LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
-core-y += arch/sh/kernel/ arch/sh/mm/
+core-y += arch/sh/kernel/ arch/sh/mm/ arch/sh/boards/
core-$(CONFIG_SH_FPU_EMU) += arch/sh/math-emu/
-# Boards and Mach groups
+# Mach groups
machdir-$(CONFIG_SOLUTION_ENGINE) += mach-se
machdir-$(CONFIG_SH_HP6XX) += mach-hp6xx
machdir-$(CONFIG_SH_DREAMCAST) += mach-dreamcast
machdir-$(CONFIG_SH_SDK7780) += mach-sdk7780
machdir-$(CONFIG_SH_X3PROTO) += mach-x3proto
machdir-$(CONFIG_SH_RSK7203) += mach-rsk7203
-machdir-$(CONFIG_SH_AP325RXA) += mach-ap325rxa
machdir-$(CONFIG_SH_SH7763RDP) += mach-sh7763rdp
-machdir-$(CONFIG_SH_SH7785LCR) += mach-sh7785lcr
machdir-$(CONFIG_SH_SH4202_MICRODEV) += mach-microdev
machdir-$(CONFIG_SH_LANDISK) += mach-landisk
machdir-$(CONFIG_SH_TITAN) += mach-titan
-machdir-$(CONFIG_SH_SHMIN) += mach-shmin
machdir-$(CONFIG_SH_LBOX_RE2) += mach-lboxre2
-machdir-$(CONFIG_SH_MAGIC_PANEL_R2) += mach-magicpanelr2
machdir-$(CONFIG_SH_CAYMAN) += mach-cayman
ifneq ($(machdir-y),)
source "arch/sh/boards/mach-highlander/Kconfig"
source "arch/sh/boards/mach-sdk7780/Kconfig"
source "arch/sh/boards/mach-migor/Kconfig"
-source "arch/sh/boards/mach-magicpanelr2/Kconfig"
+
+if SH_MAGIC_PANEL_R2
+
+menu "Magic Panel R2 options"
+
+config SH_MAGIC_PANEL_R2_VERSION
+ int SH_MAGIC_PANEL_R2_VERSION
+ default "3"
+ help
+ Set the version of the Magic Panel R2
+
+endmenu
+
+endif
--- /dev/null
+#
+# Specific board support, not covered by a mach group.
+#
+obj-$(CONFIG_SH_AP325RXA) += board-ap325rxa.o
+obj-$(CONFIG_SH_MAGIC_PANEL_R2) += board-magicpanelr2.o
+obj-$(CONFIG_SH_RSK7203) += board-rsk7203.o
+obj-$(CONFIG_SH_SH7785LCR) += board-sh7785lcr.o
+obj-$(CONFIG_SH_SHMIN) += board-shmin..o
--- /dev/null
+/*
+ * Renesas - AP-325RXA
+ * (Compatible with Algo System ., LTD. - AP-320A)
+ *
+ * Copyright (C) 2008 Renesas Solutions Corp.
+ * Author : Yusuke Goda <goda.yuske@renesas.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/smc911x.h>
+#include <media/soc_camera_platform.h>
+#include <media/sh_mobile_ceu.h>
+#include <asm/sh_mobile_lcdc.h>
+#include <asm/io.h>
+#include <asm/clock.h>
+
+static struct smc911x_platdata smc911x_info = {
+ .flags = SMC911X_USE_32BIT,
+ .irq_flags = IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc9118_resources[] = {
+ [0] = {
+ .start = 0xb6080000,
+ .end = 0xb60fffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 35,
+ .end = 35,
+ .flags = IORESOURCE_IRQ,
+ }
+};
+
+static struct platform_device smc9118_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc9118_resources),
+ .resource = smc9118_resources,
+ .dev = {
+ .platform_data = &smc911x_info,
+ },
+};
+
+static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
+ {
+ .name = "uboot",
+ .offset = 0,
+ .size = (1 * 1024 * 1024),
+ .mask_flags = MTD_WRITEABLE, /* Read-only */
+ }, {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = (2 * 1024 * 1024),
+ }, {
+ .name = "other",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data ap325rxa_nor_flash_data = {
+ .width = 2,
+ .parts = ap325rxa_nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions),
+};
+
+static struct resource ap325rxa_nor_flash_resources[] = {
+ [0] = {
+ .name = "NOR Flash",
+ .start = 0x00000000,
+ .end = 0x00ffffff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device ap325rxa_nor_flash_device = {
+ .name = "physmap-flash",
+ .resource = ap325rxa_nor_flash_resources,
+ .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources),
+ .dev = {
+ .platform_data = &ap325rxa_nor_flash_data,
+ },
+};
+
+#define FPGA_LCDREG 0xB4100180
+#define FPGA_BKLREG 0xB4100212
+#define FPGA_LCDREG_VAL 0x0018
+#define PORT_PHCR 0xA405010E
+#define PORT_PLCR 0xA4050114
+#define PORT_PMCR 0xA4050116
+#define PORT_PRCR 0xA405011C
+#define PORT_PSCR 0xA405011E
+#define PORT_PZCR 0xA405014C
+#define PORT_HIZCRA 0xA4050158
+#define PORT_MSELCRB 0xA4050182
+#define PORT_PSDR 0xA405013E
+#define PORT_PZDR 0xA405016C
+#define PORT_PSELD 0xA4050154
+
+static void ap320_wvga_power_on(void *board_data)
+{
+ msleep(100);
+
+ /* ASD AP-320/325 LCD ON */
+ ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
+
+ /* backlight */
+ ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
+ ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
+ ctrl_outw(0x100, FPGA_BKLREG);
+}
+
+static struct sh_mobile_lcdc_info lcdc_info = {
+ .clock_source = LCDC_CLK_EXTERNAL,
+ .ch[0] = {
+ .chan = LCDC_CHAN_MAINLCD,
+ .bpp = 16,
+ .interface_type = RGB18,
+ .clock_divider = 1,
+ .lcd_cfg = {
+ .name = "LB070WV1",
+ .xres = 800,
+ .yres = 480,
+ .left_margin = 40,
+ .right_margin = 160,
+ .hsync_len = 8,
+ .upper_margin = 63,
+ .lower_margin = 80,
+ .vsync_len = 1,
+ .sync = 0, /* hsync and vsync are active low */
+ },
+ .board_cfg = {
+ .display_on = ap320_wvga_power_on,
+ },
+ }
+};
+
+static struct resource lcdc_resources[] = {
+ [0] = {
+ .name = "LCDC",
+ .start = 0xfe940000, /* P4-only space */
+ .end = 0xfe941fff,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device lcdc_device = {
+ .name = "sh_mobile_lcdc_fb",
+ .num_resources = ARRAY_SIZE(lcdc_resources),
+ .resource = lcdc_resources,
+ .dev = {
+ .platform_data = &lcdc_info,
+ },
+};
+
+#ifdef CONFIG_I2C
+static unsigned char camera_ncm03j_magic[] =
+{
+ 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
+ 0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
+ 0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
+ 0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
+ 0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
+ 0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
+ 0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
+ 0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
+ 0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
+ 0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
+ 0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
+ 0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
+ 0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
+ 0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
+ 0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
+ 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
+};
+
+static int camera_set_capture(struct soc_camera_platform_info *info,
+ int enable)
+{
+ struct i2c_adapter *a = i2c_get_adapter(0);
+ struct i2c_msg msg;
+ int ret = 0;
+ int i;
+
+ if (!enable)
+ return 0; /* no disable for now */
+
+ for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
+ u_int8_t buf[8];
+
+ msg.addr = 0x6e;
+ msg.buf = buf;
+ msg.len = 2;
+ msg.flags = 0;
+
+ buf[0] = camera_ncm03j_magic[i];
+ buf[1] = camera_ncm03j_magic[i + 1];
+
+ ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
+ }
+
+ return ret;
+}
+
+static struct soc_camera_platform_info camera_info = {
+ .iface = 0,
+ .format_name = "UYVY",
+ .format_depth = 16,
+ .format = {
+ .pixelformat = V4L2_PIX_FMT_UYVY,
+ .colorspace = V4L2_COLORSPACE_SMPTE170M,
+ .width = 640,
+ .height = 480,
+ },
+ .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+ SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+ .set_capture = camera_set_capture,
+};
+
+static struct platform_device camera_device = {
+ .name = "soc_camera_platform",
+ .dev = {
+ .platform_data = &camera_info,
+ },
+};
+#endif /* CONFIG_I2C */
+
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+ .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
+ SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
+};
+
+static struct resource ceu_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 52,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device ceu_device = {
+ .name = "sh_mobile_ceu",
+ .num_resources = ARRAY_SIZE(ceu_resources),
+ .resource = ceu_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu_info,
+ },
+};
+
+static struct platform_device *ap325rxa_devices[] __initdata = {
+ &smc9118_device,
+ &ap325rxa_nor_flash_device,
+ &lcdc_device,
+ &ceu_device,
+#ifdef CONFIG_I2C
+ &camera_device,
+#endif
+};
+
+static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+};
+
+static int __init ap325rxa_devices_setup(void)
+{
+ clk_always_enable("mstp200"); /* LCDC */
+ clk_always_enable("mstp203"); /* CEU */
+
+ platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
+
+ i2c_register_board_info(0, ap325rxa_i2c_devices,
+ ARRAY_SIZE(ap325rxa_i2c_devices));
+
+ return platform_add_devices(ap325rxa_devices,
+ ARRAY_SIZE(ap325rxa_devices));
+}
+device_initcall(ap325rxa_devices_setup);
+
+static void __init ap325rxa_setup(char **cmdline_p)
+{
+ /* LCDC configuration */
+ ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
+ ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
+ ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
+ ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
+ ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
+
+ /* CEU */
+ ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
+ ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
+ ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
+ ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
+}
+
+static struct sh_machine_vector mv_ap325rxa __initmv = {
+ .mv_name = "AP-325RXA",
+ .mv_setup = ap325rxa_setup,
+};
--- /dev/null
+/*
+ * linux/arch/sh/boards/magicpanel/setup.c
+ *
+ * Copyright (C) 2007 Markus Brunner, Mark Jonas
+ *
+ * Magic Panel Release 2 board setup
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <asm/magicpanelr2.h>
+#include <asm/heartbeat.h>
+
+#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL)
+
+/* Prefer cmdline over RedBoot */
+static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+/* Wait until reset finished. Timeout is 100ms. */
+static int __init ethernet_reset_finished(void)
+{
+ int i;
+
+ if (LAN9115_READY)
+ return 1;
+
+ for (i = 0; i < 10; ++i) {
+ mdelay(10);
+ if (LAN9115_READY)
+ return 1;
+ }
+
+ return 0;
+}
+
+static void __init reset_ethernet(void)
+{
+ /* PMDR: LAN_RESET=on */
+ CLRBITS_OUTB(0x10, PORT_PMDR);
+
+ udelay(200);
+
+ /* PMDR: LAN_RESET=off */
+ SETBITS_OUTB(0x10, PORT_PMDR);
+}
+
+static void __init setup_chip_select(void)
+{
+ /* CS2: LAN (0x08000000 - 0x0bffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x36db0400, CS2BCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x000003c0, CS2WCR);
+
+ /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS4BCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x00100981, CS4WCR);
+
+ /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS5ABCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x00100981, CS5AWCR);
+
+ /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS5BBCR);
+ /* (SW:1.5 WR:3 HW:1.5), ext. wait */
+ ctrl_outl(0x00100981, CS5BWCR);
+
+ /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
+ /* no idle cycles, normal space, 8 bit data bus */
+ ctrl_outl(0x00000200, CS6ABCR);
+ /* (SW:1.5 WR:3 HW:1.5), no ext. wait */
+ ctrl_outl(0x001009C1, CS6AWCR);
+}
+
+static void __init setup_port_multiplexing(void)
+{
+ /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
+ * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
+ */
+ ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
+
+ /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
+ * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
+ */
+ ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
+
+ /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
+ * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
+ */
+ ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
+
+ /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
+ * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
+ */
+ ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
+
+ /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
+ * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
+ */
+ ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
+
+ /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
+ * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
+ */
+ ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
+
+ /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
+ * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
+ */
+ ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
+
+ /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
+ * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
+ */
+ ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
+
+ /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
+ * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
+ */
+ ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
+
+ /* K7 (x); K6 (x); K5 (x); K4 (x);
+ * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
+ */
+ ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
+
+ /* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
+ * L3 TCK; L2 (x); L1 (x); L0 (x);
+ */
+ ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
+
+ /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
+ * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
+ * M1 CS5B(CAN3_CS); M0 GPI+(nc);
+ */
+ ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
+
+ /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
+ * LAN_RESET=off, BUZZER=off, LCD_BL=off
+ */
+#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
+ ctrl_outb(0x30, PORT_PMDR);
+#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
+ ctrl_outb(0xF0, PORT_PMDR);
+#else
+#error Unknown revision of PLATFORM_MP_R2
+#endif
+
+ /* P7 (x); P6 (x); P5 (x);
+ * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
+ * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
+ */
+ ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
+ ctrl_outb(0x10, PORT_PPDR);
+
+ /* R7 A25; R6 A24; R5 A23; R4 A22;
+ * R3 A21; R2 A20; R1 A19; R0 A0;
+ */
+ ctrl_outw(0x0000, PORT_PRCR); /* 00 00 00 00 00 00 00 00 */
+
+ /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
+ * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
+ */
+ ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
+
+ /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
+ * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
+ */
+ ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
+
+ /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
+ * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
+ */
+ ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
+
+ /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
+ * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
+ */
+ ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
+}
+
+static void __init mpr2_setup(char **cmdline_p)
+{
+ __set_io_port_base(0xa0000000);
+
+ /* set Pin Select Register A:
+ * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
+ * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
+ */
+ ctrl_outw(0xAABC, PORT_PSELA);
+ /* set Pin Select Register B:
+ * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
+ * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
+ */
+ ctrl_outw(0x3C00, PORT_PSELB);
+ /* set Pin Select Register C:
+ * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
+ */
+ ctrl_outw(0x0000, PORT_PSELC);
+ /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
+ * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
+ */
+ ctrl_outw(0x0000, PORT_PSELD);
+ /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
+ ctrl_outw(0x0101, PORT_UTRCTL);
+ /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
+ ctrl_outw(0xA5C0, PORT_UCLKCR_W);
+
+ setup_chip_select();
+
+ setup_port_multiplexing();
+
+ reset_ethernet();
+
+ printk(KERN_INFO "Magic Panel Release 2 A.%i\n",
+ CONFIG_SH_MAGIC_PANEL_R2_VERSION);
+
+ if (ethernet_reset_finished() == 0)
+ printk(KERN_WARNING "Ethernet not ready\n");
+}
+
+static struct resource smc911x_resources[] = {
+ [0] = {
+ .start = 0xa8000000,
+ .end = 0xabffffff,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 35,
+ .end = 35,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc911x_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc911x_resources),
+ .resource = smc911x_resources,
+};
+
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PA_LED,
+ .end = PA_LED,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct heartbeat_data heartbeat_data = {
+ .flags = HEARTBEAT_INVERTED,
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = &heartbeat_data,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition mpr2_partitions[] = {
+ /* Reserved for bootloader, read-only */
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000UL,
+ .size = MPR2_MTD_BOOTLOADER_SIZE,
+ .mask_flags = MTD_WRITEABLE,
+ },
+ /* Reserved for kernel image */
+ {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MPR2_MTD_KERNEL_SIZE,
+ },
+ /* Rest is used for Flash FS */
+ {
+ .name = "Flash_FS",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data flash_data = {
+ .width = 2,
+};
+
+static struct resource flash_resource = {
+ .start = 0x00000000,
+ .end = 0x2000000UL,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &flash_data,
+ },
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info mpr2_flash_map = {
+ .name = "Magic Panel R2 Flash",
+ .size = 0x2000000UL,
+ .bankwidth = 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+ int nr_parts = 0;
+
+ simple_map_init(&mpr2_flash_map);
+ flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map);
+ nr_parts = parse_mtd_partitions(flash_mtd, probes,
+ &parsed_partitions, 0);
+ /* If there is no partition table, used the hard coded table */
+ if (nr_parts <= 0) {
+ flash_data.parts = mpr2_partitions;
+ flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions);
+ } else {
+ flash_data.nr_parts = nr_parts;
+ flash_data.parts = parsed_partitions;
+ }
+}
+
+/*
+ * Add all resources to the platform_device
+ */
+
+static struct platform_device *mpr2_devices[] __initdata = {
+ &heartbeat_device,
+ &smc911x_device,
+ &flash_device,
+};
+
+
+static int __init mpr2_devices_setup(void)
+{
+ set_mtd_partitions();
+ return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
+}
+device_initcall(mpr2_devices_setup);
+
+/*
+ * Initialize IRQ setting
+ */
+static void __init init_mpr2_IRQ(void)
+{
+ plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */
+
+ set_irq_type(32, IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */
+ set_irq_type(33, IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */
+ set_irq_type(34, IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */
+ set_irq_type(35, IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */
+ set_irq_type(36, IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */
+ set_irq_type(37, IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */
+
+ intc_set_priority(32, 13); /* IRQ0 CAN1 */
+ intc_set_priority(33, 13); /* IRQ0 CAN2 */
+ intc_set_priority(34, 13); /* IRQ0 CAN3 */
+ intc_set_priority(35, 6); /* IRQ3 SMSC9115 */
+}
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_mpr2 __initmv = {
+ .mv_name = "mpr2",
+ .mv_setup = mpr2_setup,
+ .mv_init_irq = init_mpr2_IRQ,
+};
--- /dev/null
+/*
+ * Renesas Technology Europe RSK+ 7203 Support.
+ *
+ * Copyright (C) 2008 Paul Mundt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/physmap.h>
+#include <linux/mtd/map.h>
+#include <linux/smc911x.h>
+#include <asm/machvec.h>
+#include <asm/io.h>
+
+static struct smc911x_platdata smc911x_info = {
+ .flags = SMC911X_USE_16BIT,
+ .irq_flags = IRQF_TRIGGER_LOW,
+};
+
+static struct resource smc911x_resources[] = {
+ [0] = {
+ .start = 0x24000000,
+ .end = 0x24000000 + 0x100,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 64,
+ .end = 64,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device smc911x_device = {
+ .name = "smc911x",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(smc911x_resources),
+ .resource = smc911x_resources,
+ .dev = {
+ .platform_data = &smc911x_info,
+ },
+};
+
+static const char *probes[] = { "cmdlinepart", NULL };
+
+static struct mtd_partition *parsed_partitions;
+
+static struct mtd_partition rsk7203_partitions[] = {
+ {
+ .name = "Bootloader",
+ .offset = 0x00000000,
+ .size = 0x00040000,
+ .mask_flags = MTD_WRITEABLE,
+ }, {
+ .name = "Kernel",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = 0x001c0000,
+ }, {
+ .name = "Flash_FS",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct physmap_flash_data flash_data = {
+ .width = 2,
+};
+
+static struct resource flash_resource = {
+ .start = 0x20000000,
+ .end = 0x20400000,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device flash_device = {
+ .name = "physmap-flash",
+ .id = -1,
+ .resource = &flash_resource,
+ .num_resources = 1,
+ .dev = {
+ .platform_data = &flash_data,
+ },
+};
+
+static struct mtd_info *flash_mtd;
+
+static struct map_info rsk7203_flash_map = {
+ .name = "RSK+ Flash",
+ .size = 0x400000,
+ .bankwidth = 2,
+};
+
+static void __init set_mtd_partitions(void)
+{
+ int nr_parts = 0;
+
+ simple_map_init(&rsk7203_flash_map);
+ flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
+ nr_parts = parse_mtd_partitions(flash_mtd, probes,
+ &parsed_partitions, 0);
+ /* If there is no partition table, used the hard coded table */
+ if (nr_parts <= 0) {
+ flash_data.parts = rsk7203_partitions;
+ flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
+ } else {
+ flash_data.nr_parts = nr_parts;
+ flash_data.parts = parsed_partitions;
+ }
+}
+
+
+static struct platform_device *rsk7203_devices[] __initdata = {
+ &smc911x_device,
+ &flash_device,
+};
+
+static int __init rsk7203_devices_setup(void)
+{
+ set_mtd_partitions();
+ return platform_add_devices(rsk7203_devices,
+ ARRAY_SIZE(rsk7203_devices));
+}
+device_initcall(rsk7203_devices_setup);
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_rsk7203 __initmv = {
+ .mv_name = "RSK+7203",
+};
--- /dev/null
+/*
+ * Renesas Technology Corp. R0P7785LC0011RL Support.
+ *
+ * Copyright (C) 2008 Yoshihiro Shimoda
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/sm501.h>
+#include <linux/sm501-regs.h>
+#include <linux/fb.h>
+#include <linux/mtd/physmap.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/i2c-pca-platform.h>
+#include <linux/i2c-algo-pca.h>
+#include <asm/heartbeat.h>
+#include <asm/sh7785lcr.h>
+
+/*
+ * NOTE: This board has 2 physical memory maps.
+ * Please look at include/asm-sh/sh7785lcr.h or hardware manual.
+ */
+static struct resource heartbeat_resources[] = {
+ [0] = {
+ .start = PLD_LEDCR,
+ .end = PLD_LEDCR,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct heartbeat_data heartbeat_data = {
+ .regsize = 8,
+};
+
+static struct platform_device heartbeat_device = {
+ .name = "heartbeat",
+ .id = -1,
+ .dev = {
+ .platform_data = &heartbeat_data,
+ },
+ .num_resources = ARRAY_SIZE(heartbeat_resources),
+ .resource = heartbeat_resources,
+};
+
+static struct mtd_partition nor_flash_partitions[] = {
+ {
+ .name = "loader",
+ .offset = 0x00000000,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "bootenv",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 512 * 1024,
+ },
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 4 * 1024 * 1024,
+ },
+ {
+ .name = "data",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct physmap_flash_data nor_flash_data = {
+ .width = 4,
+ .parts = nor_flash_partitions,
+ .nr_parts = ARRAY_SIZE(nor_flash_partitions),
+};
+
+static struct resource nor_flash_resources[] = {
+ [0] = {
+ .start = NOR_FLASH_ADDR,
+ .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static struct platform_device nor_flash_device = {
+ .name = "physmap-flash",
+ .dev = {
+ .platform_data = &nor_flash_data,
+ },
+ .num_resources = ARRAY_SIZE(nor_flash_resources),
+ .resource = nor_flash_resources,
+};
+
+static struct resource r8a66597_usb_host_resources[] = {
+ [0] = {
+ .name = "r8a66597_hcd",
+ .start = R8A66597_ADDR,
+ .end = R8A66597_ADDR + R8A66597_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .name = "r8a66597_hcd",
+ .start = 2,
+ .end = 2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device r8a66597_usb_host_device = {
+ .name = "r8a66597_hcd",
+ .id = -1,
+ .dev = {
+ .dma_mask = NULL,
+ .coherent_dma_mask = 0xffffffff,
+ },
+ .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
+ .resource = r8a66597_usb_host_resources,
+};
+
+static struct resource sm501_resources[] = {
+ [0] = {
+ .start = SM107_MEM_ADDR,
+ .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = SM107_REG_ADDR,
+ .end = SM107_REG_ADDR + SM107_REG_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [2] = {
+ .start = 10,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct fb_videomode sm501_default_mode_crt = {
+ .pixclock = 35714, /* 28MHz */
+ .xres = 640,
+ .yres = 480,
+ .left_margin = 105,
+ .right_margin = 16,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 39,
+ .vsync_len = 2,
+ .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
+};
+
+static struct fb_videomode sm501_default_mode_pnl = {
+ .pixclock = 40000, /* 25MHz */
+ .xres = 640,
+ .yres = 480,
+ .left_margin = 2,
+ .right_margin = 16,
+ .upper_margin = 33,
+ .lower_margin = 10,
+ .hsync_len = 39,
+ .vsync_len = 2,
+ .sync = 0,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
+ .def_bpp = 16,
+ .def_mode = &sm501_default_mode_pnl,
+ .flags = SM501FB_FLAG_USE_INIT_MODE |
+ SM501FB_FLAG_USE_HWCURSOR |
+ SM501FB_FLAG_USE_HWACCEL |
+ SM501FB_FLAG_DISABLE_AT_EXIT |
+ SM501FB_FLAG_PANEL_NO_VBIASEN,
+};
+
+static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
+ .def_bpp = 16,
+ .def_mode = &sm501_default_mode_crt,
+ .flags = SM501FB_FLAG_USE_INIT_MODE |
+ SM501FB_FLAG_USE_HWCURSOR |
+ SM501FB_FLAG_USE_HWACCEL |
+ SM501FB_FLAG_DISABLE_AT_EXIT,
+};
+
+static struct sm501_platdata_fb sm501_fb_pdata = {
+ .fb_route = SM501_FB_OWN,
+ .fb_crt = &sm501_pdata_fbsub_crt,
+ .fb_pnl = &sm501_pdata_fbsub_pnl,
+};
+
+static struct sm501_initdata sm501_initdata = {
+ .gpio_high = {
+ .set = 0x00001fe0,
+ .mask = 0x0,
+ },
+ .devices = 0,
+ .mclk = 84 * 1000000,
+ .m1xclk = 112 * 1000000,
+};
+
+static struct sm501_platdata sm501_platform_data = {
+ .init = &sm501_initdata,
+ .fb = &sm501_fb_pdata,
+};
+
+static struct platform_device sm501_device = {
+ .name = "sm501",
+ .id = -1,
+ .dev = {
+ .platform_data = &sm501_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(sm501_resources),
+ .resource = sm501_resources,
+};
+
+static struct resource i2c_resources[] = {
+ [0] = {
+ .start = PCA9564_ADDR,
+ .end = PCA9564_ADDR + PCA9564_SIZE - 1,
+ .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
+ },
+ [1] = {
+ .start = 12,
+ .end = 12,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
+ .gpio = 0,
+ .i2c_clock_speed = I2C_PCA_CON_330kHz,
+ .timeout = 100,
+};
+
+static struct platform_device i2c_device = {
+ .name = "i2c-pca-platform",
+ .id = -1,
+ .dev = {
+ .platform_data = &i2c_platform_data,
+ },
+ .num_resources = ARRAY_SIZE(i2c_resources),
+ .resource = i2c_resources,
+};
+
+static struct platform_device *sh7785lcr_devices[] __initdata = {
+ &heartbeat_device,
+ &nor_flash_device,
+ &r8a66597_usb_host_device,
+ &sm501_device,
+ &i2c_device,
+};
+
+static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("r2025sd", 0x32),
+ },
+};
+
+static int __init sh7785lcr_devices_setup(void)
+{
+ i2c_register_board_info(0, sh7785lcr_i2c_devices,
+ ARRAY_SIZE(sh7785lcr_i2c_devices));
+
+ return platform_add_devices(sh7785lcr_devices,
+ ARRAY_SIZE(sh7785lcr_devices));
+}
+__initcall(sh7785lcr_devices_setup);
+
+/* Initialize IRQ setting */
+void __init init_sh7785lcr_IRQ(void)
+{
+ plat_irq_setup_pins(IRQ_MODE_IRQ7654);
+ plat_irq_setup_pins(IRQ_MODE_IRQ3210);
+}
+
+static void sh7785lcr_power_off(void)
+{
+ ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
+}
+
+/* Initialize the board */
+static void __init sh7785lcr_setup(char **cmdline_p)
+{
+ void __iomem *sm501_reg;
+
+ printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
+
+ pm_power_off = sh7785lcr_power_off;
+
+ /* sm501 DRAM configuration */
+ sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
+ writel(0x000307c2, sm501_reg);
+}
+
+/*
+ * The Machine Vector
+ */
+static struct sh_machine_vector mv_sh7785lcr __initmv = {
+ .mv_name = "SH7785LCR",
+ .mv_setup = sh7785lcr_setup,
+ .mv_init_irq = init_sh7785lcr_IRQ,
+};
+
--- /dev/null
+/*
+ * arch/sh/boards/shmin/setup.c
+ *
+ * Copyright (C) 2006 Takashi YOSHII
+ *
+ * SHMIN Support.
+ */
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <asm/machvec.h>
+#include <asm/shmin.h>
+#include <asm/clock.h>
+#include <asm/io.h>
+
+#define PFC_PHCR 0xa400010eUL
+#define INTC_ICR1 0xa4000010UL
+
+static void __init init_shmin_irq(void)
+{
+ ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
+ ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
+ plat_irq_setup_pins(IRQ_MODE_IRQ);
+}
+
+static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
+{
+ static int dummy;
+
+ if ((port & ~0x1f) == SHMIN_NE_BASE)
+ return (void __iomem *)(SHMIN_IO_BASE + port);
+
+ dummy = 0;
+
+ return &dummy;
+
+}
+
+static struct sh_machine_vector mv_shmin __initmv = {
+ .mv_name = "SHMIN",
+ .mv_init_irq = init_shmin_irq,
+ .mv_ioport_map = shmin_ioport_map,
+};
+++ /dev/null
-obj-y := setup.o
+++ /dev/null
-/*
- * Renesas - AP-325RXA
- * (Compatible with Algo System ., LTD. - AP-320A)
- *
- * Copyright (C) 2008 Renesas Solutions Corp.
- * Author : Yusuke Goda <goda.yuske@renesas.com>
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/delay.h>
-#include <linux/smc911x.h>
-#include <media/soc_camera_platform.h>
-#include <media/sh_mobile_ceu.h>
-#include <asm/sh_mobile_lcdc.h>
-#include <asm/io.h>
-#include <asm/clock.h>
-
-static struct smc911x_platdata smc911x_info = {
- .flags = SMC911X_USE_32BIT,
- .irq_flags = IRQF_TRIGGER_LOW,
-};
-
-static struct resource smc9118_resources[] = {
- [0] = {
- .start = 0xb6080000,
- .end = 0xb60fffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 35,
- .end = 35,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device smc9118_device = {
- .name = "smc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc9118_resources),
- .resource = smc9118_resources,
- .dev = {
- .platform_data = &smc911x_info,
- },
-};
-
-static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
- {
- .name = "uboot",
- .offset = 0,
- .size = (1 * 1024 * 1024),
- .mask_flags = MTD_WRITEABLE, /* Read-only */
- }, {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = (2 * 1024 * 1024),
- }, {
- .name = "other",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data ap325rxa_nor_flash_data = {
- .width = 2,
- .parts = ap325rxa_nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(ap325rxa_nor_flash_partitions),
-};
-
-static struct resource ap325rxa_nor_flash_resources[] = {
- [0] = {
- .name = "NOR Flash",
- .start = 0x00000000,
- .end = 0x00ffffff,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device ap325rxa_nor_flash_device = {
- .name = "physmap-flash",
- .resource = ap325rxa_nor_flash_resources,
- .num_resources = ARRAY_SIZE(ap325rxa_nor_flash_resources),
- .dev = {
- .platform_data = &ap325rxa_nor_flash_data,
- },
-};
-
-#define FPGA_LCDREG 0xB4100180
-#define FPGA_BKLREG 0xB4100212
-#define FPGA_LCDREG_VAL 0x0018
-#define PORT_PHCR 0xA405010E
-#define PORT_PLCR 0xA4050114
-#define PORT_PMCR 0xA4050116
-#define PORT_PRCR 0xA405011C
-#define PORT_PSCR 0xA405011E
-#define PORT_PZCR 0xA405014C
-#define PORT_HIZCRA 0xA4050158
-#define PORT_MSELCRB 0xA4050182
-#define PORT_PSDR 0xA405013E
-#define PORT_PZDR 0xA405016C
-#define PORT_PSELD 0xA4050154
-
-static void ap320_wvga_power_on(void *board_data)
-{
- msleep(100);
-
- /* ASD AP-320/325 LCD ON */
- ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
-
- /* backlight */
- ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
- ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
- ctrl_outw(0x100, FPGA_BKLREG);
-}
-
-static struct sh_mobile_lcdc_info lcdc_info = {
- .clock_source = LCDC_CLK_EXTERNAL,
- .ch[0] = {
- .chan = LCDC_CHAN_MAINLCD,
- .bpp = 16,
- .interface_type = RGB18,
- .clock_divider = 1,
- .lcd_cfg = {
- .name = "LB070WV1",
- .xres = 800,
- .yres = 480,
- .left_margin = 40,
- .right_margin = 160,
- .hsync_len = 8,
- .upper_margin = 63,
- .lower_margin = 80,
- .vsync_len = 1,
- .sync = 0, /* hsync and vsync are active low */
- },
- .board_cfg = {
- .display_on = ap320_wvga_power_on,
- },
- }
-};
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .name = "LCDC",
- .start = 0xfe940000, /* P4-only space */
- .end = 0xfe941fff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device lcdc_device = {
- .name = "sh_mobile_lcdc_fb",
- .num_resources = ARRAY_SIZE(lcdc_resources),
- .resource = lcdc_resources,
- .dev = {
- .platform_data = &lcdc_info,
- },
-};
-
-#ifdef CONFIG_I2C
-static unsigned char camera_ncm03j_magic[] =
-{
- 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8,
- 0x1D, 0x00, 0x1E, 0x8A, 0x21, 0x00, 0x33, 0x36,
- 0x36, 0x60, 0x37, 0x08, 0x3B, 0x31, 0x44, 0x0F,
- 0x46, 0xF0, 0x4B, 0x28, 0x4C, 0x21, 0x4D, 0x55,
- 0x4E, 0x1B, 0x4F, 0xC7, 0x50, 0xFC, 0x51, 0x12,
- 0x58, 0x02, 0x66, 0xC0, 0x67, 0x46, 0x6B, 0xA0,
- 0x6C, 0x34, 0x7E, 0x25, 0x7F, 0x25, 0x8D, 0x0F,
- 0x92, 0x40, 0x93, 0x04, 0x94, 0x26, 0x95, 0x0A,
- 0x99, 0x03, 0x9A, 0xF0, 0x9B, 0x14, 0x9D, 0x7A,
- 0xC5, 0x02, 0xD6, 0x07, 0x59, 0x00, 0x5A, 0x1A,
- 0x5B, 0x2A, 0x5C, 0x37, 0x5D, 0x42, 0x5E, 0x56,
- 0xC8, 0x00, 0xC9, 0x1A, 0xCA, 0x2A, 0xCB, 0x37,
- 0xCC, 0x42, 0xCD, 0x56, 0xCE, 0x00, 0xCF, 0x1A,
- 0xD0, 0x2A, 0xD1, 0x37, 0xD2, 0x42, 0xD3, 0x56,
- 0x5F, 0x68, 0x60, 0x87, 0x61, 0xA3, 0x62, 0xBC,
- 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F,
-};
-
-static int camera_set_capture(struct soc_camera_platform_info *info,
- int enable)
-{
- struct i2c_adapter *a = i2c_get_adapter(0);
- struct i2c_msg msg;
- int ret = 0;
- int i;
-
- if (!enable)
- return 0; /* no disable for now */
-
- for (i = 0; i < ARRAY_SIZE(camera_ncm03j_magic); i += 2) {
- u_int8_t buf[8];
-
- msg.addr = 0x6e;
- msg.buf = buf;
- msg.len = 2;
- msg.flags = 0;
-
- buf[0] = camera_ncm03j_magic[i];
- buf[1] = camera_ncm03j_magic[i + 1];
-
- ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1);
- }
-
- return ret;
-}
-
-static struct soc_camera_platform_info camera_info = {
- .iface = 0,
- .format_name = "UYVY",
- .format_depth = 16,
- .format = {
- .pixelformat = V4L2_PIX_FMT_UYVY,
- .colorspace = V4L2_COLORSPACE_SMPTE170M,
- .width = 640,
- .height = 480,
- },
- .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
- .set_capture = camera_set_capture,
-};
-
-static struct platform_device camera_device = {
- .name = "soc_camera_platform",
- .dev = {
- .platform_data = &camera_info,
- },
-};
-#endif /* CONFIG_I2C */
-
-static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
- .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH |
- SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8,
-};
-
-static struct resource ceu_resources[] = {
- [0] = {
- .name = "CEU",
- .start = 0xfe910000,
- .end = 0xfe91009f,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 52,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- /* place holder for contiguous memory */
- },
-};
-
-static struct platform_device ceu_device = {
- .name = "sh_mobile_ceu",
- .num_resources = ARRAY_SIZE(ceu_resources),
- .resource = ceu_resources,
- .dev = {
- .platform_data = &sh_mobile_ceu_info,
- },
-};
-
-static struct platform_device *ap325rxa_devices[] __initdata = {
- &smc9118_device,
- &ap325rxa_nor_flash_device,
- &lcdc_device,
- &ceu_device,
-#ifdef CONFIG_I2C
- &camera_device,
-#endif
-};
-
-static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
-};
-
-static int __init ap325rxa_devices_setup(void)
-{
- clk_always_enable("mstp200"); /* LCDC */
- clk_always_enable("mstp203"); /* CEU */
-
- platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
-
- i2c_register_board_info(0, ap325rxa_i2c_devices,
- ARRAY_SIZE(ap325rxa_i2c_devices));
-
- return platform_add_devices(ap325rxa_devices,
- ARRAY_SIZE(ap325rxa_devices));
-}
-device_initcall(ap325rxa_devices_setup);
-
-static void __init ap325rxa_setup(char **cmdline_p)
-{
- /* LCDC configuration */
- ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
- ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
- ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
- ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
- ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
-
- /* CEU */
- ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
- ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
- ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
- ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
-}
-
-static struct sh_machine_vector mv_ap325rxa __initmv = {
- .mv_name = "AP-325RXA",
- .mv_setup = ap325rxa_setup,
-};
+++ /dev/null
-if SH_MAGIC_PANEL_R2
-
-menu "Magic Panel R2 options"
-
-config SH_MAGIC_PANEL_R2_VERSION
- int SH_MAGIC_PANEL_R2_VERSION
- default "3"
- help
- Set the version of the Magic Panel R2
-
-endmenu
-
-endif
+++ /dev/null
-#
-# Makefile for the Magic Panel specific parts
-#
-
-obj-y := setup.o
\ No newline at end of file
+++ /dev/null
-/*
- * linux/arch/sh/boards/magicpanel/setup.c
- *
- * Copyright (C) 2007 Markus Brunner, Mark Jonas
- *
- * Magic Panel Release 2 board setup
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
-#include <asm/magicpanelr2.h>
-#include <asm/heartbeat.h>
-
-#define LAN9115_READY (ctrl_inl(0xA8000084UL) & 0x00000001UL)
-
-/* Prefer cmdline over RedBoot */
-static const char *probes[] = { "cmdlinepart", "RedBoot", NULL };
-
-/* Wait until reset finished. Timeout is 100ms. */
-static int __init ethernet_reset_finished(void)
-{
- int i;
-
- if (LAN9115_READY)
- return 1;
-
- for (i = 0; i < 10; ++i) {
- mdelay(10);
- if (LAN9115_READY)
- return 1;
- }
-
- return 0;
-}
-
-static void __init reset_ethernet(void)
-{
- /* PMDR: LAN_RESET=on */
- CLRBITS_OUTB(0x10, PORT_PMDR);
-
- udelay(200);
-
- /* PMDR: LAN_RESET=off */
- SETBITS_OUTB(0x10, PORT_PMDR);
-}
-
-static void __init setup_chip_select(void)
-{
- /* CS2: LAN (0x08000000 - 0x0bffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x36db0400, CS2BCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x000003c0, CS2WCR);
-
- /* CS4: CAN1 (0xb0000000 - 0xb3ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS4BCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS4WCR);
-
- /* CS5a: CAN2 (0xb4000000 - 0xb5ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS5ABCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS5AWCR);
-
- /* CS5b: CAN3 (0xb6000000 - 0xb7ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS5BBCR);
- /* (SW:1.5 WR:3 HW:1.5), ext. wait */
- ctrl_outl(0x00100981, CS5BWCR);
-
- /* CS6a: Rotary (0xb8000000 - 0xb9ffffff) */
- /* no idle cycles, normal space, 8 bit data bus */
- ctrl_outl(0x00000200, CS6ABCR);
- /* (SW:1.5 WR:3 HW:1.5), no ext. wait */
- ctrl_outl(0x001009C1, CS6AWCR);
-}
-
-static void __init setup_port_multiplexing(void)
-{
- /* A7 GPO(LED8); A6 GPO(LED7); A5 GPO(LED6); A4 GPO(LED5);
- * A3 GPO(LED4); A2 GPO(LED3); A1 GPO(LED2); A0 GPO(LED1);
- */
- ctrl_outw(0x5555, PORT_PACR); /* 01 01 01 01 01 01 01 01 */
-
- /* B7 GPO(RST4); B6 GPO(RST3); B5 GPO(RST2); B4 GPO(RST1);
- * B3 GPO(PB3); B2 GPO(PB2); B1 GPO(PB1); B0 GPO(PB0);
- */
- ctrl_outw(0x5555, PORT_PBCR); /* 01 01 01 01 01 01 01 01 */
-
- /* C7 GPO(PC7); C6 GPO(PC6); C5 GPO(PC5); C4 GPO(PC4);
- * C3 LCD_DATA3; C2 LCD_DATA2; C1 LCD_DATA1; C0 LCD_DATA0;
- */
- ctrl_outw(0x5500, PORT_PCCR); /* 01 01 01 01 00 00 00 00 */
-
- /* D7 GPO(PD7); D6 GPO(PD6); D5 GPO(PD5); D4 GPO(PD4);
- * D3 GPO(PD3); D2 GPO(PD2); D1 GPO(PD1); D0 GPO(PD0);
- */
- ctrl_outw(0x5555, PORT_PDCR); /* 01 01 01 01 01 01 01 01 */
-
- /* E7 (x); E6 GPI(nu); E5 GPI(nu); E4 LCD_M_DISP;
- * E3 LCD_CL1; E2 LCD_CL2; E1 LCD_DON; E0 LCD_FLM;
- */
- ctrl_outw(0x3C00, PORT_PECR); /* 00 11 11 00 00 00 00 00 */
-
- /* F7 (x); F6 DA1(VLCD); F5 DA0(nc); F4 AN3;
- * F3 AN2(MID_AD); F2 AN1(EARTH_AD); F1 AN0(TEMP); F0 GPI+(nc);
- */
- ctrl_outw(0x0002, PORT_PFCR); /* 00 00 00 00 00 00 00 10 */
-
- /* G7 (x); G6 IRQ5(TOUCH_BUSY); G5 IRQ4(TOUCH_IRQ); G4 GPI(KEY2);
- * G3 GPI(KEY1); G2 GPO(LED11); G1 GPO(LED10); G0 GPO(LED9);
- */
- ctrl_outw(0x03D5, PORT_PGCR); /* 00 00 00 11 11 01 01 01 */
-
- /* H7 (x); H6 /RAS(BRAS); H5 /CAS(BCAS); H4 CKE(BCKE);
- * H3 GPO(EARTH_OFF); H2 GPO(EARTH_TEST); H1 USB2_PWR; H0 USB1_PWR;
- */
- ctrl_outw(0x0050, PORT_PHCR); /* 00 00 00 00 01 01 00 00 */
-
- /* J7 (x); J6 AUDCK; J5 ASEBRKAK; J4 AUDATA3;
- * J3 AUDATA2; J2 AUDATA1; J1 AUDATA0; J0 AUDSYNC;
- */
- ctrl_outw(0x0000, PORT_PJCR); /* 00 00 00 00 00 00 00 00 */
-
- /* K7 (x); K6 (x); K5 (x); K4 (x);
- * K3 PINT7(/PWR2); K2 PINT6(/PWR1); K1 PINT5(nu); K0 PINT4(FLASH_READY)
- */
- ctrl_outw(0x00FF, PORT_PKCR); /* 00 00 00 00 11 11 11 11 */
-
- /* L7 TRST; L6 TMS; L5 TDO; L4 TDI;
- * L3 TCK; L2 (x); L1 (x); L0 (x);
- */
- ctrl_outw(0x0000, PORT_PLCR); /* 00 00 00 00 00 00 00 00 */
-
- /* M7 GPO(CURRENT_SINK); M6 GPO(PWR_SWITCH); M5 GPO(LAN_SPEED);
- * M4 GPO(LAN_RESET); M3 GPO(BUZZER); M2 GPO(LCD_BL);
- * M1 CS5B(CAN3_CS); M0 GPI+(nc);
- */
- ctrl_outw(0x5552, PORT_PMCR); /* 01 01 01 01 01 01 00 10 */
-
- /* CURRENT_SINK=off, PWR_SWITCH=off, LAN_SPEED=100MBit,
- * LAN_RESET=off, BUZZER=off, LCD_BL=off
- */
-#if CONFIG_SH_MAGIC_PANEL_R2_VERSION == 2
- ctrl_outb(0x30, PORT_PMDR);
-#elif CONFIG_SH_MAGIC_PANEL_R2_VERSION == 3
- ctrl_outb(0xF0, PORT_PMDR);
-#else
-#error Unknown revision of PLATFORM_MP_R2
-#endif
-
- /* P7 (x); P6 (x); P5 (x);
- * P4 GPO(nu); P3 IRQ3(LAN_IRQ); P2 IRQ2(CAN3_IRQ);
- * P1 IRQ1(CAN2_IRQ); P0 IRQ0(CAN1_IRQ)
- */
- ctrl_outw(0x0100, PORT_PPCR); /* 00 00 00 01 00 00 00 00 */
- ctrl_outb(0x10, PORT_PPDR);
-
- /* R7 A25; R6 A24; R5 A23; R4 A22;
- * R3 A21; R2 A20; R1 A19; R0 A0;
- */
- ctrl_outw(0x0000, PORT_PRCR); /* 00 00 00 00 00 00 00 00 */
-
- /* S7 (x); S6 (x); S5 (x); S4 GPO(EEPROM_CS2);
- * S3 GPO(EEPROM_CS1); S2 SIOF0_TXD; S1 SIOF0_RXD; S0 SIOF0_SCK;
- */
- ctrl_outw(0x0140, PORT_PSCR); /* 00 00 00 01 01 00 00 00 */
-
- /* T7 (x); T6 (x); T5 (x); T4 COM1_CTS;
- * T3 COM1_RTS; T2 COM1_TXD; T1 COM1_RXD; T0 GPO(WDOG)
- */
- ctrl_outw(0x0001, PORT_PTCR); /* 00 00 00 00 00 00 00 01 */
-
- /* U7 (x); U6 (x); U5 (x); U4 GPI+(/AC_FAULT);
- * U3 GPO(TOUCH_CS); U2 TOUCH_TXD; U1 TOUCH_RXD; U0 TOUCH_SCK;
- */
- ctrl_outw(0x0240, PORT_PUCR); /* 00 00 00 10 01 00 00 00 */
-
- /* V7 (x); V6 (x); V5 (x); V4 GPO(MID2);
- * V3 GPO(MID1); V2 CARD_TxD; V1 CARD_RxD; V0 GPI+(/BAT_FAULT);
- */
- ctrl_outw(0x0142, PORT_PVCR); /* 00 00 00 01 01 00 00 10 */
-}
-
-static void __init mpr2_setup(char **cmdline_p)
-{
- __set_io_port_base(0xa0000000);
-
- /* set Pin Select Register A:
- * /PCC_CD1, /PCC_CD2, PCC_BVD1, PCC_BVD2,
- * /IOIS16, IRQ4, IRQ5, USB1d_SUSPEND
- */
- ctrl_outw(0xAABC, PORT_PSELA);
- /* set Pin Select Register B:
- * /SCIF0_RTS, /SCIF0_CTS, LCD_VCPWC,
- * LCD_VEPWC, IIC_SDA, IIC_SCL, Reserved
- */
- ctrl_outw(0x3C00, PORT_PSELB);
- /* set Pin Select Register C:
- * SIOF1_SCK, SIOF1_RxD, SCIF1_RxD, SCIF1_TxD, Reserved
- */
- ctrl_outw(0x0000, PORT_PSELC);
- /* set Pin Select Register D: Reserved, SIOF1_TxD, Reserved, SIOF1_MCLK,
- * Reserved, SIOF1_SYNC, Reserved, SCIF1_SCK, Reserved
- */
- ctrl_outw(0x0000, PORT_PSELD);
- /* set USB TxRx Control: Reserved, DRV, Reserved, USB_TRANS, USB_SEL */
- ctrl_outw(0x0101, PORT_UTRCTL);
- /* set USB Clock Control: USSCS, USSTB, Reserved (HighByte always A5) */
- ctrl_outw(0xA5C0, PORT_UCLKCR_W);
-
- setup_chip_select();
-
- setup_port_multiplexing();
-
- reset_ethernet();
-
- printk(KERN_INFO "Magic Panel Release 2 A.%i\n",
- CONFIG_SH_MAGIC_PANEL_R2_VERSION);
-
- if (ethernet_reset_finished() == 0)
- printk(KERN_WARNING "Ethernet not ready\n");
-}
-
-static struct resource smc911x_resources[] = {
- [0] = {
- .start = 0xa8000000,
- .end = 0xabffffff,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 35,
- .end = 35,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc911x_device = {
- .name = "smc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc911x_resources),
- .resource = smc911x_resources,
-};
-
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PA_LED,
- .end = PA_LED,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct heartbeat_data heartbeat_data = {
- .flags = HEARTBEAT_INVERTED,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct mtd_partition *parsed_partitions;
-
-static struct mtd_partition mpr2_partitions[] = {
- /* Reserved for bootloader, read-only */
- {
- .name = "Bootloader",
- .offset = 0x00000000UL,
- .size = MPR2_MTD_BOOTLOADER_SIZE,
- .mask_flags = MTD_WRITEABLE,
- },
- /* Reserved for kernel image */
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MPR2_MTD_KERNEL_SIZE,
- },
- /* Rest is used for Flash FS */
- {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .width = 2,
-};
-
-static struct resource flash_resource = {
- .start = 0x00000000,
- .end = 0x2000000UL,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-static struct mtd_info *flash_mtd;
-
-static struct map_info mpr2_flash_map = {
- .name = "Magic Panel R2 Flash",
- .size = 0x2000000UL,
- .bankwidth = 2,
-};
-
-static void __init set_mtd_partitions(void)
-{
- int nr_parts = 0;
-
- simple_map_init(&mpr2_flash_map);
- flash_mtd = do_map_probe("cfi_probe", &mpr2_flash_map);
- nr_parts = parse_mtd_partitions(flash_mtd, probes,
- &parsed_partitions, 0);
- /* If there is no partition table, used the hard coded table */
- if (nr_parts <= 0) {
- flash_data.parts = mpr2_partitions;
- flash_data.nr_parts = ARRAY_SIZE(mpr2_partitions);
- } else {
- flash_data.nr_parts = nr_parts;
- flash_data.parts = parsed_partitions;
- }
-}
-
-/*
- * Add all resources to the platform_device
- */
-
-static struct platform_device *mpr2_devices[] __initdata = {
- &heartbeat_device,
- &smc911x_device,
- &flash_device,
-};
-
-
-static int __init mpr2_devices_setup(void)
-{
- set_mtd_partitions();
- return platform_add_devices(mpr2_devices, ARRAY_SIZE(mpr2_devices));
-}
-device_initcall(mpr2_devices_setup);
-
-/*
- * Initialize IRQ setting
- */
-static void __init init_mpr2_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ); /* install handlers for IRQ0-5 */
-
- set_irq_type(32, IRQ_TYPE_LEVEL_LOW); /* IRQ0 CAN1 */
- set_irq_type(33, IRQ_TYPE_LEVEL_LOW); /* IRQ1 CAN2 */
- set_irq_type(34, IRQ_TYPE_LEVEL_LOW); /* IRQ2 CAN3 */
- set_irq_type(35, IRQ_TYPE_LEVEL_LOW); /* IRQ3 SMSC9115 */
- set_irq_type(36, IRQ_TYPE_EDGE_RISING); /* IRQ4 touchscreen */
- set_irq_type(37, IRQ_TYPE_EDGE_FALLING); /* IRQ5 touchscreen */
-
- intc_set_priority(32, 13); /* IRQ0 CAN1 */
- intc_set_priority(33, 13); /* IRQ0 CAN2 */
- intc_set_priority(34, 13); /* IRQ0 CAN3 */
- intc_set_priority(35, 6); /* IRQ3 SMSC9115 */
-}
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_mpr2 __initmv = {
- .mv_name = "mpr2",
- .mv_setup = mpr2_setup,
- .mv_init_irq = init_mpr2_IRQ,
-};
+++ /dev/null
-obj-y := setup.o
+++ /dev/null
-/*
- * Renesas Technology Europe RSK+ 7203 Support.
- *
- * Copyright (C) 2008 Paul Mundt
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/map.h>
-#include <linux/smc911x.h>
-#include <asm/machvec.h>
-#include <asm/io.h>
-
-static struct smc911x_platdata smc911x_info = {
- .flags = SMC911X_USE_16BIT,
- .irq_flags = IRQF_TRIGGER_LOW,
-};
-
-static struct resource smc911x_resources[] = {
- [0] = {
- .start = 0x24000000,
- .end = 0x24000000 + 0x100,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = 64,
- .end = 64,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device smc911x_device = {
- .name = "smc911x",
- .id = -1,
- .num_resources = ARRAY_SIZE(smc911x_resources),
- .resource = smc911x_resources,
- .dev = {
- .platform_data = &smc911x_info,
- },
-};
-
-static const char *probes[] = { "cmdlinepart", NULL };
-
-static struct mtd_partition *parsed_partitions;
-
-static struct mtd_partition rsk7203_partitions[] = {
- {
- .name = "Bootloader",
- .offset = 0x00000000,
- .size = 0x00040000,
- .mask_flags = MTD_WRITEABLE,
- }, {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 0x001c0000,
- }, {
- .name = "Flash_FS",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct physmap_flash_data flash_data = {
- .width = 2,
-};
-
-static struct resource flash_resource = {
- .start = 0x20000000,
- .end = 0x20400000,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = &flash_resource,
- .num_resources = 1,
- .dev = {
- .platform_data = &flash_data,
- },
-};
-
-static struct mtd_info *flash_mtd;
-
-static struct map_info rsk7203_flash_map = {
- .name = "RSK+ Flash",
- .size = 0x400000,
- .bankwidth = 2,
-};
-
-static void __init set_mtd_partitions(void)
-{
- int nr_parts = 0;
-
- simple_map_init(&rsk7203_flash_map);
- flash_mtd = do_map_probe("cfi_probe", &rsk7203_flash_map);
- nr_parts = parse_mtd_partitions(flash_mtd, probes,
- &parsed_partitions, 0);
- /* If there is no partition table, used the hard coded table */
- if (nr_parts <= 0) {
- flash_data.parts = rsk7203_partitions;
- flash_data.nr_parts = ARRAY_SIZE(rsk7203_partitions);
- } else {
- flash_data.nr_parts = nr_parts;
- flash_data.parts = parsed_partitions;
- }
-}
-
-
-static struct platform_device *rsk7203_devices[] __initdata = {
- &smc911x_device,
- &flash_device,
-};
-
-static int __init rsk7203_devices_setup(void)
-{
- set_mtd_partitions();
- return platform_add_devices(rsk7203_devices,
- ARRAY_SIZE(rsk7203_devices));
-}
-device_initcall(rsk7203_devices_setup);
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_rsk7203 __initmv = {
- .mv_name = "RSK+7203",
-};
+++ /dev/null
-#
-# Makefile for the 7619 SolutionEngine specific parts of the kernel
-#
-
-obj-y := setup.o
+++ /dev/null
-/*
- * arch/sh/boards/se/7619/setup.c
- *
- * Copyright (C) 2006 Yoshinori Sato
- *
- * Hitachi SH7619 SolutionEngine Support.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <asm/io.h>
-#include <asm/machvec.h>
-
-/*
- * The Machine Vector
- */
-
-static struct sh_machine_vector mv_se __initmv = {
- .mv_name = "SolutionEngine",
- .mv_nr_irqs = 108,
-};
+obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += board-se7619.o
+
obj-$(CONFIG_SH_SOLUTION_ENGINE) += 770x/
obj-$(CONFIG_SH_7206_SOLUTION_ENGINE) += 7206/
-obj-$(CONFIG_SH_7619_SOLUTION_ENGINE) += 7619/
obj-$(CONFIG_SH_7722_SOLUTION_ENGINE) += 7722/
obj-$(CONFIG_SH_7751_SOLUTION_ENGINE) += 7751/
obj-$(CONFIG_SH_7780_SOLUTION_ENGINE) += 7780/
--- /dev/null
+/*
+ * arch/sh/boards/se/7619/setup.c
+ *
+ * Copyright (C) 2006 Yoshinori Sato
+ *
+ * Hitachi SH7619 SolutionEngine Support.
+ */
+
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/machvec.h>
+
+/*
+ * The Machine Vector
+ */
+
+static struct sh_machine_vector mv_se __initmv = {
+ .mv_name = "SolutionEngine",
+ .mv_nr_irqs = 108,
+};
+++ /dev/null
-obj-y := setup.o
+++ /dev/null
-/*
- * Renesas Technology Corp. R0P7785LC0011RL Support.
- *
- * Copyright (C) 2008 Yoshihiro Shimoda
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/sm501.h>
-#include <linux/sm501-regs.h>
-#include <linux/fb.h>
-#include <linux/mtd/physmap.h>
-#include <linux/delay.h>
-#include <linux/i2c.h>
-#include <linux/i2c-pca-platform.h>
-#include <linux/i2c-algo-pca.h>
-#include <asm/heartbeat.h>
-#include <asm/sh7785lcr.h>
-
-/*
- * NOTE: This board has 2 physical memory maps.
- * Please look at include/asm-sh/sh7785lcr.h or hardware manual.
- */
-static struct resource heartbeat_resources[] = {
- [0] = {
- .start = PLD_LEDCR,
- .end = PLD_LEDCR,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct heartbeat_data heartbeat_data = {
- .regsize = 8,
-};
-
-static struct platform_device heartbeat_device = {
- .name = "heartbeat",
- .id = -1,
- .dev = {
- .platform_data = &heartbeat_data,
- },
- .num_resources = ARRAY_SIZE(heartbeat_resources),
- .resource = heartbeat_resources,
-};
-
-static struct mtd_partition nor_flash_partitions[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * 1024 * 1024,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct physmap_flash_data nor_flash_data = {
- .width = 4,
- .parts = nor_flash_partitions,
- .nr_parts = ARRAY_SIZE(nor_flash_partitions),
-};
-
-static struct resource nor_flash_resources[] = {
- [0] = {
- .start = NOR_FLASH_ADDR,
- .end = NOR_FLASH_ADDR + NOR_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device nor_flash_device = {
- .name = "physmap-flash",
- .dev = {
- .platform_data = &nor_flash_data,
- },
- .num_resources = ARRAY_SIZE(nor_flash_resources),
- .resource = nor_flash_resources,
-};
-
-static struct resource r8a66597_usb_host_resources[] = {
- [0] = {
- .name = "r8a66597_hcd",
- .start = R8A66597_ADDR,
- .end = R8A66597_ADDR + R8A66597_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .name = "r8a66597_hcd",
- .start = 2,
- .end = 2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device r8a66597_usb_host_device = {
- .name = "r8a66597_hcd",
- .id = -1,
- .dev = {
- .dma_mask = NULL,
- .coherent_dma_mask = 0xffffffff,
- },
- .num_resources = ARRAY_SIZE(r8a66597_usb_host_resources),
- .resource = r8a66597_usb_host_resources,
-};
-
-static struct resource sm501_resources[] = {
- [0] = {
- .start = SM107_MEM_ADDR,
- .end = SM107_MEM_ADDR + SM107_MEM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = SM107_REG_ADDR,
- .end = SM107_REG_ADDR + SM107_REG_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = 10,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct fb_videomode sm501_default_mode_crt = {
- .pixclock = 35714, /* 28MHz */
- .xres = 640,
- .yres = 480,
- .left_margin = 105,
- .right_margin = 16,
- .upper_margin = 33,
- .lower_margin = 10,
- .hsync_len = 39,
- .vsync_len = 2,
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
-};
-
-static struct fb_videomode sm501_default_mode_pnl = {
- .pixclock = 40000, /* 25MHz */
- .xres = 640,
- .yres = 480,
- .left_margin = 2,
- .right_margin = 16,
- .upper_margin = 33,
- .lower_margin = 10,
- .hsync_len = 39,
- .vsync_len = 2,
- .sync = 0,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_pnl = {
- .def_bpp = 16,
- .def_mode = &sm501_default_mode_pnl,
- .flags = SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT |
- SM501FB_FLAG_PANEL_NO_VBIASEN,
-};
-
-static struct sm501_platdata_fbsub sm501_pdata_fbsub_crt = {
- .def_bpp = 16,
- .def_mode = &sm501_default_mode_crt,
- .flags = SM501FB_FLAG_USE_INIT_MODE |
- SM501FB_FLAG_USE_HWCURSOR |
- SM501FB_FLAG_USE_HWACCEL |
- SM501FB_FLAG_DISABLE_AT_EXIT,
-};
-
-static struct sm501_platdata_fb sm501_fb_pdata = {
- .fb_route = SM501_FB_OWN,
- .fb_crt = &sm501_pdata_fbsub_crt,
- .fb_pnl = &sm501_pdata_fbsub_pnl,
-};
-
-static struct sm501_initdata sm501_initdata = {
- .gpio_high = {
- .set = 0x00001fe0,
- .mask = 0x0,
- },
- .devices = 0,
- .mclk = 84 * 1000000,
- .m1xclk = 112 * 1000000,
-};
-
-static struct sm501_platdata sm501_platform_data = {
- .init = &sm501_initdata,
- .fb = &sm501_fb_pdata,
-};
-
-static struct platform_device sm501_device = {
- .name = "sm501",
- .id = -1,
- .dev = {
- .platform_data = &sm501_platform_data,
- },
- .num_resources = ARRAY_SIZE(sm501_resources),
- .resource = sm501_resources,
-};
-
-static struct resource i2c_resources[] = {
- [0] = {
- .start = PCA9564_ADDR,
- .end = PCA9564_ADDR + PCA9564_SIZE - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8BIT,
- },
- [1] = {
- .start = 12,
- .end = 12,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct i2c_pca9564_pf_platform_data i2c_platform_data = {
- .gpio = 0,
- .i2c_clock_speed = I2C_PCA_CON_330kHz,
- .timeout = 100,
-};
-
-static struct platform_device i2c_device = {
- .name = "i2c-pca-platform",
- .id = -1,
- .dev = {
- .platform_data = &i2c_platform_data,
- },
- .num_resources = ARRAY_SIZE(i2c_resources),
- .resource = i2c_resources,
-};
-
-static struct platform_device *sh7785lcr_devices[] __initdata = {
- &heartbeat_device,
- &nor_flash_device,
- &r8a66597_usb_host_device,
- &sm501_device,
- &i2c_device,
-};
-
-static struct i2c_board_info __initdata sh7785lcr_i2c_devices[] = {
- {
- I2C_BOARD_INFO("r2025sd", 0x32),
- },
-};
-
-static int __init sh7785lcr_devices_setup(void)
-{
- i2c_register_board_info(0, sh7785lcr_i2c_devices,
- ARRAY_SIZE(sh7785lcr_i2c_devices));
-
- return platform_add_devices(sh7785lcr_devices,
- ARRAY_SIZE(sh7785lcr_devices));
-}
-__initcall(sh7785lcr_devices_setup);
-
-/* Initialize IRQ setting */
-void __init init_sh7785lcr_IRQ(void)
-{
- plat_irq_setup_pins(IRQ_MODE_IRQ7654);
- plat_irq_setup_pins(IRQ_MODE_IRQ3210);
-}
-
-static void sh7785lcr_power_off(void)
-{
- ctrl_outb(0x01, P2SEGADDR(PLD_POFCR));
-}
-
-/* Initialize the board */
-static void __init sh7785lcr_setup(char **cmdline_p)
-{
- void __iomem *sm501_reg;
-
- printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
-
- pm_power_off = sh7785lcr_power_off;
-
- /* sm501 DRAM configuration */
- sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL;
- writel(0x000307c2, sm501_reg);
-}
-
-/*
- * The Machine Vector
- */
-static struct sh_machine_vector mv_sh7785lcr __initmv = {
- .mv_name = "SH7785LCR",
- .mv_setup = sh7785lcr_setup,
- .mv_init_irq = init_sh7785lcr_IRQ,
-};
-
+++ /dev/null
-#
-# Makefile for the SHMIN board.
-#
-
-obj-y := setup.o
+++ /dev/null
-/*
- * arch/sh/boards/shmin/setup.c
- *
- * Copyright (C) 2006 Takashi YOSHII
- *
- * SHMIN Support.
- */
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <asm/machvec.h>
-#include <asm/shmin.h>
-#include <asm/clock.h>
-#include <asm/io.h>
-
-#define PFC_PHCR 0xa400010eUL
-#define INTC_ICR1 0xa4000010UL
-
-static void __init init_shmin_irq(void)
-{
- ctrl_outw(0x2a00, PFC_PHCR); // IRQ0-3=IRQ
- ctrl_outw(0x0aaa, INTC_ICR1); // IRQ0-3=IRQ-mode,Low-active.
- plat_irq_setup_pins(IRQ_MODE_IRQ);
-}
-
-static void __iomem *shmin_ioport_map(unsigned long port, unsigned int size)
-{
- static int dummy;
-
- if ((port & ~0x1f) == SHMIN_NE_BASE)
- return (void __iomem *)(SHMIN_IO_BASE + port);
-
- dummy = 0;
-
- return &dummy;
-
-}
-
-static struct sh_machine_vector mv_shmin __initmv = {
- .mv_name = "SHMIN",
- .mv_init_irq = init_shmin_irq,
- .mv_ioport_map = shmin_ioport_map,
-};
projects / ~shefty / rdma-dev.git / commitdiff