void iSeries_memcpy_fromio(void *dest, const volatile void __iomem *src, size_t count)
-{
- char *dst = dest;
- long NumberOfBytes = count;
-
- while (NumberOfBytes > 0) {
- *dst++ = iSeries_Read_Byte(src++);
- -- NumberOfBytes;
- }
-}
-EXPORT_SYMBOL(iSeries_memcpy_fromio);
-
-/*
- * Look down the chain to find the matching Device Device
- */
-static struct iSeries_Device_Node *find_Device_Node(int bus, int devfn)
-{
- struct list_head *pos;
-
- list_for_each(pos, &iSeries_Global_Device_List) {
- struct iSeries_Device_Node *node =
- list_entry(pos, struct iSeries_Device_Node, Device_List);
-
- if ((bus == ISERIES_BUS(node)) && (devfn == node->DevFn))
- return node;
- }
- return NULL;
-}
-
-#if 0
-/*
- * Returns the device node for the passed pci_dev
- * Sanity Check Node PciDev to passed pci_dev
- * If none is found, returns a NULL which the client must handle.
- */
-static struct iSeries_Device_Node *get_Device_Node(struct pci_dev *pdev)
-{
- struct iSeries_Device_Node *node;
-
- node = pdev->sysdata;
- if (node == NULL || node->PciDev != pdev)
- node = find_Device_Node(pdev->bus->number, pdev->devfn);
- return node;
-}
-#endif
-
-/*
- * Config space read and write functions.
- * For now at least, we look for the device node for the bus and devfn
- * that we are asked to access. It may be possible to translate the devfn
- * to a subbus and deviceid more directly.
- */
-static u64 hv_cfg_read_func[4] = {
- HvCallPciConfigLoad8, HvCallPciConfigLoad16,
- HvCallPciConfigLoad32, HvCallPciConfigLoad32
-};
-
-static u64 hv_cfg_write_func[4] = {
- HvCallPciConfigStore8, HvCallPciConfigStore16,
- HvCallPciConfigStore32, HvCallPciConfigStore32
-};
-
-/*
- * Read PCI config space
- */
-static int iSeries_pci_read_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int size, u32 *val)
-{
- struct iSeries_Device_Node *node = find_Device_Node(bus->number, devfn);
- u64 fn;
- struct HvCallPci_LoadReturn ret;
-
- if (node == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
- if (offset > 255) {
- *val = ~0;
- return PCIBIOS_BAD_REGISTER_NUMBER;
- }
-
- fn = hv_cfg_read_func[(size - 1) & 3];
- HvCall3Ret16(fn, &ret, node->DsaAddr.DsaAddr, offset, 0);
-
- if (ret.rc != 0) {
- *val = ~0;
- return PCIBIOS_DEVICE_NOT_FOUND; /* or something */
- }
-
- *val = ret.value;
- return 0;
-}
-
-/*
- * Write PCI config space
- */
-
-static int iSeries_pci_write_config(struct pci_bus *bus, unsigned int devfn,
- int offset, int size, u32 val)
-{
- struct iSeries_Device_Node *node = find_Device_Node(bus->number, devfn);
- u64 fn;
- u64 ret;
-
- if (node == NULL)
- return PCIBIOS_DEVICE_NOT_FOUND;
- if (offset > 255)
- return PCIBIOS_BAD_REGISTER_NUMBER;
-
- fn = hv_cfg_write_func[(size - 1) & 3];
- ret = HvCall4(fn, node->DsaAddr.DsaAddr, offset, val, 0);
-
- if (ret != 0)
- return PCIBIOS_DEVICE_NOT_FOUND;
-
- return 0;
-}
-
-static struct pci_ops iSeries_pci_ops = {
- .read = iSeries_pci_read_config,
- .write = iSeries_pci_write_config
-};
-
-/*
- * Check Return Code
- * -> On Failure, print and log information.
- * Increment Retry Count, if exceeds max, panic partition.
- *
- * PCI: Device 23.90 ReadL I/O Error( 0): 0x1234
- * PCI: Device 23.90 ReadL Retry( 1)
- * PCI: Device 23.90 ReadL Retry Successful(1)
- */
-static int CheckReturnCode(char *TextHdr, struct iSeries_Device_Node *DevNode,
- int *retry, u64 ret)
-{
- if (ret != 0) {
- ++Pci_Error_Count;
- (*retry)++;
- printk("PCI: %s: Device 0x%04X:%02X I/O Error(%2d): 0x%04X\n",
- TextHdr, DevNode->DsaAddr.Dsa.busNumber, DevNode->DevFn,
- *retry, (int)ret);
- /*
- * Bump the retry and check for retry count exceeded.
- * If, Exceeded, panic the system.
- */
- if (((*retry) > Pci_Retry_Max) &&
- (Pci_Error_Flag > 0)) {
- mf_display_src(0xB6000103);
- panic_timeout = 0;
- panic("PCI: Hardware I/O Error, SRC B6000103, "
- "Automatic Reboot Disabled.\n");
- }
- return -1; /* Retry Try */
- }
- return 0;
-}
-
-/*
- * Translate the I/O Address into a device node, bar, and bar offset.
- * Note: Make sure the passed variable end up on the stack to avoid
- * the exposure of being device global.
- */
-static inline struct iSeries_Device_Node *xlate_iomm_address(
- const volatile void __iomem *IoAddress,
- u64 *dsaptr, u64 *BarOffsetPtr)
-{
- unsigned long OrigIoAddr;
- unsigned long BaseIoAddr;
- unsigned long TableIndex;
- struct iSeries_Device_Node *DevNode;
-
- OrigIoAddr = (unsigned long __force)IoAddress;
- if ((OrigIoAddr < BASE_IO_MEMORY) || (OrigIoAddr >= max_io_memory))
- return NULL;
- BaseIoAddr = OrigIoAddr - BASE_IO_MEMORY;
- TableIndex = BaseIoAddr / IOMM_TABLE_ENTRY_SIZE;
- DevNode = iomm_table[TableIndex];
-
- if (DevNode != NULL) {
- int barnum = iobar_table[TableIndex];
- *dsaptr = DevNode->DsaAddr.DsaAddr | (barnum << 24);
- *BarOffsetPtr = BaseIoAddr % IOMM_TABLE_ENTRY_SIZE;
- } else
- panic("PCI: Invalid PCI IoAddress detected!\n");
- return DevNode;
-}
-
-/*
- * Read MM I/O Instructions for the iSeries
- * On MM I/O error, all ones are returned and iSeries_pci_IoError is cal
- * else, data is returned in big Endian format.
- *
- * iSeries_Read_Byte = Read Byte ( 8 bit)
- * iSeries_Read_Word = Read Word (16 bit)
- * iSeries_Read_Long = Read Long (32 bit)
- */
-u8 iSeries_Read_Byte(const volatile void __iomem *IoAddress)
-{
- u64 BarOffset;
- u64 dsa;
- int retry = 0;
- struct HvCallPci_LoadReturn ret;
- struct iSeries_Device_Node *DevNode =
- xlate_iomm_address(IoAddress, &dsa, &BarOffset);
-
- if (DevNode == NULL) {
- static unsigned long last_jiffies;
- static int num_printed;
-
- if ((jiffies - last_jiffies) > 60 * HZ) {
- last_jiffies = jiffies;
- num_printed = 0;
- }
- if (num_printed++ < 10)
- printk(KERN_ERR "iSeries_Read_Byte: invalid access at IO address %p\n", IoAddress);
- return 0xff;
- }
- do {
- ++Pci_Io_Read_Count;
- HvCall3Ret16(HvCallPciBarLoad8, &ret, dsa, BarOffset, 0);
- } while (CheckReturnCode("RDB", DevNode, &retry, ret.rc) != 0);
-
- return (u8)ret.value;
-}
-EXPORT_SYMBOL(iSeries_Read_Byte);
-
-u16 iSeries_Read_Word(const volatile void __iomem *IoAddress)
-{
- u64 BarOffset;
- u64 dsa;
- int retry = 0;
- struct HvCallPci_LoadReturn ret;
- struct iSeries_Device_Node *DevNode =
- xlate_iomm_address(IoAddress, &dsa, &BarOffset);
-
- if (DevNode == NULL) {
- static unsigned long last_jiffies;
- static int num_printed;
-
- if ((jiffies - last_jiffies) > 60 * HZ) {
- last_jiffies = jiffies;
- num_printed = 0;
- }
- if (num_printed++ < 10)
- printk(KERN_ERR "iSeries_Read_Word: invalid access at IO address %p\n", IoAddress);
- return 0xffff;
- }
- do {
- ++Pci_Io_Read_Count;
- HvCall3Ret16(HvCallPciBarLoad16, &ret, dsa,
- BarOffset, 0);
- } while (CheckReturnCode("RDW", DevNode, &retry, ret.rc) != 0);
-
- return swab16((u16)ret.value);
-}
-EXPORT_SYMBOL(iSeries_Read_Word);
-
-u32 iSeries_Read_Long(const volatile void __iomem *IoAddress)
-{
- u64 BarOffset;
- u64 dsa;
- int retry = 0;
- struct HvCallPci_LoadReturn ret;
- struct iSeries_Device_Node *DevNode =
- xlate_iomm_address(IoAddress, &dsa, &BarOffset);
-
- if (DevNode == NULL) {
- static unsigned long last_jiffies;
- static int num_printed;
-
- if ((jiffies - last_jiffies) > 60 * HZ) {
- last_jiffies = jiffies;
- num_printed = 0;
- }
- if (num_printed++ < 10)
- printk(KERN_ERR "iSeries_Read_Long: invalid access at IO address %p\n", IoAddress);
- return 0xffffffff;
- }
- do {
- ++Pci_Io_Read_Count;
- HvCall3Ret16(HvCallPciBarLoad32, &ret, dsa,
- BarOffset, 0);
- } while (CheckReturnCode("RDL", DevNode, &retry, ret.rc) != 0);
-
- return swab32((u32)ret.value);
-}
-EXPORT_SYMBOL(iSeries_Read_Long);
-
-/*
- * Write MM I/O Instructions for the iSeries
- *
- * iSeries_Write_Byte = Write Byte (8 bit)
- * iSeries_Write_Word = Write Word(16 bit)
- * iSeries_Write_Long = Write Long(32 bit)
- */
-void iSeries_Write_Byte(u8 data, volatile void __iomem *IoAddress)
-{
- u64 BarOffset;
- u64 dsa;
- int retry = 0;
- u64 rc;
- struct iSeries_Device_Node *DevNode =
- xlate_iomm_address(IoAddress, &dsa, &BarOffset);
-
- if (DevNode == NULL) {
- static unsigned long last_jiffies;
- static int num_printed;
-
- if ((jiffies - last_jiffies) > 60 * HZ) {
- last_jiffies = jiffies;
- num_printed = 0;
- }
- if (num_printed++ < 10)
- printk(KERN_ERR "iSeries_Write_Byte: invalid access at IO address %p\n", IoAddress);
- return;
- }
- do {
- ++Pci_Io_Write_Count;
- rc = HvCall4(HvCallPciBarStore8, dsa, BarOffset, data, 0);
- } while (CheckReturnCode("WWB", DevNode, &retry, rc) != 0);
-}
-EXPORT_SYMBOL(iSeries_Write_Byte);
-
-void iSeries_Write_Word(u16 data, volatile void __iomem *IoAddress)
-{
- u64 BarOffset;
- u64 dsa;
- int retry = 0;
- u64 rc;
- struct iSeries_Device_Node *DevNode =
- xlate_iomm_address(IoAddress, &dsa, &BarOffset);
-
- if (DevNode == NULL) {
- static unsigned long last_jiffies;
- static int num_printed;
-
- if ((jiffies - last_jiffies) > 60 * HZ) {
- last_jiffies = jiffies;
- num_printed = 0;
- }
- if (num_printed++ < 10)
- printk(KERN_ERR "iSeries_Write_Word: invalid access at IO address %p\n", IoAddress);
- return;
- }
- do {
- ++Pci_Io_Write_Count;
- rc = HvCall4(HvCallPciBarStore16, dsa, BarOffset, swab16(data), 0);
- } while (CheckReturnCode("WWW", DevNode, &retry, rc) != 0);
-}
-EXPORT_SYMBOL(iSeries_Write_Word);
-
-void iSeries_Write_Long(u32 data, volatile void __iomem *IoAddress)
-{
- u64 BarOffset;
- u64 dsa;
- int retry = 0;
- u64 rc;
- struct iSeries_Device_Node *DevNode =
- xlate_iomm_address(IoAddress, &dsa, &BarOffset);
-
- if (DevNode == NULL) {
- static unsigned long last_jiffies;
- static int num_printed;
-
- if ((jiffies - last_jiffies) > 60 * HZ) {
- last_jiffies = jiffies;
- num_printed = 0;
- }
- if (num_printed++ < 10)
- printk(KERN_ERR "iSeries_Write_Long: invalid access at IO address %p\n", IoAddress);
- return;
- }
- do {
- ++Pci_Io_Write_Count;
- rc = HvCall4(HvCallPciBarStore32, dsa, BarOffset, swab32(data), 0);
- } while (CheckReturnCode("WWL", DevNode, &retry, rc) != 0);
-}
-EXPORT_SYMBOL(iSeries_Write_Long);
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
#include <asm/iommu.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
#ifdef DEBUG
#define DBG(x...) printk(x)
#include <asm/systemcfg.h>
#include <asm/firmware.h>
#include <asm/tce.h>
-#include "pci.h"
+#include <asm/ppc-pci.h>
#define DBG(fmt...)
#include <asm/pci-bridge.h>
#include <asm/prom.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
static int __initdata s7a_workaround = -1;
#include <asm/firmware.h>
#include <asm/pmc.h>
#include <asm/mpic.h>
+#include <asm/ppc-pci.h>
#include "i8259.h"
-#include "pci.h"
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#include <asm/irq.h>
#include <asm/machdep.h>
#include <asm/udbg.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
+++ /dev/null
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-#ifndef __PPC_KERNEL_PCI_H__
-#define __PPC_KERNEL_PCI_H__
-
-#include <linux/pci.h>
-#include <asm/pci-bridge.h>
-
-extern unsigned long isa_io_base;
-
-extern void pci_setup_pci_controller(struct pci_controller *hose);
-extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
-extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
-
-
-extern struct list_head hose_list;
-extern int global_phb_number;
-
-extern unsigned long find_and_init_phbs(void);
-
-extern struct pci_dev *ppc64_isabridge_dev; /* may be NULL if no ISA bus */
-
-/* PCI device_node operations */
-struct device_node;
-typedef void *(*traverse_func)(struct device_node *me, void *data);
-void *traverse_pci_devices(struct device_node *start, traverse_func pre,
- void *data);
-
-void pci_devs_phb_init(void);
-void pci_devs_phb_init_dynamic(struct pci_controller *phb);
-
-/* PCI address cache management routines */
-void pci_addr_cache_insert_device(struct pci_dev *dev);
-void pci_addr_cache_remove_device(struct pci_dev *dev);
-
-/* From rtas_pci.h */
-void init_pci_config_tokens (void);
-unsigned long get_phb_buid (struct device_node *);
-
-/* From pSeries_pci.h */
-extern void pSeries_final_fixup(void);
-extern void pSeries_irq_bus_setup(struct pci_bus *bus);
-
-extern unsigned long pci_probe_only;
-extern unsigned long pci_assign_all_buses;
-extern int pci_read_irq_line(struct pci_dev *pci_dev);
-
-#endif /* __PPC_KERNEL_PCI_H__ */
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/abs_addr.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
static void *pci_direct_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, unsigned int __nocast flag)
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#include <asm/pSeries_reconfig.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
/*
* Traverse_func that inits the PCI fields of the device node.
#include <asm/iommu.h>
#include <asm/pci-bridge.h>
#include <asm/machdep.h>
-#include "pci.h"
+#include <asm/ppc-pci.h>
#ifdef CONFIG_PPC_ISERIES
#include <asm/iSeries/iSeries_pci.h>
#include <asm/machdep.h>
#include <asm/pmac_feature.h>
#include <asm/iommu.h>
+#include <asm/ppc-pci.h>
-#include "pci.h"
#include "pmac.h"
#define DEBUG
#include <asm/iommu.h>
#include <asm/rtas.h>
#include <asm/mpic.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
/* RTAS tokens */
static int read_pci_config;
#include <asm/time.h>
#include <asm/mmu_context.h>
#include <asm/systemcfg.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
/* readdir & getdents */
#define NAME_OFFSET(de) ((int) ((de)->d_name - (char __user *) (de)))
#include <asm/cacheflush.h>
#include <asm/lmb.h>
#include <asm/dart.h>
-
-#include "pci.h"
+#include <asm/ppc-pci.h>
extern int iommu_force_on;
--- /dev/null
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_PPC_PCI_H
+#define _ASM_POWERPC_PPC_PCI_H
+
+#include <linux/pci.h>
+#include <asm/pci-bridge.h>
+
+extern unsigned long isa_io_base;
+
+extern void pci_setup_pci_controller(struct pci_controller *hose);
+extern void pci_setup_phb_io(struct pci_controller *hose, int primary);
+extern void pci_setup_phb_io_dynamic(struct pci_controller *hose, int primary);
+
+
+extern struct list_head hose_list;
+extern int global_phb_number;
+
+extern unsigned long find_and_init_phbs(void);
+
+extern struct pci_dev *ppc64_isabridge_dev; /* may be NULL if no ISA bus */
+
+/* PCI device_node operations */
+struct device_node;
+typedef void *(*traverse_func)(struct device_node *me, void *data);
+void *traverse_pci_devices(struct device_node *start, traverse_func pre,
+ void *data);
+
+void pci_devs_phb_init(void);
+void pci_devs_phb_init_dynamic(struct pci_controller *phb);
+
+/* PCI address cache management routines */
+void pci_addr_cache_insert_device(struct pci_dev *dev);
+void pci_addr_cache_remove_device(struct pci_dev *dev);
+
+/* From rtas_pci.h */
+void init_pci_config_tokens (void);
+unsigned long get_phb_buid (struct device_node *);
+
+/* From pSeries_pci.h */
+extern void pSeries_final_fixup(void);
+extern void pSeries_irq_bus_setup(struct pci_bus *bus);
+
+extern unsigned long pci_probe_only;
+extern unsigned long pci_assign_all_buses;
+extern int pci_read_irq_line(struct pci_dev *pci_dev);
+
+#endif /* _ASM_POWERPC_PPC_PCI_H */
projects / ~shefty / rdma-dev.git / commitdiff