[media] V4L menu: move all platform drivers to the bottom of the menu

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index 988823ba20b3150d8a8ffcc978855ba3ac43891f..717a881e704a192e0b61f845d72db0427b26b956 100644 (file)
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -653,25 +653,6 @@ config USB_S2255
 
 endif # V4L_USB_DRIVERS
 
-config VIDEO_SH_VOU
-       tristate "SuperH VOU video output driver"
-       depends on VIDEO_DEV && ARCH_SHMOBILE
-       select VIDEOBUF_DMA_CONTIG
-       help
-         Support for the Video Output Unit (VOU) on SuperH SoCs.
-
-config VIDEO_VIU
-       tristate "Freescale VIU Video Driver"
-       depends on VIDEO_V4L2 && PPC_MPC512x
-       select VIDEOBUF_DMA_CONTIG
-       default y
-       ---help---
-         Support for Freescale VIU video driver. This device captures
-         video data, or overlays video on DIU frame buffer.
-
-         Say Y here if you want to enable VIU device on MPC5121e Rev2+.
-         In doubt, say N.
-
 config VIDEO_VIVI
        tristate "Virtual Video Driver"
        depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
@@ -686,22 +667,10 @@ config VIDEO_VIVI
          Say Y here if you want to test video apps or debug V4L devices.
          In doubt, say N.
 
-source "drivers/media/video/davinci/Kconfig"
-
-source "drivers/media/video/omap/Kconfig"
-
 source "drivers/media/video/bt8xx/Kconfig"
 
 source "drivers/media/video/cpia2/Kconfig"
 
-config VIDEO_VINO
-       tristate "SGI Vino Video For Linux"
-       depends on I2C && SGI_IP22 && VIDEO_V4L2
-       select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
-       help
-         Say Y here to build in support for the Vino video input system found
-         on SGI Indy machines.
-
 source "drivers/media/video/zoran/Kconfig"
 
 config VIDEO_MEYE
@@ -759,16 +728,6 @@ config VIDEO_HEXIUM_GEMINI
          To compile this driver as a module, choose M here: the
          module will be called hexium_gemini.
 
-config VIDEO_TIMBERDALE
-       tristate "Support for timberdale Video In/LogiWIN"
-       depends on VIDEO_V4L2 && I2C && DMADEVICES
-       select DMA_ENGINE
-       select TIMB_DMA
-       select VIDEO_ADV7180
-       select VIDEOBUF_DMA_CONTIG
-       ---help---
-         Add support for the Video In peripherial of the timberdale FPGA.
-
 source "drivers/media/video/cx88/Kconfig"
 
 source "drivers/media/video/cx23885/Kconfig"
@@ -844,6 +803,61 @@ endif # V4L_ISA_PARPORT_DRIVERS
 
 source "drivers/media/video/marvell-ccic/Kconfig"
 
+config VIDEO_VIA_CAMERA
+       tristate "VIAFB camera controller support"
+       depends on FB_VIA
+       select VIDEOBUF_DMA_SG
+       select VIDEO_OV7670
+       help
+          Driver support for the integrated camera controller in VIA
+          Chrome9 chipsets.  Currently only tested on OLPC xo-1.5 systems
+          with ov7670 sensors.
+
+#
+# Platform multimedia device configuration
+#
+
+source "drivers/media/video/davinci/Kconfig"
+
+source "drivers/media/video/omap/Kconfig"
+
+config VIDEO_SH_VOU
+       tristate "SuperH VOU video output driver"
+       depends on VIDEO_DEV && ARCH_SHMOBILE
+       select VIDEOBUF_DMA_CONTIG
+       help
+         Support for the Video Output Unit (VOU) on SuperH SoCs.
+
+config VIDEO_VIU
+       tristate "Freescale VIU Video Driver"
+       depends on VIDEO_V4L2 && PPC_MPC512x
+       select VIDEOBUF_DMA_CONTIG
+       default y
+       ---help---
+         Support for Freescale VIU video driver. This device captures
+         video data, or overlays video on DIU frame buffer.
+
+         Say Y here if you want to enable VIU device on MPC5121e Rev2+.
+         In doubt, say N.
+
+config VIDEO_TIMBERDALE
+       tristate "Support for timberdale Video In/LogiWIN"
+       depends on VIDEO_V4L2 && I2C && DMADEVICES
+       select DMA_ENGINE
+       select TIMB_DMA
+       select VIDEO_ADV7180
+       select VIDEOBUF_DMA_CONTIG
+       ---help---
+         Add support for the Video In peripherial of the timberdale FPGA.
+
+config VIDEO_VINO
+       tristate "SGI Vino Video For Linux"
+       depends on I2C && SGI_IP22 && VIDEO_V4L2
+       select VIDEO_SAA7191 if VIDEO_HELPER_CHIPS_AUTO
+       help
+         Say Y here to build in support for the Vino video input system found
+         on SGI Indy machines.
+
 config VIDEO_M32R_AR
        tristate "AR devices"
        depends on M32R && VIDEO_V4L2
@@ -863,16 +877,6 @@ config VIDEO_M32R_AR_M64278
          To compile this driver as a module, choose M here: the
          module will be called arv.
 
-config VIDEO_VIA_CAMERA
-       tristate "VIAFB camera controller support"
-       depends on FB_VIA
-       select VIDEOBUF_DMA_SG
-       select VIDEO_OV7670
-       help
-          Driver support for the integrated camera controller in VIA
-          Chrome9 chipsets.  Currently only tested on OLPC xo-1.5 systems
-          with ov7670 sensors.
-
 config VIDEO_OMAP3
        tristate "OMAP 3 Camera support (EXPERIMENTAL)"
        depends on OMAP_IOVMM && VIDEO_V4L2 && I2C && VIDEO_V4L2_SUBDEV_API && ARCH_OMAP3 && EXPERIMENTAL