MODULE_LICENSE("Dual BSD/GPL");
MODULE_VERSION("0.6.0 (EXPERIMENTAL)");
-static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
+static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
+ bool skip_pcu);
static int ath5k_beacon_update(struct ieee80211_hw *hw,
struct ieee80211_vif *vif);
static void ath5k_beacon_update_timers(struct ath5k_softc *sc, u64 bc_tsf);
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
- return ath5k_reset(sc, chan);
+ return ath5k_reset(sc, chan, true);
}
static void
if (needreset) {
ATH5K_DBG(sc, ATH5K_DEBUG_RESET,
"TX queues stuck, resetting\n");
- ath5k_reset(sc, sc->curchan);
+ ath5k_reset(sc, NULL, true);
}
ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work,
AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
AR5K_INT_FATAL | AR5K_INT_GLOBAL | AR5K_INT_MIB;
- ret = ath5k_reset(sc, NULL);
+ ret = ath5k_reset(sc, NULL, false);
if (ret)
goto done;
* This should be called with sc->lock.
*/
static int
-ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
+ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan,
+ bool skip_pcu)
{
struct ath5k_hw *ah = sc->ah;
int ret;
sc->curchan = chan;
sc->curband = &sc->sbands[chan->band];
}
- ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL);
+ ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, chan != NULL,
+ skip_pcu);
if (ret) {
ATH5K_ERR(sc, "can't reset hardware (%d)\n", ret);
goto err;
reset_work);
mutex_lock(&sc->lock);
- ath5k_reset(sc, sc->curchan);
+ ath5k_reset(sc, NULL, true);
mutex_unlock(&sc->lock);
}
\*************/
int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
- u8 mode, u8 ee_mode, u8 freq)
+ u8 mode, u8 ee_mode, u8 freq, bool fast)
{
struct ieee80211_channel *curr_channel;
int ret, i;
bool fast_txp;
ret = 0;
+ /*
+ * Sanity check for fast flag
+ * Don't try fast channel change when changing modulation
+ * mode/band. We check for chip compatibility on
+ * ath5k_hw_reset.
+ */
+ curr_channel = ah->ah_current_channel;
+ if (fast && (channel->hw_value != curr_channel->hw_value))
+ return -EINVAL;
+
+ /*
+ * On fast channel change we only set the synth parameters
+ * while PHY is running, enable calibration and skip the rest.
+ */
+ if (fast) {
+ AR5K_REG_ENABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
+ AR5K_PHY_RFBUS_REQ_REQUEST);
+ for (i = 0; i < 100; i++) {
+ if (ath5k_hw_reg_read(ah, AR5K_PHY_RFBUS_GRANT))
+ break;
+ udelay(5);
+ }
+ /* Failed */
+ if (i >= 100)
+ return -EIO;
+ }
+
/*
* If we don't change channel/mode skip
* tx powertable calculation and use the
* cached one.
*/
- curr_channel = ah->ah_current_channel;
if ((channel->hw_value == curr_channel->hw_value) &&
(channel->center_freq == curr_channel->center_freq))
fast_txp = true;
* any settings (5210 also only supports
* a/aturbo modes)
*/
- if (ah->ah_version != AR5K_AR5210) {
+ if ((ah->ah_version != AR5K_AR5210) && !fast) {
/*
* Write initial RF gain settings
AR5K_TXCFG_B_MODE);
}
- } else {
+ } else if (ah->ah_version == AR5K_AR5210) {
mdelay(1);
/* Disable phy and wait */
ath5k_hw_reg_write(ah, AR5K_PHY_ACT_DISABLE, AR5K_PHY_ACT);
mdelay(1);
}
- /*
- * Perform ADC test to see if baseband is ready
- * Set TX hold and check ADC test register
- */
- phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
- ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
- for (i = 0; i <= 20; i++) {
- if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
- break;
- udelay(200);
+ if (fast)
+ /*
+ * Release RF Bus grant
+ */
+ AR5K_REG_DISABLE_BITS(ah, AR5K_PHY_RFBUS_REQ,
+ AR5K_PHY_RFBUS_REQ_REQUEST);
+ else {
+ /*
+ * Perform ADC test to see if baseband is ready
+ * Set tx hold and check adc test register
+ */
+ phy_tst1 = ath5k_hw_reg_read(ah, AR5K_PHY_TST1);
+ ath5k_hw_reg_write(ah, AR5K_PHY_TST1_TXHOLD, AR5K_PHY_TST1);
+ for (i = 0; i <= 20; i++) {
+ if (!(ath5k_hw_reg_read(ah, AR5K_PHY_ADC_TEST) & 0x10))
+ break;
+ udelay(200);
+ }
+ ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
}
- ath5k_hw_reg_write(ah, phy_tst1, AR5K_PHY_TST1);
/*
* Start automatic gain control calibration
\*********************/
int ath5k_hw_reset(struct ath5k_hw *ah, enum nl80211_iftype op_mode,
- struct ieee80211_channel *channel, bool change_channel)
+ struct ieee80211_channel *channel, bool fast, bool skip_pcu)
{
struct ath_common *common = ath5k_hw_common(ah);
u32 s_seq[10], s_led[3], staid1_flags, tsf_up, tsf_lo;
freq = 0;
mode = 0;
+ /*
+ * Sanity check for fast flag
+ * Fast channel change only available
+ * on AR2413/AR5413.
+ */
+ if (fast && (ah->ah_radio != AR5K_RF2413) &&
+ (ah->ah_radio != AR5K_RF5413))
+ fast = 0;
+
+ /* Disable sleep clock operation
+ * to avoid register access delay on certain
+ * PHY registers */
+ if (ah->ah_version == AR5K_AR5212)
+ ath5k_hw_set_sleep_clock(ah, false);
/*
* Stop PCU
* Note: If DMA didn't stop continue
* since only a reset will fix it.
*/
- ath5k_hw_dma_stop(ah);
+ ret = ath5k_hw_dma_stop(ah);
+
+ /* RF Bus grant won't work if we have pending
+ * frames */
+ if (ret && fast) {
+ ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET,
+ "DMA didn't stop, falling back to normal reset\n");
+ fast = 0;
+ /* Non fatal, just continue with
+ * normal reset */
+ ret = 0;
+ }
- /*
- * Save some registers before a reset
- */
- /*DCU/Antenna selection not available on 5210*/
- if (ah->ah_version != AR5K_AR5210) {
+ switch (channel->hw_value & CHANNEL_MODES) {
+ case CHANNEL_A:
+ mode = AR5K_MODE_11A;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case CHANNEL_G:
- switch (channel->hw_value & CHANNEL_MODES) {
- case CHANNEL_A:
- mode = AR5K_MODE_11A;
- freq = AR5K_INI_RFGAIN_5GHZ;
- ee_mode = AR5K_EEPROM_MODE_11A;
- break;
- case CHANNEL_G:
- mode = AR5K_MODE_11G;
- freq = AR5K_INI_RFGAIN_2GHZ;
- ee_mode = AR5K_EEPROM_MODE_11G;
- break;
- case CHANNEL_B:
- mode = AR5K_MODE_11B;
- freq = AR5K_INI_RFGAIN_2GHZ;
- ee_mode = AR5K_EEPROM_MODE_11B;
- break;
- case CHANNEL_T:
- mode = AR5K_MODE_11A_TURBO;
- freq = AR5K_INI_RFGAIN_5GHZ;
- ee_mode = AR5K_EEPROM_MODE_11A;
- break;
- case CHANNEL_TG:
- if (ah->ah_version == AR5K_AR5211) {
- ATH5K_ERR(ah->ah_sc,
- "TurboG mode not available on 5211");
- return -EINVAL;
- }
- mode = AR5K_MODE_11G_TURBO;
- freq = AR5K_INI_RFGAIN_2GHZ;
- ee_mode = AR5K_EEPROM_MODE_11G;
- break;
- case CHANNEL_XR:
- if (ah->ah_version == AR5K_AR5211) {
- ATH5K_ERR(ah->ah_sc,
- "XR mode not available on 5211");
- return -EINVAL;
- }
- mode = AR5K_MODE_XR;
- freq = AR5K_INI_RFGAIN_5GHZ;
- ee_mode = AR5K_EEPROM_MODE_11A;
- break;
- default:
+ if (ah->ah_version <= AR5K_AR5211) {
ATH5K_ERR(ah->ah_sc,
- "invalid channel: %d\n", channel->center_freq);
+ "G mode not available on 5210/5211");
return -EINVAL;
}
- if (change_channel) {
- /*
- * Save frame sequence count
- * For revs. after Oahu, only save
- * seq num for DCU 0 (Global seq num)
- */
- if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
-
- for (i = 0; i < 10; i++)
- s_seq[i] = ath5k_hw_reg_read(ah,
- AR5K_QUEUE_DCU_SEQNUM(i));
+ mode = AR5K_MODE_11G;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ case CHANNEL_B:
- } else {
- s_seq[0] = ath5k_hw_reg_read(ah,
- AR5K_QUEUE_DCU_SEQNUM(0));
- }
+ if (ah->ah_version < AR5K_AR5211) {
+ ATH5K_ERR(ah->ah_sc,
+ "B mode not available on 5210");
+ return -EINVAL;
+ }
- /* TSF accelerates on AR5211 during reset
- * As a workaround save it here and restore
- * it later so that it's back in time after
- * reset. This way it'll get re-synced on the
- * next beacon without breaking ad-hoc.
- *
- * On AR5212 TSF is almost preserved across a
- * reset so it stays back in time anyway and
- * we don't have to save/restore it.
- *
- * XXX: Since this breaks power saving we have
- * to disable power saving until we receive the
- * next beacon, so we can resync beacon timers */
- if (ah->ah_version == AR5K_AR5211) {
- tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
- tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
- }
+ mode = AR5K_MODE_11B;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11B;
+ break;
+ case CHANNEL_T:
+ mode = AR5K_MODE_11A_TURBO;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ case CHANNEL_TG:
+ if (ah->ah_version == AR5K_AR5211) {
+ ATH5K_ERR(ah->ah_sc,
+ "TurboG mode not available on 5211");
+ return -EINVAL;
}
+ mode = AR5K_MODE_11G_TURBO;
+ freq = AR5K_INI_RFGAIN_2GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11G;
+ break;
+ case CHANNEL_XR:
+ if (ah->ah_version == AR5K_AR5211) {
+ ATH5K_ERR(ah->ah_sc,
+ "XR mode not available on 5211");
+ return -EINVAL;
+ }
+ mode = AR5K_MODE_XR;
+ freq = AR5K_INI_RFGAIN_5GHZ;
+ ee_mode = AR5K_EEPROM_MODE_11A;
+ break;
+ default:
+ ATH5K_ERR(ah->ah_sc,
+ "invalid channel: %d\n", channel->center_freq);
+ return -EINVAL;
+ }
- if (ah->ah_version == AR5K_AR5212) {
- /* Restore normal 32/40MHz clock operation
- * to avoid register access delay on certain
- * PHY registers */
- ath5k_hw_set_sleep_clock(ah, false);
+ /*
+ * If driver requested fast channel change and DMA has stopped
+ * go on. If it fails continue with a normal reset.
+ */
+ if (fast) {
+ ret = ath5k_hw_phy_init(ah, channel, mode,
+ ee_mode, freq, true);
+ if (ret) {
+ ATH5K_DBG(ah->ah_sc, ATH5K_DEBUG_RESET,
+ "fast chan change failed, falling back to normal reset\n");
+ /* Non fatal, can happen eg.
+ * on mode change */
+ ret = 0;
+ } else
+ return 0;
+ }
- /* Since we are going to write rf buffer
- * check if we have any pending gain_F
- * optimization settings */
- if (change_channel && ah->ah_rf_banks != NULL)
- ath5k_hw_gainf_calibrate(ah);
+ /*
+ * Save some registers before a reset
+ */
+ if (ah->ah_version != AR5K_AR5210) {
+ /*
+ * Save frame sequence count
+ * For revs. after Oahu, only save
+ * seq num for DCU 0 (Global seq num)
+ */
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+
+ for (i = 0; i < 10; i++)
+ s_seq[i] = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_DCU_SEQNUM(i));
+
+ } else {
+ s_seq[0] = ath5k_hw_reg_read(ah,
+ AR5K_QUEUE_DCU_SEQNUM(0));
+ }
+
+ /* TSF accelerates on AR5211 during reset
+ * As a workaround save it here and restore
+ * it later so that it's back in time after
+ * reset. This way it'll get re-synced on the
+ * next beacon without breaking ad-hoc.
+ *
+ * On AR5212 TSF is almost preserved across a
+ * reset so it stays back in time anyway and
+ * we don't have to save/restore it.
+ *
+ * XXX: Since this breaks power saving we have
+ * to disable power saving until we receive the
+ * next beacon, so we can resync beacon timers */
+ if (ah->ah_version == AR5K_AR5211) {
+ tsf_up = ath5k_hw_reg_read(ah, AR5K_TSF_U32);
+ tsf_lo = ath5k_hw_reg_read(ah, AR5K_TSF_L32);
}
}
+
/*GPIOs*/
s_led[0] = ath5k_hw_reg_read(ah, AR5K_PCICFG) &
AR5K_PCICFG_LEDSTATE;
AR5K_STA_ID1_BASE_RATE_11B |
AR5K_STA_ID1_SELFGEN_DEF_ANT);
+ /*
+ * Since we are going to write rf buffer
+ * check if we have any pending gain_F
+ * optimization settings
+ */
+ if (ah->ah_version == AR5K_AR5212 &&
+ (ah->ah_radio <= AR5K_RF5112)) {
+ if (!fast && ah->ah_rf_banks != NULL)
+ ath5k_hw_gainf_calibrate(ah);
+ }
+
/* Wakeup the device */
ret = ath5k_hw_nic_wakeup(ah, channel->hw_value, false);
if (ret)
AR5K_PHY(0));
/* Write initial settings */
- ret = ath5k_hw_write_initvals(ah, mode, change_channel);
+ ret = ath5k_hw_write_initvals(ah, mode, skip_pcu);
if (ret)
return ret;
* Restore saved values
*/
- /*DCU/Antenna selection not available on 5210*/
+ /* Seqnum, TSF */
if (ah->ah_version != AR5K_AR5210) {
+ if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
+ for (i = 0; i < 10; i++)
+ ath5k_hw_reg_write(ah, s_seq[i],
+ AR5K_QUEUE_DCU_SEQNUM(i));
+ } else {
+ ath5k_hw_reg_write(ah, s_seq[0],
+ AR5K_QUEUE_DCU_SEQNUM(0));
+ }
- if (change_channel) {
- if (ah->ah_mac_srev < AR5K_SREV_AR5211) {
- for (i = 0; i < 10; i++)
- ath5k_hw_reg_write(ah, s_seq[i],
- AR5K_QUEUE_DCU_SEQNUM(i));
- } else {
- ath5k_hw_reg_write(ah, s_seq[0],
- AR5K_QUEUE_DCU_SEQNUM(0));
- }
-
-
- if (ah->ah_version == AR5K_AR5211) {
- ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32);
- ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32);
- }
+ if (ah->ah_version == AR5K_AR5211) {
+ ath5k_hw_reg_write(ah, tsf_up, AR5K_TSF_U32);
+ ath5k_hw_reg_write(ah, tsf_lo, AR5K_TSF_L32);
}
}
/*
* Initialize PHY
*/
- ret = ath5k_hw_phy_init(ah, channel, mode, ee_mode, freq);
+ ret = ath5k_hw_phy_init(ah, channel, mode, ee_mode, freq, false);
if (ret) {
ATH5K_ERR(ah->ah_sc,
"failed to initialize PHY (%i) !\n", ret);
projects / ~emulex / infiniband.git / commitdiff