]> git.openfabrics.org - ~emulex/infiniband.git/commitdiff
[media] anysee: add support for Anysee E7 PTC
authorAntti Palosaari <crope@iki.fi>
Tue, 24 May 2011 10:57:34 +0000 (07:57 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Wed, 27 Jul 2011 20:52:07 +0000 (17:52 -0300)
Basically it is just same device as Anysee E7 TC but made for
internal PCI(e) slot and motherboard USB connector.

Cc: info@anysee.com
Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/dvb/dvb-usb/anysee.c
drivers/media/dvb/dvb-usb/anysee.h

index 7c327b54308e30312848d7b9c4c289f28fe2d937..49028aeb563022414c8aabb1366f96d34f57def9 100644 (file)
@@ -419,6 +419,21 @@ static struct isl6423_config anysee_isl6423_config = {
  * IOA[7] TS 1=enabled
  * IOE[5] STV0903 1=enabled
  *
+ * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)"
+ * PCB: 508PTC (rev0.5)
+ * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212)
+ * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff
+ * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4
+ * IOA[7] TS 1=enabled
+ * IOE[4] TDA18212 1=enabled
+ * DVB-C:
+ * IOD[6] ZL10353 0=disabled
+ * IOD[5] TDA10023 1=enabled
+ * IOE[0] IF 1=enabled
+ * DVB-T:
+ * IOD[5] TDA10023 0=disabled
+ * IOD[6] ZL10353 1=enabled
+ * IOE[0] IF 0=enabled
  */
 
 static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
@@ -593,7 +608,9 @@ static int anysee_frontend_attach(struct dvb_usb_adapter *adap)
 
                break;
        case ANYSEE_HW_508TC: /* 18 */
+       case ANYSEE_HW_508PTC: /* 21 */
                /* E7 TC */
+               /* E7 PTC */
 
                /* enable transport stream on IOA[7] */
                ret = anysee_wr_reg_mask(adap->dev, REG_IOA, (1 << 7), 0x80);
@@ -762,7 +779,9 @@ static int anysee_tuner_attach(struct dvb_usb_adapter *adap)
 
                break;
        case ANYSEE_HW_508TC: /* 18 */
+       case ANYSEE_HW_508PTC: /* 21 */
                /* E7 TC */
+               /* E7 PTC */
 
                /* enable tuner on IOE[4] */
                ret = anysee_wr_reg_mask(adap->dev, REG_IOE, (1 << 4), 0x10);
index a7673aa1e007810627876ad9702ec4662607c003..3bec60c5565f6f45f2c6d86a18acdea2e2bf6a56 100644 (file)
@@ -61,13 +61,14 @@ struct anysee_state {
        u8 seq;
 };
 
-#define ANYSEE_HW_02     2 /* E30 */
-#define ANYSEE_HW_507CD  6 /* E30 Plus */
-#define ANYSEE_HW_507DC 10 /* E30 C Plus */
-#define ANYSEE_HW_507SI 11 /* E30 S2 Plus */
-#define ANYSEE_HW_507FA 15 /* E30 Combo Plus / E30 C Plus */
-#define ANYSEE_HW_508TC 18 /* E7 TC */
-#define ANYSEE_HW_508S2 19 /* E7 S2 */
+#define ANYSEE_HW_02      2 /* E30 */
+#define ANYSEE_HW_507CD   6 /* E30 Plus */
+#define ANYSEE_HW_507DC  10 /* E30 C Plus */
+#define ANYSEE_HW_507SI  11 /* E30 S2 Plus */
+#define ANYSEE_HW_507FA  15 /* E30 Combo Plus / E30 C Plus */
+#define ANYSEE_HW_508TC  18 /* E7 TC */
+#define ANYSEE_HW_508S2  19 /* E7 S2 */
+#define ANYSEE_HW_508PTC 21 /* E7 PTC Plus */
 
 #define REG_IOA       0x80 /* Port A (bit addressable) */
 #define REG_IOB       0x90 /* Port B (bit addressable) */