]> git.openfabrics.org - ~emulex/infiniband.git/commitdiff
mfd: Add basic device tree binding for wm8994
authorMark Brown <broonie@opensource.wolfsonmicro.com>
Tue, 22 Nov 2011 18:22:29 +0000 (18:22 +0000)
committerMark Brown <broonie@opensource.wolfsonmicro.com>
Mon, 12 Dec 2011 16:09:11 +0000 (00:09 +0800)
Add a placeholder device tree binding for the wm8994 driver. At present
the binding is essentially null as none of the platform data is supported,
and at least some of that will depend on the pending regulator bindings.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>
Documentation/devicetree/bindings/sound/wm8994.txt [new file with mode: 0644]
drivers/mfd/wm8994-core.c

diff --git a/Documentation/devicetree/bindings/sound/wm8994.txt b/Documentation/devicetree/bindings/sound/wm8994.txt
new file mode 100644 (file)
index 0000000..7a7eb1e
--- /dev/null
@@ -0,0 +1,18 @@
+WM1811/WM8994/WM8958 audio CODEC
+
+These devices support both I2C and SPI (configured with pin strapping
+on the board).
+
+Required properties:
+
+  - compatible : "wlf,wm1811", "wlf,wm8994", "wlf,wm8958"
+
+  - reg : the I2C address of the device for I2C, the chip select
+          number for SPI.
+
+Example:
+
+codec: wm8994@1a {
+       compatible = "wlf,wm8994";
+       reg = <0x1a>;
+};
index 5d6ba132837e8efb5f470d48784d5bb5f9809509..74d4746086c689963fe73420b757188f32006f67 100644 (file)
@@ -581,6 +581,14 @@ static void wm8994_device_exit(struct wm8994 *wm8994)
        kfree(wm8994);
 }
 
+static const struct of_device_id wm8994_of_match[] = {
+       { .compatible = "wlf,wm1811", },
+       { .compatible = "wlf,wm8994", },
+       { .compatible = "wlf,wm8958", },
+       { }
+};
+MODULE_DEVICE_TABLE(of, wm8994_of_match);
+
 static int wm8994_i2c_probe(struct i2c_client *i2c,
                            const struct i2c_device_id *id)
 {
@@ -633,6 +641,7 @@ static struct i2c_driver wm8994_i2c_driver = {
                .name = "wm8994",
                .owner = THIS_MODULE,
                .pm = &wm8994_pm_ops,
+               .of_match_table = wm8994_of_match,
        },
        .probe = wm8994_i2c_probe,
        .remove = wm8994_i2c_remove,