INIT_LIST_HEAD(&pbuflist->list);
- icmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
- icmd->un.elsreq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
- icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
- icmd->un.elsreq64.remoteID = did; /* DID */
if (expectRsp) {
+ icmd->un.elsreq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
+ icmd->un.elsreq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
+ icmd->un.elsreq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
icmd->un.elsreq64.bdl.bdeSize = (2 * sizeof(struct ulp_bde64));
+
+ icmd->un.elsreq64.remoteID = did; /* DID */
icmd->ulpCommand = CMD_ELS_REQUEST64_CR;
icmd->ulpTimeout = phba->fc_ratov * 2;
} else {
- icmd->un.elsreq64.bdl.bdeSize = sizeof(struct ulp_bde64);
+ icmd->un.xseq64.bdl.addrHigh = putPaddrHigh(pbuflist->phys);
+ icmd->un.xseq64.bdl.addrLow = putPaddrLow(pbuflist->phys);
+ icmd->un.xseq64.bdl.bdeFlags = BUFF_TYPE_BLP_64;
+ icmd->un.xseq64.bdl.bdeSize = sizeof(struct ulp_bde64);
+ icmd->un.xseq64.xmit_els_remoteID = did; /* DID */
icmd->ulpCommand = CMD_XMIT_ELS_RSP64_CX;
}
icmd->ulpBdeCount = 1;
icmd->ulpLe = 1;
icmd->ulpClass = CLASS3;
- if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
- icmd->un.elsreq64.myID = vport->fc_myDID;
+ /*
+ * If we have NPIV enabled, we want to send ELS traffic by VPI.
+ * For SLI4, since the driver controls VPIs we also want to include
+ * all ELS pt2pt protocol traffic as well.
+ */
+ if ((phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) ||
+ ((phba->sli_rev == LPFC_SLI_REV4) &&
+ (vport->fc_flag & FC_PT2PT))) {
+
+ if (expectRsp) {
+ icmd->un.elsreq64.myID = vport->fc_myDID;
+
+ /* For ELS_REQUEST64_CR, use the VPI by default */
+ icmd->ulpContext = phba->vpi_ids[vport->vpi];
+ }
- /* For ELS_REQUEST64_CR, use the VPI by default */
- icmd->ulpContext = phba->vpi_ids[vport->vpi];
icmd->ulpCt_h = 0;
/* The CT field must be 0=INVALID_RPI for the ECHO cmd */
if (elscmd == ELS_CMD_ECHO)
int rc = 0;
sp = &phba->fc_fabparam;
- /* move forward in case of SLI4 FC port loopback test */
+ /* move forward in case of SLI4 FC port loopback test and pt2pt mode */
if ((phba->sli_rev == LPFC_SLI_REV4) &&
- !(phba->link_flag & LS_LOOPBACK_MODE)) {
+ !(phba->link_flag & LS_LOOPBACK_MODE) &&
+ !(vport->fc_flag & FC_PT2PT)) {
ndlp = lpfc_findnode_did(vport, Fabric_DID);
if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
rc = -ENODEV;
mempool_free(mbox, phba->mbox_mem_pool);
goto fail;
}
+
+ /*
+ * For SLI4, the VFI/VPI are registered AFTER the
+ * Nport with the higher WWPN sends the PLOGI with
+ * an assigned NPortId.
+ */
+
+ /* not equal */
+ if ((phba->sli_rev == LPFC_SLI_REV4) && rc)
+ lpfc_issue_reg_vfi(vport);
+
/* Decrement ndlp reference count indicating that ndlp can be
* safely released when other references to it are done.
*/
return 1;
}
- did = Fabric_DID;
-
if ((lpfc_check_sparm(vport, ndlp, sp, CLASS3, 1))) {
/* For a FLOGI we accept, then if our portname is greater
* then the remote portname we initiate Nport login.
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_PT2PT_PLOGI;
spin_unlock_irq(shost->host_lock);
+
+ /* If we have the high WWPN we can assign our own
+ * myDID; otherwise, we have to WAIT for a PLOGI
+ * from the remote NPort to find out what it
+ * will be.
+ */
vport->fc_myDID = PT2PT_LocalID;
- } else
- vport->fc_myDID = PT2PT_RemoteID;
- vport->port_state = LPFC_FLOGI;
+ }
+
+ /*
+ * The vport state should go to LPFC_FLOGI only
+ * AFTER we issue a FLOGI, not receive one.
+ */
spin_lock_irq(shost->host_lock);
vport->fc_flag |= FC_PT2PT;
vport->fc_flag &= ~(FC_FABRIC | FC_PUBLIC_LOOP);
spin_unlock_irq(shost->host_lock);
+
+ /*
+ * We temporarily set fc_myDID to make it look like we are
+ * a Fabric. This is done just so we end up with the right
+ * did / sid on the FLOGI ACC rsp.
+ */
+ did = vport->fc_myDID;
+ vport->fc_myDID = Fabric_DID;
+
} else {
/* Reject this request because invalid parameters */
stat.un.b.lsRjtRsvd0 = 0;
stat.un.b.lsRjtRsnCode = LSRJT_UNABLE_TPC;
stat.un.b.lsRjtRsnCodeExp = LSEXP_SPARM_OPTIONS;
stat.un.b.vendorUnique = 0;
+
+ /*
+ * We temporarily set fc_myDID to make it look like we are
+ * a Fabric. This is done just so we end up with the right
+ * did / sid on the FLOGI LS_RJT rsp.
+ */
+ did = vport->fc_myDID;
+ vport->fc_myDID = Fabric_DID;
+
lpfc_els_rsp_reject(vport, stat.un.lsRjtError, cmdiocb, ndlp,
NULL);
+
+ /* Now lets put fc_myDID back to what its supposed to be */
+ vport->fc_myDID = did;
+
return 1;
}
/* Send back ACC */
lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, NULL);
+ /* Now lets put fc_myDID back to what its supposed to be */
+ vport->fc_myDID = did;
+
if (!(vport->fc_flag & FC_PT2PT_PLOGI)) {
+
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
if (!mbox)
goto fail;
}
if (vport->port_state == LPFC_FABRIC_CFG_LINK) {
- /* For private loop just start discovery and we are done. */
- if ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
- !(vport->fc_flag & FC_PUBLIC_LOOP)) {
+ /*
+ * For private loop or for NPort pt2pt,
+ * just start discovery and we are done.
+ */
+ if ((vport->fc_flag & FC_PT2PT) ||
+ ((phba->fc_topology == LPFC_TOPOLOGY_LOOP) &&
+ !(vport->fc_flag & FC_PUBLIC_LOOP))) {
+
/* Use loop map to make discovery list */
lpfc_disc_list_loopmap(vport);
/* Start discovery */
ndlp->nlp_DID, ndlp->nlp_flag, ndlp->nlp_type);
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_NODE,
- "0279 lpfc_nlp_release: ndlp:x%p "
+ "0279 lpfc_nlp_release: ndlp:x%p did %x "
"usgmap:x%x refcnt:%d\n",
- (void *)ndlp, ndlp->nlp_usg_map,
+ (void *)ndlp, ndlp->nlp_DID, ndlp->nlp_usg_map,
atomic_read(&ndlp->kref.refcount));
/* remove ndlp from action. */
WORD5 w5; /* Header control/status word */
} XMT_SEQ_FIELDS64;
+/* This word is remote ports D_ID for XMIT_ELS_RSP64 */
+#define xmit_els_remoteID xrsqRo
+
/* IOCB Command template for 64 bit RCV_SEQUENCE64 */
typedef struct {
struct ulp_bde64 rcvBde;
struct xmit_els_rsp64_wqe {
struct ulp_bde64 bde;
uint32_t response_payload_len;
- uint32_t rsvd4;
+ uint32_t word4;
+#define els_rsp64_sid_SHIFT 0
+#define els_rsp64_sid_MASK 0x00FFFFFF
+#define els_rsp64_sid_WORD word4
+#define els_rsp64_sp_SHIFT 24
+#define els_rsp64_sp_MASK 0x00000001
+#define els_rsp64_sp_WORD word4
struct wqe_did wqe_dest;
struct wqe_common wqe_com; /* words 6-11 */
uint32_t word12;
return 1;
}
+ /* Check for Nport to NPort pt2pt protocol */
if ((vport->fc_flag & FC_PT2PT) &&
!(vport->fc_flag & FC_PT2PT_PLOGI)) {
+
/* rcv'ed PLOGI decides what our NPortId will be */
vport->fc_myDID = icmd->un.rcvels.parmRo;
mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
mempool_free(mbox, phba->mbox_mem_pool);
goto out;
}
+ /*
+ * For SLI4, the VFI/VPI are registered AFTER the
+ * Nport with the higher WWPN sends us a PLOGI with
+ * our assigned NPortId.
+ */
+ if (phba->sli_rev == LPFC_SLI_REV4)
+ lpfc_issue_reg_vfi(vport);
lpfc_can_disctmo(vport);
}
bf_set(els_req64_sp, &wqe->els_req, 1);
bf_set(els_req64_sid, &wqe->els_req,
iocbq->vport->fc_myDID);
+ if ((*pcmd == ELS_CMD_FLOGI) &&
+ !(phba->fc_topology ==
+ LPFC_TOPOLOGY_LOOP))
+ bf_set(els_req64_sid, &wqe->els_req, 0);
bf_set(wqe_ct, &wqe->els_req.wqe_com, 1);
bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
phba->vpi_ids[iocbq->vport->vpi]);
/* words0-2 BDE memcpy */
/* word3 iocb=iotag32 wqe=response_payload_len */
wqe->xmit_els_rsp.response_payload_len = xmit_len;
- /* word4 iocb=did wge=rsvd. */
- wqe->xmit_els_rsp.rsvd4 = 0;
+ /* word4 */
+ wqe->xmit_els_rsp.word4 = 0;
/* word5 iocb=rsvd wge=did */
bf_set(wqe_els_did, &wqe->xmit_els_rsp.wqe_dest,
- iocbq->iocb.un.elsreq64.remoteID);
+ iocbq->iocb.un.xseq64.xmit_els_remoteID);
+
+ if_type = bf_get(lpfc_sli_intf_if_type,
+ &phba->sli4_hba.sli_intf);
+ if (if_type == LPFC_SLI_INTF_IF_TYPE_2) {
+ if (iocbq->vport->fc_flag & FC_PT2PT) {
+ bf_set(els_rsp64_sp, &wqe->xmit_els_rsp, 1);
+ bf_set(els_rsp64_sid, &wqe->xmit_els_rsp,
+ iocbq->vport->fc_myDID);
+ if (iocbq->vport->fc_myDID == Fabric_DID) {
+ bf_set(wqe_els_did,
+ &wqe->xmit_els_rsp.wqe_dest, 0);
+ }
+ }
+ }
bf_set(wqe_ct, &wqe->xmit_els_rsp.wqe_com,
((iocbq->iocb.ulpCt_h << 1) | iocbq->iocb.ulpCt_l));
bf_set(wqe_pu, &wqe->xmit_els_rsp.wqe_com, iocbq->iocb.ulpPU);
pcmd = (uint32_t *) (((struct lpfc_dmabuf *)
iocbq->context2)->virt);
if (phba->fc_topology == LPFC_TOPOLOGY_LOOP) {
- bf_set(els_req64_sp, &wqe->els_req, 1);
- bf_set(els_req64_sid, &wqe->els_req,
+ bf_set(els_rsp64_sp, &wqe->xmit_els_rsp, 1);
+ bf_set(els_rsp64_sid, &wqe->xmit_els_rsp,
iocbq->vport->fc_myDID);
- bf_set(wqe_ct, &wqe->els_req.wqe_com, 1);
- bf_set(wqe_ctxt_tag, &wqe->els_req.wqe_com,
+ bf_set(wqe_ct, &wqe->xmit_els_rsp.wqe_com, 1);
+ bf_set(wqe_ctxt_tag, &wqe->xmit_els_rsp.wqe_com,
phba->vpi_ids[phba->pport->vpi]);
}
command_type = OTHER_COMMAND;
uint32_t did = (fc_hdr->fh_d_id[0] << 16 |
fc_hdr->fh_d_id[1] << 8 |
fc_hdr->fh_d_id[2]);
+
if (did == Fabric_DID)
return phba->pport;
+ if ((phba->pport->fc_flag & FC_PT2PT) &&
+ !(phba->link_state == LPFC_HBA_READY))
+ return phba->pport;
+
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
for (i = 0; i <= phba->max_vpi && vports[i] != NULL; i++) {
/* Initialize the first IOCB. */
first_iocbq->iocb.unsli3.rcvsli3.acc_len = 0;
first_iocbq->iocb.ulpStatus = IOSTAT_SUCCESS;
- first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX;
+
+ /* Check FC Header to see what TYPE of frame we are rcv'ing */
+ if (sli4_type_from_fc_hdr(fc_hdr) == FC_TYPE_ELS) {
+ first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_ELS64_CX;
+ first_iocbq->iocb.un.rcvels.parmRo =
+ sli4_did_from_fc_hdr(fc_hdr);
+ first_iocbq->iocb.ulpPU = PARM_NPIV_DID;
+ } else
+ first_iocbq->iocb.ulpCommand = CMD_IOCB_RCV_SEQ64_CX;
first_iocbq->iocb.ulpContext = NO_XRI;
first_iocbq->iocb.unsli3.rcvsli3.ox_id =
be16_to_cpu(fc_hdr->fh_ox_id);
struct fc_frame_header *fc_hdr;
struct lpfc_vport *vport;
uint32_t fcfi;
+ uint32_t did;
/* Process each received buffer */
fc_hdr = (struct fc_frame_header *)dmabuf->hbuf.virt;
else
fcfi = bf_get(lpfc_rcqe_fcf_id,
&dmabuf->cq_event.cqe.rcqe_cmpl);
+
vport = lpfc_fc_frame_to_vport(phba, fc_hdr, fcfi);
- if (!vport || !(vport->vpi_state & LPFC_VPI_REGISTERED)) {
+ if (!vport) {
/* throw out the frame */
lpfc_in_buf_free(phba, &dmabuf->dbuf);
return;
}
+
+ /* d_id this frame is directed to */
+ did = sli4_did_from_fc_hdr(fc_hdr);
+
+ /* vport is registered unless we rcv a FLOGI directed to Fabric_DID */
+ if (!(vport->vpi_state & LPFC_VPI_REGISTERED) &&
+ (did != Fabric_DID)) {
+ /*
+ * Throw out the frame if we are not pt2pt.
+ * The pt2pt protocol allows for discovery frames
+ * to be received without a registered VPI.
+ */
+ if (!(vport->fc_flag & FC_PT2PT) ||
+ (phba->link_state == LPFC_HBA_READY)) {
+ lpfc_in_buf_free(phba, &dmabuf->dbuf);
+ return;
+ }
+ }
+
/* Handle the basic abort sequence (BA_ABTS) event */
if (fc_hdr->fh_r_ctl == FC_RCTL_BA_ABTS) {
lpfc_sli4_handle_unsol_abort(vport, dmabuf);
(fc_hdr)->fh_s_id[1] << 8 | \
(fc_hdr)->fh_s_id[2])
+#define sli4_did_from_fc_hdr(fc_hdr) \
+ ((fc_hdr)->fh_d_id[0] << 16 | \
+ (fc_hdr)->fh_d_id[1] << 8 | \
+ (fc_hdr)->fh_d_id[2])
+
#define sli4_fctl_from_fc_hdr(fc_hdr) \
((fc_hdr)->fh_f_ctl[0] << 16 | \
(fc_hdr)->fh_f_ctl[1] << 8 | \
(fc_hdr)->fh_f_ctl[2])
+#define sli4_type_from_fc_hdr(fc_hdr) \
+ ((fc_hdr)->fh_type)
+
#define LPFC_FW_RESET_MAXIMUM_WAIT_10MS_CNT 12000
enum lpfc_sli4_queue_type {
projects / ~emulex / infiniband.git / commitdiff