return fe_slave == NULL ? -ENODEV : 0;
}
+/* TFE8096P */
+static struct dibx000_agc_config dib8096p_agc_config[2] = {
+ {
+ .band_caps = BAND_UHF,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+ P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+ P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+ P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+ P_agc_write=0 */
+ .setup = (0 << 15) | (0 << 14) | (5 << 11)
+ | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
+ | (0 << 4) | (5 << 1) | (0 << 0),
+
+ .inv_gain = 684,
+ .time_stabiliz = 10,
+
+ .alpha_level = 0,
+ .thlock = 118,
+
+ .wbd_inv = 0,
+ .wbd_ref = 1200,
+ .wbd_sel = 3,
+ .wbd_alpha = 5,
+
+ .agc1_max = 65535,
+ .agc1_min = 0,
+
+ .agc2_max = 32767,
+ .agc2_min = 0,
+
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 0,
+ .agc1_pt3 = 105,
+ .agc1_slope1 = 0,
+ .agc1_slope2 = 156,
+ .agc2_pt1 = 105,
+ .agc2_pt2 = 255,
+ .agc2_slope1 = 54,
+ .agc2_slope2 = 0,
+
+ .alpha_mant = 28,
+ .alpha_exp = 26,
+ .beta_mant = 31,
+ .beta_exp = 51,
+
+ .perform_agc_softsplit = 0,
+ } , {
+ .band_caps = BAND_FM | BAND_VHF | BAND_CBAND,
+ /* P_agc_use_sd_mod1=0, P_agc_use_sd_mod2=0,
+ P_agc_freq_pwm_div=1, P_agc_inv_pwm1=0,
+ P_agc_inv_pwm2=0, P_agc_inh_dc_rv_est=0,
+ P_agc_time_est=3, P_agc_freeze=0, P_agc_nb_est=5,
+ P_agc_write=0 */
+ .setup = (0 << 15) | (0 << 14) | (5 << 11)
+ | (0 << 10) | (0 << 9) | (0 << 8) | (3 << 5)
+ | (0 << 4) | (5 << 1) | (0 << 0),
+
+ .inv_gain = 732,
+ .time_stabiliz = 10,
+
+ .alpha_level = 0,
+ .thlock = 118,
+
+ .wbd_inv = 0,
+ .wbd_ref = 1200,
+ .wbd_sel = 3,
+ .wbd_alpha = 5,
+
+ .agc1_max = 65535,
+ .agc1_min = 0,
+
+ .agc2_max = 32767,
+ .agc2_min = 0,
+
+ .agc1_pt1 = 0,
+ .agc1_pt2 = 0,
+ .agc1_pt3 = 98,
+ .agc1_slope1 = 0,
+ .agc1_slope2 = 167,
+ .agc2_pt1 = 98,
+ .agc2_pt2 = 255,
+ .agc2_slope1 = 52,
+ .agc2_slope2 = 0,
+
+ .alpha_mant = 28,
+ .alpha_exp = 26,
+ .beta_mant = 31,
+ .beta_exp = 51,
+
+ .perform_agc_softsplit = 0,
+ }
+};
+
+static struct dibx000_bandwidth_config dib8096p_clock_config_12_mhz = {
+ 108000, 13500,
+ 1, 9, 1, 0, 0,
+ 0, 0, 0, 0, 2,
+ (3 << 14) | (1 << 12) | (524 << 0),
+ (0 << 25) | 0,
+ 20199729,
+ 12000000,
+};
+
+static struct dib8000_config tfe8096p_dib8000_config = {
+ .output_mpeg2_in_188_bytes = 1,
+ .hostbus_diversity = 1,
+ .update_lna = NULL,
+
+ .agc_config_count = 2,
+ .agc = dib8096p_agc_config,
+ .pll = &dib8096p_clock_config_12_mhz,
+
+ .gpio_dir = DIB8000_GPIO_DEFAULT_DIRECTIONS,
+ .gpio_val = DIB8000_GPIO_DEFAULT_VALUES,
+ .gpio_pwm_pos = DIB8000_GPIO_DEFAULT_PWM_POS,
+
+ .agc_control = NULL,
+ .diversity_delay = 48,
+ .output_mode = OUTMODE_MPEG2_FIFO,
+ .enMpegOutput = 1,
+};
+
+static struct dib0090_wbd_slope dib8096p_wbd_table[] = {
+ { 380, 81, 850, 64, 540, 4},
+ { 860, 51, 866, 21, 375, 4},
+ {1700, 0, 250, 0, 100, 6},
+ {2600, 0, 250, 0, 100, 6},
+ { 0xFFFF, 0, 0, 0, 0, 0},
+};
+
+static const struct dib0090_config tfe8096p_dib0090_config = {
+ .io.clock_khz = 12000,
+ .io.pll_bypass = 0,
+ .io.pll_range = 0,
+ .io.pll_prediv = 3,
+ .io.pll_loopdiv = 6,
+ .io.adc_clock_ratio = 0,
+ .io.pll_int_loop_filt = 0,
+ .reset = dib8096p_tuner_sleep,
+ .sleep = dib8096p_tuner_sleep,
+
+ .freq_offset_khz_uhf = -143,
+ .freq_offset_khz_vhf = -143,
+
+ .get_adc_power = dib8090_get_adc_power,
+
+ .clkouttobamse = 1,
+ .analog_output = 0,
+
+ .wbd_vhf_offset = 0,
+ .wbd_cband_offset = 0,
+ .use_pwm_agc = 1,
+ .clkoutdrive = 0,
+
+ .fref_clock_ratio = 1,
+
+ .wbd = dib8096p_wbd_table,
+
+ .ls_cfg_pad_drv = 0,
+ .data_tx_drv = 0,
+ .low_if = NULL,
+ .in_soc = 1,
+ .force_cband_input = 0,
+};
+
+struct dibx090p_adc {
+ u32 freq; /* RF freq MHz */
+ u32 timf; /* New Timf */
+ u32 pll_loopdiv; /* New prediv */
+ u32 pll_prediv; /* New loopdiv */
+};
+
+struct dibx090p_adc dib8090p_adc_tab[] = {
+ { 50000, 17043521, 16, 3}, /* 64 MHz */
+ {878000, 20199729, 9, 1}, /* 60 MHz */
+ {0xffffffff, 0, 0, 0}, /* 60 MHz */
+};
+
+static int dib8096p_agc_startup(struct dvb_frontend *fe,
+ struct dvb_frontend_parameters *fep)
+{
+ struct dvb_usb_adapter *adap = fe->dvb->priv;
+ struct dib0700_adapter_state *state = adap->priv;
+ struct dibx000_bandwidth_config pll;
+ u16 target;
+ int better_sampling_freq = 0, ret;
+ struct dibx090p_adc *adc_table = &dib8090p_adc_tab[0];
+
+ ret = state->set_param_save(fe, fep);
+ if (ret < 0)
+ return ret;
+ memset(&pll, 0, sizeof(struct dibx000_bandwidth_config));
+
+ dib0090_pwm_gain_reset(fe);
+ /* dib0090_get_wbd_target is returning any possible
+ temperature compensated wbd-target */
+ target = (dib0090_get_wbd_target(fe) * 8 + 1) / 2;
+ dib8000_set_wbd_ref(fe, target);
+
+
+ while (fep->frequency / 1000 > adc_table->freq) {
+ better_sampling_freq = 1;
+ adc_table++;
+ }
+
+ if ((adc_table->freq != 0xffffffff) && better_sampling_freq) {
+ pll.pll_ratio = adc_table->pll_loopdiv;
+ pll.pll_prediv = adc_table->pll_prediv;
+ dib8000_update_pll(fe, &pll);
+ dib8000_ctrl_timf(fe, DEMOD_TIMF_SET, adc_table->timf);
+ }
+ return 0;
+}
+
+static int tfe8096p_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1);
+ dib0700_set_gpio(adap->dev, GPIO7, GPIO_OUT, 1);
+
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 0);
+
+ dib0700_ctrl_clock(adap->dev, 72, 1);
+
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO10, GPIO_OUT, 1);
+ msleep(20);
+ dib0700_set_gpio(adap->dev, GPIO0, GPIO_OUT, 1);
+
+ dib8000_i2c_enumeration(&adap->dev->i2c_adap, 1, 0x10, 0x80, 1);
+
+ adap->fe_adap[0].fe = dvb_attach(dib8000_attach,
+ &adap->dev->i2c_adap, 0x80, &tfe8096p_dib8000_config);
+
+ return adap->fe_adap[0].fe == NULL ? -ENODEV : 0;
+}
+
+static int tfe8096p_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dib0700_adapter_state *st = adap->priv;
+ struct i2c_adapter *tun_i2c = dib8096p_get_i2c_tuner(adap->fe_adap[0].fe);
+
+ if (dvb_attach(dib0090_register, adap->fe_adap[0].fe, tun_i2c,
+ &tfe8096p_dib0090_config) == NULL)
+ return -ENODEV;
+
+ dib8000_set_gpio(adap->fe_adap[0].fe, 8, 0, 1);
+
+ st->set_param_save = adap->fe_adap[0].fe->ops.tuner_ops.set_params;
+ adap->fe_adap[0].fe->ops.tuner_ops.set_params = dib8096p_agc_startup;
+ return 0;
+}
+
/* STK9090M */
static int dib90x0_pid_filter(struct dvb_usb_adapter *adapter, int index, u16 pid, int onoff)
{
{ USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV340E_SE) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7090E) },
{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE7790E) },
+/* 80 */{ USB_DEVICE(USB_VID_DIBCOM, USB_PID_DIBCOM_TFE8096P) },
{ 0 } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, dib0700_usb_id_table);
},
},
+ .rc.core = {
+ .rc_interval = DEFAULT_RC_INTERVAL,
+ .rc_codes = RC_MAP_DIB0700_RC5_TABLE,
+ .module_name = "dib0700",
+ .rc_query = dib0700_rc_query_old_firmware,
+ .allowed_protos = RC_TYPE_RC5 |
+ RC_TYPE_RC6 |
+ RC_TYPE_NEC,
+ .change_protocol = dib0700_change_protocol,
+ },
+ }, { DIB0700_DEFAULT_DEVICE_PROPERTIES,
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .num_frontends = 1,
+ .fe = {{
+ .caps = DVB_USB_ADAP_HAS_PID_FILTER |
+ DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
+ .pid_filter_count = 32,
+ .pid_filter = stk80xx_pid_filter,
+ .pid_filter_ctrl = stk80xx_pid_filter_ctrl,
+ .frontend_attach = tfe8096p_frontend_attach,
+ .tuner_attach = tfe8096p_tuner_attach,
+
+ DIB0700_DEFAULT_STREAMING_CONFIG(0x02),
+
+ } },
+
+ .size_of_priv =
+ sizeof(struct dib0700_adapter_state),
+ },
+ },
+
+ .num_device_descs = 1,
+ .devices = {
+ { "DiBcom TFE8096P reference design",
+ { &dib0700_usb_id_table[80], NULL },
+ { NULL },
+ },
+ },
+
.rc.core = {
.rc_interval = DEFAULT_RC_INTERVAL,
.rc_codes = RC_MAP_DIB0700_RC5_TABLE,
projects / ~shefty / rdma-dev.git / commitdiff