return TRUE;
}
-static INT LED_Blink(struct bcm_mini_adapter *Adapter, UINT GPIO_Num, UCHAR uiLedIndex,
- ULONG timeout, INT num_of_time, enum bcm_led_events currdriverstate)
+static INT LED_Blink(struct bcm_mini_adapter *Adapter,
+ UINT GPIO_Num,
+ UCHAR uiLedIndex,
+ ULONG timeout,
+ INT num_of_time,
+ enum bcm_led_events currdriverstate)
{
int Status = STATUS_SUCCESS;
bool bInfinite = false;
-static INT LED_Proportional_Blink(struct bcm_mini_adapter *Adapter, UCHAR GPIO_Num_tx,
- UCHAR uiTxLedIndex, UCHAR GPIO_Num_rx, UCHAR uiRxLedIndex,
- enum bcm_led_events currdriverstate)
+static INT LED_Proportional_Blink(struct bcm_mini_adapter *Adapter,
+ UCHAR GPIO_Num_tx,
+ UCHAR uiTxLedIndex,
+ UCHAR GPIO_Num_rx,
+ UCHAR uiRxLedIndex,
+ enum bcm_led_events currdriverstate)
{
/* Initial values of TX and RX packets */
ULONG64 Initial_num_of_packts_tx = 0, Initial_num_of_packts_rx = 0;
* <OSAL_STATUS_CODE>
* -----------------------------------------------------------------------------
*/
-static INT ValidateDSDParamsChecksum(struct bcm_mini_adapter *Adapter, ULONG ulParamOffset,
- USHORT usParamLen)
+static INT ValidateDSDParamsChecksum(struct bcm_mini_adapter *Adapter,
+ ULONG ulParamOffset,
+ USHORT usParamLen)
{
INT Status = STATUS_SUCCESS;
PUCHAR puBuffer = NULL;
USHORT usChecksumCalculated = 0;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
- "LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X",
- ulParamOffset, usParamLen);
+ "LED Thread:ValidateDSDParamsChecksum: 0x%lx 0x%X",
+ ulParamOffset, usParamLen);
puBuffer = kmalloc(usParamLen, GFP_KERNEL);
if (!puBuffer) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
- DBG_LVL_ALL,
- "LED Thread: ValidateDSDParamsChecksum Allocation failed");
+ DBG_LVL_ALL,
+ "LED Thread: ValidateDSDParamsChecksum Allocation failed");
return -ENOMEM;
}
/* Read the DSD data from the parameter offset. */
if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)puBuffer,
- ulParamOffset, usParamLen)) {
+ ulParamOffset, usParamLen)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
- DBG_LVL_ALL,
- "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
+ DBG_LVL_ALL,
+ "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
Status = STATUS_IMAGE_CHECKSUM_MISMATCH;
goto exit;
}
/* Calculate the checksum of the data read from the DSD parameter. */
usChecksumCalculated = CFG_CalculateChecksum(puBuffer, usParamLen);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
- "LED Thread: usCheckSumCalculated = 0x%x\n",
- usChecksumCalculated);
+ "LED Thread: usCheckSumCalculated = 0x%x\n",
+ usChecksumCalculated);
/*
* End of the DSD parameter will have a TWO bytes checksum stored in it.
* Read it and compare with the calculated Checksum.
*/
if (STATUS_SUCCESS != BeceemNVMRead(Adapter, (PUINT)&usChksmOrg,
- ulParamOffset+usParamLen, 2)) {
+ ulParamOffset+usParamLen, 2)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
- DBG_LVL_ALL,
- "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
+ DBG_LVL_ALL,
+ "LED Thread: ValidateDSDParamsChecksum BeceemNVMRead failed");
Status = STATUS_IMAGE_CHECKSUM_MISMATCH;
goto exit;
}
usChksmOrg = ntohs(usChksmOrg);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
- "LED Thread: usChksmOrg = 0x%x", usChksmOrg);
+ "LED Thread: usChksmOrg = 0x%x", usChksmOrg);
/*
* Compare the checksum calculated with the checksum read
*/
if (usChecksumCalculated ^ usChksmOrg) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
- DBG_LVL_ALL,
- "LED Thread: ValidateDSDParamsChecksum: Checksums don't match");
+ DBG_LVL_ALL,
+ "LED Thread: ValidateDSDParamsChecksum: Checksums don't match");
Status = STATUS_IMAGE_CHECKSUM_MISMATCH;
goto exit;
}
* <OSAL_STATUS_CODE>
* -----------------------------------------------------------------------------
*/
-static INT ValidateHWParmStructure(struct bcm_mini_adapter *Adapter, ULONG ulHwParamOffset)
+static INT ValidateHWParmStructure(struct bcm_mini_adapter *Adapter,
+ ULONG ulHwParamOffset)
{
INT Status = STATUS_SUCCESS;
return STATUS_IMAGE_CHECKSUM_MISMATCH;
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
- "LED Thread:HwParamLen = 0x%x", HwParamLen);
+ "LED Thread:HwParamLen = 0x%x", HwParamLen);
Status = ValidateDSDParamsChecksum(Adapter, ulHwParamOffset,
- HwParamLen);
+ HwParamLen);
return Status;
} /* ValidateHWParmStructure() */
UCHAR ucGPIOInfo[32] = {0};
BeceemNVMRead(Adapter, (PUINT)&usEEPROMVersion,
- EEPROM_VERSION_OFFSET, 2);
+ EEPROM_VERSION_OFFSET, 2);
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
- "usEEPROMVersion: Minor:0x%X Major:0x%x",
- usEEPROMVersion&0xFF, ((usEEPROMVersion>>8)&0xFF));
+ "usEEPROMVersion: Minor:0x%X Major:0x%x",
+ usEEPROMVersion & 0xFF,
+ ((usEEPROMVersion >> 8) & 0xFF));
if (((usEEPROMVersion>>8)&0xFF) < EEPROM_MAP5_MAJORVERSION) {
BeceemNVMRead(Adapter, (PUINT)&usHwParamData,
- EEPROM_HW_PARAM_POINTER_ADDRESS, 2);
+ EEPROM_HW_PARAM_POINTER_ADDRESS, 2);
usHwParamData = ntohs(usHwParamData);
dwReadValue = usHwParamData;
} else {
* if compatibility section is valid.
*/
Status = ValidateDSDParamsChecksum(Adapter,
- DSD_START_OFFSET,
- COMPATIBILITY_SECTION_LENGTH_MAP5);
+ DSD_START_OFFSET,
+ COMPATIBILITY_SECTION_LENGTH_MAP5);
if (Status != STATUS_SUCCESS)
return Status;
BeceemNVMRead(Adapter, (PUINT)&dwReadValue,
- EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5, 4);
+ EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5, 4);
dwReadValue = ntohl(dwReadValue);
}
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
- "LED Thread: Start address of HW_PARAM structure = 0x%lx",
- dwReadValue);
+ "LED Thread: Start address of HW_PARAM structure = 0x%lx",
+ dwReadValue);
/*
* Validate if the address read out is within the DSD.
* To read GPIO section, add GPIO offset further.
*/
- dwReadValue +=
- DSD_START_OFFSET; /* = start address of hw param section. */
+ dwReadValue += DSD_START_OFFSET;
+ /* = start address of hw param section. */
dwReadValue += GPIO_SECTION_START_OFFSET;
/* = GPIO start offset within HW Param section. */
}
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
- "GPIO's bit map correspond to LED :0x%X", Adapter->gpioBitMap);
+ "GPIO's bit map correspond to LED :0x%X",
+ Adapter->gpioBitMap);
return Status;
}
static int ReadConfigFileStructure(struct bcm_mini_adapter *Adapter,
- bool *bEnableThread)
+ bool *bEnableThread)
{
int Status = STATUS_SUCCESS;
/* Array to store GPIO numbers from EEPROM */
memset(GPIO_Array, DISABLE_GPIO_NUM, NUM_OF_LEDS+1);
if (!Adapter->pstargetparams || IS_ERR(Adapter->pstargetparams)) {
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
- DBG_LVL_ALL, "Target Params not Avail.\n");
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL, "Target Params not Avail.\n");
return -ENOENT;
}
* uiFileNameBufferSize
*/
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO, DBG_LVL_ALL,
- "LED Thread: Config file read successfully\n");
+ "LED Thread: Config file read successfully\n");
puCFGData = (PUCHAR) &Adapter->pstargetparams->HostDrvrConfig1;
/*
* dont launch the LED control thread.
*/
for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
- if ((Adapter->LEDInfo.LEDState[uiIndex].LED_Type == DISABLE_GPIO_NUM) ||
+ if ((Adapter->LEDInfo.LEDState[uiIndex].LED_Type ==
+ DISABLE_GPIO_NUM) ||
(Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0x7f) ||
(Adapter->LEDInfo.LEDState[uiIndex].LED_Type == 0))
uiNum_of_LED_Type++;
/* Set all LED GPIO Mode to output mode */
if (rdmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue,
- sizeof(uiResetValue)) < 0)
+ sizeof(uiResetValue)) < 0)
BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
DBG_LVL_ALL, "LED Thread: RDM Failed\n");
for (uiIndex = 0; uiIndex < NUM_OF_LEDS; uiIndex++) {
uiIndex);
}
if (wrmalt(Adapter, GPIO_MODE_REGISTER, &uiResetValue,
- sizeof(uiResetValue)) < 0)
- BCM_DEBUG_PRINT (Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
- DBG_LVL_ALL, "LED Thread: WRM Failed\n");
+ sizeof(uiResetValue)) < 0)
+ BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
+ DBG_LVL_ALL, "LED Thread: WRM Failed\n");
Adapter->LEDInfo.bIdle_led_off = false;
}
-static INT BcmGetGPIOPinInfo(struct bcm_mini_adapter *Adapter, UCHAR *GPIO_num_tx,
- UCHAR *GPIO_num_rx, UCHAR *uiLedTxIndex, UCHAR *uiLedRxIndex,
- enum bcm_led_events currdriverstate)
+static INT BcmGetGPIOPinInfo(struct bcm_mini_adapter *Adapter,
+ UCHAR *GPIO_num_tx,
+ UCHAR *GPIO_num_rx,
+ UCHAR *uiLedTxIndex,
+ UCHAR *uiLedRxIndex,
+ enum bcm_led_events currdriverstate)
{
UINT uiIndex = 0;
}
return STATUS_SUCCESS;
}
+
static VOID LEDControlThread(struct bcm_mini_adapter *Adapter)
{
UINT uiIndex = 0;
currdriverstate = DRIVER_INIT;
/* Adapter->DriverState; */
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum,
- &uiLedIndex, &dummyIndex, currdriverstate);
+ &uiLedIndex, &dummyIndex,
+ currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
*/
currdriverstate = FW_DOWNLOAD;
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum,
- &uiLedIndex, &dummyIndex, currdriverstate);
+ &uiLedIndex, &dummyIndex,
+ currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM) {
timeout = 50;
LED_Blink(Adapter, 1 << GPIO_num, uiLedIndex,
- timeout, -1, currdriverstate);
+ timeout, -1, currdriverstate);
}
break;
case FW_DOWNLOAD_DONE:
currdriverstate = FW_DOWNLOAD_DONE;
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum,
- &uiLedIndex, &dummyIndex, currdriverstate);
+ &uiLedIndex, &dummyIndex,
+ currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
break;
case NO_NETWORK_ENTRY:
currdriverstate = NO_NETWORK_ENTRY;
BcmGetGPIOPinInfo(Adapter, &GPIO_num, &dummyGPIONum,
- &uiLedIndex, &dummyGPIONum, currdriverstate);
+ &uiLedIndex, &dummyGPIONum,
+ currdriverstate);
if (GPIO_num != DISABLE_GPIO_NUM)
TURN_ON_LED(1 << GPIO_num, uiLedIndex);
break;
Status = ReadConfigFileStructure(Adapter, &bEnableThread);
if (STATUS_SUCCESS != Status) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
- DBG_LVL_ALL,
- "LED Thread: FAILED in ReadConfigFileStructure\n");
+ DBG_LVL_ALL,
+ "LED Thread: FAILED in ReadConfigFileStructure\n");
return Status;
}
Adapter->LEDInfo.bIdle_led_off = false;
Adapter->LEDInfo.led_cntrl_threadid =
kthread_run((int (*)(void *)) LEDControlThread,
- Adapter, "led_control_thread");
+ Adapter, "led_control_thread");
if (IS_ERR(Adapter->LEDInfo.led_cntrl_threadid)) {
BCM_DEBUG_PRINT(Adapter, DBG_TYPE_OTHERS, LED_DUMP_INFO,
- DBG_LVL_ALL,
- "Not able to spawn Kernel Thread\n");
+ DBG_LVL_ALL,
+ "Not able to spawn Kernel Thread\n");
Adapter->LEDInfo.led_thread_running =
BCM_LED_THREAD_DISABLED;
return PTR_ERR(Adapter->LEDInfo.led_cntrl_threadid);
projects / ~emulex / infiniband.git / commitdiff