Bluetooth: btmrvl: support Marvell Bluetooth device SD8787

The SD8787 firmware image is shared with mwifiex driver.
Whoever gets loaded first will be responsible for firmware
downloading.

Signed-off-by: Kevin Gan <ganhy@marvell.com>
Signed-off-by: Tristan Xu <xurf@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 8e0de9a058673e401cf50ae06c1a2a7f97eb2be3..11b41fd40c275b0f61aa77120dfab5b14219564a 100644 (file)
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -188,7 +188,7 @@ config BT_MRVL
          The core driver to support Marvell Bluetooth devices.
 
          This driver is required if you want to support
-         Marvell Bluetooth devices, such as 8688.
+         Marvell Bluetooth devices, such as 8688/8787.
 
          Say Y here to compile Marvell Bluetooth driver
          into the kernel or say M to compile it as module.
@@ -201,7 +201,7 @@ config BT_MRVL_SDIO
          The driver for Marvell Bluetooth chipsets with SDIO interface.
 
          This driver is required if you want to use Marvell Bluetooth
-         devices with SDIO interface. Currently only SD8688 chipset is
+         devices with SDIO interface. Currently SD8688/SD8787 chipsets are
          supported.
 
          Say Y here to compile support for Marvell BT-over-SDIO driver

diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index dcc2a6ec23f00eb191bda5047387de18eb71d923..7f521d4ac657e13764e9917fd45f393b0933eee3 100644 (file)
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -49,15 +49,59 @@
 static u8 user_rmmod;
 static u8 sdio_ireg;
 
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8688 = {
+       .cfg = 0x03,
+       .host_int_mask = 0x04,
+       .host_intstatus = 0x05,
+       .card_status = 0x20,
+       .sq_read_base_addr_a0 = 0x10,
+       .sq_read_base_addr_a1 = 0x11,
+       .card_fw_status0 = 0x40,
+       .card_fw_status1 = 0x41,
+       .card_rx_len = 0x42,
+       .card_rx_unit = 0x43,
+       .io_port_0 = 0x00,
+       .io_port_1 = 0x01,
+       .io_port_2 = 0x02,
+};
+static const struct btmrvl_sdio_card_reg btmrvl_reg_8787 = {
+       .cfg = 0x00,
+       .host_int_mask = 0x02,
+       .host_intstatus = 0x03,
+       .card_status = 0x30,
+       .sq_read_base_addr_a0 = 0x40,
+       .sq_read_base_addr_a1 = 0x41,
+       .card_revision = 0x5c,
+       .card_fw_status0 = 0x60,
+       .card_fw_status1 = 0x61,
+       .card_rx_len = 0x62,
+       .card_rx_unit = 0x63,
+       .io_port_0 = 0x78,
+       .io_port_1 = 0x79,
+       .io_port_2 = 0x7a,
+};
+
 static const struct btmrvl_sdio_device btmrvl_sdio_sd6888 = {
        .helper         = "sd8688_helper.bin",
        .firmware       = "sd8688.bin",
+       .reg            = &btmrvl_reg_8688,
+       .sd_blksz_fw_dl = 64,
+};
+
+static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = {
+       .helper         = NULL,
+       .firmware       = "mrvl/sd8787_uapsta.bin",
+       .reg            = &btmrvl_reg_8787,
+       .sd_blksz_fw_dl = 256,
 };
 
 static const struct sdio_device_id btmrvl_sdio_ids[] = {
        /* Marvell SD8688 Bluetooth device */
        { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x9105),
                        .driver_data = (unsigned long) &btmrvl_sdio_sd6888 },
+       /* Marvell SD8787 Bluetooth device */
+       { SDIO_DEVICE(SDIO_VENDOR_ID_MARVELL, 0x911A),
+                       .driver_data = (unsigned long) &btmrvl_sdio_sd8787 },
 
        { }     /* Terminating entry */
 };
@@ -69,7 +113,7 @@ static int btmrvl_sdio_get_rx_unit(struct btmrvl_sdio_card *card)
        u8 reg;
        int ret;
 
-       reg = sdio_readb(card->func, CARD_RX_UNIT_REG, &ret);
+       reg = sdio_readb(card->func, card->reg->card_rx_unit, &ret);
        if (!ret)
                card->rx_unit = reg;
 
@@ -83,11 +127,11 @@ static int btmrvl_sdio_read_fw_status(struct btmrvl_sdio_card *card, u16 *dat)
 
        *dat = 0;
 
-       fws0 = sdio_readb(card->func, CARD_FW_STATUS0_REG, &ret);
+       fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
        if (ret)
                return -EIO;
 
-       fws1 = sdio_readb(card->func, CARD_FW_STATUS1_REG, &ret);
+       fws1 = sdio_readb(card->func, card->reg->card_fw_status1, &ret);
        if (ret)
                return -EIO;
 
@@ -101,7 +145,7 @@ static int btmrvl_sdio_read_rx_len(struct btmrvl_sdio_card *card, u16 *dat)
        u8 reg;
        int ret;
 
-       reg = sdio_readb(card->func, CARD_RX_LEN_REG, &ret);
+       reg = sdio_readb(card->func, card->reg->card_rx_len, &ret);
        if (!ret)
                *dat = (u16) reg << card->rx_unit;
 
@@ -113,7 +157,7 @@ static int btmrvl_sdio_enable_host_int_mask(struct btmrvl_sdio_card *card,
 {
        int ret;
 
-       sdio_writeb(card->func, mask, HOST_INT_MASK_REG, &ret);
+       sdio_writeb(card->func, mask, card->reg->host_int_mask, &ret);
        if (ret) {
                BT_ERR("Unable to enable the host interrupt!");
                ret = -EIO;
@@ -128,13 +172,13 @@ static int btmrvl_sdio_disable_host_int_mask(struct btmrvl_sdio_card *card,
        u8 host_int_mask;
        int ret;
 
-       host_int_mask = sdio_readb(card->func, HOST_INT_MASK_REG, &ret);
+       host_int_mask = sdio_readb(card->func, card->reg->host_int_mask, &ret);
        if (ret)
                return -EIO;
 
        host_int_mask &= ~mask;
 
-       sdio_writeb(card->func, host_int_mask, HOST_INT_MASK_REG, &ret);
+       sdio_writeb(card->func, host_int_mask, card->reg->host_int_mask, &ret);
        if (ret < 0) {
                BT_ERR("Unable to disable the host interrupt!");
                return -EIO;
@@ -150,7 +194,7 @@ static int btmrvl_sdio_poll_card_status(struct btmrvl_sdio_card *card, u8 bits)
        int ret;
 
        for (tries = 0; tries < MAX_POLL_TRIES * 1000; tries++) {
-               status = sdio_readb(card->func, CARD_STATUS_REG, &ret);
+               status = sdio_readb(card->func, card->reg->card_status, &ret);
                if (ret)
                        goto failed;
                if ((status & bits) == bits)
@@ -299,7 +343,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
        u8 base0, base1;
        void *tmpfwbuf = NULL;
        u8 *fwbuf;
-       u16 len;
+       u16 len, blksz_dl = card->sd_blksz_fw_dl;
        int txlen = 0, tx_blocks = 0, count = 0;
 
        ret = request_firmware(&fw_firmware, card->firmware,
@@ -345,7 +389,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
 
                for (tries = 0; tries < MAX_POLL_TRIES; tries++) {
                        base0 = sdio_readb(card->func,
-                                       SQ_READ_BASE_ADDRESS_A0_REG, &ret);
+                                       card->reg->sq_read_base_addr_a0, &ret);
                        if (ret) {
                                BT_ERR("BASE0 register read failed:"
                                        " base0 = 0x%04X(%d)."
@@ -355,7 +399,7 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
                                goto done;
                        }
                        base1 = sdio_readb(card->func,
-                                       SQ_READ_BASE_ADDRESS_A1_REG, &ret);
+                                       card->reg->sq_read_base_addr_a1, &ret);
                        if (ret) {
                                BT_ERR("BASE1 register read failed:"
                                        " base1 = 0x%04X(%d)."
@@ -403,20 +447,19 @@ static int btmrvl_sdio_download_fw_w_helper(struct btmrvl_sdio_card *card)
                        if (firmwarelen - offset < txlen)
                                txlen = firmwarelen - offset;
 
-                       tx_blocks =
-                           (txlen + SDIO_BLOCK_SIZE - 1) / SDIO_BLOCK_SIZE;
+                       tx_blocks = (txlen + blksz_dl - 1) / blksz_dl;
 
                        memcpy(fwbuf, &firmware[offset], txlen);
                }
 
                ret = sdio_writesb(card->func, card->ioport, fwbuf,
-                                       tx_blocks * SDIO_BLOCK_SIZE);
+                                               tx_blocks * blksz_dl);
 
                if (ret < 0) {
                        BT_ERR("FW download, writesb(%d) failed @%d",
                                                        count, offset);
-                       sdio_writeb(card->func, HOST_CMD53_FIN, CONFIG_REG,
-                                                                       &ret);
+                       sdio_writeb(card->func, HOST_CMD53_FIN,
+                                               card->reg->cfg, &ret);
                        if (ret)
                                BT_ERR("writeb failed (CFG)");
                }
@@ -597,7 +640,7 @@ static void btmrvl_sdio_interrupt(struct sdio_func *func)
 
        priv = card->priv;
 
-       ireg = sdio_readb(card->func, HOST_INTSTATUS_REG, &ret);
+       ireg = sdio_readb(card->func, card->reg->host_intstatus, &ret);
        if (ret) {
                BT_ERR("sdio_readb: read int status register failed");
                return;
@@ -613,7 +656,7 @@ static void btmrvl_sdio_interrupt(struct sdio_func *func)
 
                sdio_writeb(card->func, ~(ireg) & (DN_LD_HOST_INT_STATUS |
                                        UP_LD_HOST_INT_STATUS),
-                               HOST_INTSTATUS_REG, &ret);
+                               card->reg->host_intstatus, &ret);
                if (ret) {
                        BT_ERR("sdio_writeb: clear int status register failed");
                        return;
@@ -664,7 +707,7 @@ static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
                goto release_irq;
        }
 
-       reg = sdio_readb(func, IO_PORT_0_REG, &ret);
+       reg = sdio_readb(func, card->reg->io_port_0, &ret);
        if (ret < 0) {
                ret = -EIO;
                goto release_irq;
@@ -672,7 +715,7 @@ static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
 
        card->ioport = reg;
 
-       reg = sdio_readb(func, IO_PORT_1_REG, &ret);
+       reg = sdio_readb(func, card->reg->io_port_1, &ret);
        if (ret < 0) {
                ret = -EIO;
                goto release_irq;
@@ -680,7 +723,7 @@ static int btmrvl_sdio_register_dev(struct btmrvl_sdio_card *card)
 
        card->ioport |= (reg << 8);
 
-       reg = sdio_readb(func, IO_PORT_2_REG, &ret);
+       reg = sdio_readb(func, card->reg->io_port_2, &ret);
        if (ret < 0) {
                ret = -EIO;
                goto release_irq;
@@ -815,6 +858,8 @@ exit:
 static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
 {
        int ret = 0;
+       u8 fws0;
+       int pollnum = MAX_POLL_TRIES;
 
        if (!card || !card->func) {
                BT_ERR("card or function is NULL!");
@@ -827,20 +872,36 @@ static int btmrvl_sdio_download_fw(struct btmrvl_sdio_card *card)
                goto done;
        }
 
-       ret = btmrvl_sdio_download_helper(card);
+       /* Check if other function driver is downloading the firmware */
+       fws0 = sdio_readb(card->func, card->reg->card_fw_status0, &ret);
        if (ret) {
-               BT_ERR("Failed to download helper!");
+               BT_ERR("Failed to read FW downloading status!");
                ret = -EIO;
                goto done;
        }
+       if (fws0) {
+               BT_DBG("BT not the winner (%#x). Skip FW downloading", fws0);
+
+               /* Give other function more time to download the firmware */
+               pollnum *= 10;
+       } else {
+               if (card->helper) {
+                       ret = btmrvl_sdio_download_helper(card);
+                       if (ret) {
+                               BT_ERR("Failed to download helper!");
+                               ret = -EIO;
+                               goto done;
+                       }
+               }
 
-       if (btmrvl_sdio_download_fw_w_helper(card)) {
-               BT_ERR("Failed to download firmware!");
-               ret = -EIO;
-               goto done;
+               if (btmrvl_sdio_download_fw_w_helper(card)) {
+                       BT_ERR("Failed to download firmware!");
+                       ret = -EIO;
+                       goto done;
+               }
        }
 
-       if (btmrvl_sdio_verify_fw_download(card, MAX_POLL_TRIES)) {
+       if (btmrvl_sdio_verify_fw_download(card, pollnum)) {
                BT_ERR("FW failed to be active in time!");
                ret = -ETIMEDOUT;
                goto done;
@@ -864,7 +925,7 @@ static int btmrvl_sdio_wakeup_fw(struct btmrvl_private *priv)
 
        sdio_claim_host(card->func);
 
-       sdio_writeb(card->func, HOST_POWER_UP, CONFIG_REG, &ret);
+       sdio_writeb(card->func, HOST_POWER_UP, card->reg->cfg, &ret);
 
        sdio_release_host(card->func);
 
@@ -893,8 +954,10 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
 
        if (id->driver_data) {
                struct btmrvl_sdio_device *data = (void *) id->driver_data;
-               card->helper   = data->helper;
+               card->helper = data->helper;
                card->firmware = data->firmware;
+               card->reg = data->reg;
+               card->sd_blksz_fw_dl = data->sd_blksz_fw_dl;
        }
 
        if (btmrvl_sdio_register_dev(card) < 0) {
@@ -1011,3 +1074,4 @@ MODULE_VERSION(VERSION);
 MODULE_LICENSE("GPL v2");
 MODULE_FIRMWARE("sd8688_helper.bin");
 MODULE_FIRMWARE("sd8688.bin");
+MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin");

diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h
index 27329f107e5a26520aafd15d6f2fc7f5d2be3736..43d35a609ca9a94795afb731d230fa88ca109bef 100644 (file)
--- a/drivers/bluetooth/btmrvl_sdio.h
+++ b/drivers/bluetooth/btmrvl_sdio.h
@@ -47,44 +47,46 @@
 /* Max retry number of CMD53 write */
 #define MAX_WRITE_IOMEM_RETRY          2
 
-/* Host Control Registers */
-#define IO_PORT_0_REG                  0x00
-#define IO_PORT_1_REG                  0x01
-#define IO_PORT_2_REG                  0x02
-
-#define CONFIG_REG                     0x03
-#define HOST_POWER_UP                  BIT(1)
-#define HOST_CMD53_FIN                 BIT(2)
-
-#define HOST_INT_MASK_REG              0x04
-#define HIM_DISABLE                    0xff
-#define HIM_ENABLE                     (BIT(0) | BIT(1))
-
-#define HOST_INTSTATUS_REG             0x05
-#define UP_LD_HOST_INT_STATUS          BIT(0)
-#define DN_LD_HOST_INT_STATUS          BIT(1)
-
-/* Card Control Registers */
-#define SQ_READ_BASE_ADDRESS_A0_REG    0x10
-#define SQ_READ_BASE_ADDRESS_A1_REG    0x11
-
-#define CARD_STATUS_REG                0x20
-#define DN_LD_CARD_RDY                 BIT(0)
-#define CARD_IO_READY                  BIT(3)
-
-#define CARD_FW_STATUS0_REG            0x40
-#define CARD_FW_STATUS1_REG            0x41
-#define FIRMWARE_READY                 0xfedc
-
-#define CARD_RX_LEN_REG                        0x42
-#define CARD_RX_UNIT_REG               0x43
-
+/* register bitmasks */
+#define HOST_POWER_UP                          BIT(1)
+#define HOST_CMD53_FIN                         BIT(2)
+
+#define HIM_DISABLE                            0xff
+#define HIM_ENABLE                             (BIT(0) | BIT(1))
+
+#define UP_LD_HOST_INT_STATUS                  BIT(0)
+#define DN_LD_HOST_INT_STATUS                  BIT(1)
+
+#define DN_LD_CARD_RDY                         BIT(0)
+#define CARD_IO_READY                          BIT(3)
+
+#define FIRMWARE_READY                         0xfedc
+
+
+struct btmrvl_sdio_card_reg {
+       u8 cfg;
+       u8 host_int_mask;
+       u8 host_intstatus;
+       u8 card_status;
+       u8 sq_read_base_addr_a0;
+       u8 sq_read_base_addr_a1;
+       u8 card_revision;
+       u8 card_fw_status0;
+       u8 card_fw_status1;
+       u8 card_rx_len;
+       u8 card_rx_unit;
+       u8 io_port_0;
+       u8 io_port_1;
+       u8 io_port_2;
+};
 
 struct btmrvl_sdio_card {
        struct sdio_func *func;
        u32 ioport;
        const char *helper;
        const char *firmware;
+       const struct btmrvl_sdio_card_reg *reg;
+       u16 sd_blksz_fw_dl;
        u8 rx_unit;
        struct btmrvl_private *priv;
 };
@@ -92,6 +94,8 @@ struct btmrvl_sdio_card {
 struct btmrvl_sdio_device {
        const char *helper;
        const char *firmware;
+       const struct btmrvl_sdio_card_reg *reg;
+       u16 sd_blksz_fw_dl;
 };