ifeq ($(CONFIG_PPC64),y)
EXTRA_CFLAGS += -mno-minimal-toc
+CFLAGS_ioctl32.o += -Ifs/
endif
ifeq ($(CONFIG_PPC32),y)
CFLAGS_prom_init.o += -fPIC
obj-y := semaphore.o cputable.o ptrace.o syscalls.o \
signal_32.o pmc.o
obj-$(CONFIG_PPC64) += setup_64.o binfmt_elf32.o sys_ppc32.o \
- signal_64.o ptrace32.o systbl.o
+ signal_64.o ptrace32.o systbl.o \
+ paca.o ioctl32.o cpu_setup_power4.o \
+ firmware.o
obj-$(CONFIG_ALTIVEC) += vecemu.o vector.o
obj-$(CONFIG_POWER4) += idle_power4.o
obj-$(CONFIG_PPC_OF) += of_device.o
--- /dev/null
+/*
+ * This file contains low level CPU setup functions.
+ * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#include <linux/config.h>
+#include <asm/processor.h>
+#include <asm/page.h>
+#include <asm/cputable.h>
+#include <asm/ppc_asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/cache.h>
+
+_GLOBAL(__970_cpu_preinit)
+ /*
+ * Do nothing if not running in HV mode
+ */
+ mfmsr r0
+ rldicl. r0,r0,4,63
+ beqlr
+
+ /*
+ * Deal only with PPC970 and PPC970FX.
+ */
+ mfspr r0,SPRN_PVR
+ srwi r0,r0,16
+ cmpwi r0,0x39
+ beq 1f
+ cmpwi r0,0x3c
+ beq 1f
+ cmpwi r0,0x44
+ bnelr
+1:
+
+ /* Make sure HID4:rm_ci is off before MMU is turned off, that large
+ * pages are enabled with HID4:61 and clear HID5:DCBZ_size and
+ * HID5:DCBZ32_ill
+ */
+ li r0,0
+ mfspr r3,SPRN_HID4
+ rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */
+ rldimi r3,r0,2,61 /* clear bit 61 (lg_pg_en) */
+ sync
+ mtspr SPRN_HID4,r3
+ isync
+ sync
+ mfspr r3,SPRN_HID5
+ rldimi r3,r0,6,56 /* clear bits 56 & 57 (DCBZ*) */
+ sync
+ mtspr SPRN_HID5,r3
+ isync
+ sync
+
+ /* Setup some basic HID1 features */
+ mfspr r0,SPRN_HID1
+ li r3,0x1200 /* enable i-fetch cacheability */
+ sldi r3,r3,44 /* and prefetch */
+ or r0,r0,r3
+ mtspr SPRN_HID1,r0
+ mtspr SPRN_HID1,r0
+ isync
+
+ /* Clear HIOR */
+ li r0,0
+ sync
+ mtspr SPRN_HIOR,0 /* Clear interrupt prefix */
+ isync
+ blr
+
+_GLOBAL(__setup_cpu_power4)
+ blr
+
+_GLOBAL(__setup_cpu_be)
+ /* Set large page sizes LP=0: 16MB, LP=1: 64KB */
+ addi r3, 0, 0
+ ori r3, r3, HID6_LB
+ sldi r3, r3, 32
+ nor r3, r3, r3
+ mfspr r4, SPRN_HID6
+ and r4, r4, r3
+ addi r3, 0, 0x02000
+ sldi r3, r3, 32
+ or r4, r4, r3
+ mtspr SPRN_HID6, r4
+ blr
+
+_GLOBAL(__setup_cpu_ppc970)
+ mfspr r0,SPRN_HID0
+ li r11,5 /* clear DOZE and SLEEP */
+ rldimi r0,r11,52,8 /* set NAP and DPM */
+ mtspr SPRN_HID0,r0
+ mfspr r0,SPRN_HID0
+ mfspr r0,SPRN_HID0
+ mfspr r0,SPRN_HID0
+ mfspr r0,SPRN_HID0
+ mfspr r0,SPRN_HID0
+ mfspr r0,SPRN_HID0
+ sync
+ isync
+ blr
+
+/* Definitions for the table use to save CPU states */
+#define CS_HID0 0
+#define CS_HID1 8
+#define CS_HID4 16
+#define CS_HID5 24
+#define CS_SIZE 32
+
+ .data
+ .balign L1_CACHE_BYTES,0
+cpu_state_storage:
+ .space CS_SIZE
+ .balign L1_CACHE_BYTES,0
+ .text
+
+/* Called in normal context to backup CPU 0 state. This
+ * does not include cache settings. This function is also
+ * called for machine sleep. This does not include the MMU
+ * setup, BATs, etc... but rather the "special" registers
+ * like HID0, HID1, HID4, etc...
+ */
+_GLOBAL(__save_cpu_setup)
+ /* Some CR fields are volatile, we back it up all */
+ mfcr r7
+
+ /* Get storage ptr */
+ LOADADDR(r5,cpu_state_storage)
+
+ /* We only deal with 970 for now */
+ mfspr r0,SPRN_PVR
+ srwi r0,r0,16
+ cmpwi r0,0x39
+ beq 1f
+ cmpwi r0,0x3c
+ beq 1f
+ cmpwi r0,0x44
+ bne 2f
+
+1: /* Save HID0,1,4 and 5 */
+ mfspr r3,SPRN_HID0
+ std r3,CS_HID0(r5)
+ mfspr r3,SPRN_HID1
+ std r3,CS_HID1(r5)
+ mfspr r3,SPRN_HID4
+ std r3,CS_HID4(r5)
+ mfspr r3,SPRN_HID5
+ std r3,CS_HID5(r5)
+
+2:
+ mtcr r7
+ blr
+
+/* Called with no MMU context (typically MSR:IR/DR off) to
+ * restore CPU state as backed up by the previous
+ * function. This does not include cache setting
+ */
+_GLOBAL(__restore_cpu_setup)
+ /* Get storage ptr (FIXME when using anton reloc as we
+ * are running with translation disabled here
+ */
+ LOADADDR(r5,cpu_state_storage)
+
+ /* We only deal with 970 for now */
+ mfspr r0,SPRN_PVR
+ srwi r0,r0,16
+ cmpwi r0,0x39
+ beq 1f
+ cmpwi r0,0x3c
+ beq 1f
+ cmpwi r0,0x44
+ bnelr
+
+1: /* Before accessing memory, we make sure rm_ci is clear */
+ li r0,0
+ mfspr r3,SPRN_HID4
+ rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */
+ sync
+ mtspr SPRN_HID4,r3
+ isync
+ sync
+
+ /* Clear interrupt prefix */
+ li r0,0
+ sync
+ mtspr SPRN_HIOR,0
+ isync
+
+ /* Restore HID0 */
+ ld r3,CS_HID0(r5)
+ sync
+ isync
+ mtspr SPRN_HID0,r3
+ mfspr r3,SPRN_HID0
+ mfspr r3,SPRN_HID0
+ mfspr r3,SPRN_HID0
+ mfspr r3,SPRN_HID0
+ mfspr r3,SPRN_HID0
+ mfspr r3,SPRN_HID0
+ sync
+ isync
+
+ /* Restore HID1 */
+ ld r3,CS_HID1(r5)
+ sync
+ isync
+ mtspr SPRN_HID1,r3
+ mtspr SPRN_HID1,r3
+ sync
+ isync
+
+ /* Restore HID4 */
+ ld r3,CS_HID4(r5)
+ sync
+ isync
+ mtspr SPRN_HID4,r3
+ sync
+ isync
+
+ /* Restore HID5 */
+ ld r3,CS_HID5(r5)
+ sync
+ isync
+ mtspr SPRN_HID5,r3
+ sync
+ isync
+ blr
+
--- /dev/null
+/*
+ * Extracted from cputable.c
+ *
+ * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
+ *
+ * Modifications for ppc64:
+ * Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
+ * Copyright (C) 2005 Stephen Rothwell, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+
+#include <asm/firmware.h>
+
+unsigned long ppc64_firmware_features;
+
+#ifdef CONFIG_PPC_PSERIES
+firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = {
+ {FW_FEATURE_PFT, "hcall-pft"},
+ {FW_FEATURE_TCE, "hcall-tce"},
+ {FW_FEATURE_SPRG0, "hcall-sprg0"},
+ {FW_FEATURE_DABR, "hcall-dabr"},
+ {FW_FEATURE_COPY, "hcall-copy"},
+ {FW_FEATURE_ASR, "hcall-asr"},
+ {FW_FEATURE_DEBUG, "hcall-debug"},
+ {FW_FEATURE_PERF, "hcall-perf"},
+ {FW_FEATURE_DUMP, "hcall-dump"},
+ {FW_FEATURE_INTERRUPT, "hcall-interrupt"},
+ {FW_FEATURE_MIGRATE, "hcall-migrate"},
+ {FW_FEATURE_PERFMON, "hcall-perfmon"},
+ {FW_FEATURE_CRQ, "hcall-crq"},
+ {FW_FEATURE_VIO, "hcall-vio"},
+ {FW_FEATURE_RDMA, "hcall-rdma"},
+ {FW_FEATURE_LLAN, "hcall-lLAN"},
+ {FW_FEATURE_BULK, "hcall-bulk"},
+ {FW_FEATURE_XDABR, "hcall-xdabr"},
+ {FW_FEATURE_MULTITCE, "hcall-multi-tce"},
+ {FW_FEATURE_SPLPAR, "hcall-splpar"},
+};
+#endif
--- /dev/null
+/*
+ * ioctl32.c: Conversion between 32bit and 64bit native ioctls.
+ *
+ * Based on sparc64 ioctl32.c by:
+ *
+ * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com)
+ * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
+ *
+ * ppc64 changes:
+ *
+ * Copyright (C) 2000 Ken Aaker (kdaaker@rchland.vnet.ibm.com)
+ * Copyright (C) 2001 Anton Blanchard (antonb@au.ibm.com)
+ *
+ * These routines maintain argument size conversion between 32bit and 64bit
+ * ioctls.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#define INCLUDES
+#include "compat_ioctl.c"
+#include <linux/syscalls.h>
+
+#define CODE
+#include "compat_ioctl.c"
+
+#define HANDLE_IOCTL(cmd,handler) { cmd, (ioctl_trans_handler_t)handler, NULL },
+#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd,sys_ioctl)
+
+#define IOCTL_TABLE_START \
+ struct ioctl_trans ioctl_start[] = {
+#define IOCTL_TABLE_END \
+ };
+
+IOCTL_TABLE_START
+#include <linux/compat_ioctl.h>
+#define DECLARES
+#include "compat_ioctl.c"
+
+/* Little p (/dev/rtc, /dev/envctrl, etc.) */
+COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */
+COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */
+
+IOCTL_TABLE_END
+
+int ioctl_table_size = ARRAY_SIZE(ioctl_start);
--- /dev/null
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/config.h>
+#include <linux/types.h>
+#include <linux/threads.h>
+#include <linux/module.h>
+
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/page.h>
+
+#include <asm/lppaca.h>
+#include <asm/iseries/it_lp_queue.h>
+#include <asm/paca.h>
+
+static union {
+ struct systemcfg data;
+ u8 page[PAGE_SIZE];
+} systemcfg_store __attribute__((__section__(".data.page.aligned")));
+struct systemcfg *systemcfg = &systemcfg_store.data;
+EXPORT_SYMBOL(systemcfg);
+
+
+/* This symbol is provided by the linker - let it fill in the paca
+ * field correctly */
+extern unsigned long __toc_start;
+
+/* The Paca is an array with one entry per processor. Each contains an
+ * lppaca, which contains the information shared between the
+ * hypervisor and Linux. Each also contains an ItLpRegSave area which
+ * is used by the hypervisor to save registers.
+ * On systems with hardware multi-threading, there are two threads
+ * per processor. The Paca array must contain an entry for each thread.
+ * The VPD Areas will give a max logical processors = 2 * max physical
+ * processors. The processor VPD array needs one entry per physical
+ * processor (not thread).
+ */
+#define PACA_INIT_COMMON(number, start, asrr, asrv) \
+ .lock_token = 0x8000, \
+ .paca_index = (number), /* Paca Index */ \
+ .default_decr = 0x00ff0000, /* Initial Decr */ \
+ .kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \
+ .stab_real = (asrr), /* Real pointer to segment table */ \
+ .stab_addr = (asrv), /* Virt pointer to segment table */ \
+ .cpu_start = (start), /* Processor start */ \
+ .hw_cpu_id = 0xffff, \
+ .lppaca = { \
+ .desc = 0xd397d781, /* "LpPa" */ \
+ .size = sizeof(struct lppaca), \
+ .dyn_proc_status = 2, \
+ .decr_val = 0x00ff0000, \
+ .fpregs_in_use = 1, \
+ .end_of_quantum = 0xfffffffffffffffful, \
+ .slb_count = 64, \
+ .vmxregs_in_use = 0, \
+ }, \
+
+#ifdef CONFIG_PPC_ISERIES
+#define PACA_INIT_ISERIES(number) \
+ .lppaca_ptr = &paca[number].lppaca, \
+ .reg_save_ptr = &paca[number].reg_save, \
+ .reg_save = { \
+ .xDesc = 0xd397d9e2, /* "LpRS" */ \
+ .xSize = sizeof(struct ItLpRegSave) \
+ }
+
+#define PACA_INIT(number) \
+{ \
+ PACA_INIT_COMMON(number, 0, 0, 0) \
+ PACA_INIT_ISERIES(number) \
+}
+
+#define BOOTCPU_PACA_INIT(number) \
+{ \
+ PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab) \
+ PACA_INIT_ISERIES(number) \
+}
+
+#else
+#define PACA_INIT(number) \
+{ \
+ PACA_INIT_COMMON(number, 0, 0, 0) \
+}
+
+#define BOOTCPU_PACA_INIT(number) \
+{ \
+ PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab) \
+}
+#endif
+
+struct paca_struct paca[] = {
+ BOOTCPU_PACA_INIT(0),
+#if NR_CPUS > 1
+ PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3),
+#if NR_CPUS > 4
+ PACA_INIT( 4), PACA_INIT( 5), PACA_INIT( 6), PACA_INIT( 7),
+#if NR_CPUS > 8
+ PACA_INIT( 8), PACA_INIT( 9), PACA_INIT( 10), PACA_INIT( 11),
+ PACA_INIT( 12), PACA_INIT( 13), PACA_INIT( 14), PACA_INIT( 15),
+ PACA_INIT( 16), PACA_INIT( 17), PACA_INIT( 18), PACA_INIT( 19),
+ PACA_INIT( 20), PACA_INIT( 21), PACA_INIT( 22), PACA_INIT( 23),
+ PACA_INIT( 24), PACA_INIT( 25), PACA_INIT( 26), PACA_INIT( 27),
+ PACA_INIT( 28), PACA_INIT( 29), PACA_INIT( 30), PACA_INIT( 31),
+#if NR_CPUS > 32
+ PACA_INIT( 32), PACA_INIT( 33), PACA_INIT( 34), PACA_INIT( 35),
+ PACA_INIT( 36), PACA_INIT( 37), PACA_INIT( 38), PACA_INIT( 39),
+ PACA_INIT( 40), PACA_INIT( 41), PACA_INIT( 42), PACA_INIT( 43),
+ PACA_INIT( 44), PACA_INIT( 45), PACA_INIT( 46), PACA_INIT( 47),
+ PACA_INIT( 48), PACA_INIT( 49), PACA_INIT( 50), PACA_INIT( 51),
+ PACA_INIT( 52), PACA_INIT( 53), PACA_INIT( 54), PACA_INIT( 55),
+ PACA_INIT( 56), PACA_INIT( 57), PACA_INIT( 58), PACA_INIT( 59),
+ PACA_INIT( 60), PACA_INIT( 61), PACA_INIT( 62), PACA_INIT( 63),
+#if NR_CPUS > 64
+ PACA_INIT( 64), PACA_INIT( 65), PACA_INIT( 66), PACA_INIT( 67),
+ PACA_INIT( 68), PACA_INIT( 69), PACA_INIT( 70), PACA_INIT( 71),
+ PACA_INIT( 72), PACA_INIT( 73), PACA_INIT( 74), PACA_INIT( 75),
+ PACA_INIT( 76), PACA_INIT( 77), PACA_INIT( 78), PACA_INIT( 79),
+ PACA_INIT( 80), PACA_INIT( 81), PACA_INIT( 82), PACA_INIT( 83),
+ PACA_INIT( 84), PACA_INIT( 85), PACA_INIT( 86), PACA_INIT( 87),
+ PACA_INIT( 88), PACA_INIT( 89), PACA_INIT( 90), PACA_INIT( 91),
+ PACA_INIT( 92), PACA_INIT( 93), PACA_INIT( 94), PACA_INIT( 95),
+ PACA_INIT( 96), PACA_INIT( 97), PACA_INIT( 98), PACA_INIT( 99),
+ PACA_INIT(100), PACA_INIT(101), PACA_INIT(102), PACA_INIT(103),
+ PACA_INIT(104), PACA_INIT(105), PACA_INIT(106), PACA_INIT(107),
+ PACA_INIT(108), PACA_INIT(109), PACA_INIT(110), PACA_INIT(111),
+ PACA_INIT(112), PACA_INIT(113), PACA_INIT(114), PACA_INIT(115),
+ PACA_INIT(116), PACA_INIT(117), PACA_INIT(118), PACA_INIT(119),
+ PACA_INIT(120), PACA_INIT(121), PACA_INIT(122), PACA_INIT(123),
+ PACA_INIT(124), PACA_INIT(125), PACA_INIT(126), PACA_INIT(127),
+#endif
+#endif
+#endif
+#endif
+#endif
+};
+EXPORT_SYMBOL(paca);
endif
obj-y += irq.o idle.o dma.o \
- align.o pacaData.o \
- udbg.o ioctl32.o \
+ align.o \
+ udbg.o \
rtc.o \
- cpu_setup_power4.o \
- iommu.o sysfs.o vdso.o firmware.o
+ iommu.o sysfs.o vdso.o
obj-y += vdso32/ vdso64/
pci-obj-$(CONFIG_PPC_MULTIPLATFORM) += pci_dn.o pci_direct_iommu.o
obj-$(CONFIG_KPROBES) += kprobes.o
-CFLAGS_ioctl32.o += -Ifs/
-
ifneq ($(CONFIG_PPC_MERGE),y)
ifeq ($(CONFIG_PPC_ISERIES),y)
arch/ppc64/kernel/head.o: arch/powerpc/kernel/lparmap.s
+++ /dev/null
-/*
- * This file contains low level CPU setup functions.
- * Copyright (C) 2003 Benjamin Herrenschmidt (benh@kernel.crashing.org)
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/config.h>
-#include <asm/processor.h>
-#include <asm/page.h>
-#include <asm/cputable.h>
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/cache.h>
-
-_GLOBAL(__970_cpu_preinit)
- /*
- * Do nothing if not running in HV mode
- */
- mfmsr r0
- rldicl. r0,r0,4,63
- beqlr
-
- /*
- * Deal only with PPC970 and PPC970FX.
- */
- mfspr r0,SPRN_PVR
- srwi r0,r0,16
- cmpwi r0,0x39
- beq 1f
- cmpwi r0,0x3c
- beq 1f
- cmpwi r0,0x44
- bnelr
-1:
-
- /* Make sure HID4:rm_ci is off before MMU is turned off, that large
- * pages are enabled with HID4:61 and clear HID5:DCBZ_size and
- * HID5:DCBZ32_ill
- */
- li r0,0
- mfspr r3,SPRN_HID4
- rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */
- rldimi r3,r0,2,61 /* clear bit 61 (lg_pg_en) */
- sync
- mtspr SPRN_HID4,r3
- isync
- sync
- mfspr r3,SPRN_HID5
- rldimi r3,r0,6,56 /* clear bits 56 & 57 (DCBZ*) */
- sync
- mtspr SPRN_HID5,r3
- isync
- sync
-
- /* Setup some basic HID1 features */
- mfspr r0,SPRN_HID1
- li r3,0x1200 /* enable i-fetch cacheability */
- sldi r3,r3,44 /* and prefetch */
- or r0,r0,r3
- mtspr SPRN_HID1,r0
- mtspr SPRN_HID1,r0
- isync
-
- /* Clear HIOR */
- li r0,0
- sync
- mtspr SPRN_HIOR,0 /* Clear interrupt prefix */
- isync
- blr
-
-_GLOBAL(__setup_cpu_power4)
- blr
-
-_GLOBAL(__setup_cpu_be)
- /* Set large page sizes LP=0: 16MB, LP=1: 64KB */
- addi r3, 0, 0
- ori r3, r3, HID6_LB
- sldi r3, r3, 32
- nor r3, r3, r3
- mfspr r4, SPRN_HID6
- and r4, r4, r3
- addi r3, 0, 0x02000
- sldi r3, r3, 32
- or r4, r4, r3
- mtspr SPRN_HID6, r4
- blr
-
-_GLOBAL(__setup_cpu_ppc970)
- mfspr r0,SPRN_HID0
- li r11,5 /* clear DOZE and SLEEP */
- rldimi r0,r11,52,8 /* set NAP and DPM */
- mtspr SPRN_HID0,r0
- mfspr r0,SPRN_HID0
- mfspr r0,SPRN_HID0
- mfspr r0,SPRN_HID0
- mfspr r0,SPRN_HID0
- mfspr r0,SPRN_HID0
- mfspr r0,SPRN_HID0
- sync
- isync
- blr
-
-/* Definitions for the table use to save CPU states */
-#define CS_HID0 0
-#define CS_HID1 8
-#define CS_HID4 16
-#define CS_HID5 24
-#define CS_SIZE 32
-
- .data
- .balign L1_CACHE_BYTES,0
-cpu_state_storage:
- .space CS_SIZE
- .balign L1_CACHE_BYTES,0
- .text
-
-/* Called in normal context to backup CPU 0 state. This
- * does not include cache settings. This function is also
- * called for machine sleep. This does not include the MMU
- * setup, BATs, etc... but rather the "special" registers
- * like HID0, HID1, HID4, etc...
- */
-_GLOBAL(__save_cpu_setup)
- /* Some CR fields are volatile, we back it up all */
- mfcr r7
-
- /* Get storage ptr */
- LOADADDR(r5,cpu_state_storage)
-
- /* We only deal with 970 for now */
- mfspr r0,SPRN_PVR
- srwi r0,r0,16
- cmpwi r0,0x39
- beq 1f
- cmpwi r0,0x3c
- beq 1f
- cmpwi r0,0x44
- bne 2f
-
-1: /* Save HID0,1,4 and 5 */
- mfspr r3,SPRN_HID0
- std r3,CS_HID0(r5)
- mfspr r3,SPRN_HID1
- std r3,CS_HID1(r5)
- mfspr r3,SPRN_HID4
- std r3,CS_HID4(r5)
- mfspr r3,SPRN_HID5
- std r3,CS_HID5(r5)
-
-2:
- mtcr r7
- blr
-
-/* Called with no MMU context (typically MSR:IR/DR off) to
- * restore CPU state as backed up by the previous
- * function. This does not include cache setting
- */
-_GLOBAL(__restore_cpu_setup)
- /* Get storage ptr (FIXME when using anton reloc as we
- * are running with translation disabled here
- */
- LOADADDR(r5,cpu_state_storage)
-
- /* We only deal with 970 for now */
- mfspr r0,SPRN_PVR
- srwi r0,r0,16
- cmpwi r0,0x39
- beq 1f
- cmpwi r0,0x3c
- beq 1f
- cmpwi r0,0x44
- bnelr
-
-1: /* Before accessing memory, we make sure rm_ci is clear */
- li r0,0
- mfspr r3,SPRN_HID4
- rldimi r3,r0,40,23 /* clear bit 23 (rm_ci) */
- sync
- mtspr SPRN_HID4,r3
- isync
- sync
-
- /* Clear interrupt prefix */
- li r0,0
- sync
- mtspr SPRN_HIOR,0
- isync
-
- /* Restore HID0 */
- ld r3,CS_HID0(r5)
- sync
- isync
- mtspr SPRN_HID0,r3
- mfspr r3,SPRN_HID0
- mfspr r3,SPRN_HID0
- mfspr r3,SPRN_HID0
- mfspr r3,SPRN_HID0
- mfspr r3,SPRN_HID0
- mfspr r3,SPRN_HID0
- sync
- isync
-
- /* Restore HID1 */
- ld r3,CS_HID1(r5)
- sync
- isync
- mtspr SPRN_HID1,r3
- mtspr SPRN_HID1,r3
- sync
- isync
-
- /* Restore HID4 */
- ld r3,CS_HID4(r5)
- sync
- isync
- mtspr SPRN_HID4,r3
- sync
- isync
-
- /* Restore HID5 */
- ld r3,CS_HID5(r5)
- sync
- isync
- mtspr SPRN_HID5,r3
- sync
- isync
- blr
-
+++ /dev/null
-/*
- * arch/ppc64/kernel/firmware.c
- *
- * Extracted from cputable.c
- *
- * Copyright (C) 2001 Ben. Herrenschmidt (benh@kernel.crashing.org)
- *
- * Modifications for ppc64:
- * Copyright (C) 2003 Dave Engebretsen <engebret@us.ibm.com>
- * Copyright (C) 2005 Stephen Rothwell, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-
-#include <asm/firmware.h>
-
-unsigned long ppc64_firmware_features;
-
-#ifdef CONFIG_PPC_PSERIES
-firmware_feature_t firmware_features_table[FIRMWARE_MAX_FEATURES] = {
- {FW_FEATURE_PFT, "hcall-pft"},
- {FW_FEATURE_TCE, "hcall-tce"},
- {FW_FEATURE_SPRG0, "hcall-sprg0"},
- {FW_FEATURE_DABR, "hcall-dabr"},
- {FW_FEATURE_COPY, "hcall-copy"},
- {FW_FEATURE_ASR, "hcall-asr"},
- {FW_FEATURE_DEBUG, "hcall-debug"},
- {FW_FEATURE_PERF, "hcall-perf"},
- {FW_FEATURE_DUMP, "hcall-dump"},
- {FW_FEATURE_INTERRUPT, "hcall-interrupt"},
- {FW_FEATURE_MIGRATE, "hcall-migrate"},
- {FW_FEATURE_PERFMON, "hcall-perfmon"},
- {FW_FEATURE_CRQ, "hcall-crq"},
- {FW_FEATURE_VIO, "hcall-vio"},
- {FW_FEATURE_RDMA, "hcall-rdma"},
- {FW_FEATURE_LLAN, "hcall-lLAN"},
- {FW_FEATURE_BULK, "hcall-bulk"},
- {FW_FEATURE_XDABR, "hcall-xdabr"},
- {FW_FEATURE_MULTITCE, "hcall-multi-tce"},
- {FW_FEATURE_SPLPAR, "hcall-splpar"},
-};
-#endif
+++ /dev/null
-/*
- * ioctl32.c: Conversion between 32bit and 64bit native ioctls.
- *
- * Based on sparc64 ioctl32.c by:
- *
- * Copyright (C) 1997-2000 Jakub Jelinek (jakub@redhat.com)
- * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
- *
- * ppc64 changes:
- *
- * Copyright (C) 2000 Ken Aaker (kdaaker@rchland.vnet.ibm.com)
- * Copyright (C) 2001 Anton Blanchard (antonb@au.ibm.com)
- *
- * These routines maintain argument size conversion between 32bit and 64bit
- * ioctls.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#define INCLUDES
-#include "compat_ioctl.c"
-#include <linux/syscalls.h>
-
-#define CODE
-#include "compat_ioctl.c"
-
-#define HANDLE_IOCTL(cmd,handler) { cmd, (ioctl_trans_handler_t)handler, NULL },
-#define COMPATIBLE_IOCTL(cmd) HANDLE_IOCTL(cmd,sys_ioctl)
-
-#define IOCTL_TABLE_START \
- struct ioctl_trans ioctl_start[] = {
-#define IOCTL_TABLE_END \
- };
-
-IOCTL_TABLE_START
-#include <linux/compat_ioctl.h>
-#define DECLARES
-#include "compat_ioctl.c"
-
-/* Little p (/dev/rtc, /dev/envctrl, etc.) */
-COMPATIBLE_IOCTL(_IOR('p', 20, int[7])) /* RTCGET */
-COMPATIBLE_IOCTL(_IOW('p', 21, int[7])) /* RTCSET */
-
-IOCTL_TABLE_END
-
-int ioctl_table_size = ARRAY_SIZE(ioctl_start);
+++ /dev/null
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/threads.h>
-#include <linux/module.h>
-
-#include <asm/processor.h>
-#include <asm/ptrace.h>
-#include <asm/page.h>
-
-#include <asm/lppaca.h>
-#include <asm/iseries/it_lp_queue.h>
-#include <asm/paca.h>
-
-static union {
- struct systemcfg data;
- u8 page[PAGE_SIZE];
-} systemcfg_store __attribute__((__section__(".data.page.aligned")));
-struct systemcfg *systemcfg = &systemcfg_store.data;
-EXPORT_SYMBOL(systemcfg);
-
-
-/* This symbol is provided by the linker - let it fill in the paca
- * field correctly */
-extern unsigned long __toc_start;
-
-/* The Paca is an array with one entry per processor. Each contains an
- * lppaca, which contains the information shared between the
- * hypervisor and Linux. Each also contains an ItLpRegSave area which
- * is used by the hypervisor to save registers.
- * On systems with hardware multi-threading, there are two threads
- * per processor. The Paca array must contain an entry for each thread.
- * The VPD Areas will give a max logical processors = 2 * max physical
- * processors. The processor VPD array needs one entry per physical
- * processor (not thread).
- */
-#define PACA_INIT_COMMON(number, start, asrr, asrv) \
- .lock_token = 0x8000, \
- .paca_index = (number), /* Paca Index */ \
- .default_decr = 0x00ff0000, /* Initial Decr */ \
- .kernel_toc = (unsigned long)(&__toc_start) + 0x8000UL, \
- .stab_real = (asrr), /* Real pointer to segment table */ \
- .stab_addr = (asrv), /* Virt pointer to segment table */ \
- .cpu_start = (start), /* Processor start */ \
- .hw_cpu_id = 0xffff, \
- .lppaca = { \
- .desc = 0xd397d781, /* "LpPa" */ \
- .size = sizeof(struct lppaca), \
- .dyn_proc_status = 2, \
- .decr_val = 0x00ff0000, \
- .fpregs_in_use = 1, \
- .end_of_quantum = 0xfffffffffffffffful, \
- .slb_count = 64, \
- .vmxregs_in_use = 0, \
- }, \
-
-#ifdef CONFIG_PPC_ISERIES
-#define PACA_INIT_ISERIES(number) \
- .lppaca_ptr = &paca[number].lppaca, \
- .reg_save_ptr = &paca[number].reg_save, \
- .reg_save = { \
- .xDesc = 0xd397d9e2, /* "LpRS" */ \
- .xSize = sizeof(struct ItLpRegSave) \
- }
-
-#define PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number, 0, 0, 0) \
- PACA_INIT_ISERIES(number) \
-}
-
-#define BOOTCPU_PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number, 1, 0, (u64)&initial_stab) \
- PACA_INIT_ISERIES(number) \
-}
-
-#else
-#define PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number, 0, 0, 0) \
-}
-
-#define BOOTCPU_PACA_INIT(number) \
-{ \
- PACA_INIT_COMMON(number, 1, STAB0_PHYS_ADDR, (u64)&initial_stab) \
-}
-#endif
-
-struct paca_struct paca[] = {
- BOOTCPU_PACA_INIT(0),
-#if NR_CPUS > 1
- PACA_INIT( 1), PACA_INIT( 2), PACA_INIT( 3),
-#if NR_CPUS > 4
- PACA_INIT( 4), PACA_INIT( 5), PACA_INIT( 6), PACA_INIT( 7),
-#if NR_CPUS > 8
- PACA_INIT( 8), PACA_INIT( 9), PACA_INIT( 10), PACA_INIT( 11),
- PACA_INIT( 12), PACA_INIT( 13), PACA_INIT( 14), PACA_INIT( 15),
- PACA_INIT( 16), PACA_INIT( 17), PACA_INIT( 18), PACA_INIT( 19),
- PACA_INIT( 20), PACA_INIT( 21), PACA_INIT( 22), PACA_INIT( 23),
- PACA_INIT( 24), PACA_INIT( 25), PACA_INIT( 26), PACA_INIT( 27),
- PACA_INIT( 28), PACA_INIT( 29), PACA_INIT( 30), PACA_INIT( 31),
-#if NR_CPUS > 32
- PACA_INIT( 32), PACA_INIT( 33), PACA_INIT( 34), PACA_INIT( 35),
- PACA_INIT( 36), PACA_INIT( 37), PACA_INIT( 38), PACA_INIT( 39),
- PACA_INIT( 40), PACA_INIT( 41), PACA_INIT( 42), PACA_INIT( 43),
- PACA_INIT( 44), PACA_INIT( 45), PACA_INIT( 46), PACA_INIT( 47),
- PACA_INIT( 48), PACA_INIT( 49), PACA_INIT( 50), PACA_INIT( 51),
- PACA_INIT( 52), PACA_INIT( 53), PACA_INIT( 54), PACA_INIT( 55),
- PACA_INIT( 56), PACA_INIT( 57), PACA_INIT( 58), PACA_INIT( 59),
- PACA_INIT( 60), PACA_INIT( 61), PACA_INIT( 62), PACA_INIT( 63),
-#if NR_CPUS > 64
- PACA_INIT( 64), PACA_INIT( 65), PACA_INIT( 66), PACA_INIT( 67),
- PACA_INIT( 68), PACA_INIT( 69), PACA_INIT( 70), PACA_INIT( 71),
- PACA_INIT( 72), PACA_INIT( 73), PACA_INIT( 74), PACA_INIT( 75),
- PACA_INIT( 76), PACA_INIT( 77), PACA_INIT( 78), PACA_INIT( 79),
- PACA_INIT( 80), PACA_INIT( 81), PACA_INIT( 82), PACA_INIT( 83),
- PACA_INIT( 84), PACA_INIT( 85), PACA_INIT( 86), PACA_INIT( 87),
- PACA_INIT( 88), PACA_INIT( 89), PACA_INIT( 90), PACA_INIT( 91),
- PACA_INIT( 92), PACA_INIT( 93), PACA_INIT( 94), PACA_INIT( 95),
- PACA_INIT( 96), PACA_INIT( 97), PACA_INIT( 98), PACA_INIT( 99),
- PACA_INIT(100), PACA_INIT(101), PACA_INIT(102), PACA_INIT(103),
- PACA_INIT(104), PACA_INIT(105), PACA_INIT(106), PACA_INIT(107),
- PACA_INIT(108), PACA_INIT(109), PACA_INIT(110), PACA_INIT(111),
- PACA_INIT(112), PACA_INIT(113), PACA_INIT(114), PACA_INIT(115),
- PACA_INIT(116), PACA_INIT(117), PACA_INIT(118), PACA_INIT(119),
- PACA_INIT(120), PACA_INIT(121), PACA_INIT(122), PACA_INIT(123),
- PACA_INIT(124), PACA_INIT(125), PACA_INIT(126), PACA_INIT(127),
-#endif
-#endif
-#endif
-#endif
-#endif
-};
-EXPORT_SYMBOL(paca);
--- /dev/null
+#ifndef _ASM_POWERPC_ABS_ADDR_H
+#define _ASM_POWERPC_ABS_ADDR_H
+
+#include <linux/config.h>
+
+/*
+ * c 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <asm/types.h>
+#include <asm/page.h>
+#include <asm/prom.h>
+#include <asm/lmb.h>
+#include <asm/firmware.h>
+
+struct mschunks_map {
+ unsigned long num_chunks;
+ unsigned long chunk_size;
+ unsigned long chunk_shift;
+ unsigned long chunk_mask;
+ u32 *mapping;
+};
+
+extern struct mschunks_map mschunks_map;
+
+/* Chunks are 256 KB */
+#define MSCHUNKS_CHUNK_SHIFT (18)
+#define MSCHUNKS_CHUNK_SIZE (1UL << MSCHUNKS_CHUNK_SHIFT)
+#define MSCHUNKS_OFFSET_MASK (MSCHUNKS_CHUNK_SIZE - 1)
+
+static inline unsigned long chunk_to_addr(unsigned long chunk)
+{
+ return chunk << MSCHUNKS_CHUNK_SHIFT;
+}
+
+static inline unsigned long addr_to_chunk(unsigned long addr)
+{
+ return addr >> MSCHUNKS_CHUNK_SHIFT;
+}
+
+static inline unsigned long phys_to_abs(unsigned long pa)
+{
+ unsigned long chunk;
+
+ /* This is a no-op on non-iSeries */
+ if (!firmware_has_feature(FW_FEATURE_ISERIES))
+ return pa;
+
+ chunk = addr_to_chunk(pa);
+
+ if (chunk < mschunks_map.num_chunks)
+ chunk = mschunks_map.mapping[chunk];
+
+ return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK);
+}
+
+/* Convenience macros */
+#define virt_to_abs(va) phys_to_abs(__pa(va))
+#define abs_to_virt(aa) __va(aa)
+
+/*
+ * Converts Virtual Address to Real Address for
+ * Legacy iSeries Hypervisor calls
+ */
+#define iseries_hv_addr(virtaddr) \
+ (0x8000000000000000 | virt_to_abs(virtaddr))
+
+#endif /* _ASM_POWERPC_ABS_ADDR_H */
--- /dev/null
+#ifndef _ASM_POWERPC_COMPAT_H
+#define _ASM_POWERPC_COMPAT_H
+/*
+ * Architecture specific compatibility types
+ */
+#include <linux/types.h>
+#include <linux/sched.h>
+
+#define COMPAT_USER_HZ 100
+
+typedef u32 compat_size_t;
+typedef s32 compat_ssize_t;
+typedef s32 compat_time_t;
+typedef s32 compat_clock_t;
+typedef s32 compat_pid_t;
+typedef u32 __compat_uid_t;
+typedef u32 __compat_gid_t;
+typedef u32 __compat_uid32_t;
+typedef u32 __compat_gid32_t;
+typedef u32 compat_mode_t;
+typedef u32 compat_ino_t;
+typedef u32 compat_dev_t;
+typedef s32 compat_off_t;
+typedef s64 compat_loff_t;
+typedef s16 compat_nlink_t;
+typedef u16 compat_ipc_pid_t;
+typedef s32 compat_daddr_t;
+typedef u32 compat_caddr_t;
+typedef __kernel_fsid_t compat_fsid_t;
+typedef s32 compat_key_t;
+typedef s32 compat_timer_t;
+
+typedef s32 compat_int_t;
+typedef s32 compat_long_t;
+typedef u32 compat_uint_t;
+typedef u32 compat_ulong_t;
+
+struct compat_timespec {
+ compat_time_t tv_sec;
+ s32 tv_nsec;
+};
+
+struct compat_timeval {
+ compat_time_t tv_sec;
+ s32 tv_usec;
+};
+
+struct compat_stat {
+ compat_dev_t st_dev;
+ compat_ino_t st_ino;
+ compat_mode_t st_mode;
+ compat_nlink_t st_nlink;
+ __compat_uid32_t st_uid;
+ __compat_gid32_t st_gid;
+ compat_dev_t st_rdev;
+ compat_off_t st_size;
+ compat_off_t st_blksize;
+ compat_off_t st_blocks;
+ compat_time_t st_atime;
+ u32 st_atime_nsec;
+ compat_time_t st_mtime;
+ u32 st_mtime_nsec;
+ compat_time_t st_ctime;
+ u32 st_ctime_nsec;
+ u32 __unused4[2];
+};
+
+struct compat_flock {
+ short l_type;
+ short l_whence;
+ compat_off_t l_start;
+ compat_off_t l_len;
+ compat_pid_t l_pid;
+};
+
+#define F_GETLK64 12 /* using 'struct flock64' */
+#define F_SETLK64 13
+#define F_SETLKW64 14
+
+struct compat_flock64 {
+ short l_type;
+ short l_whence;
+ compat_loff_t l_start;
+ compat_loff_t l_len;
+ compat_pid_t l_pid;
+};
+
+struct compat_statfs {
+ int f_type;
+ int f_bsize;
+ int f_blocks;
+ int f_bfree;
+ int f_bavail;
+ int f_files;
+ int f_ffree;
+ compat_fsid_t f_fsid;
+ int f_namelen; /* SunOS ignores this field. */
+ int f_frsize;
+ int f_spare[5];
+};
+
+#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff
+#define COMPAT_RLIM_INFINITY 0xffffffff
+
+typedef u32 compat_old_sigset_t;
+
+#define _COMPAT_NSIG 64
+#define _COMPAT_NSIG_BPW 32
+
+typedef u32 compat_sigset_word;
+
+#define COMPAT_OFF_T_MAX 0x7fffffff
+#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
+
+/*
+ * A pointer passed in from user mode. This should not
+ * be used for syscall parameters, just declare them
+ * as pointers because the syscall entry code will have
+ * appropriately comverted them already.
+ */
+typedef u32 compat_uptr_t;
+
+static inline void __user *compat_ptr(compat_uptr_t uptr)
+{
+ return (void __user *)(unsigned long)uptr;
+}
+
+static inline void __user *compat_alloc_user_space(long len)
+{
+ struct pt_regs *regs = current->thread.regs;
+ unsigned long usp = regs->gpr[1];
+
+ /*
+ * We cant access below the stack pointer in the 32bit ABI and
+ * can access 288 bytes in the 64bit ABI
+ */
+ if (!(test_thread_flag(TIF_32BIT)))
+ usp -= 288;
+
+ return (void __user *) (usp - len);
+}
+
+/*
+ * ipc64_perm is actually 32/64bit clean but since the compat layer refers to
+ * it we may as well define it.
+ */
+struct compat_ipc64_perm {
+ compat_key_t key;
+ __compat_uid_t uid;
+ __compat_gid_t gid;
+ __compat_uid_t cuid;
+ __compat_gid_t cgid;
+ compat_mode_t mode;
+ unsigned int seq;
+ unsigned int __pad2;
+ unsigned long __unused1; /* yes they really are 64bit pads */
+ unsigned long __unused2;
+};
+
+struct compat_semid64_ds {
+ struct compat_ipc64_perm sem_perm;
+ unsigned int __unused1;
+ compat_time_t sem_otime;
+ unsigned int __unused2;
+ compat_time_t sem_ctime;
+ compat_ulong_t sem_nsems;
+ compat_ulong_t __unused3;
+ compat_ulong_t __unused4;
+};
+
+struct compat_msqid64_ds {
+ struct compat_ipc64_perm msg_perm;
+ unsigned int __unused1;
+ compat_time_t msg_stime;
+ unsigned int __unused2;
+ compat_time_t msg_rtime;
+ unsigned int __unused3;
+ compat_time_t msg_ctime;
+ compat_ulong_t msg_cbytes;
+ compat_ulong_t msg_qnum;
+ compat_ulong_t msg_qbytes;
+ compat_pid_t msg_lspid;
+ compat_pid_t msg_lrpid;
+ compat_ulong_t __unused4;
+ compat_ulong_t __unused5;
+};
+
+struct compat_shmid64_ds {
+ struct compat_ipc64_perm shm_perm;
+ unsigned int __unused1;
+ compat_time_t shm_atime;
+ unsigned int __unused2;
+ compat_time_t shm_dtime;
+ unsigned int __unused3;
+ compat_time_t shm_ctime;
+ unsigned int __unused4;
+ compat_size_t shm_segsz;
+ compat_pid_t shm_cpid;
+ compat_pid_t shm_lpid;
+ compat_ulong_t shm_nattch;
+ compat_ulong_t __unused5;
+ compat_ulong_t __unused6;
+};
+
+#endif /* _ASM_POWERPC_COMPAT_H */
--- /dev/null
+/*
+ * lppaca.h
+ * Copyright (C) 2001 Mike Corrigan IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef _ASM_POWERPC_LPPACA_H
+#define _ASM_POWERPC_LPPACA_H
+
+//=============================================================================
+//
+// This control block contains the data that is shared between the
+// hypervisor (PLIC) and the OS.
+//
+//
+//----------------------------------------------------------------------------
+#include <asm/types.h>
+
+struct lppaca {
+//=============================================================================
+// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data
+// NOTE: The xDynXyz fields are fields that will be dynamically changed by
+// PLIC when preparing to bring a processor online or when dispatching a
+// virtual processor!
+//=============================================================================
+ u32 desc; // Eye catcher 0xD397D781 x00-x03
+ u16 size; // Size of this struct x04-x05
+ u16 reserved1; // Reserved x06-x07
+ u16 reserved2:14; // Reserved x08-x09
+ u8 shared_proc:1; // Shared processor indicator ...
+ u8 secondary_thread:1; // Secondary thread indicator ...
+ volatile u8 dyn_proc_status:8; // Dynamic Status of this proc x0A-x0A
+ u8 secondary_thread_count; // Secondary thread count x0B-x0B
+ volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D
+ volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F
+ u32 decr_val; // Value for Decr programming x10-x13
+ u32 pmc_val; // Value for PMC regs x14-x17
+ volatile u32 dyn_hw_node_id; // Dynamic Hardware Node id x18-x1B
+ volatile u32 dyn_hw_proc_id; // Dynamic Hardware Proc Id x1C-x1F
+ volatile u32 dyn_pir; // Dynamic ProcIdReg value x20-x23
+ u32 dsei_data; // DSEI data x24-x27
+ u64 sprg3; // SPRG3 value x28-x2F
+ u8 reserved3[80]; // Reserved x30-x7F
+
+//=============================================================================
+// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data
+//=============================================================================
+ // This Dword contains a byte for each type of interrupt that can occur.
+ // The IPI is a count while the others are just a binary 1 or 0.
+ union {
+ u64 any_int;
+ struct {
+ u16 reserved; // Reserved - cleared by #mpasmbl
+ u8 xirr_int; // Indicates xXirrValue is valid or Immed IO
+ u8 ipi_cnt; // IPI Count
+ u8 decr_int; // DECR interrupt occurred
+ u8 pdc_int; // PDC interrupt occurred
+ u8 quantum_int; // Interrupt quantum reached
+ u8 old_plic_deferred_ext_int; // Old PLIC has a deferred XIRR pending
+ } fields;
+ } int_dword;
+
+ // Whenever any fields in this Dword are set then PLIC will defer the
+ // processing of external interrupts. Note that PLIC will store the
+ // XIRR directly into the xXirrValue field so that another XIRR will
+ // not be presented until this one clears. The layout of the low
+ // 4-bytes of this Dword is upto SLIC - PLIC just checks whether the
+ // entire Dword is zero or not. A non-zero value in the low order
+ // 2-bytes will result in SLIC being granted the highest thread
+ // priority upon return. A 0 will return to SLIC as medium priority.
+ u64 plic_defer_ints_area; // Entire Dword
+
+ // Used to pass the real SRR0/1 from PLIC to SLIC as well as to
+ // pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid.
+ u64 saved_srr0; // Saved SRR0 x10-x17
+ u64 saved_srr1; // Saved SRR1 x18-x1F
+
+ // Used to pass parms from the OS to PLIC for SetAsrAndRfid
+ u64 saved_gpr3; // Saved GPR3 x20-x27
+ u64 saved_gpr4; // Saved GPR4 x28-x2F
+ u64 saved_gpr5; // Saved GPR5 x30-x37
+
+ u8 reserved4; // Reserved x38-x38
+ u8 cpuctls_task_attrs; // Task attributes for cpuctls x39-x39
+ u8 fpregs_in_use; // FP regs in use x3A-x3A
+ u8 pmcregs_in_use; // PMC regs in use x3B-x3B
+ volatile u32 saved_decr; // Saved Decr Value x3C-x3F
+ volatile u64 emulated_time_base;// Emulated TB for this thread x40-x47
+ volatile u64 cur_plic_latency; // Unaccounted PLIC latency x48-x4F
+ u64 tot_plic_latency; // Accumulated PLIC latency x50-x57
+ u64 wait_state_cycles; // Wait cycles for this proc x58-x5F
+ u64 end_of_quantum; // TB at end of quantum x60-x67
+ u64 pdc_saved_sprg1; // Saved SPRG1 for PMC int x68-x6F
+ u64 pdc_saved_srr0; // Saved SRR0 for PMC int x70-x77
+ volatile u32 virtual_decr; // Virtual DECR for shared procsx78-x7B
+ u16 slb_count; // # of SLBs to maintain x7C-x7D
+ u8 idle; // Indicate OS is idle x7E
+ u8 vmxregs_in_use; // VMX registers in use x7F
+
+
+//=============================================================================
+// CACHE_LINE_3 0x0100 - 0x007F: This line is shared with other processors
+//=============================================================================
+ // This is the yield_count. An "odd" value (low bit on) means that
+ // the processor is yielded (either because of an OS yield or a PLIC
+ // preempt). An even value implies that the processor is currently
+ // executing.
+ // NOTE: This value will ALWAYS be zero for dedicated processors and
+ // will NEVER be zero for shared processors (ie, initialized to a 1).
+ volatile u32 yield_count; // PLIC increments each dispatchx00-x03
+ u8 reserved6[124]; // Reserved x04-x7F
+
+//=============================================================================
+// CACHE_LINE_4-5 0x0100 - 0x01FF Contains PMC interrupt data
+//=============================================================================
+ u8 pmc_save_area[256]; // PMC interrupt Area x00-xFF
+};
+
+#endif /* _ASM_POWERPC_LPPACA_H */
--- /dev/null
+/*
+ * include/asm-powerpc/paca.h
+ *
+ * This control block defines the PACA which defines the processor
+ * specific data for each logical processor on the system.
+ * There are some pointers defined that are utilized by PLIC.
+ *
+ * C 2001 PPC 64 Team, IBM Corp
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+#ifndef _ASM_POWERPC_PACA_H
+#define _ASM_POWERPC_PACA_H
+
+#include <linux/config.h>
+#include <asm/types.h>
+#include <asm/lppaca.h>
+#include <asm/iseries/it_lp_reg_save.h>
+#include <asm/mmu.h>
+
+register struct paca_struct *local_paca asm("r13");
+#define get_paca() local_paca
+
+struct task_struct;
+
+/*
+ * Defines the layout of the paca.
+ *
+ * This structure is not directly accessed by firmware or the service
+ * processor except for the first two pointers that point to the
+ * lppaca area and the ItLpRegSave area for this CPU. Both the
+ * lppaca and ItLpRegSave objects are currently contained within the
+ * PACA but they do not need to be.
+ */
+struct paca_struct {
+ /*
+ * Because hw_cpu_id, unlike other paca fields, is accessed
+ * routinely from other CPUs (from the IRQ code), we stick to
+ * read-only (after boot) fields in the first cacheline to
+ * avoid cacheline bouncing.
+ */
+
+ /*
+ * MAGIC: These first two pointers can't be moved - they're
+ * accessed by the firmware
+ */
+ struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
+ struct ItLpRegSave *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
+
+ /*
+ * MAGIC: the spinlock functions in arch/ppc64/lib/locks.c
+ * load lock_token and paca_index with a single lwz
+ * instruction. They must travel together and be properly
+ * aligned.
+ */
+ u16 lock_token; /* Constant 0x8000, used in locks */
+ u16 paca_index; /* Logical processor number */
+
+ u32 default_decr; /* Default decrementer value */
+ u64 kernel_toc; /* Kernel TOC address */
+ u64 stab_real; /* Absolute address of segment table */
+ u64 stab_addr; /* Virtual address of segment table */
+ void *emergency_sp; /* pointer to emergency stack */
+ s16 hw_cpu_id; /* Physical processor number */
+ u8 cpu_start; /* At startup, processor spins until */
+ /* this becomes non-zero. */
+
+ /*
+ * Now, starting in cacheline 2, the exception save areas
+ */
+ /* used for most interrupts/exceptions */
+ u64 exgen[10] __attribute__((aligned(0x80)));
+ u64 exmc[10]; /* used for machine checks */
+ u64 exslb[10]; /* used for SLB/segment table misses
+ * on the linear mapping */
+#ifdef CONFIG_PPC_64K_PAGES
+ pgd_t *pgdir;
+#endif /* CONFIG_PPC_64K_PAGES */
+
+ mm_context_t context;
+ u16 slb_cache[SLB_CACHE_ENTRIES];
+ u16 slb_cache_ptr;
+
+ /*
+ * then miscellaneous read-write fields
+ */
+ struct task_struct *__current; /* Pointer to current */
+ u64 kstack; /* Saved Kernel stack addr */
+ u64 stab_rr; /* stab/slb round-robin counter */
+ u64 next_jiffy_update_tb; /* TB value for next jiffy update */
+ u64 saved_r1; /* r1 save for RTAS calls */
+ u64 saved_msr; /* MSR saved here by enter_rtas */
+ u8 proc_enabled; /* irq soft-enable flag */
+
+ /* not yet used */
+ u64 exdsi[8]; /* used for linear mapping hash table misses */
+
+ /*
+ * iSeries structure which the hypervisor knows about -
+ * this structure should not cross a page boundary.
+ * The vpa_init/register_vpa call is now known to fail if the
+ * lppaca structure crosses a page boundary.
+ * The lppaca is also used on POWER5 pSeries boxes.
+ * The lppaca is 640 bytes long, and cannot readily change
+ * since the hypervisor knows its layout, so a 1kB
+ * alignment will suffice to ensure that it doesn't
+ * cross a page boundary.
+ */
+ struct lppaca lppaca __attribute__((__aligned__(0x400)));
+#ifdef CONFIG_PPC_ISERIES
+ struct ItLpRegSave reg_save;
+#endif
+};
+
+extern struct paca_struct paca[];
+
+#endif /* _ASM_POWERPC_PACA_H */
--- /dev/null
+/*
+ * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
+ * Rewrite, cleanup:
+ * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef _ASM_POWERPC_TCE_H
+#define _ASM_POWERPC_TCE_H
+
+/*
+ * Tces come in two formats, one for the virtual bus and a different
+ * format for PCI
+ */
+#define TCE_VB 0
+#define TCE_PCI 1
+
+/* TCE page size is 4096 bytes (1 << 12) */
+
+#define TCE_SHIFT 12
+#define TCE_PAGE_SIZE (1 << TCE_SHIFT)
+#define TCE_PAGE_FACTOR (PAGE_SHIFT - TCE_SHIFT)
+
+
+/* tce_entry
+ * Used by pSeries (SMP) and iSeries/pSeries LPAR, but there it's
+ * abstracted so layout is irrelevant.
+ */
+union tce_entry {
+ unsigned long te_word;
+ struct {
+ unsigned int tb_cacheBits :6; /* Cache hash bits - not used */
+ unsigned int tb_rsvd :6;
+ unsigned long tb_rpn :40; /* Real page number */
+ unsigned int tb_valid :1; /* Tce is valid (vb only) */
+ unsigned int tb_allio :1; /* Tce is valid for all lps (vb only) */
+ unsigned int tb_lpindex :8; /* LpIndex for user of TCE (vb only) */
+ unsigned int tb_pciwr :1; /* Write allowed (pci only) */
+ unsigned int tb_rdwr :1; /* Read allowed (pci), Write allowed (vb) */
+ } te_bits;
+#define te_cacheBits te_bits.tb_cacheBits
+#define te_rpn te_bits.tb_rpn
+#define te_valid te_bits.tb_valid
+#define te_allio te_bits.tb_allio
+#define te_lpindex te_bits.tb_lpindex
+#define te_pciwr te_bits.tb_pciwr
+#define te_rdwr te_bits.tb_rdwr
+};
+
+
+#endif /* _ASM_POWERPC_TCE_H */
+++ /dev/null
-#ifndef _ABS_ADDR_H
-#define _ABS_ADDR_H
-
-#include <linux/config.h>
-
-/*
- * c 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <asm/types.h>
-#include <asm/page.h>
-#include <asm/prom.h>
-#include <asm/lmb.h>
-#include <asm/firmware.h>
-
-struct mschunks_map {
- unsigned long num_chunks;
- unsigned long chunk_size;
- unsigned long chunk_shift;
- unsigned long chunk_mask;
- u32 *mapping;
-};
-
-extern struct mschunks_map mschunks_map;
-
-/* Chunks are 256 KB */
-#define MSCHUNKS_CHUNK_SHIFT (18)
-#define MSCHUNKS_CHUNK_SIZE (1UL << MSCHUNKS_CHUNK_SHIFT)
-#define MSCHUNKS_OFFSET_MASK (MSCHUNKS_CHUNK_SIZE - 1)
-
-static inline unsigned long chunk_to_addr(unsigned long chunk)
-{
- return chunk << MSCHUNKS_CHUNK_SHIFT;
-}
-
-static inline unsigned long addr_to_chunk(unsigned long addr)
-{
- return addr >> MSCHUNKS_CHUNK_SHIFT;
-}
-
-static inline unsigned long phys_to_abs(unsigned long pa)
-{
- unsigned long chunk;
-
- /* This is a no-op on non-iSeries */
- if (!firmware_has_feature(FW_FEATURE_ISERIES))
- return pa;
-
- chunk = addr_to_chunk(pa);
-
- if (chunk < mschunks_map.num_chunks)
- chunk = mschunks_map.mapping[chunk];
-
- return chunk_to_addr(chunk) + (pa & MSCHUNKS_OFFSET_MASK);
-}
-
-/* Convenience macros */
-#define virt_to_abs(va) phys_to_abs(__pa(va))
-#define abs_to_virt(aa) __va(aa)
-
-/*
- * Converts Virtual Address to Real Address for
- * Legacy iSeries Hypervisor calls
- */
-#define iseries_hv_addr(virtaddr) \
- (0x8000000000000000 | virt_to_abs(virtaddr))
-
-#endif /* _ABS_ADDR_H */
+++ /dev/null
-#ifndef _ASM_PPC64_COMPAT_H
-#define _ASM_PPC64_COMPAT_H
-/*
- * Architecture specific compatibility types
- */
-#include <linux/types.h>
-#include <linux/sched.h>
-
-#define COMPAT_USER_HZ 100
-
-typedef u32 compat_size_t;
-typedef s32 compat_ssize_t;
-typedef s32 compat_time_t;
-typedef s32 compat_clock_t;
-typedef s32 compat_pid_t;
-typedef u32 __compat_uid_t;
-typedef u32 __compat_gid_t;
-typedef u32 __compat_uid32_t;
-typedef u32 __compat_gid32_t;
-typedef u32 compat_mode_t;
-typedef u32 compat_ino_t;
-typedef u32 compat_dev_t;
-typedef s32 compat_off_t;
-typedef s64 compat_loff_t;
-typedef s16 compat_nlink_t;
-typedef u16 compat_ipc_pid_t;
-typedef s32 compat_daddr_t;
-typedef u32 compat_caddr_t;
-typedef __kernel_fsid_t compat_fsid_t;
-typedef s32 compat_key_t;
-typedef s32 compat_timer_t;
-
-typedef s32 compat_int_t;
-typedef s32 compat_long_t;
-typedef u32 compat_uint_t;
-typedef u32 compat_ulong_t;
-
-struct compat_timespec {
- compat_time_t tv_sec;
- s32 tv_nsec;
-};
-
-struct compat_timeval {
- compat_time_t tv_sec;
- s32 tv_usec;
-};
-
-struct compat_stat {
- compat_dev_t st_dev;
- compat_ino_t st_ino;
- compat_mode_t st_mode;
- compat_nlink_t st_nlink;
- __compat_uid32_t st_uid;
- __compat_gid32_t st_gid;
- compat_dev_t st_rdev;
- compat_off_t st_size;
- compat_off_t st_blksize;
- compat_off_t st_blocks;
- compat_time_t st_atime;
- u32 st_atime_nsec;
- compat_time_t st_mtime;
- u32 st_mtime_nsec;
- compat_time_t st_ctime;
- u32 st_ctime_nsec;
- u32 __unused4[2];
-};
-
-struct compat_flock {
- short l_type;
- short l_whence;
- compat_off_t l_start;
- compat_off_t l_len;
- compat_pid_t l_pid;
-};
-
-#define F_GETLK64 12 /* using 'struct flock64' */
-#define F_SETLK64 13
-#define F_SETLKW64 14
-
-struct compat_flock64 {
- short l_type;
- short l_whence;
- compat_loff_t l_start;
- compat_loff_t l_len;
- compat_pid_t l_pid;
-};
-
-struct compat_statfs {
- int f_type;
- int f_bsize;
- int f_blocks;
- int f_bfree;
- int f_bavail;
- int f_files;
- int f_ffree;
- compat_fsid_t f_fsid;
- int f_namelen; /* SunOS ignores this field. */
- int f_frsize;
- int f_spare[5];
-};
-
-#define COMPAT_RLIM_OLD_INFINITY 0x7fffffff
-#define COMPAT_RLIM_INFINITY 0xffffffff
-
-typedef u32 compat_old_sigset_t;
-
-#define _COMPAT_NSIG 64
-#define _COMPAT_NSIG_BPW 32
-
-typedef u32 compat_sigset_word;
-
-#define COMPAT_OFF_T_MAX 0x7fffffff
-#define COMPAT_LOFF_T_MAX 0x7fffffffffffffffL
-
-/*
- * A pointer passed in from user mode. This should not
- * be used for syscall parameters, just declare them
- * as pointers because the syscall entry code will have
- * appropriately comverted them already.
- */
-typedef u32 compat_uptr_t;
-
-static inline void __user *compat_ptr(compat_uptr_t uptr)
-{
- return (void __user *)(unsigned long)uptr;
-}
-
-static inline void __user *compat_alloc_user_space(long len)
-{
- struct pt_regs *regs = current->thread.regs;
- unsigned long usp = regs->gpr[1];
-
- /*
- * We cant access below the stack pointer in the 32bit ABI and
- * can access 288 bytes in the 64bit ABI
- */
- if (!(test_thread_flag(TIF_32BIT)))
- usp -= 288;
-
- return (void __user *) (usp - len);
-}
-
-/*
- * ipc64_perm is actually 32/64bit clean but since the compat layer refers to
- * it we may as well define it.
- */
-struct compat_ipc64_perm {
- compat_key_t key;
- __compat_uid_t uid;
- __compat_gid_t gid;
- __compat_uid_t cuid;
- __compat_gid_t cgid;
- compat_mode_t mode;
- unsigned int seq;
- unsigned int __pad2;
- unsigned long __unused1; /* yes they really are 64bit pads */
- unsigned long __unused2;
-};
-
-struct compat_semid64_ds {
- struct compat_ipc64_perm sem_perm;
- unsigned int __unused1;
- compat_time_t sem_otime;
- unsigned int __unused2;
- compat_time_t sem_ctime;
- compat_ulong_t sem_nsems;
- compat_ulong_t __unused3;
- compat_ulong_t __unused4;
-};
-
-struct compat_msqid64_ds {
- struct compat_ipc64_perm msg_perm;
- unsigned int __unused1;
- compat_time_t msg_stime;
- unsigned int __unused2;
- compat_time_t msg_rtime;
- unsigned int __unused3;
- compat_time_t msg_ctime;
- compat_ulong_t msg_cbytes;
- compat_ulong_t msg_qnum;
- compat_ulong_t msg_qbytes;
- compat_pid_t msg_lspid;
- compat_pid_t msg_lrpid;
- compat_ulong_t __unused4;
- compat_ulong_t __unused5;
-};
-
-struct compat_shmid64_ds {
- struct compat_ipc64_perm shm_perm;
- unsigned int __unused1;
- compat_time_t shm_atime;
- unsigned int __unused2;
- compat_time_t shm_dtime;
- unsigned int __unused3;
- compat_time_t shm_ctime;
- unsigned int __unused4;
- compat_size_t shm_segsz;
- compat_pid_t shm_cpid;
- compat_pid_t shm_lpid;
- compat_ulong_t shm_nattch;
- compat_ulong_t __unused5;
- compat_ulong_t __unused6;
-};
-
-#endif /* _ASM_PPC64_COMPAT_H */
+++ /dev/null
-/*
- * lppaca.h
- * Copyright (C) 2001 Mike Corrigan IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef _ASM_LPPACA_H
-#define _ASM_LPPACA_H
-
-//=============================================================================
-//
-// This control block contains the data that is shared between the
-// hypervisor (PLIC) and the OS.
-//
-//
-//----------------------------------------------------------------------------
-#include <asm/types.h>
-
-struct lppaca
-{
-//=============================================================================
-// CACHE_LINE_1 0x0000 - 0x007F Contains read-only data
-// NOTE: The xDynXyz fields are fields that will be dynamically changed by
-// PLIC when preparing to bring a processor online or when dispatching a
-// virtual processor!
-//=============================================================================
- u32 desc; // Eye catcher 0xD397D781 x00-x03
- u16 size; // Size of this struct x04-x05
- u16 reserved1; // Reserved x06-x07
- u16 reserved2:14; // Reserved x08-x09
- u8 shared_proc:1; // Shared processor indicator ...
- u8 secondary_thread:1; // Secondary thread indicator ...
- volatile u8 dyn_proc_status:8; // Dynamic Status of this proc x0A-x0A
- u8 secondary_thread_count; // Secondary thread count x0B-x0B
- volatile u16 dyn_hv_phys_proc_index;// Dynamic HV Physical Proc Index0C-x0D
- volatile u16 dyn_hv_log_proc_index;// Dynamic HV Logical Proc Indexx0E-x0F
- u32 decr_val; // Value for Decr programming x10-x13
- u32 pmc_val; // Value for PMC regs x14-x17
- volatile u32 dyn_hw_node_id; // Dynamic Hardware Node id x18-x1B
- volatile u32 dyn_hw_proc_id; // Dynamic Hardware Proc Id x1C-x1F
- volatile u32 dyn_pir; // Dynamic ProcIdReg value x20-x23
- u32 dsei_data; // DSEI data x24-x27
- u64 sprg3; // SPRG3 value x28-x2F
- u8 reserved3[80]; // Reserved x30-x7F
-
-//=============================================================================
-// CACHE_LINE_2 0x0080 - 0x00FF Contains local read-write data
-//=============================================================================
- // This Dword contains a byte for each type of interrupt that can occur.
- // The IPI is a count while the others are just a binary 1 or 0.
- union {
- u64 any_int;
- struct {
- u16 reserved; // Reserved - cleared by #mpasmbl
- u8 xirr_int; // Indicates xXirrValue is valid or Immed IO
- u8 ipi_cnt; // IPI Count
- u8 decr_int; // DECR interrupt occurred
- u8 pdc_int; // PDC interrupt occurred
- u8 quantum_int; // Interrupt quantum reached
- u8 old_plic_deferred_ext_int; // Old PLIC has a deferred XIRR pending
- } fields;
- } int_dword;
-
- // Whenever any fields in this Dword are set then PLIC will defer the
- // processing of external interrupts. Note that PLIC will store the
- // XIRR directly into the xXirrValue field so that another XIRR will
- // not be presented until this one clears. The layout of the low
- // 4-bytes of this Dword is upto SLIC - PLIC just checks whether the
- // entire Dword is zero or not. A non-zero value in the low order
- // 2-bytes will result in SLIC being granted the highest thread
- // priority upon return. A 0 will return to SLIC as medium priority.
- u64 plic_defer_ints_area; // Entire Dword
-
- // Used to pass the real SRR0/1 from PLIC to SLIC as well as to
- // pass the target SRR0/1 from SLIC to PLIC on a SetAsrAndRfid.
- u64 saved_srr0; // Saved SRR0 x10-x17
- u64 saved_srr1; // Saved SRR1 x18-x1F
-
- // Used to pass parms from the OS to PLIC for SetAsrAndRfid
- u64 saved_gpr3; // Saved GPR3 x20-x27
- u64 saved_gpr4; // Saved GPR4 x28-x2F
- u64 saved_gpr5; // Saved GPR5 x30-x37
-
- u8 reserved4; // Reserved x38-x38
- u8 cpuctls_task_attrs; // Task attributes for cpuctls x39-x39
- u8 fpregs_in_use; // FP regs in use x3A-x3A
- u8 pmcregs_in_use; // PMC regs in use x3B-x3B
- volatile u32 saved_decr; // Saved Decr Value x3C-x3F
- volatile u64 emulated_time_base;// Emulated TB for this thread x40-x47
- volatile u64 cur_plic_latency; // Unaccounted PLIC latency x48-x4F
- u64 tot_plic_latency; // Accumulated PLIC latency x50-x57
- u64 wait_state_cycles; // Wait cycles for this proc x58-x5F
- u64 end_of_quantum; // TB at end of quantum x60-x67
- u64 pdc_saved_sprg1; // Saved SPRG1 for PMC int x68-x6F
- u64 pdc_saved_srr0; // Saved SRR0 for PMC int x70-x77
- volatile u32 virtual_decr; // Virtual DECR for shared procsx78-x7B
- u16 slb_count; // # of SLBs to maintain x7C-x7D
- u8 idle; // Indicate OS is idle x7E
- u8 vmxregs_in_use; // VMX registers in use x7F
-
-
-//=============================================================================
-// CACHE_LINE_3 0x0100 - 0x007F: This line is shared with other processors
-//=============================================================================
- // This is the yield_count. An "odd" value (low bit on) means that
- // the processor is yielded (either because of an OS yield or a PLIC
- // preempt). An even value implies that the processor is currently
- // executing.
- // NOTE: This value will ALWAYS be zero for dedicated processors and
- // will NEVER be zero for shared processors (ie, initialized to a 1).
- volatile u32 yield_count; // PLIC increments each dispatchx00-x03
- u8 reserved6[124]; // Reserved x04-x7F
-
-//=============================================================================
-// CACHE_LINE_4-5 0x0100 - 0x01FF Contains PMC interrupt data
-//=============================================================================
- u8 pmc_save_area[256]; // PMC interrupt Area x00-xFF
-};
-
-#endif /* _ASM_LPPACA_H */
+++ /dev/null
-#ifndef _PPC64_PACA_H
-#define _PPC64_PACA_H
-
-/*
- * include/asm-ppc64/paca.h
- *
- * This control block defines the PACA which defines the processor
- * specific data for each logical processor on the system.
- * There are some pointers defined that are utilized by PLIC.
- *
- * C 2001 PPC 64 Team, IBM Corp
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- */
-
-#include <linux/config.h>
-#include <asm/types.h>
-#include <asm/lppaca.h>
-#include <asm/iseries/it_lp_reg_save.h>
-#include <asm/mmu.h>
-
-register struct paca_struct *local_paca asm("r13");
-#define get_paca() local_paca
-
-struct task_struct;
-
-/*
- * Defines the layout of the paca.
- *
- * This structure is not directly accessed by firmware or the service
- * processor except for the first two pointers that point to the
- * lppaca area and the ItLpRegSave area for this CPU. Both the
- * lppaca and ItLpRegSave objects are currently contained within the
- * PACA but they do not need to be.
- */
-struct paca_struct {
- /*
- * Because hw_cpu_id, unlike other paca fields, is accessed
- * routinely from other CPUs (from the IRQ code), we stick to
- * read-only (after boot) fields in the first cacheline to
- * avoid cacheline bouncing.
- */
-
- /*
- * MAGIC: These first two pointers can't be moved - they're
- * accessed by the firmware
- */
- struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
- struct ItLpRegSave *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
-
- /*
- * MAGIC: the spinlock functions in arch/ppc64/lib/locks.c
- * load lock_token and paca_index with a single lwz
- * instruction. They must travel together and be properly
- * aligned.
- */
- u16 lock_token; /* Constant 0x8000, used in locks */
- u16 paca_index; /* Logical processor number */
-
- u32 default_decr; /* Default decrementer value */
- u64 kernel_toc; /* Kernel TOC address */
- u64 stab_real; /* Absolute address of segment table */
- u64 stab_addr; /* Virtual address of segment table */
- void *emergency_sp; /* pointer to emergency stack */
- s16 hw_cpu_id; /* Physical processor number */
- u8 cpu_start; /* At startup, processor spins until */
- /* this becomes non-zero. */
-
- /*
- * Now, starting in cacheline 2, the exception save areas
- */
- /* used for most interrupts/exceptions */
- u64 exgen[10] __attribute__((aligned(0x80)));
- u64 exmc[10]; /* used for machine checks */
- u64 exslb[10]; /* used for SLB/segment table misses
- * on the linear mapping */
-#ifdef CONFIG_PPC_64K_PAGES
- pgd_t *pgdir;
-#endif /* CONFIG_PPC_64K_PAGES */
-
- mm_context_t context;
- u16 slb_cache[SLB_CACHE_ENTRIES];
- u16 slb_cache_ptr;
-
- /*
- * then miscellaneous read-write fields
- */
- struct task_struct *__current; /* Pointer to current */
- u64 kstack; /* Saved Kernel stack addr */
- u64 stab_rr; /* stab/slb round-robin counter */
- u64 next_jiffy_update_tb; /* TB value for next jiffy update */
- u64 saved_r1; /* r1 save for RTAS calls */
- u64 saved_msr; /* MSR saved here by enter_rtas */
- u8 proc_enabled; /* irq soft-enable flag */
-
- /* not yet used */
- u64 exdsi[8]; /* used for linear mapping hash table misses */
-
- /*
- * iSeries structure which the hypervisor knows about -
- * this structure should not cross a page boundary.
- * The vpa_init/register_vpa call is now known to fail if the
- * lppaca structure crosses a page boundary.
- * The lppaca is also used on POWER5 pSeries boxes.
- * The lppaca is 640 bytes long, and cannot readily change
- * since the hypervisor knows its layout, so a 1kB
- * alignment will suffice to ensure that it doesn't
- * cross a page boundary.
- */
- struct lppaca lppaca __attribute__((__aligned__(0x400)));
-#ifdef CONFIG_PPC_ISERIES
- struct ItLpRegSave reg_save;
-#endif
-};
-
-extern struct paca_struct paca[];
-
-#endif /* _PPC64_PACA_H */
+++ /dev/null
-/*
- * Copyright (C) 2001 Mike Corrigan & Dave Engebretsen, IBM Corporation
- * Rewrite, cleanup:
- * Copyright (C) 2004 Olof Johansson <olof@austin.ibm.com>, IBM Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ASM_TCE_H
-#define _ASM_TCE_H
-
-/*
- * Tces come in two formats, one for the virtual bus and a different
- * format for PCI
- */
-#define TCE_VB 0
-#define TCE_PCI 1
-
-/* TCE page size is 4096 bytes (1 << 12) */
-
-#define TCE_SHIFT 12
-#define TCE_PAGE_SIZE (1 << TCE_SHIFT)
-#define TCE_PAGE_FACTOR (PAGE_SHIFT - TCE_SHIFT)
-
-
-/* tce_entry
- * Used by pSeries (SMP) and iSeries/pSeries LPAR, but there it's
- * abstracted so layout is irrelevant.
- */
-union tce_entry {
- unsigned long te_word;
- struct {
- unsigned int tb_cacheBits :6; /* Cache hash bits - not used */
- unsigned int tb_rsvd :6;
- unsigned long tb_rpn :40; /* Real page number */
- unsigned int tb_valid :1; /* Tce is valid (vb only) */
- unsigned int tb_allio :1; /* Tce is valid for all lps (vb only) */
- unsigned int tb_lpindex :8; /* LpIndex for user of TCE (vb only) */
- unsigned int tb_pciwr :1; /* Write allowed (pci only) */
- unsigned int tb_rdwr :1; /* Read allowed (pci), Write allowed (vb) */
- } te_bits;
-#define te_cacheBits te_bits.tb_cacheBits
-#define te_rpn te_bits.tb_rpn
-#define te_valid te_bits.tb_valid
-#define te_allio te_bits.tb_allio
-#define te_lpindex te_bits.tb_lpindex
-#define te_pciwr te_bits.tb_pciwr
-#define te_rdwr te_bits.tb_rdwr
-};
-
-
-#endif
projects / ~shefty / rdma-dev.git / commitdiff