p54: connect to 11w protected networks

Previously, it was not possible to connect to
networks which requires 11w to be supported by
the stations.

Note:

As all current (and old) firmwares corrupt
incoming, protected management frames, the
decryption offloading needs to be disabled.
This will be done automatically if needed.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c
index 2969d5321ca6b08a67ecf5cbea6c92f300c3ef97..aadda99989c007838faf7eb5ca816d18904ea91c 100644 (file)
--- a/drivers/net/wireless/p54/main.c
+++ b/drivers/net/wireless/p54/main.c
@@ -515,6 +515,17 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd,
        if (modparam_nohwcrypt)
                return -EOPNOTSUPP;
 
+       if (key->flags & IEEE80211_KEY_FLAG_RX_MGMT) {
+               /*
+                * Unfortunately most/all firmwares are trying to decrypt
+                * incoming management frames if a suitable key can be found.
+                * However, in doing so the data in these frames gets
+                * corrupted. So, we can't have firmware supported crypto
+                * offload in this case.
+                */
+               return -EOPNOTSUPP;
+       }
+
        mutex_lock(&priv->conf_mutex);
        if (cmd == SET_KEY) {
                switch (key->cipher) {
@@ -738,6 +749,7 @@ struct ieee80211_hw *p54_init_common(size_t priv_data_len)
                     IEEE80211_HW_SIGNAL_DBM |
                     IEEE80211_HW_SUPPORTS_PS |
                     IEEE80211_HW_PS_NULLFUNC_STACK |
+                    IEEE80211_HW_MFP_CAPABLE |
                     IEEE80211_HW_REPORTS_TX_ACK_STATUS;
 
        dev->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |