]> git.openfabrics.org - ~shefty/rdma-dev.git/commitdiff
mac80211: allow drivers to access IPv6 information
authorJohannes Berg <johannes.berg@intel.com>
Mon, 14 Jan 2013 14:14:34 +0000 (15:14 +0100)
committerJohannes Berg <johannes.berg@intel.com>
Fri, 18 Jan 2013 20:55:38 +0000 (21:55 +0100)
To be able to implement NS response offloading (in
regular operation or while in WoWLAN) drivers need
to know the IPv6 addresses assigned to interfaces.
Implement an IPv6 notifier in mac80211 to call the
driver when addresses change.

Unlike for IPv4, implement it as a callback rather
than as a list in the BSS configuration, that is
more flexible.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
include/net/mac80211.h
net/mac80211/driver-ops.h
net/mac80211/ieee80211_i.h
net/mac80211/main.c
net/mac80211/trace.h

index 679ad4bb222b7bb27ded34335a400bb5666c6883..ece5733d113dd33aa005d0c5ba4df8a184c4b89f 100644 (file)
@@ -2497,6 +2497,9 @@ enum ieee80211_rate_control_changed {
  *     driver's resume function returned 1, as this is just like an "inline"
  *     hardware restart. This callback may sleep.
  *
+ * @ipv6_addr_change: IPv6 address assignment on the given interface changed.
+ *     Currently, this is only called for managed or P2P client interfaces.
+ *     This callback is optional; it must not sleep.
  */
 struct ieee80211_ops {
        void (*tx)(struct ieee80211_hw *hw,
@@ -2672,6 +2675,12 @@ struct ieee80211_ops {
                                     struct ieee80211_chanctx_conf *ctx);
 
        void (*restart_complete)(struct ieee80211_hw *hw);
+
+#if IS_ENABLED(CONFIG_IPV6)
+       void (*ipv6_addr_change)(struct ieee80211_hw *hw,
+                                struct ieee80211_vif *vif,
+                                struct inet6_dev *idev);
+#endif
 };
 
 /**
index e6033b06cabaf010129f8be82d1dc2a74ae1d66e..d51afbd614d356ddcde3f9101ab922c7f05ae8b5 100644 (file)
@@ -1036,4 +1036,16 @@ drv_set_default_unicast_key(struct ieee80211_local *local,
        trace_drv_return_void(local);
 }
 
+#if IS_ENABLED(CONFIG_IPV6)
+static inline void drv_ipv6_addr_change(struct ieee80211_local *local,
+                                       struct ieee80211_sub_if_data *sdata,
+                                       struct inet6_dev *idev)
+{
+       trace_drv_ipv6_addr_change(local, sdata);
+       if (local->ops->ipv6_addr_change)
+               local->ops->ipv6_addr_change(&local->hw, &sdata->vif, idev);
+       trace_drv_return_void(local);
+}
+#endif
+
 #endif /* __MAC80211_DRIVER_OPS */
index b1fed5491ed68dc08297754aec0220a78e717c72..aec1b332aeb7cb27ae39e4807ac2f3fec40a5a0c 100644 (file)
@@ -1127,6 +1127,7 @@ struct ieee80211_local {
        struct timer_list dynamic_ps_timer;
        struct notifier_block network_latency_notifier;
        struct notifier_block ifa_notifier;
+       struct notifier_block ifa6_notifier;
 
        /*
         * The dynamic ps timeout configured from user space via WEXT -
index baf9720c18766748b36bd7c079e97b0dbca11e6c..2bdd454e8bcf4871f3935657de65c54f6906417c 100644 (file)
@@ -23,6 +23,7 @@
 #include <linux/inetdevice.h>
 #include <net/net_namespace.h>
 #include <net/cfg80211.h>
+#include <net/addrconf.h>
 
 #include "ieee80211_i.h"
 #include "driver-ops.h"
@@ -369,6 +370,37 @@ static int ieee80211_ifa_changed(struct notifier_block *nb,
 }
 #endif
 
+#if IS_ENABLED(CONFIG_IPV6)
+static int ieee80211_ifa6_changed(struct notifier_block *nb,
+                                 unsigned long data, void *arg)
+{
+       struct inet6_ifaddr *ifa = (struct inet6_ifaddr *)arg;
+       struct inet6_dev *idev = ifa->idev;
+       struct net_device *ndev = ifa->idev->dev;
+       struct ieee80211_local *local =
+               container_of(nb, struct ieee80211_local, ifa6_notifier);
+       struct wireless_dev *wdev = ndev->ieee80211_ptr;
+       struct ieee80211_sub_if_data *sdata;
+
+       /* Make sure it's our interface that got changed */
+       if (!wdev || wdev->wiphy != local->hw.wiphy)
+               return NOTIFY_DONE;
+
+       sdata = IEEE80211_DEV_TO_SUB_IF(ndev);
+
+       /*
+        * For now only support station mode. This is mostly because
+        * doing AP would have to handle AP_VLAN in some way ...
+        */
+       if (sdata->vif.type != NL80211_IFTYPE_STATION)
+               return NOTIFY_DONE;
+
+       drv_ipv6_addr_change(local, sdata, idev);
+
+       return NOTIFY_DONE;
+}
+#endif
+
 static int ieee80211_napi_poll(struct napi_struct *napi, int budget)
 {
        struct ieee80211_local *local =
@@ -977,12 +1009,25 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
                goto fail_ifa;
 #endif
 
+#if IS_ENABLED(CONFIG_IPV6)
+       local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed;
+       result = register_inet6addr_notifier(&local->ifa6_notifier);
+       if (result)
+               goto fail_ifa6;
+#endif
+
        netif_napi_add(&local->napi_dev, &local->napi, ieee80211_napi_poll,
                        local->hw.napi_weight);
 
        return 0;
 
+#if IS_ENABLED(CONFIG_IPV6)
+ fail_ifa6:
 #ifdef CONFIG_INET
+       unregister_inetaddr_notifier(&local->ifa_notifier);
+#endif
+#endif
+#if defined(CONFIG_INET) || defined(CONFIG_IPV6)
  fail_ifa:
        pm_qos_remove_notifier(PM_QOS_NETWORK_LATENCY,
                               &local->network_latency_notifier);
@@ -1018,6 +1063,9 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
 #ifdef CONFIG_INET
        unregister_inetaddr_notifier(&local->ifa_notifier);
 #endif
+#if IS_ENABLED(CONFIG_IPV6)
+       unregister_inet6addr_notifier(&local->ifa6_notifier);
+#endif
 
        rtnl_lock();
 
index e9f95913c6f0f9ec58900946cd8fb48362878539..2a2c2e20307d73d73055a397ecbe911416c808ac 100644 (file)
@@ -1437,6 +1437,14 @@ DEFINE_EVENT(local_only_evt, drv_restart_complete,
        TP_ARGS(local)
 );
 
+#if IS_ENABLED(CONFIG_IPV6)
+DEFINE_EVENT(local_sdata_evt, drv_ipv6_addr_change,
+       TP_PROTO(struct ieee80211_local *local,
+                struct ieee80211_sub_if_data *sdata),
+       TP_ARGS(local, sdata)
+);
+#endif
+
 /*
  * Tracing for API calls that drivers call.
  */